- 19 10月, 2016 10 次提交
-
-
由 Eric Garver 提交于
Fixes a panic when calling eth_get_headlen(). Noticed on i40e driver. Fixes: d5709f7a ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci") Signed-off-by: NEric Garver <e@erig.me> Reviewed-by: NJakub Sitnicki <jkbs@redhat.com> Acked-by: NAmir Vadai <amir@vadai.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
In some rare configurations, we get a warning about the 'index' variable being used without an initialization: drivers/net/ethernet/rocker/rocker_ofdpa.c: In function ‘ofdpa_port_fib_ipv4.isra.16.constprop’: drivers/net/ethernet/rocker/rocker_ofdpa.c:2425:92: warning: ‘index’ may be used uninitialized in this function [-Wmaybe-uninitialized] This is a false positive, the logic is just a bit too complex for gcc to follow here. Moving the intialization of 'index' a little further down makes it clear to gcc that the function always returns an error if it is not initialized. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The hdr_offset variable is only if we deal with a TCP or UDP packet, but as the check surrounding its usage tests for skb_is_gso() instead, the compiler has no idea if the variable is initialized or not at that point: drivers/net/hyperv/netvsc_drv.c: In function ‘netvsc_start_xmit’: drivers/net/hyperv/netvsc_drv.c:494:42: error: ‘hdr_offset’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an additional check for the transport type, which tells the compiler that this path cannot happen. Since the get_net_transport_info() function should always be inlined here, I don't expect this to result in additional runtime checks. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
gcc found a reference to an uninitialized variable in the error handling of bcm_enet_open, introduced by a recent cleanup: drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open' drivers/net/ethernet/broadcom/bcm63xx_enet.c:1129:2: warning: 'phydev' may be used uninitialized in this function [-Wmaybe-uninitialized] This makes the use of that variable conditional, so we only reference it here after it has been used before. Unlike my normal patches, I have not build-tested this one, as I don't currently have mips test in my randconfig setup. Fixes: 625eb866 ("net: ethernet: broadcom: bcm63xx: use phydev from struct net_device") Cc: Philippe Reynes <tremyfr@gmail.com> Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
reuseport_add_sock() is not used from a module, no need to export it. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
It is possible for the MTU to be changed during the initialization process with the VNIC Server. Ensure that the net device is updated to reflect the new MTU. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
Increment driver version to reflect features that have been added since release. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: NSatish Ashok <sashok@cumulusnetworks.com> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2016 16 次提交
-
-
由 Tobias Klauser 提交于
Remove the unused but set variable icsk in listening_get_next to fix the following GCC warning when building with 'W=1': net/ipv4/tcp_ipv4.c: In function ‘listening_get_next’: net/ipv4/tcp_ipv4.c:1890:31: warning: variable ‘icsk’ set but not used [-Wunused-but-set-variable] Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
Do not let number of offload queue sets to go more than MAX_OFLD_QSETS, which would otherwise crash the driver on machines with cores more than MAX_OFLD_QSETS. Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Remove the unused but set variable dev in ip_do_fragment to fix the following GCC warning when building with 'W=1': net/ipv4/ip_output.c: In function ‘ip_do_fragment’: net/ipv4/ip_output.c:541:21: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable] Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Cassel 提交于
Allow autoneg to enable flow control by default. The behavior when autoneg is off has not changed. Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NJesper Nilsson <jespern@axis.com> Acked-by: NLars Persson <larper@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Cassel 提交于
phy_device->supported is originally set by the PHY driver. The ethernet driver should filter phy_device->supported to only contain flags supported by the IP. The IP supports setting rx and tx flow control independently, therefore SUPPORTED_Pause and SUPPORTED_Asym_Pause should not be cleared. If the flags are cleared, pause frames cannot be enabled (even if they are supported by the PHY). Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NJesper Nilsson <jespern@axis.com> Acked-by: NLars Persson <larper@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Remove the unused but set variable master_dev in check_local_dest to fix the following GCC warning when building with 'W=1': net/hsr/hsr_forward.c: In function ‘check_local_dest’: net/hsr/hsr_forward.c:303:21: warning: variable ‘master_dev’ set but not used [-Wunused-but-set-variable] Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2016-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== This is relatively small, mostly to get the SG/crypto from stack removal fix that crashes things when VMAP stack is used in conjunction with software crypto. Aside from that, we have: * a fix for AP_VLAN usage with the nl80211 frame command * two fixes (and two preparation patches) for A-MSDU, one to discard group-addressed (multicast) and unexpected 4-address A-MSDUs, the other to validate A-MSDU inner MAC addresses properly