Move the srp_map_desc() call from inside srp_map_sg_entry() to
srp_map_sg() such that the use_mr argument can be removed from
srp_map_sg_entry().
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Mapping a discontiguous sg-list requires multiple memory regions
and hence can exhaust the memory region pool. The SRP initiator
already handles this by temporarily reducing the queue depth. This
means that it is safe to remove the memory registration backtracking
code. This patch has been tested with direct I/O sizes up to 256 MB.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Although most paths through which a request is submitted check
block layer parameters like the max_segments limit, these are
not checked when an SG_IO or direct I/O request is submitted.
Hence add a range check for the memory descriptor array pointer.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Instead of using the global rkey for large memory regions, use
multiple registrations. See also the while (dma_len) loop further
down in srp_map_sg_entry().
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

During a discussion in 2011 nobody recalled why FMR was not used for
non-page aligned buffers (see also
http://thread.gmane.org/gmane.linux.drivers.rdma/7149). Re-enable FMR
for such buffers. For the reason why the srp_map_fmr() function needs
to be modified, see also patch "IB/srp: rework mapping engine to use
multiple FMR entries" (commit ID 8f26c9ff; January 2011).
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: NDominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace all leys with  pd->local_dma_lkey. This driver does not support
iWarp, so this is safe.

The insecure use of ib_get_dma_mr is thus isolated to an rkey, and will
have to be fixed separately.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace all leys with  pd->local_dma_lkey. This driver does not support
iWarp, so this is safe.

The insecure use of ib_get_dma_mr is thus isolated to an rkey, and this
looks trivially fixed by forcing the use of registration in a future
patch.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Every single ULP requires a local_dma_lkey to do anything with
a QP, so let us ensure one exists for every PD created.

If the driver can supply a global local_dma_lkey then use that, otherwise
ask the driver to create a local use all physical memory MR associated
with the new PD.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSagi Grimberg <sagig@dev.mellanox.co.il>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Tested-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Chaning of send work requests benefits performance by
reducing the send queue lock contention (acquired in
ib_post_send) and saves us HW doorbells which is posted
only once.

Currently, in normal IO flows iser does not chain the CDB send
work request with the registration work request. Also in PI
flows, signature work requests are not chained as well.

Lets chain those and post only once.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Easier to debug when we have the registration details.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

iser support up to 512KB data transfer in a single scsi command.
This means that larger IOs will split to different request. While
iser can easily saturate FDR/EDR wires, some arrays are fine tuned
for 1MB (or larger) IO sizes, hence add an option to support larger
transfers (up to 8MB) if the device allows it.

Given that a few target implementations don't support data transfers
of more than 512KB by default and the fact that larger IO sizes require
more resources, we introduce a module parameter to determine the
maximum number of 512B sectors in a single scsi command.
Users that are interested in larger transfers can change this value given
that the target supports larger transfers.

At the moment, iser works in 4K pages granularity, In a later stage
we will get it to work with system page size instead.

IO operations that consists of N pages will need a page vector
of size N+1 in case the first SG element contains an offset. Given
that some devices allocates memory regions in powers of 2, this
means that allocating a region with N+1 pages, will result in
region resources allocation of the next power of 2. Since we don't
want that to happen, in case we are in the limit of IO size supported
and the first SG element has an offset, we align the SG list using a
bounce buffer (which is OK given that this is not likely to happen a lot).
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Hard coded for now. This will allow to allocate different
sized MRs depending on the IO size needed (and device
capabilities).

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

iser_reg_rdma_mem_[fastreg|fmr] share a lot of code, and
logically do the same thing other than the buffer registration
method itself (iser_fast_reg_mr vs. iser_fast_reg_fmr).
The DIF logic is not implemented in the FMR flow as there is no
existing device that supports FMRs and Signature feature.

This patch unifies the flow in a single routine iser_reg_rdma_mem
and just split to fmr/frwr for the buffer registration itself.

Also, for symmetry reasons, unify iser_unreg_rdma_mem (which will
call the relevant device specific unreg routine).
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As for fmrs we will hold a single registration descriptor
as no need for multiple like in the frwr mode (descriptor
for each task). This change helps unifying the duplicate
registration code paths.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Also, change a name of a local variable.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This will allow us to unify the memory registration code path between
the various methods which vary by the device capabilities. This change
will make it easier and less intrusive to remove fmr_pools from the
code when we'd want to.

The reason we use a single descriptor is to avoid taking a
redundant spinlock when working with FMRs.

We also change the signature of iser_reg_page_vec to make it match
iser_fast_reg_mr (and the future indirect registration method).
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Instead of having it a part of the connection structure,
have it be under a dedicated (embedded) structure in the
connection. A logical separation of the registration pool
and the connection structure.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Don't have the caller allocate the structure and worry about
freeing it in case the routine failed.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move all the per-device function pointers to an easy
extensible iser_reg_ops structure that contains all
the iser registration operations.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the past the we always tried to allocate an fmr_pool
and if it failed on ENOSYS (not supported) then we continued
with dma mr. This is not the case anymore and if we tried to
allocate an fmr_pool then it is supported and we expect to succeed.

Also, the check if fmr_pool is allocated when free is called is
redundant as well as we are guaranteed it exists.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid struct names without iser_ prefix.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Have fast_reg_descriptor hold struct iser_reg_resources
(mr, frpl, valid flag). This will be useful when the
actual buffer registration routines will be passed with
the needed registration resources (i.e. iser_reg_resources)
without being aware of their nature (i.e. data or protection).

In order to achieve this, we remove reg_indicators flags container
and place specific flags (mr_valid) within iser_reg_resources struct.
We also place the sig_mr_valid and sig_protcted flags in iser_pi_context.

This patch also modifies iser_fast_reg_mr to receive the
reg_resources instead of the fast_reg_descriptor and a data/protection
indicator.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAdir Lev <adirl@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We can do it in iser_aligned_data_len instead and
it will save us an argument that is passed to
fall_to_counce_buf just for the print.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We always call iser_initialize_task_headers() and set
the header tx_sg.lkey to the device mr lkey, so no
point in checking it in iser_create_send_desc().
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If iser_initialize_task_headers() routine failed before
dma mapping, we should not attempt to unmap in cleanup_task().

Fixes: 7414dde0 (IB/iser: Fix race between iser connection ...)
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We don't update those anywhere in the code and they
seem pretty useless (no one seem to care about those).

qp_tx_queue_full: We never should get this
fmr_map_not_avail: We can never get to this
eh_abort_cnt: We don't monitor aborts

Go ahead and remove them.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since commit "IB/iser: Fix race between iser connection teardown..."
iser_initialize_task_headers() might fail, so we need to check that.

Fixes: 7414dde0 (IB/iser: Fix race between iser connection ...)
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

While we're at it, use permission defines instead
of octal values and rearrange a little bit.
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch routes a SA pathrecord query to netlink first and processes the
response appropriately. If a failure is returned, the request will be sent
through IB. The decision whether to route the request to netlink first is
determined by the presence of a listener for the local service netlink
multicast group. If the user-space local service netlink multicast group
listener is not present, the request will be sent through IB, just like
what is currently being done.
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NJohn Fleck <john.fleck@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace kmalloc with kzalloc so that all uninitialized fields in SA query
will be zero-ed out to avoid unintentional consequence. This prepares the
SA query structure to accept new fields in the future.
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NJohn Fleck <john.fleck@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>