commit 63cb44441826e842b7285575b96db631cc9f2505 upstream.

This may confuse user-space clients like plymouth that opens a drm
file descriptor as a result of a hotplug event and then generates a
new event...

Cc: <stable@vger.kernel.org>
Fixes: 5ea17348 ("drm/vmwgfx: Send a hotplug event at master_set")
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NDeepak Rawat <drawat@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 61b51fb51c01a519a249d28ec55c6513a13be5a3 upstream.

The allocated pages need to be invalidated in CPU caches. On ARM32 the
DMA_BIDIRECTIONAL flag only ensures that data is written-back to DRAM and
the data stays in CPU cache lines. While the DMA_FROM_DEVICE flag ensures
that the corresponding CPU cache lines are getting invalidated and nothing
more, that's exactly what is needed for a newly allocated pages.

This fixes randomly failing rendercheck tests on Tegra30 using the
Opentegra driver for tests that use small-sized pixmaps (10x10 and less,
i.e. 1-2 memory pages) because apparently CPU reads out stale data from
caches and/or that data is getting evicted to DRAM at the time of HW job
execution.

Fixes: bd43c9f0 ("drm/tegra: gem: Map pages via the DMA API")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 342406e4fbba9a174125fbfe6aeac3d64ef90f76 upstream.

For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:

[  130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff

Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.

Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:

  CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
  Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
  RIP: 0010:ioread32+0x2b/0x30
  Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
  48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
  40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
  RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
  RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
  RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
  RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
  R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
  R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
  FS:  00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   g94_i2c_aux_xfer+0x326/0x850 [nouveau]
   nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
   __i2c_transfer+0x14b/0x620
   i2c_smbus_xfer_emulated+0x159/0x680
   ? _raw_spin_unlock_irqrestore+0x1/0x60
   ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
   ? __lock_is_held+0x59/0xa0
   __i2c_smbus_xfer+0x138/0x5a0
   i2c_smbus_xfer+0x4f/0x80
   i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
   i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
   do_vfs_ioctl+0x408/0x750
   ksys_ioctl+0x5e/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x60/0x1e0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f25317f546b
  Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
  ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
  RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
  RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
  R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
  R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
  watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]

Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.

Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.

Changes since v1:
* Also disable i2c busses that run over DP AUX
Signed-off-by: NLyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ]

The Allwinner BSP makes sure that we don't end up with a null start delay
or with a delay larger than vtotal.

The former condition is likely to happen now with the reworked start delay,
so make sure we enforce the same boundaries.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ]

The current calculation for the video start delay in the current DSI driver
is that it is the total vertical size, minus the front porch and sync length,
plus 1. This equals to the active vertical size plus the back porch plus 1.

That 1 is coming in the Allwinner BSP from an variable that is set to 1.
However, if we look at the Allwinner BSP more closely, and especially in
the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can
see that this variable is actually computed from the porches and the sync
minus 10, clamped between 8 and 100.

This fixes the start delay symptom we've seen on some panels (vblank
timeouts with vertical white stripes at the bottom of the panel).
Reviewed-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ]

After an event is sent, we try to copy it into the user buffer of the
first waiter in drm_read() and if the user buffer doesn't have enough
room we put it back onto the list. However, we didn't wake up any
subsequent waiter, so that event may sit on the list until either a new
vblank event is sent or a new waiter appears. Rare, but in the worst
case may lead to a stuck process.

Testcase: igt/drm_read/short-buffer-wakeup
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.ukSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ]

This makes it safe to access drm_device->dev after the parent device has
been removed/unplugged.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ]

Noted in review by Dave Emett for V3D 4.2 support.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.netReviewed-by: NDave Emett <david.emett@broadcom.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ]

Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not
paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves
the DSS clocks enabled when the display is blanked wasting about extra
5mW of power while idle.

The clock that is left on by not calling dss_pll_disable() is
DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for
DSI PLL.

We can fix this issue by by making the current dsi_pll_uninit() into
dsi_pll_disable(). This way we can just call dss_pll_disable() from
dsi_display_uninit_dsi() and the code becomes a bit easier to follow.

