Use sigsp() instead of the open coded variant.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use sigsp() instead of the open coded variant.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

...to make it readable.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Now we can turn get_signal() to the main function.
Signed-off-by: NRichard Weinberger <richard@nod.at>

 - Pass a ksignal struct to it
 - Remove unused regs parameter
 - Make it private as it's nowhere outside of kernel/signal.c is used
Signed-off-by: NRichard Weinberger <richard@nod.at>

These parameters are nowhere used, so we can remove them.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Acked-by: NLennox Wu <lennox.wu@gmail.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
This inverts also the return codes of setup_*frame() to follow the
kernel convention.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NHelge Deller <deller@gmx.de>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
This inverts also the return codes of force_sigsegv_info()
and setup_frame() to follow the kernel convention.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Acked-by: NRichard Kuo <rkuo@codeaurora.org>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Tested-by: NMark Salter <msalter@redhat.com>
Acked-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NSteven Miao <realmz6@gmail.com>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

Pull timer fixes from Thomas Gleixner:
 "Two fixes in the timer area:
   - a long-standing lock inversion due to a printk
   - suspend-related hrtimer corruption in sched_clock"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks
  sched_clock: Avoid corrupting hrtimer tree during suspend

Pull ARM fixes from Russell King:
 "A few fixes for ARM.  Some of these are correctness issues:
   - TLBs must be flushed after the old mappings are removed by the DMA
     mapping code, but before the new mappings are established.
   - An off-by-one entry error in the Keystone LPAE setup code.

  Fixes include:
   - ensuring that the identity mapping for LPAE does not remove the
     kernel image from the identity map.
   - preventing userspace from trapping into kgdb.
   - fixing a preemption issue in the Intel iwmmxt code.
   - fixing a build error with nommu.

  Other changes include:
   - Adding a note about which areas of memory are expected to be
     accessible while the identity mapping tables are in place"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction
  ARM: idmap: add identity mapping usage note
  ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout
  ARM: fix alignment of keystone page table fixup
  ARM: 8112/1: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
  ARM: 8100/1: Fix preemption disable in iwmmxt_task_enable()
  ARM: DMA: ensure that old section mappings are flushed from the TLB

The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn)
should only be entered when a kgdb break instruction is executed
from the kernel. Otherwise, if kgdb is enabled, a userspace program
can cause the kernel to drop into the debugger by executing either
KGDB_BREAKINST or KGDB_COMPILED_BREAK.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NOmar Sandoval <osandov@osandov.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a note about the usage of the identity mapping; we do not support
accesses outside of the identity map region and kernel image while a
CPU is using the identity map.  This is because the identity mapping
may overwrite vmalloc space, IO mappings, the vectors pages, etc.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Pull vfs fixes from Al Viro:
 "This contains a couple of fixes - one is the aio fix from Christoph,
  the other a fallocate() one from Eric"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: fix check for fallocate on active swapfile
  direct-io: fix AIO regression

Pull x86 fix from Peter Anvin:
 "A single fix to not invoke the espfix code on Xen PV, as it turns out
  to oops the guest when invoked after all.  This patch leaves some
  amount of dead code, in particular unnecessary initialization of the
  espfix stacks when they won't be used, but in the interest of keeping
  the patch minimal that cleanup can wait for the next cycle"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64/entry/xen: Do not invoke espfix64 on Xen

Pull staging driver bugfixes from Greg KH:
 "Here are some tiny staging driver bugfixes that I've had in my tree
  for the past week that resolve some reported issues.  Nothing major at
  all, but it would be good to get them merged for 3.16-rc8 or -final"

* tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt6655: Fix disassociated messages every 10 seconds
  staging: vt6655: Fix Warning on boot handle_irq_event_percpu.
  staging: rtl8723au: rtw_resume(): release semaphore before exit on error
  iio:bma180: Missing check for frequency fractional part
  iio:bma180: Fix scale factors to report correct acceleration units
  iio: buffer: Fix demux table creation

Pull device mapper fixes from Mike Snitzer:
 "Fix dm bufio shrinker to properly zero-fill all fields.

  Fix race in dm cache that caused improper reporting of the number of
  dirty blocks in the cache"

* tag 'dm-3.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix race affecting dirty block count
  dm bufio: fully initialize shrinker

Pull ARM straggler SoC fix from Olof Johansson:
 "A DT bugfix for Nomadik that had an ambigouos double-inversion of a
  gpio line, and one MAINTAINER URL update that might as well go in now.

  We could hold off until the merge window, but then we'll just have to
  mark the DT fix for stable and it just seems like in total causing
  more work"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Update Tegra Git URL
  ARM: nomadik: fix up double inversion in DT

nr_dirty is updated without locking, causing it to drift so that it is
non-zero (either a small positive integer, or a very large one when an
underflow occurs) even when there are no actual dirty blocks.  This was
due to a race between the workqueue and map function accessing nr_dirty
in parallel without proper protection.

People were seeing under runs due to a race on increment/decrement of
nr_dirty, see: https://lkml.org/lkml/2014/6/3/648

Fix this by using an atomic_t for nr_dirty.

Reported-by: roma1390@gmail.com
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org