- 27 3月, 2013 10 次提交
-
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Allocate FIFO address before registering net_device. This is preparation to change the pseudo hardware address format for firewire devices to include the offset of the FIFO for receipt of unicast datagrams, instead of mangling ARP/NDP messages in the driver layer. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Send L2 multicast packet via GASP (Global asynchronous stream packet) by seeing the multicast bit in the L2 hardware address, not by seeing upper- layer protocol address. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sekhar Nori 提交于
Use devres APIs where possible to simplify error handling in driver probe. While at it, also rename the goto targets in error path to introduce some consistency in how they are named. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Pravin B Shelar says: ==================== Following patch series restructure GRE and IPIP tunneling code to make it modular. It adds ip_tunnel module which acts as generic tunneling layer which has common code. These patches do not change any functionality. v3:v4: - Fixed compilation error in ipv6. - Few coding style fixes. v2-v3: - Use GPL exports for all export symbols. - Set default config NET_IP_TUNNEL to m. v1-v2: - Dropped patch to convert gre_proto_lock to rtnl lock. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Use common function get calculate rtnl_link_stats64 stats. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Use common ecn_encap functions from ip_tunnel module. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Fixes bug in VXLAN code where is iptunnel_xmit() called with NULL dev->tstats. This bug was introduced in commit 6aed0c8b (tunnel: use iptunnel_xmit() again). Following patch fixes bug by setting dev->tstats. It uses ip_tunnel module code to share stats function. CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Reuse common ip-tunneling code which is re-factored from GRE module. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2013 12 次提交
-
-
由 David S. Miller 提交于
It's always zero. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
ip-header id needs to be incremented even if IP_DF flag is set. This behaviour was changed in commit 490ab081 (IP_GRE: Fix IP-Identification). Following patch fixes it so that identification is always incremented. Reported-by: NCong Wang <amwang@redhat.com> Acked-by: NCong Wang <amwang@redhat.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
-
由 Pravin B Shelar 提交于
This reverts commit d6a8c36d. Next commit makes this commit unnecessary. Acked-by: NCong Wang <amwang@redhat.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
This reverts commit 10c0d7ed. Next commit makes this commit unnecessary. Acked-by: NCong Wang <amwang@redhat.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
If we have defined a sparse port allocation which is non-contiguous and contains gaps, the code freeing port_names will just stop when it encouters a first NULL port_names, which is not right, we should iterate over all possible number of ports (DSA_MAX_PORTS) until we are done. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch factors the freeing of the struct dsa_platform_data manipulated by the driver identically in two places to a single function. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The device tree binding documentation for dsa explicitely states that a DSA node should have its #address-cells property set to 2, yet the example still used 1, fix that typo. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Liu 提交于
This variable is never used. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Liu 提交于
This function is in fact counting the ring slots required for responses. Separate the concepts of ring slots and skb frags make the code clearer, as now netfront and netback can have different MAX_SKB_FRAGS, slot and frag are not mapped 1:1 any more. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Liu 提交于
This variable is supposed to hold reference to the last extra_info in the loop. However there is only type of extra info here and the loop to process extra info is missing, so this variable is never used and causes confusion. Remove it at the moment. We can add it back when necessary. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Li 提交于
fec_ptp.ko can't run individually rename fec.c to fec_main.c Build fec.o and fec_ptp.o into one fec.ko Remove unnessary EXPORT_SYMBOL in fec_ptp Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://1984.lsi.us.es/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter/IPVS updates for your net-next tree, they are: * Better performance in nfnetlink_queue by avoiding copy from the packet to netlink message, from Eric Dumazet. * Remove unnecessary locking in the exit path of ebt_ulog, from Gao Feng. * Use new function ipv6_iface_scope_id in nf_ct_ipv6, from Hannes Frederic Sowa. * A couple of sparse fixes for IPVS, from Julian Anastasov. * Use xor hashing in nfnetlink_queue, as suggested by Eric Dumazet, from myself. * Allow to dump expectations per master conntrack via ctnetlink, from myself. * A couple of cleanups to use PTR_RET in module init path, from Silviu-Mihai Popescu. * Remove nf_conntrack module a bit faster if netns are in use, from Vladimir Davydov. * Use checksum_partial in ip6t_NPT, from YOSHIFUJI Hideaki. * Sparse fix for nf_conntrack, from Stephen Hemminger. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2013 9 次提交