However, we need to also consider that DSI PLL can be muxed for DVI too
as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI
case, we want to unconditionally disable the clocks. To get around this
issue, we separate out the DSI lane handling from dsi_pll_enable() and
dsi_pll_disable() as suggested by Tomi in an earlier experimental patch.

So we must only toggle the DSI regulator based on the vdds_dsi_enabled
flag from dsi_display_init_dsi() and dsi_display_uninit_dsi().

We need to make these two changes together to avoid breaking things
for DVI when fixing the DSI clock handling. And this all causes a
slight renumbering of the error path for dsi_display_init_dsi().
Suggested-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ]

[Why]
The kms_plane@plane-position-covered-pipe-*-planes subtests can produce
a sequence of atomic commits such that neither active_changed nor
mode_changed but connectors_changed.

When this happens we remove the old stream from the context and add
a new stream but the new stream doesn't have mode_changed=true set.

This incorrect programming sequence causes CRC mismatches to occur in
the test.

The stream->mode_changed value should be set whenever a new stream
is created.

[How]
A new stream is created whenever drm_atomic_crtc_needs_modeset is true.
We previously covered the active_changed and mode_changed conditions
for the CRTC but connectors_changed is also checked within
drm_atomic_crtc_needs_modeset.

So just use drm_atomic_crtc_needs_modeset directly to determine the
mode_changed flag.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ]

Check if we get any values equal to 0, and set to 1 if so.
Signed-off-by: NMurton Liu <murton.liu@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NSivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a89bfc5d9a0732d84b4de311e27133daa0586316 ]

Buffers passed to spi_sync() must be dma-safe even for tiny buffers since
some SPI controllers use DMA for all transfers.

Example splat with CONFIG_DMA_API_DEBUG enabled:

[   23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d]
[   23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190
[   23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm
[   23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236
[   23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[   23.750620] RIP: 0010:check_for_stack+0xb7/0x190
[   23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54
[   23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286
[   23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006
[   23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450
[   23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0
[   23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c
[   23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001
[   23.750679] FS:  0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690
[   23.750686] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[   23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0
[   23.750696] Call Trace:
[   23.750713]  debug_dma_map_sg+0x100/0x340
[   23.750727]  ? dma_direct_map_sg+0x3b/0xb0
[   23.750739]  spi_map_buf+0x25a/0x300
[   23.750751]  __spi_pump_messages+0x2a4/0x680
[   23.750762]  __spi_sync+0x1dd/0x1f0
[   23.750773]  spi_sync+0x26/0x40
[   23.750790]  mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi]
[   23.750802]  ? spi_finalize_current_transfer+0x10/0x10
[   23.750821]  mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi]
Reported-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bc2193992b00488f5734613ac95b78ef2d2803ab ]

Releasing planes should not release the 2nd odm pipe right away,
this change leaves us with 2 pipes with null planes and same stream
when planes are released during odm.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0084c3c71126fc878c6dab8a6ab8ecc484c2be02 ]

At the end of initialization, a delay is required by the panel. Without
this delay, the panel could received a frame early & generate a crash of
panel (black screen).
Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
Reviewed-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155445-13407-1-git-send-email-yannick.fertre@st.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bc29d3a69d4c1bd1a103e8b3c1ed81b807c1870b ]

The call to of_find_matching_node_and_match returns a node pointer with
refcount incremented thus it must be explicitly decremented after the
last usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD)
Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS)
Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cnSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3d2aca8c8620346abdba96c6300d2c0b90a1d0cc ]

We don't hold a reference to the old fence, so it can go away
any time we are waiting for it to signal.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1262cc8893ecb0eb2c21e042d0d268cc180edb61 ]

During boot, I get this kernel warning:

WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc
etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536]
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000
caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables
CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<c0019658>] (unwind_backtrace) from [<c001489c>] (show_stack+0x10/0x14)
[<c001489c>] (show_stack) from [<c07fb420>] (dump_stack+0x9c/0xd4)
[<c07fb420>] (dump_stack) from [<c00312dc>] (__warn+0xf8/0x124)
[<c00312dc>] (__warn) from [<c00313d0>] (warn_slowpath_fmt+0x38/0x48)
[<c00313d0>] (warn_slowpath_fmt) from [<c00b14e8>] (debug_dma_map_sg+0x284/0x3dc)
[<c00b14e8>] (debug_dma_map_sg) from [<c046eb40>] (drm_gem_map_dma_buf+0xc4/0x13c)
[<c046eb40>] (drm_gem_map_dma_buf) from [<c04c3314>] (dma_buf_map_attachment+0x38/0x5c)
[<c04c3314>] (dma_buf_map_attachment) from [<c046e728>] (drm_gem_prime_import_dev+0x74/0x104)
[<c046e728>] (drm_gem_prime_import_dev) from [<c046e5bc>] (drm_gem_prime_fd_to_handle+0x84/0x17c)
[<c046e5bc>] (drm_gem_prime_fd_to_handle) from [<c046edd0>] (drm_prime_fd_to_handle_ioctl+0x38/0x4c)
[<c046edd0>] (drm_prime_fd_to_handle_ioctl) from [<c0460efc>] (drm_ioctl_kernel+0x90/0xc8)
[<c0460efc>] (drm_ioctl_kernel) from [<c0461114>] (drm_ioctl+0x1e0/0x3b0)
[<c0461114>] (drm_ioctl) from [<c01cae20>] (do_vfs_ioctl+0x90/0xa48)
[<c01cae20>] (do_vfs_ioctl) from [<c01cb80c>] (ksys_ioctl+0x34/0x60)
[<c01cb80c>] (ksys_ioctl) from [<c0009000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd81a9fa8 to 0xd81a9ff0)
9fa0:                   b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600
9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8
9fe0: b6989f18 bec613dc b697185c b667be5c
irq event stamp: 47905
hardirqs last  enabled at (47913): [<c0098824>] console_unlock+0x46c/0x680
hardirqs last disabled at (47922): [<c0098470>] console_unlock+0xb8/0x680
softirqs last  enabled at (47754): [<c000a484>] __do_softirq+0x344/0x540
softirqs last disabled at (47701): [<c0038700>] irq_exit+0x124/0x144
---[ end trace af477747acbcc642 ]---

The reason is the contiguous buffer exceeds the default maximum segment
size of 64K as specified by dma_get_max_seg_size() in
linux/dma-mapping.h.  Fix this by providing our own segment size, which
is set to 2GiB to cover the window found in MMUv1 GPUs.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6cd5235c3135ea84b32469ea51b2aae384eda8af ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sharat Masetty <smasetty@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f10b83de1fd49216a4c657816f48001437e4bdd5 ]

If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e02bc29b2cfa7806830d6da8b2322cddd67e8dfe ]

Our components may still be using the DRM device driver (if only to
access our driver's private data), so make sure to unbind them before
the final drm_dev_put.

Also release our reserved memory after component unbind instead of
before to match reverse creation order.

Fixes: f5a9ed867c83 ("drm/sun4i: Fix component unbinding and component master deletion")
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424090413.6918-1-paul.kocialkowski@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7bcde275eb1d0ac8793c77c7e666a886eb16633d ]

In order to make sure that the plane color space gets reset correctly.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ]

Initialize the flow input colorspaces to unknown and reset to that value
when the channel gets disabled. This avoids the state getting mixed up
with a previous mode.

Also keep the CSC settings for the background flow intact when disabling
the foreground flow.
Root-caused-by: NJonathan Marek <jonathan@marek.ca>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f5a9ed867c83875546c9aadd4ed8e785e9adcc3c ]

For our component-backed driver to be properly removed, we need to
delete the component master in sun4i_drv_remove and make sure to call
component_unbind_all in the master's unbind so that all components are
unbound when the master is.

Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-4-paul.kocialkowski@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 02b92adbe33e6dbd15dc6e32540b22f47c4ff0a2 ]

Our sun4i_drv_unbind gets the drm device using dev_get_drvdata.
However, that driver data is never set in sun4i_drv_bind.

Set it there to avoid getting a NULL pointer at unbind time.

Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-3-paul.kocialkowski@bootlin.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c238bfe0be9ef7420f7669a69e27c8c8f4d8a568 ]

[Why]
On some compositors, with two monitors attached, VT terminal
switch can cause a graphical issue by the following means:

There are two streams, one for each monitor. Each stream has one
plane

current state:
	M1:S1->P1
	M2:S2->P2

The user calls for a terminal switch and a commit is made to
change both planes to linear swizzle mode. In atomic check,
a new dc_state is constructed with new planes on each stream

new state:
	M1:S1->P3
	M2:S2->P4

In commit tail, each stream is committed, one at a time. The first
stream (S1) updates properly, triggerring a full update and replacing
the state

current state:
	M1:S1->P3
	M2:S2->P4

The update for S2 comes in, but dc detects that there is no difference
between the stream and plane in the new and current states, and so
triggers a fast update. The fast update does not program swizzle,
so the second monitor is corrupted

[How]
Add a flag to dc_plane_state that forces full updates

When a stream undergoes a full update, set this flag on all changed
planes, then clear it on the current stream

Subsequent streams will get full updates as a result
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com>
Acked-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f4bbebf8e7eb4d294b040ab2d2ba71e70e69b930 ]

[Why]
AUX takes longer to reply when using active DP-DVI dongle on some asics
resulting in up to 2000+ us edid read (timeout).

[How]
1. Adjust AUX poll to match spec
2. Extend the SW timeout. This does not affect normal
operation since we exit the loop as soon as AUX acks.
Signed-off-by: NMartin Leung <martin.leung@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NJoshua Aberback <Joshua.Aberback@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2ae2c3316fb77dcf64275d011596b60104c45426 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function.
drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function.
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1a07a94b47b1f528f39c3e6187b5eaf02efe44ea ]

There are two problems here:

1. Not all clk_data->hws[] need to be initialized, depending on various
   configured quirks. This leads to NULL ptr deref in
   clk_hw_unregister_gate() in sun8i_tcon_top_unbind()
2. If there is error when registering the clk_data->hws[],
   err_unregister_gates error path will try to unregister
   IS_ERR()=true (invalid) pointer.

For problem (1) I have this stack trace:

Unable to handle kernel NULL pointer dereference at virtual
  address 0000000000000008
Call trace:
 clk_hw_unregister+0x8/0x18
 clk_hw_unregister_gate+0x14/0x28
 sun8i_tcon_top_unbind+0x2c/0x60
 component_unbind.isra.4+0x2c/0x50
 component_bind_all+0x1d4/0x230
 sun4i_drv_bind+0xc4/0x1a0
 try_to_bring_up_master+0x164/0x1c0
 __component_add+0xa0/0x168
 component_add+0x10/0x18
 sun8i_dw_hdmi_probe+0x18/0x20
 platform_drv_probe+0x3c/0x70
 really_probe+0xcc/0x278
 driver_probe_device+0x34/0xa8

Problem (2) was identified by head scratching.
Signed-off-by: NOndrej Jirman <megous@megous.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405233048.3823-1-megous@megous.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c1cefe115d1cdc460014483319d440b2f0d07c68 ]

[Why]
the member sdr_white_level of struct dc_cursor_attributes was not
initialized, then the random value result that
dcn10_set_cursor_sdr_white_level() set error hw_scale value 0x20D9(normal
value is 0x3c00), this cause the black cursor issue.

[how]
just initilize the obj of struct dc_cursor_attributes to zero to avoid
the random value.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NTianci Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d85978341e6a32e7443d9f28639da254d53f400 ]

We don't want to overwrite "ret", it already holds the correct error
code.  The "regmap" variable might be a valid pointer as this point.

Fixes: 8f83f268 ("drm/mediatek: Add HDMI support")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 36a1da15b5df493241b0011d2185fdd724ac1ed1 ]

If CONFIG_OMAP4_DSS_HDMI_CEC is enabled in .config, deeper SoC idle
states are blocked because the CEC clock gets always enabled on init.

Let's fix the issue by moving the CEC clock handling to happen later in
hdmi_cec_adap_enable() as suggested by Hans Verkuil <hverkuil@xs4all.nl>.
This way the CEC clock gets only enabled when needed. This can be tested
by doing cec-ctl --playback to enable the CEC, and doing cec-ctl --clear
to disable it.

