All other warnings use "cmd(0x%08x)" and this is the only one with
"cmd(%d)".  (below comes from my userspace debug program, but not
automount daemon)

[ 1139.905676] autofs4:pid:1640:check_dev_ioctl_version: ioctl control interface version mismatch: kernel(1.0), user(0.0), cmd(-1072131215)

Link: http://lkml.kernel.org/r/20160812024851.12352.75458.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No functional changes, based on the following justification.

1. Make the code more consistent using the ioctl vector _ioctls[],
   rather than assigning NULL only for this ioctl command.
2. Remove goto done; for better maintainability in the long run.
3. The existing code is based on the fact that validate_dev_ioctl()
   sets ioctl version for any command, but AUTOFS_DEV_IOCTL_VERSION_CMD
   should explicitly set it regardless of the default behavior.

Link: http://lkml.kernel.org/r/20160812024846.12352.9885.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The count of miscellaneous device ioctls in fs/autofs4/autofs_i.h is wrong.

The number of ioctls is the difference between AUTOFS_DEV_IOCTL_VERSION_CMD
and AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD (14) not the difference between
AUTOFS_IOC_COUNT and 11 (21).

[kusumi.tomohiro@gmail.com: fix typo that made the count macro negative]
 Link: http://lkml.kernel.org/r/20160831033420.9910.16809.stgit@pluto.themaw.net
Link: http://lkml.kernel.org/r/20160812024841.12352.11975.stgit@pluto.themaw.netSigned-off-by: NIan Kent <raven@themaw.net>
Cc: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This isn't a return value, so change the message to indicate the status is
the result of may_umount().

(or locate pr_debug() after put_user() with the same message)

Link: http://lkml.kernel.org/r/20160812024836.12352.74628.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sync with changes made by commit 730c9eec ("autofs4: improve
parameter usage") which introduced an union for various ioctl commands
instead of having statically named arg1,2.

This commit simply replaces arg1,2 with the corresponding fields without
changing semantics.

Link: http://lkml.kernel.org/r/20160812024831.12352.24667.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The explanation on how ioctl handles devid seems incorrect.  Userspace who
calls this ioctl has no input regarding devid, and ioctl implementation
retrieves devid via superblock.

Link: http://lkml.kernel.org/r/20160812024825.12352.13486.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This macro was never used by neither kernel nor userspace, and also
doesn't represent "devid length" in bytes.  (unless it was added to mean
something else).

Link: http://lkml.kernel.org/r/20160812024820.12352.21210.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Returning -ENOTTY here fails to free dynamically allocated param.

Link: http://lkml.kernel.org/r/20160812024815.12352.69153.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These two were left from commit aa55ddf3 ("autofs4: remove unused
ioctls") which removed unused ioctls.

Link: http://lkml.kernel.org/r/20160812024810.12352.96377.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <ikent@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kfree dentry data allocated by autofs4_new_ino() with autofs4_free_ino()
instead of raw kfree.  (since we have the interface to free autofs_info*)

This patch was modified to remove the need to set the dentry info field to
NULL dew to a change in the previous patch.

Link: http://lkml.kernel.org/r/20160812024805.12352.43650.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The inode allocation failure case in autofs4_dir_symlink() frees the
autofs dentry info of the dentry without setting ->d_fsdata to NULL.

That could lead to a double free so just get rid of the free and leave it
to ->d_release().

Link: http://lkml.kernel.org/r/20160812024759.12352.10653.stgit@pluto.themaw.netSigned-off-by: NIan Kent <raven@themaw.net>
Cc: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's invalid if the given mode is neither dir nor link, so warn on else
case.

Link: http://lkml.kernel.org/r/20160812024754.12352.8536.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Somewhere along the line the error handling gotos have become incorrect.

Link: http://lkml.kernel.org/r/20160812024749.12352.15100.stgit@pluto.themaw.netSigned-off-by: NIan Kent <raven@themaw.net>
Cc: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch does what the below comment says.  It could be and it's
considered better to do this first before various functions get called
during initialization.

/* Couldn't this be tested earlier? */

Link: http://lkml.kernel.org/r/20160812024744.12352.43075.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

autofs4_kill_sb() doesn't need to be declared as extern, and no other
functions in .h are explicitly declared as extern.

Link: http://lkml.kernel.org/r/20160812024739.12352.99354.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

plus minor whitespace fixes.

Link: http://lkml.kernel.org/r/20160812024734.12352.17122.stgit@pluto.themaw.netSigned-off-by: NTomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

asm-generic headers are generic implementations for architecture specific
code and should not be included by common code.  Thus use the asm/ version
of sections.h to get at the linker sections.

Link: http://lkml.kernel.org/r/1473602302-6208-1-git-send-email-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function calls with octal permissions commonly span multiple lines.
The current test is line oriented and fails to find some matches.

