- 19 10月, 2007 31 次提交
-
-
Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it. While at it: * In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers to use it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead of hwif->err_stops_fifo. As a side-effect this change fixes hwif->err_stops_fifo not being restored by ide_hwif_restore(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add DECLARE_ICH_DEV() macro. While at it: * Add init_hwif_ich() (->init_hwif method) for ICH controllers. * Rename init_chipset_piix() to init_chipset_ich() and use it only for ICH controllers. * Remove no longer needed piix_is_ichx() helper. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* No need to disable UDMA in ->init_hwif method for ATP850UF (and since we now always tune PIO it will be disabled by ->set_pio_mode calls anyway). * Bump driver version. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Now that all users were fixed we can safely remove it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Merge init_setup_{svwks,csb6}() into svwks_init_one(). While at it: * Remove redundant dev->device checks. * Operate on a local copy of serverworks_chipsets[] entry. * Use pci_resource_start(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Split off pdc202ata4_fixup_irq() helper from init_setup_pdc202ata4(). * Merge init_setup_{pdc202ata4,pdc20265,pdc202xx}() into pdc202xx_init_one(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Split off pdc20270_get_dev2() helper from init_setup_pdc20270(). * Merge init_setup_{pdcnew,pdc20270,pdc20276}() into pdc202new_init_one(). While at it: * Change KERN_ level of interrupt fixup message from KERN_WARNING to KERN_INFO. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Split off hpt{374,371,366}_init() helper from init_setup_hpt{374,371,366}(). * Merge init_setup_{374,372n,371,372a,302,366}() into hpt366_init_one(). While at it: * Use "HPT36x" name for HPT366/HPT368 chipsets. * Add .chip_name to struct hpt_info and use it to set set d->name. * Convert .max_ultra in struct hpt_info to .udma_mask and use it to set d->udma_mask. * Fix hpt302 to use HPT302_ALLOW_ATA133_6 define. * Change HPT366/HPT374 interrupt fixup message from KERN_WARNING to KERN_INFO. * Use the second hpt366_chipsets[] entry for HPT37x chipsets using HPT36x PCI device ID and fix .enablebits/.host_flags for HPT36x hpt366_chipsets[] entry. * Bump driver version. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Merge init_setup_{cmd64x,cmd646}() into cmd64x_init_one(). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Merge init_setup_{aec62xx,aec6x80}() into aec62xx_init_one(). While at it: * Use id->driver_data instead of dev->device. * Use ATA_UDMA6 define. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
v2: - bump host driver versions (as suggested by Sergei) - use I/O ops directly in drivers/ide/setup-pci.c Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Some places were using PCI_CLASS_REVISION instead of PCI_REVISION_ID so they were not converted by commit 44c10138. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Auke Kok 提交于
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Auke Kok 提交于
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t. * Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif method may still override them). * Convert IDE PCI host drivers to use ide_pci_device_t DMA masks. While at it: * Use ATA_{UDMA,MWDMA,SWDMA}* defines. * hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345. * serverworks.c: fix DMA masks being set before checking DMA base. v2: * Add missing masks to DECLARE_GENERIC_PCI_DEV() macro. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Documentation doesn't mention SWDMA and moreover all timings used for SWDMA modes were over-clocked when compared to ATA spec. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif->no_lba48[_dma] and then remove no longer needed hwif->no_lba48[_dma]. As a side-effect this change fixes hwif->no_lba48_dma not being restored by ide_hwif_restore(). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag. * Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base() and use d->name instead of hwif->cds->name. * Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma. This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts. v2: * It is wrong to check simplex bits on CS5510/CS5520 as v1 did. (Noticed by Alan). Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags. Convert all host drivers using ide_pci_device_t to use these flags instead of d->autodma and then remove no longer needed d->autodma. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define. Convert all host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD} instead of d->bootable and then remove no longer needed d->bootable. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which don't support ATAPI DMA. Then remove no longer needed hwif->atapi_dma. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver and use it to cleanup generic_chipsets[]. * Remove dead/obsolete code while at it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Benjamin Herrenschmidt 提交于