Let's also fix the typo for "divider" in the comments while at it.

Fixes: 8d7f934d ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support")
Suggested-by: NHans Verkuil <hverkuil@xs4all.nl>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326151438.32414-1-tony@atomide.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d8f92897ad816f5dda54b2ed2fd9f2d7cb1abde ]

meson_drv_unbind() doesn't unregister the IRQ handler, which can lead to
use-after-free if the IRQ fires after unbind:

[   64.656876] Unable to handle kernel paging request at virtual address ffff000011706dbc
...
[   64.662001] pc : meson_irq+0x18/0x30 [meson_drm]

I'm assuming that a similar problem could happen on the error path of
bind(), so uninstall the IRQ handler there as well.

Fixes: bbbe775e ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-2-jean-philippe.brucker@arm.comSigned-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>

[ Upstream commit 776e78677f514ecddd12dba48b9040958999bd5a ]

meson_drv_bind() registers a meson_drm struct as the device's privdata,
but meson_drv_unbind() tries to retrieve a drm_device. This may cause a
segfault on shutdown:

[ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197
 ...
[ 5194.788850] Call trace:
[ 5194.791349]  drm_dev_unregister+0x1c/0x118 [drm]
[ 5194.795848]  meson_drv_unbind+0x50/0x78 [meson_drm]

Retrieve the right pointer in meson_drv_unbind().

Fixes: bbbe775e ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-1-jean-philippe.brucker@arm.comSigned-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>

[ Upstream commit 3f04e0a6cfebf48152ac64502346cdc258811f79 ]

If userspace has open fd(s) when drm_dev_unplug() is run, it will result
in drm_dev_unregister() being called twice. First in drm_dev_unplug() and
then later in drm_release() through the call to drm_put_dev().

Since userspace already holds a ref on drm_device through the drm_minor,
it's not necessary to add extra ref counting based on no open file
handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug().

We now have this:
- Userpace holds a ref on drm_device as long as there's open fd(s)
- The driver holds a ref on drm_device as long as it's bound to the
  struct device

When both sides are done with drm_device, it is released.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.orgSigned-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>

[ Upstream commit 7cf77b273a8fc51e7de622fa6691abd4436a9a6b ]
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>

commit 462ce5d963f18b71c63f6b7730a35a2ee5273540 upstream.

A pointer to crtc was missing, resulting in the following build error:
drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types)
drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse:    expected struct drm_crtc *crtc
drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse:    got struct drm_crtc_state *state
drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Nkbuild test robot <lkp@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/2b6ed5e6-81b0-4276-8860-870b54ca3262@linux.intel.com
Fixes: d08106796a78 ("drm/vc4: Fix memory leak during gpu reset.")
Cc: <stable@vger.kernel.org> # v4.6+
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9fa246256e09dc30820524401cdbeeaadee94025 upstream.

This reverts commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5.

This commit is documented to break userspace X.org modesetting driver in certain configurations.

The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.

This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806Signed-off-by: NDave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d08106796a78a4273e39e1bbdf538dc4334b2635 upstream.

__drm_atomic_helper_crtc_destroy_state does not free memory, it only
cleans it up. Fix this by calling the functions own destroy function.

Fixes: 6d6e5003 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.")
Cc: Eric Anholt <eric@anholt.net>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-2-maarten.lankhorst@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e4056bbb6719fe713bfc4030ac78e8e97ddf7574 ]

This is basically the same fix as in
commit fa68d4f8476b ("drm/rockchip: fix for mailbox read size")
but for cdn_dp_mailbox_validate_receive function.

See patchwork.kernel.org/patch/10671981/ for details.
Signed-off-by: NDamian Kos <dkos@cadence.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.comSigned-off-by: NSasha Levin <sashal@kernel.org>

commit 1925e7d3d4677e681cc2e878c2bdbeaee988c8e2 upstream.

Got accidently dropped when 2+1 level support was added.

Fixes: 6a42fd6f ("drm/amdgpu: implement 2+1 PD support for Raven v3")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>