* Add 'struct request request_sense_rq' to struct ide_{floppy,tape}_obj
  and switch ide*_retry_pc() to use it (there can be only one REQUEST SENSE
  request active for a given device).

* Remove no longer needed ide*_next_rq_storage(), rq_stack[]
  and rq_stack_index.

* DBG_PCRQ_STACK -> DBG_PC_STACK

* Update comments for IDE*_PC_STACK and idetape_queue_pc_{head,tail}().

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Avoid probing the io-ports in case an IDE PCI controller is present and it
uses the legacy iobases. If we still want to enforce the probing, we do

ide_generic.probe_mask=0x3f

on the kernel command line. The iobase checking code is
adapted from drivers/ata/pata_legacy.c after converting hex
pci ids into their corresponding macros in <linux/pci_ids.h>.

Also, check only BAR0/2 resources since those are guaranteed
by the workaround in drivers/pci/probe.c:pci_setup_device().
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
[bart: trivial printk() fixups]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use hwif->sg_table for pio transfers instead of fumbling
with block layer internals in the driver. Also, make debug
statements more informative in .._do_request() while at it.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
[bart: fixup pc->b_count in idefloppy_blockpc_cmd()]
[bart: add missing include (noticed by Stephen Rothwell)]
[bart: map hwif->sg_{table,nents} on pc->{sg,sg_cnt} (multi-IRQs-per-sg fix)]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

idetape_init_rq() is only used in idetape_queue_pc_head()
so inline it there.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out IDEFLOPPY_IOCTL_FORMAT_* ioctls handling from
  idefloppy_ioctl() to ide_floppy_format_ioctl().

While at it:

* Pass 'drive' instead of 'floppy' to ide_floppy_format_unit().

* idefloppy_get_format_progress() -> ide_floppy_get_format_progress()

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_check_atapi_device() to ide-atapi.c and convert
  ide-{floppy,tape}.c to use it instead of ide*_identify_device().

While at it:

* Add DRV_NAME defines to ide-{floppy,tape}.c.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ioctls handling to ide-ioctls.c
  (except HDIO_DRIVE_TASKFILE for now).

* Make ide_{cmd,task}() static.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Fix intendation for the main 'switch ()'.

* 'switch ()' -> 'if ()' for HDIO_DRIVE_TASKFILE case.

* Move HDIO_SET_NICE case under HDIO_GET_NICE one.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add struct ide_ioctl_devset representing ioctl device setting.

* Add ide_setting_ioctl() helper for matching given ioctl
  and its parameters against table of ioctl device settings.

* Convert ide_setting_ioctl() and idedisk_ioctl() to use
  ide_setting_ioctl().

* Un-export ide_setting_mtx.

While at it:

* {get,set}_lba_addressing() -> {get,set}_addressing()

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It is always set to BUSSTATE_ON.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Keep pointer to ->init_chipset method also in
  struct ide_host and set it in ide_host_alloc_all().

* Add ide_pci_suspend() and ide_pci_resume() helpers
  (default ->suspend and ->resume implementations).

* ->init_chipset can no longer be marked __devinit.

* Add proper PCI PM support to IDE PCI host drivers
  (rz1000.c and tc86c001.c are skipped for now since
  they need to be converted from using ->init_hwif
  to use ->init_chipset instead).

v2:
* Cleanup CONFIG_PM #ifdef-s per akpm's suggestion.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out disabling of "fast interrupt" prediction from
  init_hwif_hpt366() to hpt3xx_disable_fast_irq() helper.

* Use hpt3xx_disable_fast_irq() in ->init_chipset instead of
  ->init_hwif method.

  This is a preparation for adding proper PCI PM support.

While at it:

* Cache chip type in chip_type variable in hpt3xx_disable_fast_irq().

There should be no functional changes caused by this patch.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Rename lba_capacity_is_ok() to ata_id_is_lba_capacity_ok()
and move it to <linux/ata.h> (remove needless parens while at it).

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Rename ide_id_to_hd_driveid() to ata_id_to_hd_driveid()
and move it to <linux/ata.h>.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use ata_id_is_cfa() in do_identify() instead of open-coding
check for CompactFlash devices (the inline helper also takes
care of detecting CFs advertising themselves as ATA disks).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ata_id_flush_ext_enabled() inline helper to <linux/ata.h>.

* ide_id_has_flush_cache_ext() -> ata_id_flush_ext_enabled()

  The latter one also checks if the command is marked as
  supported in word 83 and validity of words 83 & 86.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ata_id_flush_enabled() inline helper to <linux/ata.h>.

