This patch adds support for configuring SRQ and provides the necessary
APIs for rdma upper layer driver (qedr) to enable the SRQ feature.
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NAriel Elior <ariel.elior@cavium.com>
Signed-off-by: NYuval Bason <yuval.bason@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Varsha Rao says:

====================
net: bnx2: Fix checkpatch and clang warnings

This patchset fixes NULL comparison and extra parentheses, checkpatch
and clang warnings.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the checkpatch issue of NULL comparison. Replace x == NULL
with !x, by using the following coccinelle script:

@disable is_null@
expression e;
@@
-e==NULL
+!e
Signed-off-by: NVarsha Rao <rvarsha016@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following coccinelle script removes extra parentheses to fix the
clang warning of extraneous parentheses.

@disable paren@
identifier i;
expression e;
statement s;
@@
if (
-(i == e)
+i == e
 )
s
Suggested-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NVarsha Rao <rvarsha016@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in gemini dev_warn message
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We incorrectly compare the mask and the result is that we can't modify
an already existing rule.

Fix that by comparing correctly.

Fixes: 05cd271f ("cls_flower: Support multiple masks per priority")
Reported-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When destroying the instance, destroy the head rhashtable.

Fixes: 05cd271f ("cls_flower: Support multiple masks per priority")
Reported-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

<linux/skbuff.h> does not use nor need <linux/slab.h>, so drop this
header file from skbuff.h.

<linux/skbuff.h> is currently #included in around 1200 C source and
header files, making it the 31st most-used header file.

Build tested [allmodconfig] on 20 arch-es.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use dma_zalloc_coherent for allocating zeroed
memory and remove unnecessary memset function.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sometimes an in-progress call will stop responding on the fileserver when
the fileserver quietly cancels the call with an internally marked abort
(RX_CALL_DEAD), without sending an ABORT to the client.

This causes the client's call to eventually expire from lack of incoming
packets directed its way, which currently leads to it being cancelled
locally with ETIME.  Note that it's not currently clear as to why this
happens as it's really hard to reproduce.

The rotation policy implement by kAFS, however, doesn't differentiate
between ETIME meaning we didn't get any response from the server and ETIME
meaning the call got cancelled mid-flow.  The latter leads to an oops when
fetching data as the rotation partially resets the afs_read descriptor,
which can result in a cleared page pointer being dereferenced because that
page has already been filled.

Handle this by the following means:

 (1) Set a flag on a call when we receive a packet for it.

 (2) Store the highest packet serial number so far received for a call
     (bearing in mind this may wrap).

 (3) If, when the "not received anything recently" timeout expires on a
     call, we've received at least one packet for a call and the connection
     as a whole has received packets more recently than that call, then
     cancel the call locally with ECONNRESET rather than ETIME.

     This indicates that the call was definitely in progress on the server.

 (4) In kAFS, if the rotation algorithm sees ECONNRESET rather than ETIME,
     don't try the next server, but rather abort the call.

     This avoids the oops as we don't try to reuse the afs_read struct.
     Rather, as-yet ungotten pages will be reread at a later data.

Also:

 (5) Add an rxrpc tracepoint to log detection of the call being reset.

Without this, I occasionally see an oops like the following:

    general protection fault: 0000 [#1] SMP PTI
    ...
    RIP: 0010:_copy_to_iter+0x204/0x310
    RSP: 0018:ffff8800cae0f828 EFLAGS: 00010206
    RAX: 0000000000000560 RBX: 0000000000000560 RCX: 0000000000000560
    RDX: ffff8800cae0f968 RSI: ffff8800d58b3312 RDI: 0005080000000000
    RBP: ffff8800cae0f968 R08: 0000000000000560 R09: ffff8800ca00f400
    R10: ffff8800c36f28d4 R11: 00000000000008c4 R12: ffff8800cae0f958
    R13: 0000000000000560 R14: ffff8800d58b3312 R15: 0000000000000560
    FS:  00007fdaef108080(0000) GS:ffff8800ca680000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fb28a8fa000 CR3: 00000000d2a76002 CR4: 00000000001606e0
    Call Trace:
     skb_copy_datagram_iter+0x14e/0x289
     rxrpc_recvmsg_data.isra.0+0x6f3/0xf68
     ? trace_buffer_unlock_commit_regs+0x4f/0x89
     rxrpc_kernel_recv_data+0x149/0x421
     afs_extract_data+0x1e0/0x798
     ? afs_wait_for_call_to_complete+0xc9/0x52e
     afs_deliver_fs_fetch_data+0x33a/0x5ab
     afs_deliver_to_call+0x1ee/0x5e0
     ? afs_wait_for_call_to_complete+0xc9/0x52e
     afs_wait_for_call_to_complete+0x12b/0x52e
     ? wake_up_q+0x54/0x54
     afs_make_call+0x287/0x462
     ? afs_fs_fetch_data+0x3e6/0x3ed
     ? rcu_read_lock_sched_held+0x5d/0x63
     afs_fs_fetch_data+0x3e6/0x3ed
     afs_fetch_data+0xbb/0x14a
     afs_readpages+0x317/0x40d
     __do_page_cache_readahead+0x203/0x2ba
     ? ondemand_readahead+0x3a7/0x3c1
     ondemand_readahead+0x3a7/0x3c1
     generic_file_buffered_read+0x18b/0x62f
     __vfs_read+0xdb/0xfe
     vfs_read+0xb2/0x137
     ksys_read+0x50/0x8c
     do_syscall_64+0x7d/0x1a0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note the weird value in RDI which is a result of trying to kmap() a NULL
page pointer.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let user space set whatever it would like to advertise for the
tun interface.  Preserve the existing defaults.
Signed-off-by: NChas Williams <3chas3@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
sh_eth: fix & clean up sh_eth_soft_swap()

