- 21 1月, 2012 2 次提交
-
-
由 Myron Stowe 提交于
With the conversion of atomicio's routines in place (see commits 6f68c91c and 700130b4), atomicio.[ch] can be removed, replacing the APEI specific pre-mapping capabilities with the more generalized versions that drivers/acpi/osl.c provides. Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Myron Stowe 提交于
Base ACPI (CA) currently does not support atomic 64-bit reads and writes (acpi_read() and acpi_write() split 64-bit loads/stores into two 32-bit transfers) yet APEI expects 64-bit transfer capability, even when running on 32-bit systems. This patch implements 64-bit read and write routines for APEI usage. This patch re-factors similar functionality introduced in commit 04c25997, bringing it into the ACPI subsystem in preparation for removing ./drivers/acpi/atomicio.[ch]. In the implementation I have replicated acpi_os_read_memory() and acpi_os_write_memory(), creating 64-bit versions for APEI to utilize, as opposed to something more elegant. My thinking is that we should attempt to see if we can get ACPI's CA/OSL changed so that the existing acpi_read() and acpi_write() interfaces are natively 64-bit capable and then subsequently remove the replication. Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 1月, 2012 1 次提交
-
-
由 Thomas Renninger 提交于
Delay the setting up of features (cpuidle, throttling by calling acpi_processor_start()) to the time when the hotplugged core got onlined the first time and got fully initialized. Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 18 1月, 2012 1 次提交
-
-
由 Tony Luck 提交于
ACPI 5.0 provides extensions to the EINJ mechanism to specify the target for the error injection - by APICID for cpu related errors, by address for memory related errors, and by segment/bus/device/function for PCIe related errors. Also extensions for vendor specific error injections. Tested-by: NChen Gong <gong.chen@linux.intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 17 1月, 2012 14 次提交
-
-
由 Kurt Garloff 提交于
In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. In order to know whether or not, we must know what version the SRAT table has. This patch stores the SRAT table revision for later consumption by arch specific __init functions. Signed-off-by: NKurt Garloff <kurt@garloff.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Version 20120111. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Lin Ming 提交于
Allows drivers to determine if any memory or I/O addresses will conflict with addresses used by ACPI operation regions. Introduces a new interface, acpi_check_address_range. http://marc.info/?t=132251388700002&r=1&w=2Reported-and-tested-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
This version contains full support for the ACPI 5.0 specification. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Zhang Rui 提交于
_AEI contains a resource template, this change adds support for the walk resources function. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
This interface converts an AML buffer to an internal ACPI_RESOURCE. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Executes _AEI and formats the result, similar to acpi_get_current_resources, etc. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Lin Ming 提交于
FixedDMA, GPIO descriptors, SerialBus descriptors Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Support within the interpreter and operation region dispatch. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Lin Ming 提交于
Adds acpi_acquire_mutex, acpi_release_mutex external interfaces. New file, utxfmutex.c. Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Adds new file, actbl3.h Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
If HW-reduced flag is set in the FADT, do not attempt to access or initialize any ACPI hardware, including SCI and global lock. No FACS will be present. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 13 1月, 2012 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 07 11月, 2011 3 次提交
-
-
由 Deepthi Dharwar 提交于
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Tested-by: NJean Pihet <j-pihet@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bart Van Assche 提交于
Recently the ACPI ops structs were constified but the inline version of register_hotplug_dock_device() was overlooked (see also commit 9c8b04be, June 25 2011). Update the inline function register_hotplug_dock_device() that is enabled with CONFIG_ACPI_DOCK=n too. This patch fixes at least the following compiler warnings: drivers/ata/libata-acpi.c: In function .ata_acpi_associate.: drivers/ata/libata-acpi.c:266:11: warning: passing argument 2 of .register_hotplug_dock_device. discards qualifiers from pointer target type include/acpi/acpi_drivers.h:146:19: note: expected .struct acpi_dock_ops *. but argument is of type .const struct acpi_dock_ops *. drivers/ata/libata-acpi.c:275:11: warning: passing argument 2 of .register_hotplug_dock_device. discards qualifiers from pointer target type include/acpi/acpi_drivers.h:146:19: note: expected .struct acpi_dock_ops *. but argument is of type .const struct acpi_dock_ops *. Cc: stable@vger.kernel.org Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Rafael J. Wysocki 提交于
ACPI_NO_HARDWARE_INIT is only used by acpi_early_init() and acpi_bus_init() when calling acpi_enable_subsystem(), but acpi_enable_subsystem() doesn't check that flag, so it can be dropped. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
This file had an include of module.h which was probably added in relation to this line: #define ACPI_EXPORT_SYMBOL(symbol) EXPORT_SYMBOL(symbol); However, we really expect symbol exporters to grab export.h themselves, and since this is only a define, we can remove the module.h include without aclinux.h itself causing any compile issues. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 15 10月, 2011 1 次提交
-
-
由 Prarit Bhargava 提交于
