Create a new socket level option to report number of queue overflows

Recently I augmented the AF_PACKET protocol to report the number of frames lost
on the socket receive queue between any two enqueued frames.  This value was
exported via a SOL_PACKET level cmsg.  AFter I completed that work it was
requested that this feature be generalized so that any datagram oriented socket
could make use of this option.  As such I've created this patch, It creates a
new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a
SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue
overflowed between any two given frames.  It also augments the AF_PACKET
protocol to take advantage of this new feature (as it previously did not touch
sk->sk_drops, which this patch uses to record the overflow count).  Tested
successfully by me.

Notes:

1) Unlike my previous patch, this patch simply records the sk_drops value, which
is not a number of drops between packets, but rather a total number of drops.
Deltas must be computed in user space.

2) While this patch currently works with datagram oriented protocols, it will
also be accepted by non-datagram oriented protocols. I'm not sure if thats
agreeable to everyone, but my argument in favor of doing so is that, for those
protocols which aren't applicable to this option, sk_drops will always be zero,
and reporting no drops on a receive queue that isn't used for those
non-participating protocols seems reasonable to me.  This also saves us having
to code in a per-protocol opt in mechanism.

3) This applies cleanly to net-next assuming that commit
97775007 (my af packet cmsg patch) is reverted
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 97775007.

Neil is reimplementing this generically, outside of AF_PACKET.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6 sit: Set relay to 0.0.0.0 directly if relay_prefixlen == 0.

Do not use bit-shift if relay_prefixlen == 0;
relay_prefix << 32 does not result in 0.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6 sit: Fix 6rd relay address.

Relay's address should be extracted from real IPv6 address
instead of configured prefix.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6 sit: Ensure to initialize 6rd parameters.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add iSCSI support for bnx2x devices.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add hardware and software structures for bnx2x devices.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor ring init. code for subsequent 10G patches.  Also add rtnl_lock()
in cnic_uio_open() to prevent race condition with netdev events.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the main CNIC registration, callback, MAC addr. setup functions.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add code to initialize hardware blocks used for iSCSI.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For iSCSI MAC address setup in later patches.
Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the SPQ (slow-path queue) operations will be used
by the cnic code in later patches.
Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rx_ring->sbq_buf_len now holds the length of the mapped portion of the
buffer rather than the overall length.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver has nothing to do, but this marker prevents the event from
showing up 'not handled'.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove explicit setting of error reporting bits.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need PHY drivers to initialize in a static kernel before
the MAC drivers that use them.  So link them in first.

Based upon a report by Felix Radensky.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is somewhat non-sensical to allow selecting wireless
drivers without showing wireless core code options, and
since the wext refactoring this has made it possible to
generate configurations that will not build. Avoid this
and make wireless drivers select the wireless options.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This came in through the patch titled:
    libertas: first stab at cfg80211 support

I only noticed it because it breaks compat-wireless :)
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Reported-by: sujith.manoharan@atheros.com
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch allows the recently added backplane device IDs that support KR
to fail over to KX during link setup.  This is accomplished by the new MAC
link setup function ixgbe_setup_mac_link_smartspeed().  Comments were also
updated to better document the reason for the delays chosen for KX, KX4, BX,
BX4 and KR connections.
Signed-off-by: NDon Skidmore <don.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch will add the device ID for the 82599-based Ethernet
Express Module X520-P2 SFI card.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the EMAC V4 implementations support 16K Tx FIFOs. This
patch adds support for this functionality and fixes typos in the
Tx FIFO size error messages.
Signed-off-by: NDave Mitchell <dmitchell@appliedmicro.com>
Acked-by: NProdyut Hazarika <phazarika@appliedmicro.com>
Acked-by: NVictor Gallardo <vgallardo@appliedmicro.com>
Acked-by: NLoc Ho <lho@appliedmicro.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This was accidentally omitted from one of the previous patches for firmware event
handling.  The handler needs to the enable firmware irq mask when it's done
processing or it may not get any more events interrupts.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call set_multi API after reset recovery.  This was exposed by tripping
tx_timeout.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add wait for NIC fifo and MGMNT fifo to empty before applying reset.
Otherwise broken frames can be processed by management processor and
cause it to hang.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The addresses were being added to the filter properly, but were not
being enabled.  This adds enable bit to filter write.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Broadcast/multicast should always be routed to the default (zeroeth) rx
ring.  Broadcast frames are already routed correctly.  This fixes
routing for multicast frames.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently frames are routed based on their type and MAC address. This
patch adds the port number on which the frame arrived to the routing.
This prevents problems in the case where both interfaces have the same MAC address in
a routing configuration.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix RX queue table size and change from random to default hash values.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