Here's a set of 3 patches against DaveM's 'net-next.git' repo. First one fixes an
old buffer endiannes issue (luckily, the ARM SoCs are smart enough to not actually
care) plus couple clean ups around sh_eth_soft_swap()...
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When initializing 'maxp' in sh_eth_soft_swap(), the buffer length needs
to be rounded  up -- that's just asking for DIV_ROUND_UP()!
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sh_eth_tsu_soft_swap() is called twice by the driver, remove *inline* and
move  that function  from the header to the driver itself to let gcc decide
whether to expand it inline or not...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Browsing  thru the driver disassembly, I noticed that ARM gcc generated
no  code  whatsoever for sh_eth_soft_swap() while building a little-endian
kernel -- apparently __LITTLE_ENDIAN__ was not being #define'd, however
it got implicitly #define'd when building with the SH gcc (I could only
find the explicit #define __LITTLE_ENDIAN that was #include'd when building
a little-endian kernel).  Luckily, the Ether controller  only doing big-
endian DMA is encountered on the early SH771x SoCs only and all ARM SoCs
implement EDMR.DE and thus set 'sh_eth_cpu_data::hw_swap'. But anyway, we
need to fix the #ifdef inside sh_eth_soft_swap() to something that would
work on all architectures...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Fixes in offloading of mirror-to-gretap

Petr says:

These two patches fix issues in offloading of mirror-to-gretap when
bridge is present in the underlay.

In patch #1, reconsideration of SPAN configuration is not done right at
the point that SWITCHDEV_OBJ_ID_PORT_VLAN deletion notification is
distributed, but is postponed, because the notifications are actually
distributed before the relevant change is implemented in the bridge.

In patch #2, a problem in configuring VLAN tagging in situations when a
VLAN device is on top of an 802.1Q bridge whose egress port is marked as
"egress untagged". In that case, mlxsw would neglect to suppress the
tagging implicitly assumed after the VLAN device was seen.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When offloading mirroring to gretap or ip6gretap netdevices, an 802.1q
bridge is one of the soft devices permissible in the underlay when
resolving the packet path. After the packet path is resolved to a
particular bridge egress device, flags on packet VLAN determine whether
the egressed packet should be tagged.

The current logic however only ever sets the VLAN tag, never suppresses
it. Thus if there's a VLAN netdevice above the bridge that determines
the packet VLAN, that VLAN is never unset, and mirroring is configured
with VLAN tagging.

Fix by setting the packet VLAN on both branches: set to zero (for unset)
when BRIDGE_VLAN_INFO_UNTAGGED, copy the resolved VLAN (e.g. from bridge
PVID) otherwise.

Fixes: 946a11e7 ("mlxsw: spectrum_span: Allow bridge for gretap mirror")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VLAN deletion notifications are emitted before the relevant change is
projected to bridge configuration. Thus, like with VLAN addition,
schedule SPAN respin for later.

Fixes: c520bc69 ("mlxsw: Respin SPAN on switchdev events")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also inconsistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.

Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().

Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes: f70ea018 ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 87ae68c8.

Applied the wrong version of this fix, correct version
coming up.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also incosistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.

Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().

Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes: f70ea018 ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Tested-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: db9d7d36 ("net: mvpp2: Split the PPv2 driver to a dedicated directory")
Signed-off-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot was able to trick af_packet again [1]

Various commits tried to address the problem in the past,
but failed to take into account V3 header size.

