Signed-off-by: NJeff Layton <jlayton@redhat.com>

i_version is only supported by a filesystem when the SB_I_VERSION
flag is set. This patch tests for the SB_I_VERSION flag before using
i_version. If we can't use i_version to detect a file change then we
must assume the file has changed in the last_writer path and remeasure
it.

On filesystems without i_version support IMA used to measure a file
only once and didn't detect any changes to a file. With this patch
IMA now works properly on these filesystems.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>

Commit b65a9cfc ("Untangling ima mess, part 2: deal with counters")
moved the call of ima_file_check() from may_open() to do_filp_open() at a
point where the file descriptor is already opened.

This breaks the assumption made by IMA that file descriptors being closed
belong to files whose access was granted by ima_file_check(). The
consequence is that security.ima and security.evm are updated with good
values, regardless of the current appraisal status.

For example, if a file does not have security.ima, IMA will create it after
opening the file for writing, even if access is denied. Access to the file
will be allowed afterwards.

Avoid this issue by checking the appraisal status before updating
security.ima.

Cc: stable@vger.kernel.org
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

A non-zero value is converted to 1 when assigned to a bool variable, so the
conditional operator in is_ima_appraise_enabled is redundant.

The value of a comparison operator is either 1 or 0 so the conditional
operator in ima_inode_setxattr is redundant as well.

Confirmed that the patch is correct by comparing the object file from
before and after the patch. They are identical.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

When the user requests MODULE_CHECK policy and its kernel is compiled
with CONFIG_MODULE_SIG_FORCE not set, all modules would not load, just
those loaded in initram time. One option the user would have would be
set a kernel cmdline param (module.sig_enforce) to true, but the IMA
module check code doesn't rely on this value, it checks just
CONFIG_MODULE_SIG_FORCE.

This patch solves this problem checking for the exported value of
module.sig_enforce cmdline param intead of CONFIG_MODULE_SIG_FORCE,
which holds the effective value (CONFIG || param).
Signed-off-by: NBruno E. O. Meneguele <brdeoliv@redhat.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The hash_setup function always sets the hash_setup_done flag, even
when the hash algorithm is invalid.  This prevents the default hash
algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used.

This patch sets hash_setup_done flag only for valid hash algorithms.

Fixes: e7a2ad7e "ima: enable support for larger default filedata hash
	algorithms"
Signed-off-by: NBoshi Wang <wangboshi@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

A system can validate EVM digital signatures without requiring an HMAC
key, but every EVM validation will generate a kernel error. Change this
so we only generate an error once.
Signed-off-by: NMatthew Garrett <mjg59@google.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

EVM will only perform validation once a key has been loaded. This key
may either be a symmetric trusted key (for HMAC validation and creation)
or the public half of an asymmetric key (for digital signature
validation). The /sys/kernel/security/evm interface allows userland to
signal that a symmetric key has been loaded, but does not allow userland
to signal that an asymmetric public key has been loaded.

This patch extends the interface to permit userspace to pass a bitmask
of loaded key types. It also allows userspace to block loading of a
symmetric key in order to avoid a compromised system from being able to
load an additional key type later.
Signed-off-by: NMatthew Garrett <mjg59@google.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Apparmor will be gaining support for security.apparmor labels, and it
would be helpful to include these in EVM validation now so appropriate
signatures can be generated even before full support is merged.
Signed-off-by: NMatthew Garrett <mjg59@google.com>
Acked-by: NJohn Johansen <John.johansen@canonical.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The CONFIG_IMA_LOAD_X509 and CONFIG_EVM_LOAD_X509 options permit
loading x509 signed certificates onto the trusted keyrings without
verifying the x509 certificate file's signature.

This patch replaces the call to the integrity_read_file() specific
function with the common kernel_read_file_from_path() function.
To avoid verifying the file signature, this patch defines
READING_X509_CERTFICATE.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

All files matching a "measure" rule must be included in the IMA
measurement list, even when the file hash cannot be calculated.
Similarly, all files matching an "audit" rule must be audited, even when
the file hash can not be calculated.

The file data hash field contained in the IMA measurement list template
data will contain 0's instead of the actual file hash digest.

