Merge tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next

ZTE DRM driver updates for 4.11:
 - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
   driver uses drm_display_mode_to_videomode().
 - Enable HDMI audio support through SPDIF interface based on generic
   hdmi-audio-codec driver.
 - Enable VOU VL (Video Layer) to support overlay plane with scaling
   function.
 - Refine zx_vou driver a bit and then add TV Encoder output device
   support.

[airlied: fixup plane format change]

* tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  drm: zte: add tvenc driver support
  dt: add bindings for ZTE tvenc device
  drm: zte: add function to configure vou_ctrl dividers
  drm: zte: move struct vou_inf into zx_vou driver
  drm: zte: add interlace mode support
  drm: zte: add overlay plane support
  drm: zte: add .atomic_disable hook to disable graphic layer
  drm: zte: make zx_plane accessible from zx_vou driver
  drm: zte: support hdmi audio through spdif
  drm: zte: select VIDEOMODE_HELPERS in Kconfig

Updated pull request after I pulled first time :)

* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view

Hope I'm not too late before the cutoff for the v4.11 with these patches.
Mostly an asorted set of fixes that we have discovered while playing with
the code and preparing for the next set of features.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: fix stride setting for multi-plane formats
  drm: mali-dp: Add plane offset to the plane's physical start address register
  drm: mali-dp: Check for sufficient address space
  drm: mali-dp: Check hw version matches device-tree
  drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
  drm: mali-dp: fix Lx_CONTROL register fields clobber
  drm: mali-dp: Fix transposed horizontal/vertical flip
  drm: mali-dp: Fix destination size handling when rotating
  drm: mali-dp: Don't force source size == crtc size
  drm: mali-dp: Check more use cases in the plane's ->atomic_check()
  drm: malidp: Remove event_list member from struct malidp_drm
  drm/arm/malidp: Fix possible dereference of NULL

It adds the TV Encoder driver to support video output in PAL and NTSC
format.  The driver uses syscon/regmap interface to configure register
bit sitting in SYSCTRL module for DAC power control.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>

It adds bindings doc for ZTE VOU TV Encoder device.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>

The clock control module (CRM) cannot always provide desired frequency
for all VOU output devices.  That's why VOU integrates a few dividers
to further divide the clocks from CRM.  Let's add an interface for
configuring these dividers.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>

Although data in struct vou_inf is defined per output device, it doesn't
belong to the device itself but VOU control module.  All these data can
just be defined in VOU driver, and output device driver only needs to
invoke VOU driver function with device ID to enable/disable specific
output device.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>

It adds interlace mode support in VOU TIMING_CTRL and channel control
block, so that VOU driver gets ready to support output device in
interlace mode like TV Encoder.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>

It enables VOU VL (Video Layer) to support overlay plane with scaling
function.  VL0 has some quirks on scaling support.  We choose to skip it
and only adds VL1 and VL2 into DRM core for now.

Function zx_plane_atomic_disable() gets moved around with no changes to
save a forward declaration.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>

There are a few hardware bits for each graphic layer to control main/aux
channel and clock selection, as well as the layer enabling.  These bits
sit outside the layer block itself, but in VOU control glue block.  We
currently set these bits up at CRTC initialization for once, and do not
support disabling the layer.

This patch creates a pair of functions zx_vou_layer_enable[disable] to
be invoked from plane hooks .atomic_update and .atomic_disable to set up
and tear down the layer.  This is generic for both graphic and video
layers, so it will make the overlay plane support to be added later much
easier.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>

Move struct zx_plane from zx_plane.c to zx_plane.h, so that it can be
accessed from zx_vou driver, and we can save the use of struct
zx_layer_data completely.  More importantly, those additional data used
by VOU controller to enable/disable graphic and video layers can later
be added and accessed much more easily from zx_vou driver.

While at it, we make two changes to zx_plane_init() interface:

 - Encode struct device pointer in zx_plane, so that we do not need to
   pass it as a parameter.
 - Change return of zx_plane_init() from struct drm_plane pointer to
   error code, since we can get the pointer from zx_plane in zx_vou
   driver now.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>

It enables HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver.  The HDMI hardware supports more audio
interfaces than SPDIF, like I2S, which may be added later.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

ZTE DRM driver uses drm_display_mode_to_videomode() in function
zx_crtc_enable().  Select VIDEOMODE_HELPERS in Kconfig to fix the
following link error.