I originally submitted a patch to workaround this by pushing all Ejection Requests and Device Checks onto the kacpi_hotplug queue. http://marc.info/?l=linux-acpi&m=131678270930105&w=2 The patch is still insufficient in that Bus Checks also need to be added. Rather than add all events, including non-PCI-hotplug events, to the hotplug queue, mjg suggested that a better approach would be to modify the acpiphp driver so only acpiphp events would be added to the kacpi_hotplug queue. It's a longer patch, but at least we maintain the benefit of having separate queues in ACPI. This, of course, is still only a workaround the problem. As Bjorn and mjg pointed out, we have to refactor a lot of this code to do the right thing but at this point it is a better to have this code working. The acpi core places all events on the kacpi_notify queue. When the acpiphp driver is loaded and a PCI card with a PCI-to-PCI bridge is removed the following call sequence occurs: cleanup_p2p_bridge() -> cleanup_bridge() -> acpi_remove_notify_handler() -> acpi_os_wait_events_complete() -> flush_workqueue(kacpi_notify_wq) which is the queue we are currently executing on and the process will hang. Move all hotplug acpiphp events onto the kacpi_hotplug workqueue. In handle_hotplug_event_bridge() and handle_hotplug_event_func() we can simply push the rest of the work onto the kacpi_hotplug queue and then avoid the deadlock. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Cc: mjg@redhat.com Cc: bhelgaas@google.com Cc: linux-acpi@vger.kernel.org Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 03 8月, 2011 1 次提交
-
-
由 Len Brown 提交于
as GHES is optional... When # CONFIG_ACPI_APEI_GHES is not set: (.init.text+0x4c22): undefined reference to `ghes_disable' Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 7月, 2011 1 次提交
-
-
由 Vasiliy Kulikov 提交于
Structs battery_file, acpi_dock_ops, file_operations, thermal_cooling_device_ops, thermal_zone_device_ops, kernel_param_ops are not changed in runtime. It is safe to make them const. register_hotplug_dock_device() was altered to take const "ops" argument to respect acpi_dock_ops' const notion. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 14 7月, 2011 7 次提交
-
-
由 Lin Ming 提交于
Commit 28c2103d added new state ACPI_STATE_D3_COLD, so the device power states array must be expanded by one also. v2: Use ACPI_D_STATE_COUNT instead of number 5 for the array size. Reported-by: NDan Carpenter <error27@gmail.com> Suggested-by: NOldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Version 20110623. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Runtime option can be used to disable return value repair if this is causing a problem on a particular machine. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Version 20110527. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
Some machine may have broken firmware so that GHES and firmware first mode should be disabled. This patch adds support to that. Signed-off-by: NHuang Ying <ying.huang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Rafael J. Wysocki 提交于
All ACPICA locks are allocated by the same function, acpi_os_create_lock(), with the help of a local variable called "lock". Thus, when lockdep is enabled, it uses "lock" as the name of all those locks and regards them as instances of the same lock, which causes it to report possible locking problems with them when there aren't any. To work around this problem, define acpi_os_create_lock() as a macro and make it pass its argument to spin_lock_init(), so that lockdep uses it as the name of the new lock. Define this macron in a Linux-specific file, to minimize the resulting modifications of the OS-independent ACPICA parts. This change is based on an earlier patch from Andrea Righi and it addresses a regression from 2.6.39 tracked as https://bugzilla.kernel.org/show_bug.cgi?id=38152Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: NBorislav Petkov <bp@alien8.de> Tested-by: NAndrea Righi <andrea@betterlinux.com> Reviewed-by: NFlorian Mickler <florian@mickler.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Matthew Garrett 提交于
opregion-based platforms will send ACPI video event 0x80 for a range of notification types for legacy compatibility. This is interpreted as a display switch event, which may not be appropriate in the circumstances. When we receive such an event we should make sure that the platform is genuinely requesting a display switch before passing that event through to userspace. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Tested-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
- 29 5月, 2011 2 次提交
-
-
由 Lin Ming 提交于
_SxW returns an Integer containing the lowest D-state supported in state Sx. If OSPM has not indicated that it supports _PR3, then the value “3” corresponds to D3. If it has indicated _PR3 support, the value “3” represents D3hot and the value “4” represents D3cold. Linux does set _OSC._PR3, so we should fix it to expect that _SxW can return 4. Signed-off-by: NLin Ming <ming.m.lin@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Lin Ming 提交于
Usually, there are multiple processors defined in ACPI table, for example Scope (_PR) { Processor (CPU0, 0x00, 0x00000410, 0x06) {} Processor (CPU1, 0x01, 0x00000410, 0x06) {} Processor (CPU2, 0x02, 0x00000410, 0x06) {} Processor (CPU3, 0x03, 0x00000410, 0x06) {} } processor_physically_present(...) will be called to check whether those processors are physically present. Currently we have below codes in processor_physically_present, cpuid = acpi_get_cpuid(...); if ((cpuid == -1) && (num_possible_cpus() > 1)) return false; return true; In UP kernel, acpi_get_cpuid(...) always return -1 and num_possible_cpus() always return 1, so processor_physically_present(...) always returns true for all passed in processor handles. This is wrong for UP processor or SMP processor running UP kernel. This patch removes the !SMP version of acpi_get_cpuid(), so both UP and SMP kernel use the same acpi_get_cpuid function. And for UP kernel, only processor 0 is valid. https://bugzilla.kernel.org/show_bug.cgi?id=16548 https://bugzilla.kernel.org/show_bug.cgi?id=16357Tested-by: NAnton Kochkov <anton.kochkov@gmail.com> Tested-by: NAmbroz Bizjak <ambrop7@gmail.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 10 5月, 2011 4 次提交
-
-
由 Bob Moore 提交于
Version 20110413 Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
This change will force the execution of a _REG method underneath the EC device even if there is no corresponding operation region of type EmbeddedControl. Fixes a problem seen on some machines and apparently is compatible with Windows behavior. http://www.acpica.org/bugzilla/show_bug.cgi?id=875Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Moved to where the predefined regions are actually defined. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Moved this internal space id in preparation for ACPI 5.0 changes that will include some new space IDs. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-