Graceful reboot and poweroff via IPMI commands to the management
processor don't work. Power and reset keys are events from the
management processor which are generated via IPC messages. Passing
the keys to userspace does not work as neither acpid nor a desktop
environment are present.

This adds a notifier handler for the IPC messages so the kernel can
handle the key events directly and IPMI graceful shutdown will work.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: stable@vger.kernel.org
Signed-off-by: NOlof Johansson <olof@lixom.net>

Some of the clocks that were designated gate-clk do not have a gate, so
change those clocks to be of periph-clk type.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Update Kconfig to enable TWD.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable MMC/SD on the Broadcom mobile platforms, and increase the block
minors from the default 8 to 16 (since the Broadcom board by default
has root on the 8th partition).
Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org # v3.12

This enables a few more options on the sunxi defconfigs such that I can
use nfsroot to boot them (there is no local storage support yet). It
also enables PRINTK_TIME and tmpfs since it's a common distro requirement.
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Few more legacy booting vs device tree booting fixes that people
have noticed while booting things with device tree for things like
omap4 WLAN, smsc911x, and beagle audio. Hopefully this will be it
for the legacy booting vs device tree fixes for this -rc cycle.

* tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
  ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
  ARM: dts: omap3-beagle: Add omap-twl4030 audio support
  ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
  ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

BeagleBone Black uses the TI CPSW ethernet controller, enable it in the
multi_v7_defconfig for testing coverage purposes.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v3.12

From Nicolas Ferre:
AT91: second round of fixes for 3.13
- reduce IP frequency for I2C on sama5d3
- missing aliases directive for USART3 on 9x5 family
- a PM symbol is missing if !CONFIG_PM

* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
  ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
  ARM: at91: add usart3 alias to dtsi
  ARM: at91: sama5d3: reduce TWI internal clock frequency

From Jason Cooper, mvebu DT fixes for v3.13:
 - mvebu
    - PCIe fixes now that we have test devices with more ports.
    - fix access to coherency registers

* tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: re-enable PCIe on Armada 370 DB
  ARM: mvebu: use the virtual CPU registers to access coherency registers
  ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260
  ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Some omap related fixes that have come up with people moving to device
tree only based booting for omap2+.

The series contains a handful of fixes for the igep boards as they were
one of the first omap3 boards to jump over completely to device tree
based booting. So these can be considered regressions compared to
booting igep in legacy mode with board files in v3.12.

Also included are few other device tree vs legacy booting regressions:

- yet more missing omap3 .dtsi entries that have showed up booting
  various boards with device tree only

- n900 eMMC device tree fix

- fixes for beagle USB EHCI

- two fixes to make omap2420 MMC work

As we're moving omap2+ to be device tree only for v3.14, I'd like to
have v3.13 work equally well for legacy based booting and device tree
based booting. So there will be likely few more device tree related
booting patches trickling in.

This series also includes a regression fix for the omap timer posted
mode that may wrongly stay on from the bootloader for some SoCs.

* tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
  ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
  ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
  ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor
  ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO
  ARM: dts: omap3-igep: Fix bus-width for mmc1
  ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus
  ARM: OMAP2+: Disable POSTED mode for errata i103 and i767
  ARM: OMAP2+: Fix eMMC on n900 with device tree
  ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig
  ARM: OMAP2+: Fix more missing data for omap3.dtsi file
Signed-off-by: NOlof Johansson <olof@lixom.net>

drivers/net/ethernet/smsc/smsc911x.c is expecting supplies named
"vdd33a" and "vddvario". Currently the shared DTS file provides
"vmmc" and "vmmc_aux", and the supply lookup will fail:

smsc911x 2c000000.ethernet: Looking up vdd33a-supply from device tree
smsc911x 2c000000.ethernet: Looking up vdd33a-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed
smsc911x 2c000000.ethernet: Looking up vddvario-supply from device tree
smsc911x 2c000000.ethernet: Looking up vddvario-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed

Fix it!

Looks like commmit 6b2978ac (ARM: dts: Shared file for omap GPMC
connected smsc911x) made the problem more visible by moving the smc911x
configuration from the omap3-igep0020.dts file to the generic file.
But it seems we've had this problem since commit d72b4415
(ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support).

