1. 25 2月, 2016 1 次提交
  2. 23 2月, 2016 1 次提交
    • T
      ALSA: hda - Apply clock gate workaround to Skylake, too · 7e31a015
      Takashi Iwai 提交于
      Some Skylake machines show the codec probe errors in certain
      situations, e.g. HP Z240 desktop fails to probe the onboard Realtek
      codec at reloading the snd-hda-intel module like:
        snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000
        snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: lastcmd=0x000f0000
        snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
        snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...
        hdaudio hdaudioC0D2: no AFG or MFG node found
        snd_hda_intel 0000:00:1f.3: no codecs initialized
      
      Also, HP G470 G3 suffers from the similar problem, as reported in
      bugzilla below.  On this machine, the codec probe error appears even
      at a fresh boot.
      
      As Libin suggested, the same workaround used for Broxton in the commit
      [6639484d: ALSA: hda - disable dynamic clock gating on Broxton
       before reset] can be applied for Skylake in order to fix this problem.
      The Intel HW team also confirmed that this is needed for SKL.
      
      This patch makes the workaround applied to both SKL and BXT
      platforms.  The referred macros are moved and one superfluous macro
      (IS_BROXTON()) is another one (IS_BXT()) as well.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112731Suggested-by: NLibin Yang <libin.yang@linux.intel.com>
      Cc: <stable@vger.kernel.org> # v4.4+
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      7e31a015
  3. 18 2月, 2016 1 次提交
    • T
      ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream · 67ec1072
      Takashi Iwai 提交于
      A non-atomic PCM stream may take snd_pcm_link_rwsem rw semaphore twice
      in the same code path, e.g. one in snd_pcm_action_nonatomic() and
      another in snd_pcm_stream_lock().  Usually this is OK, but when a
      write lock is issued between these two read locks, the problem
      happens: the write lock is blocked due to the first reade lock, and
      the second read lock is also blocked by the write lock.  This
      eventually deadlocks.
      
      The reason is the way rwsem manages waiters; it's queued like FIFO, so
      even if the writer itself doesn't take the lock yet, it blocks all the
      waiters (including reads) queued after it.
      
      As a workaround, in this patch, we replace the standard down_write()
      with an spinning loop.  This is far from optimal, but it's good
      enough, as the spinning time is supposed to be relatively short for
      normal PCM operations, and the code paths requiring the write lock
      aren't called so often.
      Reported-by: NVinod Koul <vinod.koul@intel.com>
      Tested-by: NRamesh Babu <ramesh.babu@intel.com>
      Cc: <stable@vger.kernel.org> # v3.18+
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      67ec1072
  4. 16 2月, 2016 1 次提交
  5. 15 2月, 2016 2 次提交
    • T
      ALSA: hda - Cancel probe work instead of flush at remove · 0b8c8219
      Takashi Iwai 提交于
      The commit [991f86d7: ALSA: hda - Flush the pending probe work at
      remove] introduced the sync of async probe work at remove for fixing
      the race.  However, this may lead to another hangup when the module
      removal is performed quickly before starting the probe work, because
      it issues flush_work() and it's blocked forever.
      
      The workaround is to use cancel_work_sync() instead of flush_work()
      there.
      
      Fixes: 991f86d7 ('ALSA: hda - Flush the pending probe work at remove')
      Cc: <stable@vger.kernel.org> # v3.17+
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      0b8c8219
    • T
      ALSA: seq: Fix leak of pool buffer at concurrent writes · d99a36f4
      Takashi Iwai 提交于
      When multiple concurrent writes happen on the ALSA sequencer device
      right after the open, it may try to allocate vmalloc buffer for each
      write and leak some of them.  It's because the presence check and the
      assignment of the buffer is done outside the spinlock for the pool.
      
      The fix is to move the check and the assignment into the spinlock.
      
      (The current implementation is suboptimal, as there can be multiple
       unnecessary vmallocs because the allocation is done before the check
       in the spinlock.  But the pool size is already checked beforehand, so
       this isn't a big problem; that is, the only possible path is the
       multiple writes before any pool assignment, and practically seen, the
       current coverage should be "good enough".)
      
      The issue was triggered by syzkaller fuzzer.
      
