- 01 2月, 2008 40 次提交
-
-
由 Julia Lawall 提交于
Continue is not needed at the bottom of a loop. The semantic patch implementing this change is as follows: @@ @@ for (...;...;...) { ... if (...) { ... - continue; } } Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Added the missing model string for the new support of HP TC T5735. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Kailang Yang 提交于
Added the support of HP Thin Client T5735 [0x103c 0x302f] with ALC262 codec. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jiang Zhe 提交于
When a mic jack is set up as the multiple I/O, it may issue the automute function wrongly. This patch fixes the wrong automute detection. Signed-off-by: NJiang Zhe <zhe.jiang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jiang Zhe 提交于
Dell laptops have multiple HP jacks that can be used for multi-channel outputs. The current auto pincfg handles the speaker as the primary output and thus cannot handle the multi-channel configuration for such cases. This patch adds a workaround to fix this issue by swapping the HP and speaker during multi-channel setup routines. Signed-off-by: NJiang Zhe <zhe.jiang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jiang Zhe 提交于
Updated dell-m82 model pin config table. The old config doesn't work with Dell 1210 and co. Signed-off-by: NJiang Zhe <zhe.jiang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Nicolas Kaiser 提交于
Remove duplicated defines. (From their use it looks like 'midiDataOutx are written to rather than read from.) Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jiri Olsa 提交于
remove dead config symbols from sound code Signed-off-by: NJiri Olsa <olsajiri@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Stanislav Brabec 提交于
On Zaurus SL-C3200 (terrier/spitz) based on WM8750, treble scale is inconveniently reverted (increase level = decrease treble), in opposite to bass scale, which uses convenient scale. Fix ALSA WM8750 mixer treble to use convenient treble scale (increase = increase treble level) From: Stanislav Brabec <utx@penguin.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Nicolas Kaiser 提交于
Remove line duplications in defines. Acked-by: NThomas Sailer <sailer@ife.ee.ethz.ch> Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Matthew Ranostay 提交于
Added more laptops subsystem id's that have STAC9228 DMIC support. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Timofei Bondarenko 提交于
Enable capturing of raw 32bit IEC958_SUBFRAME. The 24-bits PCM data can be obtained using iec958 plugin. Known problem: captured stream may begin with either left or right subframe. Since the iec958 plugin doesn't decode preamble it may swap the channels sometime. Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Timofei Bondarenko 提交于
Setting the ADC48K44K greatly improves capture quality at 48k sampling rate. With this bit clear ADC does ZOH interpolation of every 22th sample at 48k. At frequencies higher than 48k there ADC performs a little better with ADC48K44K bit set. At 44.1k ADC performs a little better with this bit clear. At frequencies below 44.1k there is no difference. Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Added new PCI SSIDs for HP machines with ALC262 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Matthew Ranostay 提交于
Added analog loopback support and missing ADC capture mixer for the STAC92HD71 codec family. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Manuel Lauss 提交于
Change loops in ac97_read/write functions to count down to zero rather than up. Gcc will then use the 'dt' (decrement-and-test) op instead of an increment/compare op-pair. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Matthew Ranostay 提交于
Added initial support for the STAC92HD71BXX family of codecs. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
The Audio interface on HD2400/HD2600 cards isn't currently detected by snd-hda-intel. I added missing pci device ids for RV610 and RV630, but I only had a HD2400 pro card to test, where now the audio interface is detected (and no need to change patch_atihdmi.c, as the codec vendor id remains 0x1002aa01 for which we already have an entry there). I also couldn't test if sound pass-trough is ok (and I don't know how to), but at least now the device is detected. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Joachim Foerster 提交于
We have to do fairly accurate counting of the minimal periods, instead of being lazy and just setting the number to zero as soon as one period elapses. Signed-off-by: NJoachim Foerster <JOFT@gmx.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Joachim Foerster 提交于
Add ALSA support for the opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403 reference design. Known issue: Currently this driver hits a WARN_ON_ONCE(1) statement in kernel/irq/resend.c (line 70). According to Linus (http://lkml.org/lkml/2007/8/5/5) this may be ignored, right? I haven't had a look into this 'problem' yet. Signed-off-by: NJoachim Foerster <JOFT@gmx.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Matthew Ranostay 提交于
Added support for the dmics and enabled EAPD for several laptops with STAC9228 cards. Signed-off-by: NMatthew Ranostay <mranostay@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Tobin Davis 提交于
Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Timofei Bondarenko 提交于
This patch adds support for 88.2k, 96k, and 128k samplerates on cmi8738-55 chip. Analog playback works fine on all channels. Analog capture works well too, though the extra samples seems interpolated by hardware. spdif playback and capture works fine. Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Some small improvements on autocfg stuff: - sort HP pins by sequence number, too - move sole mic pin to AUTO_PIN_MIC instead of AUTO_PIN_FRONT_MIC - ditto for line-in pin Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Timofei Bondarenko 提交于
This patch improves support for 'SB Live 24-bit Extarnal' USB card. 1) This card can go into muted state when a headphones connected or disconnected. So notify mixer about changes in headphone jack. 2) Add LED controls and procfs support just as in similar Audigy 2 NX card. 3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality: the card may adjust microphone input level only. Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
I applied a wrong patch for 'opl3 - simplify exclusive access lock'. Fixed now. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Remove sequencer instrument layer from the tree. This mechanism hasn't been used much with the actual devices. The only reasonable user was OPL3 loader, and now it was rewritten to use hwdep instead. So, let's remove the rest of rotten codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Use the exclusive access lock in hwdep instead of the own one. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Use the hwdep device for loading OPL2/3 patch data instead of the messy sequencer instrument layer. Due to this change, the sbiload program should be updated, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
This patch supresses an annoying compiler warning that the variable err may be used uninitialised. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Krzysztof Helt 提交于
This patch kills these two compilation warnings if power management is disabled: sound/pci/ac97/ac97_patch.h:86: warning: 'snd_ac97_restore_status' declared 'static' but never defined sound/pci/ac97/ac97_patch.h:87: warning: 'snd_ac97_restore_iec958' declared 'static' but never defined Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Introduced the global 'slots' option to snd module. This option provides an alternative way to handle the order of multiple sound card instances. It's an easier approach to avoid conflict with hotplug devices, and can be used together with the existing 'order' option of each card driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Show the current EAPD status and volume-knob status in proc file. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Ivan Kuten 提交于
This patch adds ac97 support for ln2440sbc board from LittleChips. This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec. Existing s3c2443 implementation is slightly modified because s3c2440 and s3c2443 have different AC97 interrupts. Signed-off-by: NIvan Kuten <ivan.kuten@promwad.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Tobin Davis 提交于
This patch adds full record and playback support for the Samsung Q1 Ultra - Vista model (different codec than the earlier Q1 Ultra models). Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Fix quirk for Shuttle AK32VN. It works better with DXS_SRC, and needs HP_ONLY ac97 quirk. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Fixed the print format for debug message. Spotted by Matthew Wilcox. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Shin-ya Okada 提交于
Added the support for Onkyo SE-90PCI and SE-200PCI boards. Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mike Rapoport 提交于
The following patch adds 'Mono Playback Switch' control to WM9712 codec SoC driver. Also, it fixes Treble, Bass and Mono playback volume inversion bits. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-