- 05 8月, 2010 14 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This function will be used to locate a free area to put the new memblock arrays when attempting to resize them. memblock_alloc_region() is gone, the two callsites now call memblock_add_region(). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> --- v2. Fix membase_alloc_nid_region() conversion
-
由 Benjamin Herrenschmidt 提交于
Since we allocate one more than needed, why not do a bit of sanity checking here to ensure we don't walk past the end of the array ? Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This is in preparation for having resizable arrays. Note that we still allocate one more than needed, this is unchanged from the previous implementation. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Right now, both the "memory" and "reserved" memblock_type structures have a "size" member. It represents the calculated memory size in the former case and is unused in the latter. This moves it out to the main memblock structure instead Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Let's not waste space and cycles on archs that don't support >32-bit physical address space. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The RMA (RMO is a misnomer) is a concept specific to ppc64 (in fact server ppc64 though I hijack it on embedded ppc64 for similar purposes) and represents the area of memory that can be accessed in real mode (aka with MMU off), or on embedded, from the exception vectors (which is bolted in the TLB) which pretty much boils down to the same thing. We take that out of the generic MEMBLOCK data structure and move it into arch/powerpc where it belongs, renaming it to "RMA" while at it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This introduce memblock.current_limit which is used to limit allocations from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE). The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still be used with memblock_alloc_base() to allocate really anywhere. It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears. Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I strongly recommend that you ensure that you set an appropriate limit during boot in order to guarantee that an memblock_alloc() at any time results in something that is accessible with a simple __va(). The reason is that a subsequent patch will introduce the ability for the array to resize itself by reallocating itself. The MEMBLOCK core will honor the current limit when performing those allocations. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Nobody uses it anymore. It's semantics were ... weird Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 04 8月, 2010 19 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
CC: David S. Miller <davem@davemloft.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
CC: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
CC: Michal Simek <monstr@monstr.eu> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Walk memblock's using for_each_memblock() and use memblock_region_base/end_pfn() for getting to PFNs. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Instead of the deprecated memblock_find() Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The implementation is pretty much similar. There is a -small- added overhead by having another function call and the address shift. If that becomes a concern, I suppose we could actually have memblock itself expose a memblock_pfn_valid() which then ARM can use directly with an appropriate #define... Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
To make it fast, we steal ARM's binary search for memblock_is_memory() and we use that to also the replace existing implementation of memblock_is_reserved(). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
All callers expect a boolean result which is true if the region overlaps a reserved region. However, the implementation actually returns -1 if there is no overlap, and a region index (0 based) if there is. Make it behave as callers (and common sense) expect. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: GFS2: Fix recovery stuck bug (try #2) GFS2: Fix typo in stuffed file data copy handling Revert "GFS2: recovery stuck on transaction lock" GFS2: Make "try" lock not try quite so hard GFS2: remove dependency on __GFP_NOFAIL GFS2: Simplify gfs2_write_alloc_required GFS2: Wait for journal id on mount if not specified on mount command line GFS2: Use nobh_writepage
-
git://git.infradead.org/ubi-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: do not warn unnecessarily UBI: do not print message about corruptes PEBs if we have none of them UBI: improve delete-compatible volumes handling UBI: fix error message and compilation warnings UBI: generate random image_seq when formatting MTD devices UBI: improve ECC error message UBI: improve corrupted flash handling UBI: introduce eraseblock counter variables UBI: introduce a new IO return code UBI: simplify IO error codes
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix a memory leak on error path. UBIFS: fix GC LEB recovery UBIFS: use ERR_CAST UBIFS: check return code
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (22 commits) 9p: fix sparse warnings in new xattr code fs/9p: remove sparse warning in vfs_inode fs/9p: destroy fid on failed remove fs/9p: Prevent parallel rename when doing fid_lookup fs/9p: Add support user. xattr net/9p: Implement TXATTRCREATE 9p call net/9p: Implement attrwalk 9p call 9p: Implement LOPEN fs/9p: This patch implements TLCREATE for 9p2000.L protocol. 9p: Implement TMKDIR 9p: Implement TMKNOD 9p: Define and implement TSYMLINK for 9P2000.L 9p: Define and implement TLINK for 9P2000.L 9p: Define and implement TLINK for 9P2000.L 9p: Implement client side of setattr for 9P2000.L protocol. 9p: getattr client implementation for 9P2000.L protocol. fs/9p: Pass the correct user credentials during attach net/9p: Handle the server returned error properly 9p: readdir implementation for 9p2000.L 9p: Make use of iounit for read/write ...
