Use dev_err instead of pr_err for more details.
Signed-off-by: NWolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Fix some whitespace issues while here.
Signed-off-by: NWolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Switch to WARN if no adapter name is given, otherwise we won't know who
missed to do that. Add error message if device registration fails.
Update error message for missing algo to match style of the others.
Signed-off-by: NWolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Move recovery init to a seperate function to let have
i2c_register_adapter() less lines and to avoid goto and a label.
Refactor string handling there for consistency and to save some bytes.
Signed-off-by: NWolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

On error, we should give idr back to the pool in any case.
Signed-off-by: NWolfram Sang <wsa-dev@sang-engineering.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Use devm_* APIs to simplify the code a bit.
This patch also fixes the memory leak when unload the module.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Tested-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

There is no build dependency for this driver, so enable COMPILE_TEST to get
better build coverage.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Tested-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Added ACPI support for the I2C controller present on Broadcom's
Vulcan ARM64 processor. ACPI ID used by the controller is BRCM9007.

Changed the xlp9xx_i2c_get_frequency() function to use
device_property_read_u32() API so that the "clock-frequency" value
can be read from _DSD in ACPI mode.
Signed-off-by: NTanmay Jagdale <tanmay.jagdale@broadcom.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This driver should be buildable with COMPILE_TEST so
add this to the dependency for it.
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

There is no code protecting i2c_dev to be freed after it is returned
from i2c_dev_get_by_minor() and using it to access the value which we
already have (minor) isn't safe really.

Avoid using it and get the adapter directly from 'minor'.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Tested-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

There are more than 7 busses, but only 7 are user visible. Update comment
accordingly.
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The i801 chip can handle the Host Notify feature since ICH 3 as mentioned
in http://www.intel.com/content/dam/doc/datasheet/82801ca-io-controller-hub-3-datasheet.pdf

Enable the functionality unconditionally and propagate the alert
on each notification.

With a T440s and a Synaptics touchpad that implements Host Notify, the
payload data is always 0x0000, so I am not sure if the device actually
sends the payload or if there is a problem regarding the implementation.
Tested-by: NAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

On a CRC error while using hardware-supported PEC, an additional
error bit is set in the auxiliary status register.  If this bit
isn't cleared, all subsequent operations will fail, essentially
hanging the controller.

The fix is simple: check, report, and clear the bit in
i801_check_post().  Also, in case the driver starts with the
hardware in that state, clear it in i801_check_pre() as well.
Signed-off-by: NEllen Wang <ellen@cumulusnetworks.com>
Tested-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.
Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
[wsa: remove two empty lines while here]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.
Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Simply sort header block alphabetically.

While here fix an indentation in one place and update a copyright line for
Intel.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This patch enables I2C controllers found on Intel Edison board.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

On some platforms, such as Intel Medfield, the I2C slave devices are enumerated
through SFI tables where bus numbering is expected to be defined in the OS.
Make the bus number allocation robust for such platforms.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

I believe i2c-designware-baytrail.c doesn't have strict dependency that
Intel SoC IOSF Sideband support must be always built-in in order to be
able to compile support for Intel Baytrail I2C bus sharing HW semaphore.

Redefine build dependencies so that CONFIG_IOSF_MBI=y is required only
when CONFIG_I2C_DESIGNWARE_PLATFORM is built-in.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: NDavid Box <david.e.box@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This allows applications to set the transfer timeout in 10ms increments via
ioctl I2C_TIMEOUT.
Signed-off-by: NWeifeng Voon <weifeng.voon@intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

qup_i2c_issue_read() derives the address from i2c_msg.
This called in the read path when I2C_M_RD flag is set.
Therefore, use the 8 bit address helper function.
Signed-off-by: NNaveen Kaje <nkaje@codeaurora.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Among the bus errors reported from the QUP_MASTER_STATUS register
only NACK is considered and transfer gets suspended, while
other errors are ignored. Correct this and suspend the transfer
for other errors as well. This avoids unnecessary 'timeouts' which
happens when waiting for events that would never happen when there
is already an error condition on the bus. Also the error handling
procedure should be the same for both NACK and other bus errors in
case of dma mode. So correct that as well.
Signed-off-by: NSricharan R <sricharan@codeaurora.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen,

------------[ cut here ]------------
kernel BUG at include/linux/scatterlist.h:140!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000
PC is at qup_sg_set_buf.isra.13+0x138/0x154
LR is at qup_sg_set_buf.isra.13+0x50/0x154
pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145
sp : ffffffc0368735c0
x29: ffffffc0368735c0 x28: ffffffc036873752
x27: ffffffc035233018 x26: ffffffc000c4e000
x25: 0000000000000000 x24: 0000000000000004
x23: 0000000000000000 x22: ffffffc035233668
x21: ffffff80004e3000 x20: ffffffc0352e0018
x19: 0000004000000000 x18: 0000000000000028
x17: 0000000000000004 x16: ffffffc0017a39c8
x15: 0000000000001cdf x14: ffffffc0019929d8
x13: ffffffc0352e0018 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000001
x9 : ffffffc0012b2d70 x8 : ffffff80004e3000
x7 : 0000000000000018 x6 : 0000000030000000
x5 : ffffffc00199f018 x4 : ffffffc035233018
x3 : 0000000000000004 x2 : 00000000c0000000
x1 : 0000000000000003 x0 : 0000000000000000

Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020)
Stack: (0xffffffc0368735c0 to 0xffffffc036874000)

sg_set_bug expects that the buf parameter passed in should be from
lowmem and a valid pageframe. This is not true for pages from
dma_alloc_coherent which can be carveouts, hence the check fails.
Change allocation of sg buffers from dma_coherent memory to kzalloc
to fix the issue. Note that now dma_map/unmap is used to make the
kzalloc'ed buffers coherent before passing it to the dmaengine.
Signed-off-by: NSricharan R <sricharan@codeaurora.org>
Reviewed-by: NAndy Gross <andy.gross@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Implement fast mode plus that allows bus speeds of up to 1MHz.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Tested-by: NCaesar Wang <wxt@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

- new method to caculate i2c timings for rk3399:
  There was an timing issue about "repeated start" time at the I2C
  controller of version0, controller appears to drop SDA at .875x (7/8)
  programmed clk high. On version 1 of the controller, the rule(.875x)
  isn't enough to meet tSU;STA
  requirements on 100k's Standard-mode. To resolve this issue,
  sda_update_config, start_setup_config and stop_setup_config for I2C
  timing information are added, new rules are designed to calculate
  the timing information at new v1.
- pclk and function clk are separated at rk3399
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Tested-by: NCaesar Wang <wxt@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
[wsa: fixed whitespace issue]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The i2c timing specs are really just constant data. There's no reason
to write code to init them, so move them out to structures. This not
only is a cleaner solution but it will reduce code duplication when we
introduce a new variant of rk3x_i2c_calc_divs() in a future patch.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Suggested-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Specifying the i2c SoC data in an array provides very little benefit and
gets unwieldly / confusing as the array grows since the next bit of code
needs to refer to elements in the array by their raw integral index.

Let's just create a single 'static const' structure for each SoC so that
we can refer to these structures by ID.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Suggested-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

rk3x_i2c_setup() gets called directly before rk3x_i2c_start(),
and the last thing in setup was to clean the IPD, so no reason
to do it at the beginning of start.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The "div_high" and "div_low" values are always used together.
Group them into a structure to make it easier to pass them
both around. This structure also provides a place for future
calculated timings.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Add kernel-doc documentation for the elements of the previously
undocumented struct rk3x_i2c.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

SMBus Host Notify allows a slave device to act as a master on a bus to
notify the host of an interrupt. On Intel chipsets, the functionality
is directly implemented in the firmware. We just need to export a
function to call .alert() on the proper device driver.

i2c_handle_smbus_host_notify() behaves like i2c_handle_smbus_alert().
When called, it schedules a task that will be able to sleep to go through
the list of devices attached to the adapter.

The current implementation allows one Host Notification to be scheduled
while an other is running.
Tested-by: NAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

.alert() is meant to be generic, but there is currently no way
for the device driver to know which protocol generated the alert.
Add a parameter in .alert() to help the device driver to understand
what is given in data.

This patch is required to have the support of SMBus Host Notify protocol
through .alert().
Tested-by: NAndrew Duggan <aduggan@synaptics.com>
For hwmon:
Acked-by: NGuenter Roeck <linux@roeck-us.net>
For IPMI:
Acked-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

osif_table is never modified, so declare it as const.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

David reported that the length for memset was incorrect (element sizes
were not taken into account). Then I saw that we are clearing kzalloced
memory, so we can simply drop this code.
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Reviewed-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The interrupt handling code makes it look like several status values
may be merged together before being processed, while this will never
happen. Change from bit-wise OR to simple assignment to make it more
obvious and avoid misunderstanding.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Some I2C devices have multiple addresses assigned, for example each address
corresponding to a different internal register map page of the device.
So far drivers which need support for this have handled this with a driver
specific and non-generic implementation, e.g. passing the additional address
via platform data.

This patch provides a new helper function called i2c_new_secondary_device()
which is intended to provide a generic way to get the secondary address
as well as instantiate a struct i2c_client for the secondary address.

The function expects a pointer to the primary i2c_client, a name
for the secondary address and an optional default address. The name is used
as a handle to specify which secondary address to get.

The default address is used as a fallback in case no secondary address
was explicitly specified. In case no secondary address and no default
address were specified the function returns NULL.

For now the function only supports look-up of the secondary address
from devicetree, but it can be extended in the future
to for example support board files and/or ACPI.
Signed-off-by: NJean-Michel Hautbois <jean-michel.hautbois@veo-labs.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The uvc compat ioctl implementation seems to have copied user data
for no good reason.  Remove a bunch of copies.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>

The current code goes through a lot of indirection just to call a
known handler.  Simplify it: just call the handlers directly.

Cc: stable@vger.kernel.org
Signed-off-by: NAndy Lutomirski <luto@kernel.org>

The device emulation may send segCnt of 1 for LRO packets.
Signed-off-by: NShrikrishna Khare <skhare@vmware.com>
Signed-off-by: NJin Heo <heoj@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dwmac4_set_umac_addr() takes a struct mac_device_info as
the first parameter, but is being passed a ioaddr instead from
dwmac4_set_filter(). Fix the warning/bug by changing the first
parameter.

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    expected struct mac_device_info *hw
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    got void [noderef] <asn:2>*ioaddr

Note, only compile tested this as do not have any
hardware with it in.
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>