Signed-off-by: NDave Jones <davej@redhat.com>

This seems to work for a short period of time, but when
used in conjunction with a userspace governor that changes
the frequency regularly, it's only a matter of time before
everything just locks up.
Signed-off-by: NDave Jones <davej@redhat.com>

cpufreq are the only remaining bit to be solved for me to have a modpost
clean build for sparc64 - so I took one more look at it.
changelog entry:

Fix section mismatch warnings in cpufreq:
WARNING: drivers/cpufreq/cpufreq_stats.o - Section mismatch: reference to .init.text: from .data between 'cpufreq_stat_cpu_notifier' (at offset 0xa8) and 'notifier_policy_block'
WARNING: drivers/cpufreq/cpufreq_stats.o - Section mismatch: reference to .init.text: from .exit.text after 'cleanup_module' (at offset 0x30)

The culprint is the function: cpufreq_stat_cpu_callback
It is marked __cpuinit which get's redefined to __init in case
HOTPLUG_CPU is not enabled as per. init.h:

#ifdef CONFIG_HOTPLUG_CPU
#define __cpuinit
#else
#define __cpuinit       __init
#endif

$> grep HOTPLUG .config
CONFIG_HOTPLUG=y

But cpufreq_stat_cpu_callback() is used in:
__exit cpufreq_stats_exit()
static struct notifier_block cpufreq_stat_cpu_notifier

cpufreq_stat_cpu_notifier is again used in:
__init cpufreq_stats_init()
__exit cpufreq_stats_exit()

So in both cases used from both __init and __exit context.
Only solution seems to drop __cpuinit tag.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Fix the code to disable freqs less than 2GHz in N60 errata.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch adds proper logic to cpufreq driver in order to handle
CPU Hotplug.

When CPUs go on/offline, the affected CPUs data, cpufreq_policy->cpus,
is not updated properly. This causes sysfs directories and symlinks to
be in an incorrect state after few CPU on/offlines.
Signed-off-by: NJacob Shin <jacob.shin@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

powernow-k8: Let cpufreq driver handle affected CPUs

Let the cpufreq driver manage AMD Dual-Core CPUs being tied together.

Since cpufreq driver's affected CPUs data, cpufreq_policy->cpus, already
knows about which cores are tied together, powernow driver does not have
keep its internal data for every core.  (even a pointer.. it will never
be called on)  Telling cpufreq driver about cpu_core_map at init time is
sufficient.
Signed-off-by: NJacob Shin <jacob.shin@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Signed-off-by: NDave Jones <davej@redhat.com>

We already have one of these declared, so use it, instead
of declaring a second one for no good reason.
Signed-off-by: NDave Jones <davej@redhat.com>

Signed-off-by: NDave Jones <davej@redhat.com>

obscure corruption case

SGI-PV: 942658
SGI-Modid: xfs-linux-melb:xfs-kern:207119a
Signed-off-by: NEric Sandeen <sandeen@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

regressed recently via the fix for inherited quota inode attributes.

SGI-PV: 947312
SGI-Modid: xfs-linux-melb:xfs-kern:25318a
Signed-off-by: NNathan Scott <nathans@sgi.com>

fix.  Noticed by Roger Willcocks.

SGI-PV: 949821
SGI-Modid: xfs-linux-melb:xfs-kern:25257a
Signed-off-by: NNathan Scott <nathans@sgi.com>

In 295f7324 I moved defer_accept from
tcp_sock to request_queue and mistakingly reset it at reqsl_queue_alloc, causing
calls to setsockopt(TCP_DEFER_ACCEPT ) to be lost after bind, the fix is to
remove the zeroing of rskq_defer_accept from reqsl_queue_alloc.

Thanks to Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> for
reporting and testing the suggested fix.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nfnetlink_log infrastructure changes broke compatiblity of the LOG
targets. They currently use whatever log backend was registered first,
which means that if ipt_ULOG was loaded first, no messages will be printed
to the ring buffer anymore.