Tested on OMAP3 Overo platform.
Signed-off-by: NFlorian Vaussard <florian.vaussard@epfl.ch>
[tony@atomide.com: updated comments for the commits causing the problem]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 'cd8abed1' "ARM: OMAP2+: Powerdomain: Remove the need to
always have a voltdm associated to a pwrdm" leads to the following
Smatch complaint:

arch/arm/mach-omap2/powerdomain.c:131 _pwrdm_register()
	 error: we previously assumed 'arch_pwrdm' could be null (see line 105)

So, fix the unchecked dereference of arch_pwrdm.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This adds typical McBSP2-TWL4030 audio description to the legacy
Beagle Board.
Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and
Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes WLAN on omap4-sdp that got broken in v3.10 when we
moved omap4 to boot using device tree only as I did not have
the WL12XX card in my omap4 SDP to test with. The commit that
attempted to make WL12XX working on omap4 SDP was 775d2418
(ARM: dts: Fix muxing and regulator for wl12xx on the SDIO
bus for blaze).
Signed-off-by: NBalaji T K <balajitk@ti.com>
[tony@atomide.com: updated comments for the regression]
Signed-off-by: NTony Lindgren <tony@atomide.com>

pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.

Fix the following error message:
pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x

SDIO card is not detected after moving pin mux to omap4_pmx_core since
sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes a regression where WLAN did not work after a warm reset
or after one up/down cycle that happened when we move omap4 to boot
using device tree only. For reference, the kernel bug is described at:

https://bugzilla.kernel.org/show_bug.cgi?id=63821

Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: NBalaji T K <balajitk@ti.com>
[tony@atomide.com: update comments to describe the regression]
Signed-off-by: NTony Lindgren <tony@atomide.com>

If CONFIG_PM is not defined, then arch/arm/mach-at91/pm.c is not
compiled in.  This patch creates an inline function that does nothing
if CONFIG_PM is not defined.
Signed-off-by: NBrent Taylor <motobud@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Alias was missing for SoC of the at91sam9x5 familly that embed USART3.
Reported-by: NJiri Prchal <jiri.prchal@aksignal.cz>
[b.brezillon@overkiz.com: advised to place changes in at91sam9x5_usart3.dtsi]
Acked-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

With some devices, transfer hangs during I2C frame transmission. This issue
disappears when reducing the internal frequency of the TWI IP. Even if it is
indicated that internal clock max frequency is 66MHz, it seems we have
oversampling on I2C signals making TWI believe that a transfer in progress
is done.

This fix has no impact on the I2C bus frequency.

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Some features can be configured by the companion I2C chips,
which may not be available at the probe time. Fix the issue
by returning -EPROBE_DEFER when the MMC controller slots
are not configured.

While at it, let's also add minimal device tree support so
omap24xx platforms can use this driver without legacy mode
since we claim to support device tree for mach-omap2 based
systems.

Although adding the minimal device tree support is not strictly
a fix, it does remove one of the last blockers for dropping a
bunch of legacy platform data for mach-omap2.

Cc: linux-mmc@vger.kernel.org
Acked-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

We are wrongly relying on device id for the DMA configuration
which can lead to wrong DMA channel being selected.

Fix the issue by using the standard resources like we should.

Cc: linux-mmc@vger.kernel.org
Acked-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Beagle (rev. C4) and Beagle-XM (all revs) need VAUX2 1.8V supply
for the USB PHY.

As the generic PHY driver can't handle more than one supply
at the moment, we configure this supply to be always on.
This will cause a very small power impact if the USB host subsystem
is not in use, about 76.86 micro-W + LDO power.

Older Beagle boards (prior to C4) don't have VAUX2 connected anywhere,
so there won't be any functional impact on those boards other than
some additional LDO power consumption.
Reported-by: NNishanth Menon <nm@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

On Device Tree boot the VDDS_DSI regulator is not linked to
the DPI device so omapfb driver probing fails with:

[    3.186035] OMAPFB: omapfb_probe
[    3.190704] omapdss DPI error: can't get VDDS_DSI regulator
[    3.196594] omapfb omapfb: failed to connect default display
[    3.202667] omapfb omapfb: failed to init overlay connections
[    3.208892] OMAPFB: free_resources
[    3.212493] OMAPFB: free all fbmem
[    3.216735] omapfb omapfb: failed to setup omapfb

As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi
so getting the VDDS_DSI regulator will succeed on dpi_init_regulator().
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add node to support the USB Host and the USB OTG on the IGEP AQUILA
Processor Board.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The IGEP AQUILA EXPANSION has a 32KBit EEPROM for user data storage.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable the user leds on the IGEP AQUILA EXPANSION. The has two leds,
one green and one red, that are controllable by software.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable the hdmi output and the LCD Controller on IGEP AQUILA. Also
configure the correct pinmux for output of video data from the SoC
to the HDMI encoder.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The IGEPv2 has a TFP410 DPI-to-DVI encoder attached to OMAP's
Display SubSystem (DSS).