-
-
由 David S. Miller 提交于
Merge tag 'firewire-net-resource-mgt' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 firewire-net driver changes: - fix memory leak and kmap leak at shutdown - release IR DMA context already at ifdown rather than shutdown (many controllers have got only 4 of them, so let's not hold it longer than strictly necessary) - misc startup/shutdown changes which prepare for later addition of IPv6-over-1394 support Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hong zhi guo 提交于
When neither IFF_BRIDGE nor IFF_BRIDGE_PORT is set, and afspec == NULL but protinfo != NULL, we run into "if (err == 0) br_ifinfo_notify(RTM_NEWLINK, p);" with random value in ret. Thanks to Sergei for pointing out the error in commit comments. Signed-off-by: NHong Zhiguo <honkiko@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds support for registering DSA switches using Device Tree bindings. Note that we support programming the switch routing table even though no in-tree user seems to require it. I tested this on Armada 370 with a Marvell 88E6172 (not supported by mainline yet). Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Hello! After patch 1 got accepted to net-next I will also send a patch to netfilter-devel to make the corresponding changes to the netfilter reassembly logic. Thanks, Hannes -- >8 -- [PATCH 2/2] ipv6: implement RFC3168 5.3 (ecn protection) for ipv6 fragmentation handling This patch also ensures that INET_ECN_CE is propagated if one fragment had the codepoint set. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This patch just moves some code arround to make the ip4_frag_ecn_table and IPFRAG_ECN_* constants accessible from the other reassembly engines. I also renamed ip4_frag_ecn_table to ip_frag_ecn_table. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This patch adds a dev_addr_genid for IPv6. The goal is to use it, combined with dev_base_seq to check if a change occurs during a netlink dump. If a change is detected, the flag NLM_F_DUMP_INTR is set in the first message after the dump was interrupted. Note that only dump of unicast addresses is checked (multicast and anycast are not checked). Reported-by: NJunwei Zhang <junwei.zhang@6wind.com> Reported-by: NHongjun Li <hongjun.li@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This patch takes benefit of dev_addr_genid and dev_base_seq to check if a change occurs during a netlink dump. If a change is detected, the flag NLM_F_DUMP_INTR is set in the first message after the dump was interrupted. Note that seq and prev_seq must be reset between each family in rtnl_dump_all() because they are specific to each family. Reported-by: NJunwei Zhang <junwei.zhang@6wind.com> Reported-by: NHongjun Li <hongjun.li@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Baatz 提交于
When both the Marvell MV643XX ethernet driver and the Orion MDIO driver are compiled as modules, the ethernet driver may be probed before the MDIO driver. Let mv643xx_eth_probe() return EPROBE_DEFER in this case, i.e. when it cannot find the PHY. Signed-off-by: NSimon Baatz <gmbnomis@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Baatz 提交于
The mvmdio driver can be instantiated using device tree or as a classic platform device. In order to load the driver automatically by udev in the latter case, the driver needs to define a module alias for the platform device. Signed-off-by: NSimon Baatz <gmbnomis@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 3月, 2013 9 次提交
-
-
由 Dan Carpenter 提交于
This is a cut and paste typo. We call ->ref() a second time instead of ->deref(). Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch is meant to be a follow-up for a patch originally submitted under the title "ioat: Do not enable DCA if tag map is invalid". It was brought to my attention that the preferred approach for BIOS workarounds is to set the taint flag for TAINT_FIRMWARE_WORKAROUND for systems that require BIOS workarounds. This change makes it so that the DCA workarounds for broken BIOSes will now use WARN_TAINT_ONCE(1, TAINT_FIRMWARE_WORKAROUND, ...) instead of just printing a message via dev_err. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Pull to get the thermal netlink multicast group name fix, otherwise the assertion added in net-next to netlink to detect that kind of bug makes systems unbootable for some folks. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Otherwise build fails with CONFIG_DECNET && !CONFIG_DECNET_ROUTER Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
o When interface is down, mailbox command to get context statistics fails. So restrict driver from issuing get statistics command when interface is down. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o 83xx adapter does not support MSI interrupts, display warning whenever module parameter is used to load driver in MSI mode. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
o Due to improper data type of variable "type", interrupt resources were not getting deleted in hardware which was causing resource exhaustion in hardware. Hence mailbox command fails after some iterations of context change. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-