      BugLink: http://lkml.kernel.org/r/CACT4Y+bSzazpXNvtAr=WXaL8hptqjHwqEyFA+VN2AWEx=aurkg@mail.gmail.comReported-by: NDmitry Vyukov <dvyukov@google.com>
      Tested-by: NDmitry Vyukov <dvyukov@google.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      d99a36f4
  6. 13 2月, 2016 1 次提交
  7. 12 2月, 2016 1 次提交
    • T
      Merge tag 'asoc-fix-v4.5-rc4' of... · 86c2ee16
      Takashi Iwai 提交于
      Merge tag 'asoc-fix-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
      
      ASoC: Fixes for v4.5
      
      A rather large batch of fixes here, almost all in the Intel driver.
      The changes that got merged in this merge window for Skylake were rather
      large and as well as issues that you'd expect in a large block of new
      code there were some problems created for older processors which needed
      fixing up.  Things are largely settling down now hopefully.
      86c2ee16
  8. 11 2月, 2016 9 次提交
  9. 10 2月, 2016 1 次提交
  10. 09 2月, 2016 5 次提交
  11. 08 2月, 2016 8 次提交
  12. 07 2月, 2016 3 次提交
    • T
      ALSA: hda - Fix speaker output from VAIO AiO machines · c44d9b11
      Takashi Iwai 提交于
      Some Sony VAIO AiO models (VGC-JS4EF and VGC-JS25G, both with PCI SSID
      104d:9044) need the same quirk to make the speaker working properly.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112031
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      c44d9b11
    • L
      Merge tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 46df55ce
      Linus Torvalds 提交于
      Pull USB fixes from Greg KH:
       "Here are some USB fixes for 4.5-rc3.
      
        The usual, xhci fixes for reported issues, combined with some small
        gadget driver fixes, and a MAINTAINERS file update.  All have been in
        linux-next with no reported issues"
      
      * tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        xhci: harden xhci_find_next_ext_cap against device removal
        xhci: Fix list corruption in urb dequeue at host removal
        usb: host: xhci-plat: fix NULL pointer in probe for device tree case
        usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling
        usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT
        usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
        usb: xhci: set SSIC port unused only if xhci_suspend succeeds
        usb: xhci: add a quirk bit for ssic port unused
        usb: xhci: handle both SSIC ports in PME stuck quirk
        usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.
        Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
        MAINTAINERS: fix my email address
        usb: dwc2: Fix probe problem on bcm2835
        Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
        usb: musb: ux500: Fix NULL pointer dereference at system PM
        usb: phy: mxs: declare variable with initialized value
        usb: phy: msm: fix error handling in probe.
      46df55ce
    • L
      Merge tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · dacd53c8
      Linus Torvalds 提交于
      Pull staging and IIO driver fixes from Greg KH:
       "Here are some IIO and staging driver fixes for 4.5-rc3.
      
        All of them, except one, are for IIO drivers, and one is for a speakup
        driver fix caused by some earlier patches, to resolve a reported build
        failure"
      
      * tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        Staging: speakup: Fix allyesconfig build on mn10300
        iio: dht11: Use boottime
        iio: ade7753: avoid uninitialized data
        iio: pressure: mpl115: fix temperature offset sign
        iio: imu: Fix dependencies for !HAS_IOMEM archs
        staging: iio: Fix dependencies for !HAS_IOMEM archs
        iio: adc: Fix dependencies for !HAS_IOMEM archs
        iio: inkern: fix a NULL dereference on error
        iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
        iio: light: acpi-als: Report data as processed
        iio: dac: mcp4725: set iio name property in sysfs
        iio: add HAS_IOMEM dependency to VF610_ADC
        iio: add IIO_TRIGGER dependency to STK8BA50
        iio: proximity: lidar: correct return value
        iio-light: Use a signed return type for ltr501_match_samp_freq()
      dacd53c8
  13. 06 2月, 2016 6 次提交
    • L
      Merge branch 'akpm' (patches from Andrew) · 5af9c2e1
      Linus Torvalds 提交于
      Merge fixes from Andrew Morton:
       "22 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
        epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
        radix-tree: fix oops after radix_tree_iter_retry
        MAINTAINERS: trim the file triggers for ABI/API
        dax: dirty inode only if required
        thp: make deferred_split_scan() work again
        mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
        ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
        um: asm/page.h: remove the pte_high member from struct pte_t
        mm, hugetlb: don't require CMA for runtime gigantic pages
        mm/hugetlb: fix gigantic page initialization/allocation
        mm: downgrade VM_BUG in isolate_lru_page() to warning
        mempolicy: do not try to queue pages from !vma_migratable()
        mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
        vmstat: make vmstat_update deferrable
        mm, vmstat: make quiet_vmstat lighter
        mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
        memblock: don't mark memblock_phys_mem_size() as __init
        dump_stack: avoid potential deadlocks
        mm: validate_mm browse_rb SMP race condition
        m32r: fix build failure due to SMP and MMU
        ...
      5af9c2e1
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · 5d6a6a75
      Linus Torvalds 提交于
      Pull Ceph fixes from Sage Weil:
       "We have a few wire protocol compatibility fixes, ports of a few recent
        CRUSH mapping changes, and a couple error path fixes"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        libceph: MOSDOpReply v7 encoding
        libceph: advertise support for TUNABLES5
        crush: decode and initialize chooseleaf_stable
        crush: add chooseleaf_stable tunable
        crush: ensure take bucket value is valid
        crush: ensure bucket id is valid before indexing buckets array
        ceph: fix snap context leak in error path
        ceph: checking for IS_ERR instead of NULL
      5d6a6a75
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 9b108828
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "Fixes all over the place:
      
         - amdkfd: two static checker fixes
         - mst: a bunch of static checker and spec/hw interaction fixes
         - amdgpu: fix Iceland hw properly, and some fiji bugs, along with
           some write-combining fixes.
         - exynos: some regression fixes
         - adv7511: fix some EDID reading issues"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits)
        drm/dp/mst: deallocate payload on port destruction
        drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
        drm/dp/mst: move GUID storage from mgr, port to only mst branch
        drm/dp/mst: change MST detection scheme
        drm/dp/mst: Calculate MST PBN with 31.32 fixed point
        drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
        drm/mst: Add range check for max_payloads during init
        drm/mst: Don't ignore the MST PBN self-test result
        drm: fix missing reference counting decrease
        drm/amdgpu: disable uvd and vce clockgating on Fiji
        drm/amdgpu: remove exp hardware support from iceland
        drm/amdgpu: load MEC ucode manually on iceland
        drm/amdgpu: don't load MEC2 on topaz
        drm/amdgpu: drop topaz support from gmc8 module
        drm/amdgpu: pull topaz gmc bits into gmc_v7
        drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
        drm/amdgpu: iceland use CI based MC IP
        drm/amdgpu: move gmc7 support out of CIK dependency
        drm/amdgpu/gfx7: enable cp inst/reg error interrupts
        drm/amdgpu/gfx8: enable cp inst/reg error interrupts
        ...
      9b108828
    • L
      Merge tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 22f60701
      Linus Torvalds 提交于
      Pull power management and ACPI fixes from Rafael Wysocki:
       "These are: a fix for a recently introduced false-positive warnings
        about PM domain pointers being changed inappropriately (harmless but
        annoying), an MCH size workaround quirk for one more platform, a
        compiler warning fix (generic power domains framework), an ACPI LPSS
        (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code.
      
        Specifics:
      
         - PM core fix to avoid false-positive warnings generated when the
           pm_domain field is cleared for a device that appears to be bound to
           a driver (Rafael Wysocki).
      
         - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer).
      
         - Fix for an "unused function" compiler warning in the generic power
           domains framework (Ulf Hansson).
      
         - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM
           domain pointer of a device properly in one place that was
           overlooked by a recent PM core update (Andy Shevchenko).
      