Make the test use the $stat variable instead of the $line variable to span
multiple lines.

Also add a few functions to the known functions with permissions list.

Move the SYMBOLIC_PERMS test to a separate section to find all the S_<FOO>
permissions in any form not just those that have specific function names.

This can now find and fix permissions uses like:
     .mode = S_<FOO> | S_<BAR>;

Link: http://lkml.kernel.org/r/b51bab60530912aae4ac420119d465c5b206f19f.1475030406.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Tested-by: NRamiro Oliveira <roliveir@synopsys.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Function definitions without identifiers like
	 int foo(int)
are not preferred.  Emit a warning when they occur.

Link: http://lkml.kernel.org/r/94fe6378504745991b650f48fc92bb4648f25706.1474925354.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible for a multiple line macro definition to have a false positive
report when an argument is used on a line after a continuation \.

This line might have a leading '+' as the initial character that could be
confused by checkpatch as an operator.

Avoid the leading character on multiple line macro definitions.

Link: http://lkml.kernel.org/r/60229d13399f9b6509db5a32e30d4c16951a60cd.1473836073.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a test for macro arguents that have a non-comma leading or trailing
operator where the argument isn't parenthesized to avoid possible precedence
issues.

Link: http://lkml.kernel.org/r/47715508972f8d786f435e583ff881dbeee3a114.1473745855.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a macro argument is used multiple times in the macro definition, the
macro argument may have an unexpected side-effect.

Add a test (MACRO_ARG_REUSE) for that condition which is only
emitted with command-line option --strict.

Link: http://lkml.kernel.org/r/b6d67a87cafcafd15499e91780dc63b15dec0aa0.1473744906.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

An "uninitialized value" is emitted when a block comment starts on
the same line as a statement.

Fix this and make the test use a little fewer cpu cycles too.

Link: http://lkml.kernel.org/r/3c9993320c2182d37f53ac540878cfef59c3f62d.1473365956.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Reported-by: NCharlemagne Lasse <charlemagnelasse@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adding -f to the get_maintainer.pl invocation means git isn't invoked
by get_maintainer.pl for known filenames.

This reduces the overall time to run checkpatch.

Link: http://lkml.kernel.org/r/22991e3a295aeb399b43af0478b6e5809106ccee.1472684066.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using const is generally a good idea.

Julia Lawall has created a list of always const and almost always const
structs in the kernel sources.

Link: https://lkml.org/lkml/2016/8/28/95

Add the most frequently used (> 50 cases) that are almost always or
always const.

Link: http://lkml.kernel.org/r/1e16020f8027654db0095bbfbcc11da51025365c.1472664220.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make it easier to add new structs that should be const.

Link: http://lkml.kernel.org/r/e5a8da43e7c11525bafbda1ca69a8323614dd942.1472664220.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

< sigh > Comment these tests out.

These are just too enticing to people that don't verify that
both source and dest addresses really must be __aligned(2).

It helps make Dan Carpenter happy too.

Link: http://lkml.kernel.org/r/dc32ec66d24647f4cdf824c8dfbbc59aa7ce7b7d.1472665676.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg <gvrose8192@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Warn when block comments are not aligned on the *

/*
 * block comment, no warning
 */

/*
  * block comment, emit warning
  */

Link: http://lkml.kernel.org/r/edb57bd330adfe024b95ec2a807d4aa7f0c8b112.1472261299.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Reported-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

S_<FOO> uses should be avoided where octal is more intelligible.

Linus didst say:

: It's *much* easier to parse and understand the octal numbers, while the
: symbolic macro names are just random line noise and hard as hell to
: understand.  You really have to think about it.
:
: So we should rather go the other way: convert existing bad symbolic
: permission bit macro use to just use the octal numbers.
:
: The symbolic names are good for the *other* bits (ie sticky bit, and the
: inode mode _type_ numbers etc), but for the permission bits, the symbolic
: names are just insane crap.  Nobody sane should ever use them.  Not in the
: kernel, not in user space.
(http://lkml.kernel.org/r/CA+55aFw5v23T-zvDZp-MmD_EYxF8WbafwwB59934FV7g21uMGQ@mail.gmail.com)

Link: http://lkml.kernel.org/r/7232ef011d05a92f4caa86a5e9830d87966a2eaf.1470180926.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use get_maintainer to check the status of individual files.  If
"obsolete", suggest leaving the files alone.

Link: http://lkml.kernel.org/r/7ceaa510dc9d2df05ec4b456baed7bb1415550b3.1471889575.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: SF Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Today there are platforms with many CPUs (up to 4K).  Trying to boot only
part of the CPUs may result in too long string.

