All users of function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST have
been removed. We can safely remove them from the kernel.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

function_trace_stop is no longer used to stop function tracing.
Remove the check from __ftrace_ops_list_func().

Also, call FTRACE_WARN_ON() instead of setting function_trace_stop
if a ops has no func to call.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When function tracing is being updated function_trace_stop is set to
keep from tracing the updates. This was fine when function tracing
was done from stop machine. But it is no longer done that way and
this can cause real tracing to be missed.

Remove it.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing.

A new function is created called ftrace_graph_is_dead(). This is called
in strategic paths to prevent function graph from doing more harm and
allowing at least a warning to be printed before the system crashes.

NOTE: ftrace_stop() is still used until all the archs are converted over
to use ftrace_graph_is_dead(). After that, ftrace_stop() will be removed.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently if an arch supports function graph tracing, the core code will
just assign the function graph trampoline to the function graph addr that
gets called.

But as the old method for function graph tracing always calls the function
trampoline first and that calls the function graph trampoline, some
archs may have the function graph trampoline dependent on operations that
were done in the function trampoline. This causes function graph tracer
to break on those archs.

Instead of having the default be to set the function graph ftrace_ops
to the function graph trampoline, have it instead just set it to zero
which will keep it from jumping to a trampoline that is not set up
to be jumped directly too.

Link: http://lkml.kernel.org/r/53BED155.9040607@nvidia.comReported-by: NTuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: NTuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When there's no entry in set_ftrace_notrace, it'll print nothing, but
it's better to print something like below like set_graph_notrace does:

  #### no functions disabled ####

Link: http://lkml.kernel.org/p/1402644246-4649-1-git-send-email-namhyung@kernel.orgReported-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When there's no entry in set_graph_notrace, it'll print below message

  #### all functions enabled ####

While this is technically correct, it's better to print like below:

  #### no functions disabled ####

Link: http://lkml.kernel.org/p/1402590233-22321-3-git-send-email-namhyung@kernel.orgReported-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ftrace_graph_notrace option is for specifying notrace filter for
function graph tracer at boot time.  It can be altered after boot
using set_graph_notrace file on the debugfs.

Link: http://lkml.kernel.org/p/1402590233-22321-2-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a filter file is open for writing and O_TRUNC is set, there's no
need to copy and free the filter entries.

Link: http://lkml.kernel.org/p/1402474014-28655-2-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As struct ftrace_page is managed in a single linked list, it should
free from the start page.

Link: http://lkml.kernel.org/p/1402474014-28655-1-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It seems like it's a leftover from commit 4104d326 ("ftrace:
Remove global function list and call function directly").  As it
isn't updated at all, checking its value is meaningless.

Let's get rid of it.

Link: http://lkml.kernel.org/p/1402584972-17824-1-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Simplify ftrace_hash_disable/enable path in ftrace_hash_move
for hardening the process if the memory allocation failed.

Link: http://lkml.kernel.org/p/20140617110442.15167.81076.stgit@kbuild-fedora.novalocalSigned-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The enabled_functions is used to help debug the dynamic function tracing.
Adding what trampolines are attached to files is useful for debugging.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Function graph tracing is a bit different than the function tracers, as
it is processed after either the ftrace_caller or ftrace_regs_caller
and we only have one place to modify the jump to ftrace_graph_caller,
the jump needs to happen after the restore of registeres.

The function graph tracer is dependent on the function tracer, where
even if the function graph tracing is going on by itself, the save and
restore of registers is still done for function tracing regardless of
if function tracing is happening, before it calls the function graph
code.

If there's no function tracing happening, it is possible to just call
the function graph tracer directly, and avoid the wasted effort to save
and restore regs for function tracing.

This requires adding new flags to the dyn_ftrace records:

  FTRACE_FL_TRAMP
  FTRACE_FL_TRAMP_EN

The first is set if the count for the record is one, and the ftrace_ops
associated to that record has its own trampoline. That way the mcount code
can call that trampoline directly.

In the future, trampolines can be added to arbitrary ftrace_ops, where you
can have two or more ftrace_ops registered to ftrace (like kprobes and perf)
and if they are not tracing the same functions, then instead of doing a
loop to check all registered ftrace_ops against their hashes, just call the
ftrace_ops trampoline directly, which would call the registered ftrace_ops
function directly.

Without this patch perf showed:

  0.05%  hackbench  [kernel.kallsyms]  [k] ftrace_caller
  0.05%  hackbench  [kernel.kallsyms]  [k] arch_local_irq_save
  0.05%  hackbench  [kernel.kallsyms]  [k] native_sched_clock
  0.04%  hackbench  [kernel.kallsyms]  [k] __buffer_unlock_commit
  0.04%  hackbench  [kernel.kallsyms]  [k] preempt_trace
  0.04%  hackbench  [kernel.kallsyms]  [k] prepare_ftrace_return
  0.04%  hackbench  [kernel.kallsyms]  [k] __this_cpu_preempt_check
  0.04%  hackbench  [kernel.kallsyms]  [k] ftrace_graph_caller

See that the ftrace_caller took up more time than the ftrace_graph_caller
did.