Note:
In general, adding, deleting or in anyway changing which files are
included in the IMA measurement list is not a good idea, as it might
result in not being able to unseal trusted keys sealed to a specific
TPM PCR value.  This patch not only adds file measurements that were
not previously measured, but specifies that the file hash value for
these files will be 0's.

As the IMA measurement list ordering is not consistent from one boot
to the next, it is unlikely that anyone is sealing keys based on the
IMA measurement list.  Remote attestation servers should be able to
process these new measurement records, but might complain about
these unknown records.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: NDmitry Kasatkin <dmitry.kasatkin@huawei.com>

The securityfs policy file is removed unless additional rules can be
appended to the IMA policy (CONFIG_IMA_WRITE_POLICY), regardless as
to whether the policy is configured so that it can be displayed.

This patch changes this behavior, removing the securityfs policy file,
only if CONFIG_IMA_READ_POLICY is also not enabled.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

ima starts several async crypto ops and  waits for their completions.
Move it over to generic code doing the same.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Acked-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If the file doesn't have an xattr, ima_appraise_measurement sets cause to
"missing-hash" while if there's an xattr but it's a digest instead of a
signature it sets cause to "IMA-signature-required".

Fix it by setting cause to "IMA-signature-required" in both cases.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

If the func_tokens array uses the same indices as enum ima_hooks,
policy_func_show can be a lot simpler, and the func_* enum becomes
unnecessary.

Also, if we use the same macro trick used by kernel_read_file_id_str we can
use one hooks list for both the enum and the string array, making sure they
are always in sync (suggested by Mimi Zohar).

Finally, by using the printf pattern for the function token directly
instead of using the pt macro we can simplify policy_func_show even further
and avoid needing a temporary buffer.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

These changes are too small to warrant their own patches:

The keyid and sig_size members of struct signature_v2_hdr are in BE format,
so use a type that makes this assumption explicit. Also, use beXX_to_cpu
instead of __beXX_to_cpu to read them.

Change integrity_kernel_read to take a void * buffer instead of char *
buffer, so that callers don't have to use a cast if they provide a buffer
that isn't a char *.

Add missing #endif comment in ima.h pointing out which macro it refers to.

Add missing fall through comment in ima_appraise.c.

Constify mask_tokens and func_tokens arrays.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Remove '+ 1' from 'size += strlen(entry->template_desc->name) + 1;',
as the template name is sent to userspace without the '\0' character.
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The binary_field_data structure definition has been removed from
ima_restore_template_data(). The lengths and data pointers are directly
stored into the template_data array of the ima_template_entry structure.
For template data, both the number of fields and buffer end checks can
be done, as these information are known (respectively from the template
descriptor, and from the measurement header field).
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The binary_hdr_v1 and binary_data_v1 structures defined in
ima_restore_measurement_list() have been replaced with an array of four
ima_field_data structures where pcr, digest, template name and
template data lengths and pointers are stored.

The length of pcr and digest in the ima_field_data array and the bits
in the bitmap are set before ima_parse_buf() is called. The ENFORCE_FIELDS
bit is set for all entries except the last one (there is still data to
parse), and ENFORCE_BUFEND is set only for the last entry.
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

ima_parse_buf() takes as input the buffer start and end pointers, and
stores the result in a static array of ima_field_data structures,
where the len field contains the length parsed from the buffer, and
the data field contains the address of the buffer just after the length.
Optionally, the function returns the current value of the buffer pointer
and the number of array elements written.

A bitmap has been added as parameter of ima_parse_buf() to handle
the cases where the length is not prepended to data. Each bit corresponds
to an element of the ima_field_data array. If a bit is set, the length
is not parsed from the buffer, but is read from the corresponding element
of the array (the length must be set before calling the function).

ima_parse_buf() can perform three checks upon request by callers,
depending on the enforce mask passed to it:

- ENFORCE_FIELDS: matching of number of fields (length-data combination)
  - there must be enough data in the buffer to parse the number of fields
    requested (output: current value of buffer pointer)
- ENFORCE_BUFEND: matching of buffer end
  - the ima_field_data array must be large enough to contain lengths and
    data pointers for the amount of data requested (output: number
    of fields written)
- ENFORCE_FIELDS | ENFORCE_BUFEND: matching of both