  LD      vmlinux.o
  MODPOST vmlinux.o
drivers/built-in.o: In function `zx_crtc_enable':
:(.text+0xbdeb8): undefined reference to `drm_display_mode_to_videomode'
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

drivers/gpu/drm/sti/sti_plane.c:76:33: error: ‘struct drm_framebuffer’
has no member named ‘pixel_format’; did you mean ‘format’?

I didn't look to hard at the casting to a char * and just did a
mechanical transformation of s/pixel_format/format->format/ as given in
commit 438b74a5 ("drm: Nuke fb->pixel_format").

Fixes: 438b74a5 ("drm: Nuke fb->pixel_format")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff

* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
  drm: qxl: Open code teardown function for qxl
  drm: qxl: Open code probing sequence for qxl
  drm/bridge: adv7511: Re-write the i2c address before EDID probing
  drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
  drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
  drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
  drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
  drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
  drm: vc4: use crtc helper drm_crtc_from_index()
  drm: tegra: use crtc helper drm_crtc_from_index()
  drm: nouveau: use crtc helper drm_crtc_from_index()
  drm: mediatek: use crtc helper drm_crtc_from_index()
  drm: kirin: use crtc helper drm_crtc_from_index()
  drm: exynos: use crtc helper drm_crtc_from_index()
  dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
  drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
  drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
  drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
  drm: bridge: dw-hdmi: Detect PHY type at runtime
  drm: bridge: dw-hdmi: Handle overflow workaround based on device version
  ...

Final block of feature work for 4.11:

- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
  (Libin)
- huc loading support, including uapi for libva to use it (Anusha
  Srivatsa)

* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
  drm/i915: Update DRIVER_DATE to 20170123
  drm/i915: reinstate call to trace_i915_vma_bind
  drm/i915: Assert that created vma has a whole number of pages
  drm/i915: Assert the drm_mm_node is allocated when on the VM lists
  drm/i915: Treat an error from i915_vma_instance() as unlikely
  drm/i915: Reject vma creation larger than address space
  drm/i915: Use common LRU inactive vma bumping for unpin_from_display
  drm/i915: Do an unlocked wait before set-cache-level ioctl
  drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
  drm/i915/huc: Avoid attempting to authenticate non-existent fw
  drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
  drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
  drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
  drm/i915: Release temporary load-detect state upon switching
  drm/i915: Remove i915_gem_object_to_ggtt()
  drm/i915: Remove i915_vma_create from VMA API
  drm/i915: Add a check that the VMA instance we lookup matches the request
  drm/i915: Rename some warts in the VMA API
  drm/i915: Track pinned vma in intel_plane_state
  drm/i915/get_params: Add HuC status to getparams
  ...

This reverts commit 54a07c7b,
and reinstates the original.

[airlied: this might be a bad plan for git].

commit 3846fd9b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jan 11 10:01:17 2017 +0100

    drm/probe-helpers: Drop locking from poll_enable

    It was only needed to protect the connector_list walking, see

    commit 8c4ccc4a
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Jul 9 23:44:26 2015 +0200

        drm/probe-helper: Grab mode_config.mutex in poll_init/enable

    Unfortunately the commit message of that patch fails to mention that
    the new locking check was for the connector_list.

    But that requirement disappeared in

    commit c36a3254
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Dec 15 16:58:43 2016 +0100

        drm: Convert all helpers to drm_connector_list_iter

    and so we can drop this again.

    This fixes a locking inversion on nouveau, where the rpm code needs to
    re-enable. But in other places the rpm_get() calls are nested within
    the big modeset locks.

    While at it, also improve the kerneldoc for these two functions a
    notch.

    v2: Update the kerneldoc even more to explain that these functions
    can't be called concurrently, or bad things happen (Chris).