Restore compatiblity by using the old log functions by default and only use
the nf_log backend if the user explicitly said so.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The comparison wants to find out if the last list iteration reached the
end of the list. It needs to compare the iterator with the list head to
do this, not the element it is looking for.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only point of registering a queue handler is to provide an outfn,
so there is no need to check for it.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packets should be rerouted when they come back from userspace, not before.
Also move the queue_rerouters to RCU to avoid taking the queue_handler_lock
for each reinjected packet.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Every rerouter needs to provide a save and a reroute function, we don't
need to check for them. But we do need to check if a rerouter is registered
at all for the current family, with bridging for example packets of
unregistered families can hit nf_queue.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the registered data structure instead of copying it.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only reason post_input exists at all is that it gives us the
potential to adjust the checksums incrementally in future which
we ought to do.

However, after thinking about it for a bit we can adjust the
checksums without using this post_input stuff at all.  The crucial
point is that only the inner-most NAT-T SA needs to be considered
when adjusting checksums.  What's more, the checksum adjustment
comes down to a single u32 due to the linearity of IP checksums.

We just happen to have a spare u32 lying around in our skb structure :)
When ip_summed is set to CHECKSUM_NONE on input, the value of skb->csum
is currently unused.  All we have to do is to make that the checksum
adjustment and voila, there goes all the post_input and decap structures!

I've left in the decap data structures for now since it's intricately
woven into the sec_path stuff.  We can kill them later too.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We used to keep sg on the stack which is why the extra block was useful.
We've long since stopped doing that so let's kill the block and save
some indentation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some Sun parts don't have PCI_VENDOR_ID_SUN in the subsystem
vendor ID.  So add another fallback test, which is the name
of the OBP firmware device tree node.  If it's a Sun part we'll
get "network", else it will be named "ethernet".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

    
Not just cleanup but also fixes O32 readdir(2) emulation.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Reported and initial fix by Thomas Koeller <thomas.koeller@baslerweb.com>,
rewritten by me.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
A recent change requires cpu_possible_map to be initialized before
smp_sched_init() but most MIPS platforms were initializing their
processors in the prom_prepare_cpus callback of smp_prepare_cpus.  The
simple fix of calling prom_prepare_cpus from one of the earlier SMP
initialization hooks doesn't work well either since IPIs may require
init_IRQ() to have completed, so bit the bullet and split
prom_prepare_cpus into two initialization functions, plat_smp_setup
which is called early from setup_arch and plat_prepare_cpus called where
prom_prepare_cpus used to be called.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

With the latest kernels, I experienced some strange corruption, some
'*****' being randomly inserted in the character flow, like this:

	ashes:~#
	ashes:~#
	a*******shes:~#
	ashes:~#
	ashes:~#

Further investigation shows that the problem was introduced during
Alan's "TTY layer buffering revamp" patch, the amount of data to be
copied being reduced after buffer allocation.  Moving the count fixup
around solves the problem.
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Approved-by: NRogier Wolff <R.E.Wolff@BitWizard.nl>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit 9ec4b1f3 made kprobes not compile
without module support, so just make that clear in the Kconfig file.

Also, since it's marked EXPERIMENTAL, make that dependency explicit too.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The change to kernel/sched.c's init code to use for_each_cpu()
requires that the cpu_possible_map be setup much earlier.

Set it up via setup_arch(), constrained to NR_CPUS, and later
constrain it to max_cpus in smp_prepare_cpus().

This fixes SMP booting on sparc64.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 9c869eda broke voyager again
rather subtly because it already had its own topology exporting
functions, so now each CPU gets registered twice.

I think we can actually use the generic ones, so I don't propose
reverting it.  The attached should eliminate the voyager topology
functions in favour of the generic ones.

I also added a define to ensure voyager is never hotplug CPU (we don't
have the support in the SMP harness).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The commit e2c03888 added
setup_additional_cpus to setup.c but this is only defined if
CONFIG_HOTPLUG_CPU is set.  This patch changes the #ifdef to reflect that.
Signed-off-by: NBrian Magnuson <magnuson@rcn.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

RTC_IRQP_SET/RTC_EPOCH_SET don't take a pointer to an argument, but the
argument itself.  This actually simplifies the code and makes it work.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>