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits) xfs simplify and speed up direct I/O completions xfs: move aio completion after unwritten extent conversion direct-io: move aio_complete into ->end_io xfs: fix big endian build xfs: clean up xfs_bmap_get_bp xfs: simplify xfs_truncate_file xfs: kill the b_strat callback in xfs_buf xfs: remove obsolete osyncisosync mount option xfs: clean up filestreams helpers xfs: fix gcc 4.6 set but not read and unused statement warnings xfs: Fix build when CONFIG_XFS_POSIX_ACL=n xfs: fix unsigned underflow in xfs_free_eofblocks xfs: use GFP_NOFS for page cache allocation xfs: fix memory reclaim recursion deadlock on locked inode buffer xfs: fix xfs_trans_add_item() lockdep warnings xfs: simplify and remove xfs_ireclaim xfs: don't block on buffer read errors xfs: move inode shrinker unregister even earlier xfs: remove a dmapi leftover xfs: writepage always has buffers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (29 commits) cifs: fsc should not default to "on" [CIFS] remove redundant path walking in dfs_do_refmount cifs: ignore the "mand", "nomand" and "_netdev" mount options cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS cifs: don't allow cifs_iget to match inodes of the wrong type [CIFS] relinquish fscache cookie before freeing CIFSTconInfo cifs: add separate cred_uid field to sesInfo fs: cifs: check kmalloc() result [CIFS] Missing ifdef [CIFS] Missing line from previous commit [CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled cifs: add mount option to enable local caching cifs: read pages from FS-Cache cifs: store pages into local cache cifs: FS-Cache page management cifs: define inode-level cache object and register them cifs: define superblock-level cache index objects and register them cifs: remove unused cifsUidInfo struct cifs: clean up cifs_find_smb_ses (try #2) cifs: match secType when searching for existing tcp session ...
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
-
由 Helge Deller 提交于
avoid potential stack overflow by correctly checking count parameter Reported-by: NIlja <ilja@netric.org> Signed-off-by: NHelge Deller <deller@gmx.de> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 8月, 2010 7 次提交
-
-
由 Matthieu CASTET 提交于
In 'mount_ubifs()', in case of 'ubifs_leb_unmap()' falure, free allocated resources. Signed-off-by: NMatthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Eric Van Hensbergen 提交于
fixes: CHECK fs/9p/xattr.c fs/9p/xattr.c:73:6: warning: Using plain integer as NULL pointer fs/9p/xattr.c:135:6: warning: Using plain integer as NULL pointer Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
make v9fs_dentry_from_dir_inode static Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
9P spec says: "It is correct to consider remove to be a clunk with the side effect of removing the file if permissions allow. " So even if remove fails we need to destroy the fid. Without this patch an rmdir on a directory with contents leave the new cloned directory fid fid attached to fidlist. On umount we dump the fids on the fidlist ~# rmdir /mnt2/test4/ rmdir: failed to remove `/mnt2/test4/': Directory not empty ~# umount /mnt2/ ~# dmesg [ 228.474323] Found fid 3 not clunked Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
During fid lookup we need to make sure that the dentry->d_parent doesn't change so that we can safely walk the parent dentries. To ensure that we need to prevent cross directory rename during fid_lookup. Add a per superblock rename_sem rw_semaphore to prevent parallel fid lookup and rename. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
TXATTRCREATE: Prepare a fid for setting xattr value on a file system object. size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4] size[4] RXATTRCREATE tag[2] txattrcreate gets a fid pointing to xattr. This fid can later be used to set the xattr value. flag value is derived from set Linux setxattr. The manpage says "The flags parameter can be used to refine the semantics of the operation. XATTR_CREATE specifies a pure create, which fails if the named attribute exists already. XATTR_REPLACE specifies a pure replace operation, which fails if the named attribute does not already exist. By default (no flags), the extended attribute will be created if need be, or will simply replace the value if the attribute exists." The actual setxattr operation happens when the fid is clunked. At that point the written byte count and the attr_size specified in TXATTRCREATE should be same otherwise an error will be returned. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-