* ide_id_has_flush_cache() -> ata_id_flush_enabled()

  The latter one also checks if the command is marked as
  supported in word 83 and validity of words 83 & 86.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All devices supporting CACHE FLUSH EXT command should also support
CACHE FLUSH command so it is sufficient to check only for CACHE FLUSH
in ide_id_has_flush_cache().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ata_id_lba48_enabled() inline helper to <linux/ata.h>.

* idedisk_supports_lba48() -> ata_id_lba48_enabled()

  The latter one also checks validity of words 83 & 86.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use optimized ATA version check from Sergei in ata_id_is_sata().

* ide_dev_is_sata() -> ata_id_is_sata()

Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove (id[ATA_ID_FIELD_VALID] & 2) check from ide_dev_has_iordy()
  (it is for validity of words 64-70, IORDY is in word 49).

* ide_dev_has_iordy() -> ata_id_has_iordy()

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out HDIO_{GET,SET}_NICE ioctl handling from
generic_ide_ioctl() to ide_{get,set}_nice_ioctl().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use drive->media and drive->scsi to check if ->dsc_overlap
  can be set by HDIO_SET_NICE ioctl in generic_ide_ioctl().

* Remove unused ->supports_dsc_overlap field from ide_driver_t.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out the common code from check_prefetch()
and set_prefetch_mode() to __set_prefetch_mode().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Just use SECTOR_SIZE instead.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add struct ide_devset, S_* flags, *DEVSET() & ide*_devset_*() macros.

* Add 'const struct ide_devset **settings' to ide_driver_t.

* Use 'const struct ide_devset **settings' in ide_drive_t instead of
  'struct ide_settings_s *settings'.  Then convert core code and device
  drivers to use struct ide_devset and co.:

  - device settings are no longer allocated dynamically for each device
    but instead there is an unique struct ide_devset instance per setting

  - device driver keeps the pointer to the table of pointers to its
    settings in ide_driver_t.settings

  - generic settings are kept in ide_generic_setting[]

  - ide_proc_[un]register_driver(), ide_find_setting_by_name(),
    ide_{read,write}_setting() and proc_ide_{read,write}_settings()
    are updated accordingly

  - ide*_add_settings() are removed

* Remove no longer used __ide_add_setting(), ide_add_setting(),
  __ide_remove_setting() and auto_remove_settings().

* Remove no longer used TYPE_*, SETTING_*, ide_procset_t
  and ide_settings_t.

* ->keep_settings, ->using_dma, ->unmask, ->noflush, ->dsc_overlap,
  ->nice1, ->addressing, ->wcache and ->nowerr ide_drive_t fields
  can now be bitfield flags.

While at it:

* Rename ide_find_setting_by_name() to ide_find_setting().

* Rename write_wcache() to set_wcache().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

After rework settings will be no longer created dynamically
for each device so we need to make some fixups first.

* Use set_[ksettings,unmaskirq]() as a set function for
  ["keepsettings","unmaskirq"] setting.

* Allow writes to ["io_32bit","unmaskirq"] settings also when
  drive->no_[io_32bit,unmask] is set (this is checked later inside
  set_[io_32bit,unmaskirq]() anywyay and keeps consistency with
  the corresponding HDIO_SET_[32BIT,UNMASKINTR] ioctls).

* Use max possible multi sectors value (16) as an allowed max for
  "multcount" setting.  set_multcount() set function checks against
  device's max possbile value anyway and it makes the proc setting
  consistent with the corresponding HDIO_SET_MULTCOUNT ioctl.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Call ide_proc_register_driver() in ide*_setup() (just before
ide*_add_settings() call) instead of in ->probe method.

Despite being basically a preparation for /proc/ide/hd*/settings
rework this is a nice cleanup in itself.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Include <linux/ata.h> directly in <linux/ide.h>
  instead of through <linux/hdreg.h>.

* Include <linux/hdreg.h> only when needed.

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use multi PIO by default when available and remove no longer
needed CONFIG_IDEDISK_MULTI_MODE (it should be safe nowadays,
despite to what help entry has been saying).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Change ide_get_paired_drive() to return NULL if peer device
  is not present and update all users accordingly.

While at it:

* ide_get_paired_drive() -> ide_get_pair_dev()

* Use ide_get_pair_dev() in cs5530.c, sc1200.c and via82cxxx.c.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove needless drive->present checks from ->probe methods
(device model takes care of that).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

They just obfuscate the code.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

init_irq() is now called only during initial host registration
so these BUG_ON()-s are no loner needed (+ the last one was done
too late anyway).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make ide_busy_sleep() take timeout value as a parameter
  and also allow use of AltStatus Register if requested with
  altstatus parameter.  Update existing users accordingly.

* Convert ide_driveid_update() and actual_try_to_identify()
  to use ide_busy_sleep().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix EXABYTENEST handling in probe_for_drive() (so drive->present
is checked for "nested" device) and cleanup enable_nest().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>