Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 01 2月, 2017 1 次提交
  3. 18 10月, 2016 1 次提交
  5. 09 9月, 2016 3 次提交
    • A
      efi/arm64: Treat regions with WT/WC set but WB cleared as memory · cb82cce7
      由 Ard Biesheuvel 提交于 
      Currently, memory regions are only recorded in the memblock memory table
if they have the EFI_MEMORY_WB memory type attribute set. In case the
region is of a reserved type, it is also marked as MEMBLOCK_NOMAP, which
will leave it out of the linear mapping.

However, memory regions may legally have the EFI_MEMORY_WT or EFI_MEMORY_WC
attributes set, and the EFI_MEMORY_WB cleared, in which case the region in
question is obviously backed by normal memory, but is not recorded in the
memblock memory table at all. Since it would be useful to be able to
identify any UEFI reported memory region using memblock_is_memory(), it
makes sense to add all memory to the memblock memory table, and simply mark
it as MEMBLOCK_NOMAP if it lacks the EFI_MEMORY_WB attribute.

While implementing this, let's refactor the code slightly to make it easier
to understand: replace is_normal_ram() with is_memory(), and make it return
true for each region that has any of the WB|WT|WC bits set. (This follows
the AArch64 bindings in the UEFI spec, which state that those are the
attributes that map to normal memory)

Also, replace is_reserve_region() with is_usable_memory(), and only invoke
it if the region in question was identified as memory by is_memory() in the
first place. The net result is the same (only reserved regions that are
backed by memory end up in the memblock memory table with the MEMBLOCK_NOMAP
flag set) but carried out in a more straightforward way.

Finally, we remove the trailing asterisk in the EFI debug output. Keeping it
clutters the code, and it serves no real purpose now that we no longer
temporarily reserve BootServices code and data regions like we did in the
early days of EFI support on arm64 Linux (which it inherited from the x86
implementation)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NLeif Lindholm <leif.lindholm@linaro.org>
Tested-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      cb82cce7
    • A
      efi/arm*: esrt: Add missing call to efi_esrt_init() · 2ead3084
      由 Ard Biesheuvel 提交于 
      ESRT support is built by default for all architectures that define
CONFIG_EFI. However, this support was not wired up yet for ARM/arm64,
since efi_esrt_init() was never called. So add the missing call.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      2ead3084
    • M
      efi: Refactor efi_memmap_init_early() into arch-neutral code · 9479c7ce
      由 Matt Fleming 提交于 
      Every EFI architecture apart from ia64 needs to setup the EFI memory
map at efi.memmap, and the code for doing that is essentially the same
across all implementations. Therefore, it makes sense to factor this
out into the common code under drivers/firmware/efi/.

The only slight variation is the data structure out of which we pull
the initial memory map information, such as physical address, memory
descriptor size and version, etc. We can address this by passing a
generic data structure (struct efi_memory_map_data) as the argument to
efi_memmap_init_early() which contains the minimum info required for
initialising the memory map.

In the process, this patch also fixes a few undesirable implementation
differences:

 - ARM and arm64 were failing to clear the EFI_MEMMAP bit when
   unmapping the early EFI memory map. EFI_MEMMAP indicates whether
   the EFI memory map is mapped (not the regions contained within) and
   can be traversed.  It's more correct to set the bit as soon as we
   memremap() the passed in EFI memmap.

 - Rename efi_unmmap_memmap() to efi_memmap_unmap() to adhere to the
   regular naming scheme.

This patch also uses a read-write mapping for the memory map instead
of the read-only mapping currently used on ARM and arm64. x86 needs
the ability to update the memory map in-place when assigning virtual
addresses to regions (efi_map_region()) and tagging regions when
reserving boot services (efi_reserve_boot_services()).

There's no way for the generic fake_mem code to know which mapping to
use without introducing some arch-specific constant/hook, so just use
read-write since read-only is of dubious value for the EFI memory map.

Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump]
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm]
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      9479c7ce
  7. 03 6月, 2016 1 次提交
    • D
      efi/arm: Fix the format of EFI debug messages · c7534397
      由 Dennis Chen 提交于 
      When both EFI and memblock debugging is enabled on the kernel command line:

  'efi=debug memblock=debug'

.. the debug messages for early_con look the following way:

 [    0.000000] efi:   0x0000e1050000-0x0000e105ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e1300000-0x0000e1300fff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e8200000-0x0000e827ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x008000000000-0x008001e7ffff [Runtime Data       |RUN|  |  |  |  |  |  |   |WB|WT|WC|UC]
 [    0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
 [    0.000000] *
 ...

Note the misplaced '*' line, which happened because the memblock debug message
was printed while the EFI debug message was still being constructed..

This patch fixes the output to be the expected:

 [    0.000000] efi:   0x0000e1050000-0x0000e105ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e1300000-0x0000e1300fff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x0000e8200000-0x0000e827ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
 [    0.000000] efi:   0x008000000000-0x008001e7ffff [Runtime Data       |RUN|  |  |  |  |  |  |   |WB|WT|WC|UC]*
 [    0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
 ...