Use cases

- measurement entry header: ENFORCE_FIELDS | ENFORCE_BUFEND
  - four fields must be parsed: pcr, digest, template name, template data
  - ENFORCE_BUFEND is enforced only for the last measurement entry
- template digest (Crypto Agile): ENFORCE_BUFEND
  - since only the total template digest length is known, the function
    parses length-data combinations until the buffer end is reached
- template data: ENFORCE_FIELDS | ENFORCE_BUFEND
  - since the number of fields and the total template data length
    are known, the function can perform both checks
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

cgroups2 is beginning to show up in wider usage. Add it to the default
nomeasure/noappraise list like other filesystems.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Use memdup_user_nul() helper instead of open-coding to simplify the
code.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

While reading the code, I noticed that these #endif comments don't match
how they're actually nested. This patch fixes that.
Signed-off-by: NTycho Andersen <tycho@docker.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

IMA uses the hash algorithm too early to be able to use a module.
Require the selected hash algorithm to be built-in.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Only return enabled if in enforcing mode, not fix or log modes.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Changes:
- Define is_ima_appraise_enabled() as a bool (Thiago Bauermann)

Permit enabling the different "ima_appraise=" modes (eg. log, fix)
from the boot command line.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The builtin "ima_appraise_tcb" policy should require file signatures for
at least a few of the hooks (eg. kernel modules, firmware, and the kexec
kernel image), but changing it would break the existing userspace/kernel
ABI.

This patch defines a new builtin policy named "secure_boot", which
can be specified on the "ima_policy=" boot command line, independently
or in conjunction with the "ima_appraise_tcb" policy, by specifing
ima_policy="appraise_tcb | secure_boot".  The new appraisal rules
requiring file signatures will be added prior to the "ima_appraise_tcb"
rules.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Changelog:
- Reference secure boot in the new builtin policy name. (Thiago Bauermann)

Add support for providing multiple builtin policies on the "ima_policy="
boot command line.  Use "|" as the delimitor separating the policy names.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers.  More to come..
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Acked-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

This helper was only used by IMA of all things, which would get spurious
errors if CONFIG_BLOCK is disabled.  Just opencode the call there.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Acked-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

Replace struct key's restrict_link function pointer with a pointer to
the new struct key_restriction. The structure contains pointers to the
restriction function as well as relevant data for evaluating the
restriction.

The garbage collector checks restrict_link->keytype when key types are
unregistered. Restrictions involving a removed key type are converted
to use restrict_link_reject so that restrictions cannot be removed by
unregistering key types.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>

For now we have only "=" operator for fowner/uid/euid rules. This
patch provide two more operators - ">" and "<" in order to make
fowner/uid/euid rules more flexible.

Examples of usage.

 Appraise all files owned by special and system users (SYS_UID_MAX 999):
    appraise fowner<1000
 Don't appraise files owned by normal users (UID_MIN 1000):
    dont_appraise fowner>999
 Appraise all files owned by users with UID 1000-1010:
    dont_appraise fowner>1010
    appraise fowner>999

Changelog v3:
- Removed code duplication in ima_parse_rule().
- Fix ima_policy_show() - (Mimi)

Changelog v2:
- Fixed default policy rules.
Signed-off-by: NMikhail Kurinnoi <viewizard@viewizard.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

 security/integrity/ima/ima_policy.c | 115 +++++++++++++++++++++++++++---------
 1 file changed, 87 insertions(+), 28 deletions(-)

Modifying the attributes of a file makes ima_inode_post_setattr reset
the IMA cache flags. So if the file, which has just been created,
is opened a second time before the first file descriptor is closed,
verification fails since the security.ima xattr has not been written
yet. We therefore have to look at the IMA_NEW_FILE even if the file
already existed.

With this patch there should no longer be an error when cat tries to
open testfile:

$ rm -f testfile
$ ( echo test >&3 ; touch testfile ; cat testfile ) 3>testfile

A file being new is no reason to accept that it is missing a digital
signature demanded by the policy.
Signed-off-by: NDaniel Glöckner <dg@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The default IMA rules are loaded during init and then do not
change, so mark them as __ro_after_init.
Signed-off-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Update files that depend on the magic.h inclusion.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Otherwise some mask and inmask tokens with MAY_APPEND flag may not work
as expected.
Signed-off-by: NLans Zhang <jia.zhang@windriver.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>