For example lets take NPS platform that is part of arch/arc.  This
platform have SMP system with 256 cores each with 16 HW threads (SMT
machine) where HW thread appears as CPU to the kernel.  In this example
there is total of 4K CPUs.  When one tries to boot only part of the HW
threads from each core the string representing the map may be long...  For
example if for sake of performance we decided to boot only first half of
HW threads of each core the map will look like:
0-7,16-23,32-39,...,4080-4087

This patch introduce new syntax to accommodate with such use case.  I
added an optional postfix to a range of CPUs which will choose according
to given modulo the desired range of reminders i.e.:

    <cpus range>:sed_size/group_size

For example, above map can be described in new syntax like this:
0-4095:8/16

Note that this patch is backward compatible with current syntax.

[akpm@linux-foundation.org: rework documentation]
Link: http://lkml.kernel.org/r/1473579629-4283-1-git-send-email-noamca@mellanox.comSigned-off-by: NNoam Camus <noamca@mellanox.com>
Cc: David Decotigny <decot@googlers.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: Pan Xinhui <xinhui@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Set "overflow" bit upon encountering it instead of postponing to the end
of the conversion. Somehow gcc unwedges itself and generates better code:

	$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux
	_parse_integer                      177     139     -38

Inspired by patch from Zhaoxiu Zeng.

Link: http://lkml.kernel.org/r/20160826221920.GA1909@p183.telecom.bySigned-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make isdigit into a simple range checking inline function:

	return '0' <= c && c <= '9';

This code is 1 branch, not 2 because any reasonable compiler can
optimize this code into SUB+CMP, so the code

	while (isdigit((c = *s++)))
		...

remains 1 branch per iteration HOWEVER it suddenly doesn't do table
lookup priming cacheline nobody cares about.

Link: http://lkml.kernel.org/r/20160826190047.GA12536@p183.telecom.bySigned-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The strncpy_from_user() accessor is effectively a copy_from_user()
specialised to copy strings, terminating early at a NUL byte if possible.
In other respects it is identical, and can be used to copy an arbitrarily
large buffer from userspace into the kernel.  Conceptually, it exposes a
similar attack surface.

As with copy_from_user(), we check the destination range when the kernel
is built with KASAN, but unlike copy_from_user() we do not check the
destination buffer when using HARDENED_USERCOPY.  As strncpy_from_user()
calls get_user() in a loop, we must call check_object_size() explicitly.

This patch adds this instrumentation to strncpy_from_user(), per the same
rationale as with the regular copy_from_user().  In the absence of
hardened usercopy this will have no impact as the instrumentation expands
to an empty static inline function.

Link: http://lkml.kernel.org/r/1472221903-31181-1-git-send-email-mark.rutland@arm.comSigned-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pthread_mutex_t in regression1.c wasn't being initialized properly.

Link: http://lkml.kernel.org/r/20160815194237.25967-4-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are four cases I can see where we could end up with a NULL 'slot' in
radix_tree_next_slot().  This unit test exercises all four of them, making
sure that if in the future we have an unsafe path through
radix_tree_next_slot(), we'll catch it.

Here are details on the four cases:

1) radix_tree_iter_retry() via a non-tagged iteration like
radix_tree_for_each_slot().  In this case we currently aren't seeing a bug
because radix_tree_iter_retry() sets

    iter->next_index = iter->index;

which means that in in the else case in radix_tree_next_slot(), 'count' is
zero, so we skip over the while() loop and effectively just return NULL
without ever dereferencing 'slot'.

2) radix_tree_iter_retry() via tagged iteration like
radix_tree_for_each_tagged().  This case was giving us NULL pointer
dereferences in testing, and was fixed with this commit:

commit 3cb9185c ("radix-tree: fix radix_tree_iter_retry() for tagged
iterators.")

This fix doesn't explicitly check for 'slot' being NULL, though, it works
around the NULL pointer dereference by instead zeroing iter->tags in
radix_tree_iter_retry(), which makes us bail out of the if() case in
radix_tree_next_slot() before we dereference 'slot'.

3) radix_tree_iter_next() via via a non-tagged iteration like
radix_tree_for_each_slot().  This currently happens in shmem_tag_pins()
and shmem_partial_swap_usage().

As with non-tagged iteration, 'count' in the else case of
radix_tree_next_slot() is zero, so we skip over the while() loop and
effectively just return NULL without ever dereferencing 'slot'.

4) radix_tree_iter_next() via tagged iteration like
radix_tree_for_each_tagged().  This happens in shmem_wait_for_pins().

radix_tree_iter_next() zeros out iter->tags, so we end up exiting
radix_tree_next_slot() here:

    if (flags & RADIX_TREE_ITER_TAGGED) {
	    void *canon = slot;

	    iter->tags >>= 1;
	    if (unlikely(!iter->tags))
		    return NULL;

Link: http://lkml.kernel.org/r/20160815194237.25967-3-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are four cases I can see where we could end up with a NULL 'slot' in
radix_tree_next_slot().  Yet radix_tree_next_slot() never actually checks
whether 'slot' is NULL.  It just happens that for the cases where 'slot'
is NULL, some other combination of factors prevents us from dereferencing
it.