Note how the '*' is now in the proper EFI debug message line.
Signed-off-by: NDennis Chen <dennis.chen@arm.com>
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Steve McIntyre <steve@einval.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1464690224-4503-3-git-send-email-matt@codeblueprint.co.uk
[ Made the changelog more readable. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      c7534397
  9. 28 4月, 2016 8 次提交
  11. 19 4月, 2016 1 次提交
    • A
      efi: ARM: avoid warning about phys_addr_t cast · 7464b6e3
      由 Arnd Bergmann 提交于 
      memblock_remove() takes a phys_addr_t, which may be narrower than 64 bits,
causing a harmless warning:

drivers/firmware/efi/arm-init.c: In function 'reserve_regions':
include/linux/kernel.h:29:20: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
 #define ULLONG_MAX (~0ULL)
                    ^
drivers/firmware/efi/arm-init.c:152:21: note: in expansion of macro 'ULLONG_MAX'
  memblock_remove(0, ULLONG_MAX);

This adds an explicit typecast to avoid the warning

Fixes: 500899c2 ("efi: ARM/arm64: ignore DT memory nodes instead of removing them")
Acked-by Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      7464b6e3
  13. 16 4月, 2016 1 次提交
  15. 01 4月, 2016 1 次提交
    • A
      efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping · 7cc8cbcf
      由 Ard Biesheuvel 提交于 
      Commit 4dffbfc4 ("arm64/efi: mark UEFI reserved regions as
MEMBLOCK_NOMAP") updated the mapping logic of both the RuntimeServices
regions as well as the kernel's copy of the UEFI memory map to set the
MEMBLOCK_NOMAP flag, which causes these regions to be omitted from the
kernel direct mapping, and from being covered by a struct page.
For the RuntimeServices regions, this is an obvious win, since the contents
of these regions have significance to the firmware executable code itself,
and are mapped in the EFI page tables using attributes that are described in
the UEFI memory map, and which may differ from the attributes we use for
mapping system RAM. It also prevents the contents from being modified
inadvertently, since the EFI page tables are only live during runtime
service invocations.

None of these concerns apply to the allocation that covers the UEFI memory
map, since it is entirely owned by the kernel. Setting the MEMBLOCK_NOMAP on
the region did allow us to use ioremap_cache() to map it both on arm64 and
on ARM, since the latter does not allow ioremap_cache() to be used on
regions that are covered by a struct page.

The ioremap_cache() on ARM restriction will be lifted in the v4.7 timeframe,
but in the mean time, it has been reported that commit 4dffbfc4 causes
a regression on 64k granule kernels. This is due to the fact that, given
the 64 KB page size, the region that we end up removing from the kernel
direct mapping is rounded up to 64 KB, and this 64 KB page frame may be
shared with the initrd when booting via GRUB (which does not align its
EFI_LOADER_DATA allocations to 64 KB like the stub does). This will crash
the kernel as soon as it tries to access the initrd.

Since the issue is specific to arm64, revert back to memblock_reserve()'ing
the UEFI memory map when running on arm64. This is a temporary fix for v4.5
and v4.6, and will be superseded in the v4.7 timeframe when we will be able
to move back to memblock_reserve() unconditionally.

Fixes: 4dffbfc4 ("arm64/efi: mark UEFI reserved regions as MEMBLOCK_NOMAP")
Reported-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Mark Langsdorf <mlangsdo@redhat.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      7cc8cbcf
  17. 22 2月, 2016 1 次提交
  19. 10 12月, 2015 3 次提交
  21. 27 11月, 2015 2 次提交
  23. 25 11月, 2015 1 次提交
    • M
      arm64: efi: correctly map runtime regions · 3b12acf4
      由 Mark Rutland 提交于 
      The kernel may use a page granularity of 4K, 16K, or 64K depending on
configuration.

When mapping EFI runtime regions, we use memrange_efi_to_native to round
the physical base address of a region down to a kernel page boundary,
and round the size up to a kernel page boundary, adding the residue left
over from rounding down the physical base address. We do not round down
the virtual base address.

In __create_mapping we account for the offset of the virtual base from a
granule boundary, adding the residue to the size before rounding the
base down to said granule boundary.

Thus we account for the residue twice, and when the residue is non-zero
will cause __create_mapping to map an additional page at the end of the
region. Depending on the memory map, this page may be in a region we are
not intended/permitted to map, or may clash with a different region that
we wish to map. In typical cases, mapping the next item in the memory
map will overwrite the erroneously created entry, as we sort the memory
map in the stub.