With this patch:

  0.05%  hackbench  [kernel.kallsyms]  [k] __buffer_unlock_commit
  0.04%  hackbench  [kernel.kallsyms]  [k] call_filter_check_discard
  0.04%  hackbench  [kernel.kallsyms]  [k] ftrace_graph_caller
  0.04%  hackbench  [kernel.kallsyms]  [k] sched_clock

The ftrace_caller is no where to be found and ftrace_graph_caller still
takes up the same percentage.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ftrace dynamic record has a flags element that also has a counter.
Instead of hard coding "rec->flags & ~FTRACE_FL_MASK" all over the
place. Use a macro instead.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When registering a function callback for the function tracer, the ops
can specify if it wants to save full regs (like an interrupt would)
for each function that it traces, or if it does not care about regs
and just wants to have the fastest return possible.

Once a ops has registered a function, if other ops register that
function they all will receive the regs too. That's because it does
the work once, it does it for everyone.

Now if the ops wanting regs unregisters the function so that there's
only ops left that do not care about regs, those ops will still
continue getting regs and going through the work for it on that
function. This is because the disabling of the rec counter only
sees the ops registered, and does not see the ops that are still
attached, and does not know if the current ops that are still attached
want regs or not. To play it safe, it just keeps regs being processed
until no function is registered anymore.

Instead of doing that, check the ops that are still registered for that
function and if none want regs for it anymore, then disable the
processing of regs.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As the decision to what needs to be done (converting a call to the
ftrace_caller to ftrace_caller_regs or to convert from ftrace_caller_regs
to ftrace_caller) can easily be determined from the rec->flags of
FTRACE_FL_REGS and FTRACE_FL_REGS_EN, there's no need to have the
ftrace_check_record() return either a UPDATE_MODIFY_CALL_REGS or a
UPDATE_MODIFY_CALL. Just he latter is enough. This added flag causes
more complexity than is required. Remove it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With the moving of the functions that determine what the mcount call site
should be replaced with into the generic code, there is a few places
in the generic code that can use them instead of hard coding it as it
does.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move and rename get_ftrace_addr() and get_ftrace_addr_old() to
ftrace_get_addr_new() and ftrace_get_addr_curr() respectively.

This moves these two helper functions in the generic code out from
the arch specific code, and renames them to have a better generic
name. This will allow other archs to use them as well as makes it
a bit easier to work on getting separate trampolines for different
functions.

ftrace_get_addr_new() returns the trampoline address that the mcount
call address will be converted to.

ftrace_get_addr_curr() returns the trampoline address of what the
mcount call address currently jumps to.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ftrace_hash_empty() function is a simple test:

	return !hash || !hash->count;

But gcc seems to want to make it a call. As this is in an extreme
hot path of the function tracer, there's no reason it needs to be
a call. I only wrote it to be a helper function anyway, otherwise
it would have been inlined manually.

Force gcc to inline it, as it could have also been a macro.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Back in 2011 Commit ed926f9b "ftrace: Use counters to enable
functions to trace" changed the way ftrace accounts for enabled
and disabled traced functions. There was a comment started as:

	/*
	 *
	 */

But never finished. Well, that's rather useless. I probably forgot
to save the file before committing it. And it passed review from all
this time.

Anyway, better late than never. I updated the comment to express what
is happening in that somewhat complex code.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 4104d326 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler, but it left a variable "hash_enable" that was used
to know if the hash functions should be updated or not. It was
updated if the global_ops did not override them. As the global_ops
are now no different than any other ftrace_ops, the hash always
gets updated and there's no reason to use the hash_enable boolean.

The same goes for hash_disable used in ftrace_shutdown().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Replace uses of &__get_cpu_var for address calculation with this_cpu_ptr.

Link: http://lkml.kernel.org/p/alpine.DEB.2.10.1404291415560.18364@gentwo.orgAcked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 4104d326 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler. But it left out function graph filtering which
also depended on that code. The function graph filtering still
needs to use global_ops as the filter otherwise it wont filter
at all.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

A race exists between module loading and enabling of function tracer.

	CPU 1				CPU 2
	-----				-----
  load_module()
   module->state = MODULE_STATE_COMING

				register_ftrace_function()
				 mutex_lock(&ftrace_lock);
				 ftrace_startup()
				  update_ftrace_function();
				   ftrace_arch_code_modify_prepare()
				    set_all_module_text_rw();
				   <enables-ftrace>
				    ftrace_arch_code_modify_post_process()
				     set_all_module_text_ro();

				[ here all module text is set to RO,
				  including the module that is
				  loading!! ]

   blocking_notifier_call_chain(MODULE_STATE_COMING);
    ftrace_init_module()

     [ tries to modify code, but it's RO, and fails!
       ftrace_bug() is called]

When this race happens, ftrace_bug() will produces a nasty warning and
all of the function tracing features will be disabled until reboot.