It would be very easy for someone to unwittingly change one of these
factors without realizing that we are implicitly depending on it to save
us from a NULL pointer dereference.

Add a comment documenting the things that allow 'slot' to be safely passed
as NULL to radix_tree_next_slot().

Here are details on the four cases:

1) radix_tree_iter_retry() via a non-tagged iteration like
radix_tree_for_each_slot().  In this case we currently aren't seeing a bug
because radix_tree_iter_retry() sets

	iter->next_index = iter->index;

which means that in in the else case in radix_tree_next_slot(), 'count' is
zero, so we skip over the while() loop and effectively just return NULL
without ever dereferencing 'slot'.

2) radix_tree_iter_retry() via tagged iteration like
radix_tree_for_each_tagged().  This case was giving us NULL pointer
dereferences in testing, and was fixed with this commit:

commit 3cb9185c ("radix-tree: fix radix_tree_iter_retry() for tagged
iterators.")

This fix doesn't explicitly check for 'slot' being NULL, though, it works
around the NULL pointer dereference by instead zeroing iter->tags in
radix_tree_iter_retry(), which makes us bail out of the if() case in
radix_tree_next_slot() before we dereference 'slot'.

3) radix_tree_iter_next() via via a non-tagged iteration like
radix_tree_for_each_slot().  This currently happens in shmem_tag_pins()
and shmem_partial_swap_usage().

As with non-tagged iteration, 'count' in the else case of
radix_tree_next_slot() is zero, so we skip over the while() loop and
effectively just return NULL without ever dereferencing 'slot'.

4) radix_tree_iter_next() via tagged iteration like
radix_tree_for_each_tagged().  This happens in shmem_wait_for_pins().

radix_tree_iter_next() zeros out iter->tags, so we end up exiting
radix_tree_next_slot() here:

	if (flags & RADIX_TREE_ITER_TAGGED) {
		void *canon = slot;

		iter->tags >>= 1;
		if (unlikely(!iter->tags))
			return NULL;

Link: http://lkml.kernel.org/r/20160815194237.25967-2-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The select(2) syscall performs a kmalloc(size, GFP_KERNEL) where size grows
with the number of fds passed. We had a customer report page allocation
failures of order-4 for this allocation. This is a costly order, so it might
easily fail, as the VM expects such allocation to have a lower-order fallback.

Such trivial fallback is vmalloc(), as the memory doesn't have to be physically
contiguous and the allocation is temporary for the duration of the syscall
only. There were some concerns, whether this would have negative impact on the
system by exposing vmalloc() to userspace. Although an excessive use of vmalloc
can cause some system wide performance issues - TLB flushes etc. - a large
order allocation is not for free either and an excessive reclaim/compaction can
have a similar effect. Also note that the size is effectively limited by
RLIMIT_NOFILE which defaults to 1024 on the systems I checked. That means the
bitmaps will fit well within single page and thus the vmalloc() fallback could
be only excercised for processes where root allows a higher limit.

Note that the poll(2) syscall seems to use a linked list of order-0 pages, so
it doesn't need this kind of fallback.

[eric.dumazet@gmail.com: fix failure path logic]
[akpm@linux-foundation.org: use proper type for size]
Link: http://lkml.kernel.org/r/20160927084536.5923-1-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After much discussion, it seems that the fallocate feature flag
FALLOC_FL_ZERO_RANGE maps nicely to SCSI WRITE SAME; and the feature
FALLOC_FL_PUNCH_HOLE maps nicely to the devices that have been whitelisted
for zeroing SCSI UNMAP.  Punch still requires that FALLOC_FL_KEEP_SIZE is
set.  A length that goes past the end of the device will be clamped to the
device size if KEEP_SIZE is set; or will return -EINVAL if not.  Both
start and length must be aligned to the device's logical block size.

Since the semantics of fallocate are fairly well established already, wire
up the two pieces.  The other fallocate variants (collapse range, insert
range, and allocate blocks) are not supported.

Link: http://lkml.kernel.org/r/147518379992.22791.8849838163218235007.stgit@birch.djwong.orgSigned-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header
Cc: Brian Foster <bfoster@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure that the offset and length arguments that we're using to
construct WRITE SAME and DISCARD requests are actually aligned to the
logical block size.  Failure to do this causes other errors in other parts
of the block layer or the SCSI layer because disks don't support partial
logical block writes.

Link: http://lkml.kernel.org/r/147518379026.22791.4437508871355153928.stgit@birch.djwong.orgSigned-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header
Cc: Brian Foster <bfoster@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>