(This patch fixes bug of commit f7734fdf
 title "make TLLAO option for NA packets configurable")

When the IPV6 conf is used, the function sysctl_set_parent is called and the
array addrconf_sysctl is used as a parameter of the function.

The above patch added new conf "force_tllao" into the array addrconf_sysctl,
but the size of the array was not modified, the static allocated size is
DEVCONF_MAX + 1 but the real size is DEVCONF_MAX + 2, so the problem is
that the function sysctl_set_parent accessed wrong address.

I got the following information.
Call Trace:
    [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e
    [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e
    [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e
    [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e
    [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e
    [<ffffffff810622d5>] __register_sysctl_paths+0xde/0x272
    [<ffffffff8110892d>] ? __kmalloc_track_caller+0x16e/0x180
    [<ffffffffa00cfac3>] ? __addrconf_sysctl_register+0xc5/0x144 [ipv6]
    [<ffffffff8141f2c9>] register_net_sysctl_table+0x48/0x4b
    [<ffffffffa00cfaf5>] __addrconf_sysctl_register+0xf7/0x144 [ipv6]
    [<ffffffffa00cfc16>] addrconf_init_net+0xd4/0x104 [ipv6]
    [<ffffffff8139195f>] setup_net+0x35/0x82
    [<ffffffff81391f6c>] copy_net_ns+0x76/0xe0
    [<ffffffff8107ad60>] create_new_namespaces+0xf0/0x16e
    [<ffffffff8107afee>] copy_namespaces+0x65/0x9f
    [<ffffffff81056dff>] copy_process+0xb2c/0x12c3
    [<ffffffff810576e1>] do_fork+0x14b/0x2d2
    [<ffffffff8107ac4e>] ? up_read+0xe/0x10
    [<ffffffff81438e73>] ? do_page_fault+0x27a/0x2aa
    [<ffffffff8101044b>] sys_clone+0x28/0x2a
    [<ffffffff81011fb3>] stub_clone+0x13/0x20
    [<ffffffff81011c72>] ? system_call_fastpath+0x16/0x1b

And the information of IPV6 in .config is as following.
IPV6 in .config:
    CONFIG_IPV6=m
    CONFIG_IPV6_PRIVACY=y
    CONFIG_IPV6_ROUTER_PREF=y
    CONFIG_IPV6_ROUTE_INFO=y
    CONFIG_IPV6_OPTIMISTIC_DAD=y
    CONFIG_IPV6_MIP6=m
    CONFIG_IPV6_SIT=m
    # CONFIG_IPV6_SIT_6RD is not set
    CONFIG_IPV6_NDISC_NODETYPE=y
    CONFIG_IPV6_TUNNEL=m
    CONFIG_IPV6_MULTIPLE_TABLES=y
    CONFIG_IPV6_SUBTREES=y
    CONFIG_IPV6_MROUTE=y
    CONFIG_IPV6_PIMSM_V2=y
    # CONFIG_IP_VS_IPV6 is not set
    CONFIG_NF_CONNTRACK_IPV6=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=m

I confirmed this patch fixes this problem.
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The error unwinding code in set_netns has a bug
that will make it run into a BUG_ON if passed a
bad wiphy index, fix by not trying to unlock a
wiphy that doesn't exist.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>