Backmerge Linus master to get the connector locking revert.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
  sysctl: fix proc_doulongvec_ms_jiffies_minmax()
  Revert "drm/probe-helpers: Drop locking from poll_enable"
  MAINTAINERS: add Dan Streetman to zbud maintainers
  MAINTAINERS: add Dan Streetman to zswap maintainers
  mm: do not export ioremap_page_range symbol for external module
  mn10300: fix build error of missing fpu_save()
  romfs: use different way to generate fsid for BLOCK or MTD
  frv: add missing atomic64 operations
  mm, page_alloc: fix premature OOM when racing with cpuset mems update
  mm, page_alloc: move cpuset seqcount checking to slowpath
  mm, page_alloc: fix fast-path race with cpuset update or removal
  mm, page_alloc: fix check for NULL preferred_zone
  kernel/panic.c: add missing \n
  fbdev: color map copying bounds checking
  frv: add atomic64_add_unless()
  mm/mempolicy.c: do not put mempolicy before using its nodemask
  radix-tree: fix private list warnings
  Documentation/filesystems/proc.txt: add VmPin
  mm, memcg: do not retry precharge charges
  proc: add a schedule point in proc_pid_readdir()
  ...

We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.

We need to do the opposite operation when value is written by user.

Only matters when HZ != 1000
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull pin control fixes from Linus Walleij:
 "A bunch of pin control fixes for v4.10 that didn't get sent off until
  now, sorry for the delay.

  It's only driver fixes:

   - A bunch of fixes to the Intel drivers: broxton, baytrail. Bugs
     related to register offsets, IRQ, debounce functionality.

   - Fix a conflict amongst UART settings on the meson.

   - Fix the ethernet setting on the Uniphier.

   - A compilation warning squelched"

* tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20
  pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
  pinctrl: amd: avoid maybe-uninitalized warning
  pinctrl: baytrail: Do not add all GPIOs to IRQ domain
  pinctrl: baytrail: Rectify debounce support
  pinctrl: intel: Set pin direction properly
  pinctrl: broxton: Use correct PADCFGLOCK offset

Pull drm revert from Dave Airlie:
 "Revert one patch missing some prereqs.

  One of the connector fixes was missing some prereqs, we have an
  alternate driver fix that should work that I'll send tomorrow.

  Today is a holiday here so quickly smashing this out"

Daniel Vetter explains:
 "I pushed a locking change to fix a nouveau rpm issue to -fixes that
  needed the connector_list rework. And that's only in -next, but I
  missed that. Dave has the revert in a pull, and he'll follow-up with
  the hack nouveau patch for 4.10, and then we'll reapply the proper fix
  again for -next and revert the hacks. A bit a mess, but should be
  sorted soon"

* tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/probe-helpers: Drop locking from poll_enable"

Hardware has multiple (2 or 3, depending on model) stride
registers per layer; add a function that correctly takes that
into account. On hardware that only has 2 stride registers,
ensure that 3-plane (YUV) content has identical strides
for both chroma planes.
Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com>
[Removed smart layer stride setup, comment and commit message clarifications]
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

Add the fb->offset[] value to the plane's physical start address
registe. Without that, packed formats are rendered incorrectly.
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

If the device-tree 'reg' node doesn't reserve enough
space for the DP, fail to bind.
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com>
[renamed added function to malidp_has_sufficient_address_space]
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

Refuse to bind if the device-tree compatible string
lists a different hardware version.
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

We're going to use the same format list for output formats, so rename
everything related to input formats to avoid confusion.
Signed-off-by: NBrian Starkey <brian.starkey@arm.com>
[touched commit title to clarify the final struct name]
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

Since tweaking i915_vma_compare() we allowed constructors to skip
clearing the ggtt_view believing that we didn't access the unused
members. That, as it turns out, was not entirely true. In particular,
i915_gem_fault() uses

    ret = remap_io_mapping(area,
	    area->vm_start + (vma->ggtt_view.partial.offset << PAGE_SHIFT),
	    (ggtt->mappable_base + vma->node.start) >> PAGE_SHIFT,
	    min_t(u64, vma->size, area->vm_end - area->vm_start),
	    &ggtt->mappable);

i.e. the ggtt_view.partial for both normal and partial views. If we
allowed garbage into the normal vma->ggtt_view and then try userspace
tried to mmap it, we could explode in an unobvious fashion.

Fixes: 7b92c047 ("drm/i915: Eliminate superfluous i915_ggtt_view_rotated")
Fixes: 3bf4d575 ("drm/i915: Stop clearing i915_ggtt_view")
Reported-by: NMatthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123145245.3972-1-chris@chris-wilson.co.ukTested-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
(cherry picked from commit 7c518460)

This reverts commit 3846fd9b.

There were some precursor commits missing for this around connector
locking, we should probably merge Lyude's nouveau avoid the problem patch.