         - Removal of a redundant function declaration in the ACPI CPPC core
           code (Timur Tabi)"
      
      * tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        PM: Avoid false-positive warnings in dev_pm_domain_set()
        PM / Domains: Silence compiler warning for an unused function
        ACPI / CPPC: remove redundant mbox_send_message() declaration
        ACPI / LPSS: set PM domain via helper setter
        PNP: Add Haswell-ULT to Intel MCH size workaround
      22f60701
    • J
      epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT · b6a515c8
      Jason Baron 提交于
      In the current implementation of the EPOLLEXCLUSIVE flag (added for
      4.5-rc1), if epoll waiters create different POLL* sets and register them
      as exclusive against the same target fd, the current implementation will
      stop waking any further waiters once it finds the first idle waiter.
      This means that waiters could miss wakeups in certain cases.
      
      For example, when we wake up a pipe for reading we do:
      wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if
      one epoll set or epfd is added to pipe p with POLLIN and a second set
      epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the
      wakeup since the current implementation will stop after it finds any
      intersection of events with a waiter that is blocked in epoll_wait().
      
      We could potentially address this by requiring all epoll waiters that
      are added to p be required to pass the same set of POLL* events.  IE the
      first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL*
      flags to be used by any other epfds that are added as EPOLLEXCLUSIVE.
      However, I think it might be somewhat confusing interface as we would
      have to reference count the number of users for that set, and so
      userspace would have to keep track of that count, or we would need a
      more involved interface.  It also adds some shared state that we'd have
      store somewhere.  I don't think anybody will want to bloat
      __wait_queue_head for this.
      
      I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE
      such that it can only be specified with EPOLLIN and/or EPOLLOUT.  So
      that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop
      once we hit the first idle waiter that specifies the EPOLLIN bit, since
      any remaining waiters that only have 'POLLOUT' set wouldn't need to be
      woken.  Likewise, we can do the same thing if 'POLLOUT' is in the wakeup
      bit set and not 'POLLIN'.  If both 'POLLOUT' and 'POLLIN' are set in the
      wake bit set (there is at least one example of this I saw in fs/pipe.c),
      then we just wake the entire exclusive list.  Having both 'POLLOUT' and
      'POLLIN' both set should not be on any performance critical path, so I
      think that's ok (in fs/pipe.c its in pipe_release()).  We also continue
      to include EPOLLERR and EPOLLHUP by default in any exclusive set.  Thus,
      the user can specify EPOLLERR and/or EPOLLHUP but is not required to do
      so.
      
      Since epoll waiters may be interested in other events as well besides
      EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by
      doing a 'dup' call on the target fd and adding that as one normally
      would with EPOLL_CTL_ADD.  Since I think that the POLLIN and POLLOUT
      events are what we are interest in balancing, I think that the 'dup'
      thing could perhaps be added to only one of the waiter threads.
      However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be
      sufficient for the majority of use-cases.
      
      Since EPOLLEXCLUSIVE is intended to be used with a target fd shared
      among multiple epfds, where between 1 and n of the epfds may receive an
      event, it does not satisfy the semantics of EPOLLONESHOT where only 1
      epfd would get an event.  Thus, it is not allowed to be specified in
      conjunction with EPOLLEXCLUSIVE.
      
      EPOLL_CTL_MOD is also not allowed if the fd was previously added as
      EPOLLEXCLUSIVE.  It seems with the limited number of flags to not be as
      interesting, but this could be relaxed at some further point.
      Signed-off-by: NJason Baron <jbaron@akamai.com>
      Tested-by: NMadars Vitolins <m@silodev.com>
      Cc: Michael Kerrisk <mtk.manpages@gmail.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Al Viro <viro@ftp.linux.org.uk>
      Cc: Eric Wong <normalperson@yhbt.net>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Hagen Paul Pfeifer <hagen@jauu.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b6a515c8
    • K
      radix-tree: fix oops after radix_tree_iter_retry · 73204282
      Konstantin Khlebnikov 提交于
      Helper radix_tree_iter_retry() resets next_index to the current index.
      In following radix_tree_next_slot current chunk size becomes zero.  This
      isn't checked and it tries to dereference null pointer in slot.
      
      Tagged iterator is fine because retry happens only at slot 0 where tag
      bitmask in iter->tags is filled with single bit.
      
      Fixes: 46437f9a ("radix-tree: fix race in gang lookup")
      Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
      Cc: Matthew Wilcox <willy@linux.intel.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Ohad Ben-Cohen <ohad@wizery.com>
      Cc: Jeremiah Mahler <jmmahler@gmail.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      73204282