The simple solution is to treate module load the same way the core
kernel is treated at boot. To hardcode the ftrace function modification
of converting calls to mcount into nops. This is done in init/main.c
there's no reason it could not be done in load_module(). This gives
a better control of the changes and doesn't tie the state of the
module to its notifiers as much. Ftrace is special, it needs to be
treated as such.

The reason this would work, is that the ftrace_module_init() would be
called while the module is in MODULE_STATE_UNFORMED, which is ignored
by the set_all_module_text_ro() call.

Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.comReported-by: NTakao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
still have their old names in the kernel doc (ftrace_set_filter and
ftrace_set_notrace respectively). Replace these with the real names.

Link: http://lkml.kernel.org/p/1398006644-5935-3-git-send-email-wangjiaxing@insigma.com.cnSigned-off-by: NJiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When using ftrace_ops_list_func, we should skip 4 instead of 3,
to avoid ftrace_call+0x5/0xb appearing in the stack trace:

        Depth    Size   Location    (110 entries)
        -----    ----   --------
  0)     2956       0   update_curr+0xe/0x1e0
  1)     2956      68   ftrace_call+0x5/0xb
  2)     2888      92   enqueue_entity+0x53/0xe80
  3)     2796      80   enqueue_task_fair+0x47/0x7e0
  4)     2716      28   enqueue_task+0x45/0x70
  5)     2688      12   activate_task+0x22/0x30

Add a function using_ftrace_ops_list_func() to test for this while keeping
ftrace_ops_list_func to remain static.

Link: http://lkml.kernel.org/p/1398006644-5935-2-git-send-email-wangjiaxing@insigma.com.cnSigned-off-by: NJiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Instead of initializing the pm notifier block in register_ftrace_graph(),
initialize it statically. This safes us some code.

Found in the PaX patch, written by the PaX Team.

Link: http://lkml.kernel.org/p/1396186310-3156-1-git-send-email-minipli@googlemail.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Instead of having a list of global functions that are called,
as only one global function is allow to be enabled at a time, there's
no reason to have a list.

Instead, simply have all the users of the global ops, use the global ops
directly, instead of registering their own ftrace_ops. Just switch what
function is used before enabling the function tracer.

This removes a lot of code as well as the complexity involved with it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Link: http://lkml.kernel.org/r/1357772960-4436-5-git-send-email-sasha.levin@oracle.comSigned-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With CONFIG_DYNAMIC_FTRACE=n, I see a warning:
kernel/trace/ftrace.c:240:13: warning: 'control_ops_free' defined but not used
 static void control_ops_free(struct ftrace_ops *ops)
             ^
Move that function around to an already existing #ifdef
CONFIG_DYNAMIC_FTRACE block as the function is used solely from the
dynamic function tracing functions.

Link: http://lkml.kernel.org/r/1394484131-5107-1-git-send-email-jslaby@suse.czSigned-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

We should print some warning and kill ftrace functionality when the ftrace
function is not set correctly. Otherwise, ftrace might do crazy things without
an explanation. The error value has been ignored so far.

Note that an error that happens during updating all the traced calls is handled
in ftrace_replace_code(). We print more details about the particular
failing address via ftrace_bug() there.

Link: http://lkml.kernel.org/r/1393258342-29978-3-git-send-email-pmladek@suse.czSigned-off-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.

Note the documentation was imprecise as it did not suggest to set
(*data) to 0.

Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.

Note there is also "return 0" in every ftrace_dyn_arch_init.  So it is
enough to check the retval and remove all the indirect sets of data on
all archs.

Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz

Cc: linux-arch@vger.kernel.org
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The function used to do allocations some time ago. This no longer
happens and it only checks the count and prints some info. This patch
inlines the body to the only caller. There are two reasons:
* the name of the function was misleading
* it's clear what is going on in ftrace_init now

Link: http://lkml.kernel.org/r/1393268401-24379-2-git-send-email-jslaby@suse.czSigned-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Some of them can be local to functions, so make them local and pass
them as parameters where needed:
* __start_mcount_loc+__stop_mcount_loc are local to ftrace_init
* ftrace_new_pgs -> new_pgs/start_pg
* ftrace_update_cnt -> local update_cnt in ftrace_update_code

Link: http://lkml.kernel.org/r/1393268401-24379-1-git-send-email-jslaby@suse.czSigned-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ENABLED flag needs to be cleared when a ftrace_ops is unregistered
otherwise it wont be able to be registered again.

This is only for static tracing and does not affect DYNAMIC_FTRACE at
all.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Create a "set_ftrace_filter" and "set_ftrace_notrace" files in the instance
directories to let users filter of functions to trace for the given instance.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation for having the function tracing instances be able to
filter on functions, the generic filter functions must first be
converted to take in the global_ops as a parameter.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If global_ops function is being called directly, instead of the global_ops
list function, set the global_ops private to be the same as the ops private
that's being called directly.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>