As __create_mapping can cope with base addresses which are not page
aligned, we can instead rely on it to map the region appropriately, and
simplify efi_virtmap_init by removing the unnecessary code.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      3b12acf4
  25. 18 11月, 2015 1 次提交
  27. 28 10月, 2015 1 次提交
    • A
      efi: Use correct type for struct efi_memory_map::phys_map · 44511fb9
      由 Ard Biesheuvel 提交于 
      We have been getting away with using a void* for the physical
address of the UEFI memory map, since, even on 32-bit platforms
with 64-bit physical addresses, no truncation takes place if the
memory map has been allocated by the firmware (which only uses
1:1 virtually addressable memory), which is usually the case.

However, commit:

  0f96a99d ("efi: Add "efi_fake_mem" boot option")

adds code that clones and modifies the UEFI memory map, and the
clone may live above 4 GB on 32-bit platforms.

This means our use of void* for struct efi_memory_map::phys_map has
graduated from 'incorrect but working' to 'incorrect and
broken', and we need to fix it.

So redefine struct efi_memory_map::phys_map as phys_addr_t, and
get rid of a bunch of casts that are now unneeded.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: izumi.taku@jp.fujitsu.com
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: linux-efi@vger.kernel.org
Cc: matt.fleming@intel.com
Link: http://lkml.kernel.org/r/1445593697-1342-1-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      44511fb9
  29. 12 10月, 2015 2 次提交
  31. 07 10月, 2015 2 次提交
  33. 01 10月, 2015 1 次提交
    • A
      arm64/efi: Fix boot crash by not padding between EFI_MEMORY_RUNTIME regions · 0ce3cc00
      由 Ard Biesheuvel 提交于 
      The new Properties Table feature introduced in UEFIv2.5 may
split memory regions that cover PE/COFF memory images into
separate code and data regions. Since these regions only differ
in the type (runtime code vs runtime data) and the permission
bits, but not in the memory type attributes (UC/WC/WT/WB), the
spec does not require them to be aligned to 64 KB.

Since the relative offset of PE/COFF .text and .data segments
cannot be changed on the fly, this means that we can no longer
pad out those regions to be mappable using 64 KB pages.
Unfortunately, there is no annotation in the UEFI memory map
that identifies data regions that were split off from a code
region, so we must apply this logic to all adjacent runtime
regions whose attributes only differ in the permission bits.

So instead of rounding each memory region to 64 KB alignment at
both ends, only round down regions that are not directly
preceded by another runtime region with the same type
attributes. Since the UEFI spec does not mandate that the memory
map be sorted, this means we also need to sort it first.

Note that this change will result in all EFI_MEMORY_RUNTIME
regions whose start addresses are not aligned to the OS page
size to be mapped with executable permissions (i.e., on kernels
compiled with 64 KB pages). However, since these mappings are
only active during the time that UEFI Runtime Services are being
invoked, the window for abuse is rather small.
Tested-by: NMark Salter <msalter@redhat.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [UEFI 2.4 only]
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Reviewed-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443218539-7610-3-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      0ce3cc00
  35. 28 7月, 2015 1 次提交
  37. 28 5月, 2015 1 次提交
    • D
      e820, efi: add ACPI 6.0 persistent memory types · ad5fb870
      由 Dan Williams 提交于 
      ACPI 6.0 formalizes e820-type-7 and efi-type-14 as persistent memory.
Mark it "reserved" and allow it to be claimed by a persistent memory
device driver.

This definition is in addition to the Linux kernel's existing type-12
definition that was recently added in support of shipping platforms with
NVDIMM support that predate ACPI 6.0 (which now classifies type-12 as
OEM reserved).

Note, /proc/iomem can be consulted for differentiating legacy
"Persistent Memory (legacy)" E820_PRAM vs standard "Persistent Memory"
E820_PMEM.

Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      ad5fb870
  39. 21 3月, 2015 1 次提交
    • W
      arm64: efi: don't restore TTBR0 if active_mm points at init_mm · 130c93fd
      由 Will Deacon 提交于 
      init_mm isn't a normal mm: it has swapper_pg_dir as its pgd (which
contains kernel mappings) and is used as the active_mm for the idle
thread.

When restoring the pgd after an EFI call, we write current->active_mm
into TTBR0. If the current task is actually the idle thread (e.g. when
initialising the EFI RTC before entering userspace), then the TLB can
erroneously populate itself with junk global entries as a result of
speculative table walks.

When we do eventually return to userspace, the task can end up hitting
these junk mappings leading to lockups, corruption or crashes.

This patch fixes the problem in the same way as the CPU suspend code by
ensuring that we never switch to the init_mm in efi_set_pgd and instead
point TTBR0 at the zero page. A check is also added to cpu_switch_mm to
BUG if we get passed swapper_pg_dir.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: f3cdfd23 ("arm64/efi: move SetVirtualAddressMap() to UEFI stub")
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      130c93fd
  41. 14 3月, 2015 1 次提交
  43. 22 1月, 2015 1 次提交
  45. 17 1月, 2015 1 次提交
  47. 13 1月, 2015 3 次提交