- 06 2月, 2017 13 次提交
-
-
由 Marc Kleine-Budde 提交于
Some CAN controllers don't implement a FIFO in hardware, but fill their mailboxes in a particular order (from lowest to highest or highest to lowest). This makes problems to read the frames in the correct order from the hardware, as new frames might be filled into just read (low) mailboxes. This gets worse, when following new frames are received into not read (higher) mailboxes. On the bright side some these CAN controllers put a timestamp on each received CAN frame. This patch adds support to offload CAN frames in interrupt context, order them by timestamp and then transmitted in a NAPI context. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 David Jander 提交于
Some CAN controllers have a usable FIFO already but can still benefit from off-loading the CAN controller FIFO. The CAN frames of the FIFO are read and put into a skb queue during interrupt and then transmitted in a NAPI context. Signed-off-by: NDavid Jander <david@protonic.nl> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Eric Dumazet 提交于
We plan to remove __napi_complete() soon, this driver is the last user. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() We plan to remove __napi_complete() to reduce NAPI complexity. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. Note that rx_lock seems to be useless, NAPI logic should not need this extra care. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API and get rid of napi_gro_flush() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) get rid of baroque code and ease maintenance. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) get rid of baroque code and ease maintenance. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) get rid of baroque code and ease maintenance. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) Eventually get rid of napi_gro_flush() in the future. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
Since commit 364b6055 ("net: busy-poll: return busypolling status to drivers"), napi_complete_done() returns a boolean that can be used by drivers to conditionally rearm interrupts. This patch changes virtio_net to use this boolean to avoid a bit of overhead for busy-poll users. Jason reports about 1.1% improvement for 1 byte TCP_RR (burst 100). Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NJason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2017 26 次提交
-
-
由 David S. Miller 提交于
We do polling generically these days. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of code, we also remove one lock operation in fast path, and allow GRO to do its job. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of code, we also remove one lock operation in fast path, and allow GRO to do its job. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Extend the existing setup_tc ndo call and allow to offload cls_flower rules. Only limited set of dissector keys and actions are supported now. Use previously introduced ACL infrastructure to offload cls_flower rules to be processed in the HW. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Add ACL core infrastructure for Spectrum ASIC. This infra provides an abstraction layer over specific HW implementations. There are two basic objects used. One is "rule" and the second is "ruleset" which serves as a container of multiple rules. In general, within one ruleset the rules are allowed to have multiple priorities and masks. Each ruleset is bound to either ingress or egress a of port netdevice. The initial TCAM implementation is very simple and limited. It utilizes parman lsort manager to take care of TCAM region layout. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Add couple of resource limits related to ACL. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Introduce basic set of Spectrum flexible key blocks. It contains blocks needed to carry all elements defined so far. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Each entry which is matched during ACL lookup points to an action set. This action set contains up to three separate actions. If more actions are needed to be chained, the extended set is created to hold them in KVD linear area. This patch implements handling of sets and encoding of actions. Currectly, only two actions are supported. Drop and forward. Forward action uses PBS pointer to KVD linear area, so the action code needs to take care of this as well. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Hardware supports matching on so called "flexible keys". The idea is to assemble an optimal key to use for matching according to the fields in packet (elements) requested by user. Certain sets of elements are combined into pre-defined blocks. There is a picker to find needed blocks. Keys consist of 1..n blocks. Alongside with that, an initial portion of elements is introduced in order to be able to offload basic cls_flower rules. Picked keys are cached so multiple rules could share them. There is an encode function provided that takes care of encoding key and mask values according to given key. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
PEFA register is used for accessing an extended flexible action entry in the central KVD Linear Database. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The PPBS register retrieves and sets Policy Based Switching Table entries. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The PRCR register is used for accessing rules within a TCAM region. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The PPBT is used for configuration of the Port Binding Table. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The PTCE-V2 register is used for accessing rules within a TCAM region. It is a new version of PTCE in order to support wider key, mask and action within a TCAM region. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The PTAR register is used for allocation of regions in the TCAM. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The PAGT register is used for configuration of the ACL Group Table. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The PACL register is used for configuration of the ACL. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Sometimes it is handy to get a pointer to a char buffer item and use it direcly to write/read data. So add these helpers. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Item heplers for 8bit values are needed, let's add them. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhu Yanjun 提交于
The function bond_info_query alwarys returns 0. As such, in the function bond_do_ioctl, it is not necessary to check the returned value. So the interface type of the function bond_info_query is changed to void. The redundant check is removed. Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot of code, we also remove one spin_lock() from driver fast path. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Compared to custom busy_poll, the generic NAPI one is simpler and removes a lot of code. It removes one atomic in the fast path (when busy poll is not in action) since we do not have to use an extra spinlock. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Compared to custom busy_poll, the generic NAPI one is better, since it allows to use GRO, and it removes a lot of code and extra locked operations in fast path. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
Vxlan COLLECT_METADATA mode today solves the per-vni netdev scalability problem in l3 networks. It expects all forwarding information to be present in dst_metadata. This patch series enhances collect metadata mode to include the case where only vni is present in dst_metadata, and the vxlan driver can then use the rest of the forwarding information datbase to make forwarding decisions. There is no change to default COLLECT_METADATA behaviour. These changes only apply to COLLECT_METADATA when used with the bridging use-case with a special dst_metadata tunnel info flag (eg: where vxlan device is part of a bridge). For all this to work, the vxlan driver will need to now support a single fdb table hashed by mac + vni. This series essentially makes this happen. use-case and workflow: vxlan collect metadata device participates in bridging vlan to vn-segments. Bridge driver above the vxlan device, sends the vni corresponding to the vlan in the dst_metadata. vxlan driver will lookup forwarding database with (mac + vni) for the required remote destination information to forward the packet. Changes introduced by this patch: - allow learning and forwarding database state in vxlan netdev in COLLECT_METADATA mode. Current behaviour is not changed by default. tunnel info flag IP_TUNNEL_INFO_BRIDGE is used to support the new bridge friendly mode. - A single fdb table hashed by (mac, vni) to allow fdb entries with multiple vnis in the same fdb table - rx path already has the vni - tx path expects a vni in the packet with dst_metadata - prior to this series, fdb remote_dsts carried remote vni and the vxlan device carrying the fdb table represented the source vni. With the vxlan device now representing multiple vnis, this patch adds a src vni attribute to the fdb entry. The remote vni already uses NDA_VNI attribute. This patch introduces NDA_SRC_VNI netlink attribute to represent the src vni in a multi vni fdb table. iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's. before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metadata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
On large SMP builds, we can run into a build warning: drivers/net/ethernet/hisilicon/hns/hns_enet.c: In function 'hns_set_irq_affinity.isra.27': drivers/net/ethernet/hisilicon/hns/hns_enet.c:1242:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] The solution here is to use cpumask_var_t, which can use dynamic allocation when CONFIG_CPUMASK_OFFSTACK is enabled. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Generic NAPI busy polling allows us to remove custom implementations found in drivers. It is possible further optimization could be done by testing napi_complete_done() return value. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-