[1]

tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96
BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106

CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436
 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
 prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline]
 packet_current_rx_frame net/packet/af_packet.c:1117 [inline]
 tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282
 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018
 xmit_one net/core/dev.c:3049 [inline]
 dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069
 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617
 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:277 [inline]
 ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491
 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633
 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the page:
page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80
raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2b6867c2 ("net/packet: fix overflow in check for priv area size")
Fixes: dc808110 ("packet: handle too big packets for PACKET_V3")
Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function aq_fw2x_get_mac_permanent is local to the source and does
not need to be in global scope, so make it static.

Cleans up sparse warning:
warning: symbol 'aq_fw2x_get_mac_permanent' was not declared. Should it
be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the right device to determine if redirect should be sent especially
when using vrf. Same as well as when sending the redirect.
Signed-off-by: NStephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the clang warning of extraneous parentheses, with the
following coccinelle script.

@@
identifier i;
expression e;
statement s;
@@
if (
-(i == e)
+i == e
 )
s
Suggested-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NVarsha Rao <rvarsha016@gmail.com>
Acked-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds support for Flexible PPS output (which is equivalent
to per_out output of PTP subsystem).

Tested using an oscilloscope and the following commands:

1) Start PTP4L:
	# ptp4l -A -4 -H -m -i eth0 &
2) Set Flexible PPS frequency:
	# echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period

Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp
of eth0.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed: Fix issues in UFP feature commit 'cac6f691'.

This patch series fixes couple of issues in the UFP feature commit,
   cac6f691: Add support for Unified Fabric Port.

Changes from previous version:
------------------------------
v2: Added "Fixes:" tag.

Please consider applying it to "net-next".
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Incorrect shared memory address is used while deriving the values
for tc and pri_type. Use shmem address corresponding to 'oem_cfg_func'
where the management firmare saves tc/pri_type values.

Fixes: cac6f691 ("qed: Add support for Unified Fabric Port")
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NAriel Elior <ariel.elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The structure shared between driver and management firmware (MFW)
differ in sizes. The additional field defined by the MFW is not
relevant to the current driver. Add a dummy field to the structure.

Fixes: cac6f691 ("qed: Add support for Unified Fabric Port")
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NAriel Elior <ariel.elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Petr Machata says:

====================
selftests: forwarding: mirror_vlan: Fixlets

This patchset includes two small fixes for the tests that were
introduced in commit 1bb58d2d ("Merge branch
'Mirroring-tests-involving-VLAN'").

In patch #1, a "tc action trap" is uninstalled after the suite runs,
instead of being installed again.

In patch #2, a test in suite is renamed to differentiate it from another
test of the same name.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The test description is displayed with the PASS/FAIL resolution after
the test is ran. There however already is one other test described
exactly like this, which makes it unclear which of the tests passed or
failed. Make the description unique.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of installing a trap before tests run and uninstalling it after
they run, mirror_vlan.sh installs it twice due to a typo. Fix the typo.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Willem de Bruijn says:

====================
selftests/net: various

A few odds and ends to network tests:

- msg_zerocopy: run as part of kselftest
- udp gso:      add missing bounds test for minimal sizes
- psocket_snd:  initial basic conformance test
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add regression tests for PF_PACKET transmission using packet_snd.

The TPACKET ring interface has tests for transmission and reception.
This is an initial stab at the same for the send call based interface.

Packets are sent over loopback, then read twice. The entire packet is
read from another packet socket and compared. The packet is also
verified to arrive at a UDP socket for protocol conformance.

The test sends a packet over loopback, testing the following options
(not the full cross-product):

- SOCK_DGRAM
- SOCK_RAW
- vlan tag
- qdisc bypass
- bind() and sendto()
- virtio_net_hdr
- csum offload (NOT actual csum feature, ignored on loopback)
- gso

Besides these basic functionality tests, the test runs from a set
of bounds checks, positive and negative. Running over loopback, which
has dev->min_header_len, it cannot generate variable length hhlen.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Verify that udpgso can generate segments smaller than device mtu, down
to the extreme case of 1B gso_size.

Verify that irrespective of gso_size, udpgso restricts the number of
segments it will generate per call (UDP_MAX_SEGMENTS).
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing msg_zerocopy test takes additional protocol arguments.
Add a variant that takes no arguments and runs all supported variants.
Call this from kselftest.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the common free functions while return successfully.
Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2018-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.18

Hopefully the last pull request to 4.18 before the merge window.
Nothing major here, we have smaller new features and of course a lots
of fixes.

Major changes:

ath10k

* add memory dump support for QCA9888 and QCA99X0

* add support to configure channel dwell time

* support new DFS host confirmation feature in the firmware

ath

* update various regulatory mappings

wcn36xx

* various fixes to improve reliability

* add Factory Test Mode support

brmfmac

* add debugfs file for reading firmware capabilities

mwifiex

* support sysfs initiated device coredump
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>