Add mux setup for DSS pins and also for the GPIO 170 pin that
is used to ensure that the DVI-D is powered down on power up.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add pin muxing support for IGEP boards i2c controllers.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Most of the boards are using the TI AM/DM37x processor, there is only a small
quantity of IGEP Processor Boards based on TI OMAP3530. So it's better use the
omap36xx.dtsi include instead of omap34xx.dtsi include. We can add support
for the 34xx based variant later on as needed.

To avoid confusion we have added to the model the (TI AM/DM37x) comment.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
[tony@atomide.com: updated comments for the 34xx to 36xx include change]
Signed-off-by: NTony Lindgren <tony@atomide.com>

The LBEE1USJYC is a WiFi/BT combo module used on OMAP3-based IGEP boards. In
both cases, IGEPv2 Rev. C and IGEP COM MODULE, the module is connected using
the same MMC interface and uses the same GPIOs.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and
do not mux data pins from mmc1_data4 to mmc1_data7.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

IGEP's DVI connector's DDC pins are connected to OMAP's third i2c bus.

When booting with Device Trees the requested bus number is set to -1
which means that the bus number should be dynamically assigned. So the
third i2c bus has 2 has a bus number.

Since now only DT booting is supported for IGEP boards after commit
06ff74fd ("ARM: OMAP2+: remove legacy support for IGEP boards"), the
i2c bus number has to be changed.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enabling of Posted mode is seen to cause problems on dmtimer modules on AM33xx
(much like other OMAPs).  Reference discussions on forums [1] [2]. Earlier
patch solving this on other OMAPs [3].

For OMAP SoCs with this errata, the fix has been to not enable Posted mode.
However, on some SoCs (atleast AM33xx) which carry this errata, Posted mode
is enabled on reset. So we not only need to ignore enabling of the POSTED bit
when the timer is requested, but also disable Posted mode if errata is present.

[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/285744.aspx
[2] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/270632.aspx
[3] http://www.spinics.net/lists/linux-omap/msg81770.html

Cc: stable@vgerk.kernel.org
Reported-by: NRuss Dill <russ.dill@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Merge tag 'ux500-defconfig-v3.13-rcs' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes

From Linus Walleij, Ux500 defconfig patches for the v3.13 rc series:

- Allow creation and mounting of devtmpfs, which is used
  by OpenEmbedded root filesystems among others.

- Enable CPUidle for the ux500, it has been accidentally
  disabled due to a Kconfig change.

* tag 'ux500-defconfig-v3.13-rcs' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: u8500_defconfig: add missing cpuidle option
  u8500_defconfig: allow creation and mounting of devtmpfs

Merge tag 'ux500-fixes-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes

From Linus Walleij, Ux500 fixes for the v3.13 series:

- Restore platform data for the (e)MMC/SD controllers, so they can
  pins and special flags properly like before.

* tag 'ux500-fixes-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots"
  Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings"

This reverts commit 49c12951.

The special settings for the SD/MMC card parameters that are not
yet fully agreed upon how to encode into the device tree went missing
with this commit. We need to first put it into the device tree,
and then remove the platform data.

Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This reverts commit ce16feb8.

This commit stopped tying down the name of the MMC/SD devices, but these
names are used in the pin control table, so the MMC/SD cards stopped
working.

Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

With the commit d3f2950f, the option
ARM_U8500_CPUIDLE was added to the Kconfig but not reflected in the
default config file, hence the cpuidle driver is no longer enabled
since this commit.

Enable it again by adding the missing option in the default config file.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch enables CONFIG_DETTMPFS and CONFIG_DEVTMPFS_MOUNT
flags for u8500 based devices.

In this way it's possible to create a tmpfs/ramfs already in the
early stages of the boot, allowing programs like udev/mdev to
populate the /dev directory.
Signed-off-by: NAndi Shyti <andi@etezian.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The I2C controller node needs #address-cells and #size-cells properties,
but these are currently missing. Add them. This allows child nodes to be
parsed correctly.

Cc: stable@vger.kernel.org
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>