Pull virtio/vhost fixes from Michael Tsirkin:

 - ARM DMA fixes

 - vhost vsock bugfix

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vring: Force use of DMA API for ARM-based systems with legacy devices
  virtio_mmio: Set DMA masks appropriately
  vhost/vsock: handle vhost_vq_init_access() error

Merge fixes from Andrew Morton:
 "26 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
  MAINTAINERS: add Dan Streetman to zbud maintainers
  MAINTAINERS: add Dan Streetman to zswap maintainers
  mm: do not export ioremap_page_range symbol for external module
  mn10300: fix build error of missing fpu_save()
  romfs: use different way to generate fsid for BLOCK or MTD
  frv: add missing atomic64 operations
  mm, page_alloc: fix premature OOM when racing with cpuset mems update
  mm, page_alloc: move cpuset seqcount checking to slowpath
  mm, page_alloc: fix fast-path race with cpuset update or removal
  mm, page_alloc: fix check for NULL preferred_zone
  kernel/panic.c: add missing \n
  fbdev: color map copying bounds checking
  frv: add atomic64_add_unless()
  mm/mempolicy.c: do not put mempolicy before using its nodemask
  radix-tree: fix private list warnings
  Documentation/filesystems/proc.txt: add VmPin
  mm, memcg: do not retry precharge charges
  proc: add a schedule point in proc_pid_readdir()
  mm: alloc_contig: re-allow CMA to compact FS pages
  mm/slub.c: trace free objects at KERN_INFO
  ...

Add myself as zbud maintainer.

Link: http://lkml.kernel.org/r/20170124221705.26523-1-ddstreet@ieee.orgSigned-off-by: NDan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add myself as zswap maintainer.

Link: http://lkml.kernel.org/r/20170124212200.19052-1-ddstreet@ieee.orgSigned-off-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NSeth Jennings <sjenning@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently, I've found cases in which ioremap_page_range was used
incorrectly, in external modules, leading to crashes.  This can be
partly attributed to the fact that ioremap_page_range is lower-level,
with fewer protections, as compared to the other functions that an
external module would typically call.  Those include:

     ioremap_cache
     ioremap_nocache
     ioremap_prot
     ioremap_uc
     ioremap_wc
     ioremap_wt

...each of which wraps __ioremap_caller, which in turn provides a safer
way to achieve the mapping.

Therefore, stop EXPORT-ing ioremap_page_range.

Link: http://lkml.kernel.org/r/1485173220-29010-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Suggested-by: NJohn Hubbard <jhubbard@nvidia.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When CONFIG_FPU is not enabled on arch/mn10300, <asm/switch_to.h> causes
a build error with a call to fpu_save():

  kernel/built-in.o: In function `.L410':
  core.c:(.sched.text+0x28a): undefined reference to `fpu_save'

Fix this by including <asm/fpu.h> in <asm/switch_to.h> so that an empty
static inline fpu_save() is defined.

Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reviewed-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8a59f5d2 ("fs/romfs: return f_fsid for statfs(2)") generates
a 64bit id from sb->s_bdev->bd_dev.  This is only correct when romfs is
defined with CONFIG_ROMFS_ON_BLOCK.  If romfs is only defined with
CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev
will triger an oops.

Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y,
both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined.
Therefore when calling huge_encode_dev() to generate a 64bit id, I use
the follow order to choose parameter,

- CONFIG_ROMFS_ON_BLOCK defined
  use sb->s_bdev->bd_dev
- CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined
  use sb->s_dev when,
- both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined
  leave id as 0

When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev
is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index,
otherwise sb->s_dev is 0.

This is a try-best effort to generate a uniq file system ID, if all the
above conditions are not meet, f_fsid of this romfs instance will be 0.
Generally only one romfs can be built on single MTD block device, this
method is enough to identify multiple romfs instances in a computer.

Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.deSigned-off-by: NColy Li <colyli@suse.de>
Reported-by: NNong Li <nongli1031@gmail.com>
Tested-by: NNong Li <nongli1031@gmail.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some more atomic64 operations were missing and as a result frv
allmodconfig was failing.  Add the missing operations.

Link: http://lkml.kernel.org/r/1485193844-12850-1-git-send-email-sudip.mukherjee@codethink.co.ukSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode
triggers OOM killer in few seconds, despite lots of free memory.  The
test attempts to repeatedly fault in memory in one process in a cpuset,
while changing allowed nodes of the cpuset between 0 and 1 in another
process.