The cs5535 uses an incorrect construct to access the other drive of a pair, causing it to access beyond an array boundary on the secondary interface. This fixes it by using the new ide_get_paired_drive() helper instead. Bart: patch description fixes Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@osdl.org> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Benjamin Herrenschmidt 提交于
The siimage uses an incorrect construct to access the other drive of a pair, causing it to access beyond an array boundary on the secondary interface. This fixes it by using the new ide_get_paired_drive() helper instead. Bart: patch description fixes Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@osdl.org> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Benjamin Herrenschmidt 提交于
This adds a helper to get to the "other" drive on a pair connected to a given hwif. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@osdl.org> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 18 10月, 2007 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix non-numa build
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: remove sysctl 9p: fix bad kconfig cross-dependency 9p: soften invalidation in loose_mode 9p: attach-per-user 9p: rename uid and gid parameters 9p: define session flags 9p: Make transports dynamic
-
由 Andrew Morton 提交于
arch/ia64/kernel/machine_kexec.c: In function `arch_crash_save_vmcoreinfo': arch/ia64/kernel/machine_kexec.c:131: error: `pgdat_list' undeclared (first use in this function) arch/ia64/kernel/machine_kexec.c:131: error: (Each undeclared identifier is reported only once arch/ia64/kernel/machine_kexec.c:131: error: for each function it appears in.) arch/ia64/kernel/machine_kexec.c:134: error: `node_memblk' undeclared (first use in this function) arch/ia64/kernel/machine_kexec.c:135: error: `NR_NODE_MEMBLKS' undeclared (first use in this function) arch/ia64/kernel/machine_kexec.c:136: error: invalid application of `sizeof' to incomplete type `node_memblk_s' arch/ia64/kernel/machine_kexec.c:137: error: dereferencing pointer to incomplete type arch/ia64/kernel/machine_kexec.c:138: error: dereferencing pointer to incomplete type make[1]: *** [arch/ia64/kernel/machine_kexec.o] Error 1 Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: net: libertas sdio driver mmc: at91_mci: cleanup: use MCI_ERRORS mmc: possible leak in mmc_read_ext_csd
-
由 Pierre Ossman 提交于
Add driver for Marvell's Libertas 8385 and 8686 wifi chips. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Acked-by: NDan Williams <dcbw@redhat.com>
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86由 Linus Torvalds 提交于
* ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86: (114 commits) x86: delete vsyscall files during make clean kbuild: fix typo SRCARCH in find_sources x86: fix kernel rebuild due to vsyscall fallout .gitignore update for x86 arch x86: unify include/asm/debugreg_32/64.h x86: unify include/asm/unwind_32/64.h x86: unify include/asm/types_32/64.h x86: unify include/asm/tlb_32/64.h x86: unify include/asm/siginfo_32/64.h x86: unify include/asm/bug_32/64.h x86: unify include/asm/mman_32/64.h x86: unify include/asm/agp_32/64.h x86: unify include/asm/kdebug_32/64.h x86: unify include/asm/ioctls_32/64.h x86: unify include/asm/floppy_32/64.h x86: apply missing DMA/OOM prevention to floppy_32.h x86: unify include/asm/cache_32/64.h x86: unify include/asm/cache_32/64.h x86: unify include/asm/dmi_32/64.h x86: unify include/asm/delay_32/64.h ...
-
由 Sam Ravnborg 提交于
make clean failed to delete a few files in x86/kernel. This is because kbuild does not see the correct/full kernel/Makefile. As a workaround until the Makefiles are merged specify the files to be deleted in the common Makefile. Reported by Mike Galbraith <efault@gmx.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
otherwise get the two copy file list in SRCARCH for cscope: C symbol: start_kernel File Function Line 0 proto.h <global> 11 extern void start_kernel(void ); 1 start_kernel.h <global> 10 extern asmlinkage void __init start_kernel(void ); 2 head32.c i386_start_kernel 37 start_kernel(); 3 head32.c i386_start_kernel 37 start_kernel(); 4 head64.c x86_64_start_kernel 85 start_kernel(); 5 head64.c x86_64_start_kernel 85 start_kernel(); 6 head_32.S options 199 cmpb $0,%cl #the first CPU calls start_kernel 7 head_32.S options 199 cmpb $0,%cl #the first CPU calls start_kernel 8 enlighten.c xen_start_kernel 1145 start_kernel(); 9 enlighten.c xen_start_kernel 1145 start_kernel(); a lguest.c lguest_init 1095 start_kernel(); b main.c start_kernel 513 asmlinkage void __init start_kernel(void ) after the patch: C symbol: start_kernel File Function Line 0 proto.h <global> 11 extern void start_kernel(void ); 1 start_kernel.h <global> 10 extern asmlinkage void __init start_kernel(void ); 2 head32.c i386_start_kernel 37 start_kernel(); 3 head64.c x86_64_start_kernel 85 start_kernel(); 4 head_32.S options 199 cmpb $0,%cl #the first CPU calls start_kernel 5 enlighten.c xen_start_kernel 1145 start_kernel(); 6 lguest.c lguest_init 1095 start_kernel(); 7 main.c start_kernel 513 asmlinkage void __init start_kernel(void ) Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Eric Van Hensbergen 提交于
A sysctl method was added to enable and disable debugging levels. After further review, it was decided that there are better approaches to doing this and the sysctl methodology isn't really desirable. This patch removes the sysctl code from 9p. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-