The problem comes from insufficient protection against cpuset changes,
which can cause get_page_from_freelist() to consider all zones as
non-eligible due to nodemask and/or current->mems_allowed.  This was
masked in the past by sufficient retries, but since commit 682a3385
("mm, page_alloc: inline the fast path of the zonelist iterator") we fix
the preferred_zoneref once, and don't iterate over the whole zonelist in
further attempts, thus the only eligible zones might be placed in the
zonelist before our starting point and we always miss them.

A previous patch fixed this problem for current->mems_allowed.  However,
cpuset changes also update the task's mempolicy nodemask.  The fix has
two parts.  We have to repeat the preferred_zoneref search when we
detect cpuset update by way of seqcount, and we have to check the
seqcount before considering OOM.

[akpm@linux-foundation.org: fix typo in comment]
Link: http://lkml.kernel.org/r/20170120103843.24587-5-vbabka@suse.cz
Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NGanapatrao Kulkarni <gpkulkarni@gmail.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparation for the following patch to make review simpler.
While the primary motivation is a bug fix, this also simplifies the fast
path, although the moved code is only enabled when cpusets are in use.

Link: http://lkml.kernel.org/r/20170120103843.24587-4-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode
triggers OOM killer in few seconds, despite lots of free memory.  The
test attempts to repeatedly fault in memory in one process in a cpuset,
while changing allowed nodes of the cpuset between 0 and 1 in another
process.

One possible cause is that in the fast path we find the preferred
zoneref according to current mems_allowed, so that it points to the
middle of the zonelist, skipping e.g.  zones of node 1 completely.  If
the mems_allowed is updated to contain only node 1, we never reach it in
the zonelist, and trigger OOM before checking the cpuset_mems_cookie.

This patch fixes the particular case by redoing the preferred zoneref
search if we switch back to the original nodemask.  The condition is
also slightly changed so that when the last non-root cpuset is removed,
we don't miss it.

Note that this is not a full fix, and more patches will follow.

Link: http://lkml.kernel.org/r/20170120103843.24587-3-vbabka@suse.cz
Fixes: 682a3385 ("mm, page_alloc: inline the fast path of the zonelist iterator")
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NGanapatrao Kulkarni <gpkulkarni@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "fix premature OOM regression in 4.7+ due to cpuset races".

This is v2 of my attempt to fix the recent report based on LTP cpuset
stress test [1].  The intention is to go to stable 4.9 LTSS with this,
as triggering repeated OOMs is not nice.  That's why the patches try to
be not too intrusive.

Unfortunately why investigating I found that modifying the testcase to
use per-VMA policies instead of per-task policies will bring the OOM's
back, but that seems to be much older and harder to fix problem.  I have
posted a RFC [2] but I believe that fixing the recent regressions has a
higher priority.

Longer-term we might try to think how to fix the cpuset mess in a better
and less error prone way.  I was for example very surprised to learn,
that cpuset updates change not only task->mems_allowed, but also
nodemask of mempolicies.  Until now I expected the parameter to
alloc_pages_nodemask() to be stable.  I wonder why do we then treat
cpusets specially in get_page_from_freelist() and distinguish HARDWALL
etc, when there's unconditional intersection between mempolicy and
cpuset.  I would expect the nodemask adjustment for saving overhead in
g_p_f(), but that clearly doesn't happen in the current form.  So we
have both crazy complexity and overhead, AFAICS.

[1] https://lkml.kernel.org/r/CAFpQJXUq-JuEP=QPidy4p_=FN0rkH5Z-kfB4qBvsf6jMS87Edg@mail.gmail.com
[2] https://lkml.kernel.org/r/7c459f26-13a6-a817-e508-b65b903a8378@suse.cz

This patch (of 4):

Since commit c33d6c06 ("mm, page_alloc: avoid looking up the first
zone in a zonelist twice") we have a wrong check for NULL preferred_zone,
which can theoretically happen due to concurrent cpuset modification.  We
check the zoneref pointer which is never NULL and we should check the zone
pointer.  Also document this in first_zones_zonelist() comment per Michal
Hocko.

Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Link: http://lkml.kernel.org/r/20170120103843.24587-2-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>