to prevent controlled port bypass ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Functions bnx2_reg_rd_ind(), bnx2_reg_wr_ind() and bnx2_ctx_wr() can be called with IRQs disabled when netconsole is enabled. So they should use spin_{,un}lock_irq{save,restore} instead of _bh variants. Example call flow: bnx2_poll() ->bnx2_poll_link() ->bnx2_phy_int() ->bnx2_set_remote_link() ->bnx2_shmem_rd() ->bnx2_reg_rd_ind() -> spin_lock_bh(&bp->indirect_lock); spin_unlock_bh(&bp->indirect_lock); ... -> __local_bh_enable_ip static inline void __local_bh_enable_ip(unsigned long ip) WARN_ON_ONCE(in_irq() || irqs_disabled()); <<<<<< WARN Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Javier Martinez Canillas says: ==================== net: Fix module autoload for several platform drivers I noticed that module autoload won't be working in a bunch of platform drivers in the net subsystem and this patch series contains the fixes. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias alias: platform:brcm-sf2 After this patch: $ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias alias: platform:brcm-sf2 alias: of:N*T*Cbrcm,bcm7445-switch-v4.0C* alias: of:N*T*Cbrcm,bcm7445-switch-v4.0 Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/dsa/b53/b53_mmap.ko | grep alias $ After this patch: $ modinfo drivers/net/dsa/b53/b53_mmap.ko | grep alias alias: of:N*T*Cbrcm,bcm63xx-switchC* alias: of:N*T*Cbrcm,bcm63xx-switch alias: of:N*T*Cbrcm,bcm6368-switchC* alias: of:N*T*Cbrcm,bcm6368-switch alias: of:N*T*Cbrcm,bcm6328-switchC* alias: of:N*T*Cbrcm,bcm6328-switch alias: of:N*T*Cbrcm,bcm3384-switchC* alias: of:N*T*Cbrcm,bcm3384-switch Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/hisilicon//hns_mdio.ko | grep alias alias: platform:Hi-HNS_MDIO alias: acpi*:HISI0141:* After this patch: $ modinfo drivers/net/ethernet/hisilicon//hns_mdio.ko | grep alias alias: platform:Hi-HNS_MDIO alias: of:N*T*Chisilicon,hns-mdioC* alias: of:N*T*Chisilicon,hns-mdio alias: of:N*T*Chisilicon,mdioC* alias: of:N*T*Chisilicon,mdio alias: acpi*:HISI0141:* Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias alias: platform:qcom-emac After this patch: $ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias alias: platform:qcom-emac alias: of:N*T*Cqcom,fsm9900-emacC* alias: of:N*T*Cqcom,fsm9900-emac Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Acked-by: NTimur Tabi <timur@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko | grep alias alias: acpi*:HISI00B2:* alias: acpi*:HISI00B1:* After this patch: $ modinfo drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko | grep alias alias: acpi*:HISI00B2:* alias: acpi*:HISI00B1:* alias: of:N*T*Chisilicon,hns-dsaf-v2C* alias: of:N*T*Chisilicon,hns-dsaf-v2 alias: of:N*T*Chisilicon,hns-dsaf-v1C* alias: of:N*T*Chisilicon,hns-dsaf-v1 Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ $ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias $ After this patch: $ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias alias: of:N*T*Csigma,smp8734-ethernetC* alias: of:N*T*Csigma,smp8734-ethernet alias: of:N*T*Csigma,smp8642-ethernetC* alias: of:N*T*Csigma,smp8642-ethernet alias: of:N*T*Caurora,nb8800C* alias: of:N*T*Caurora,nb8800 Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Acked-by: NMans Rullgard <mans@mansr.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Javier Martinez Canillas 提交于
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias $ After this patch: $ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias alias: of:N*T*Cezchip,nps-mgt-enetC* alias: of:N*T*Cezchip,nps-mgt-enet Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 10月, 2016 4 次提交
-
-
由 Colin Ian King 提交于
A memory leak of qe occurs when t4_sched_queue_unbind fails, so fix this by free'ing qe on the error exit path. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
After Jesper commit back in linux-3.18, we trigger a lockdep splat in proc_create_data() while allocating memory from pktgen_change_name(). This patch converts t->if_lock to a mutex, since it is now only used from control path, and adds proper locking to pktgen_change_name() 1) pktgen_thread_lock to protect the outer loop (iterating threads) 2) t->if_lock to protect the inner loop (iterating devices) Note that before Jesper patch, pktgen_change_name() was lacking proper protection, but lockdep was not able to detect the problem. Fixes: 8788370a ("pktgen: RCU-ify "if_list" to remove lock in next_to_run()") Reported-by: NJohn Sperbeck <jsperbeck@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10ec, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ard Biesheuvel 提交于
Some crypto implementations (such as the generic CCM wrapper in crypto/) use scatterlists to map fields of private data in their struct aead_req. This means these data structures cannot live in the vmalloc area, which means that they cannot live on the stack (with CONFIG_VMAP_STACK.) This currently occurs only with the generic software implementation, but the private data and usage is implementation specific, so move the whole data structures off the stack into heap by allocating every time we need to use them. In addition, take care not to put any of our own stack allocations into scatterlists. This involves reserving some extra room when allocating the aead_request structures, and referring to those allocations in the scatter- lists (while copying the data from the stack before the crypto operation) Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 16 10月, 2016 4 次提交
-
-
由 Alexey Khoroshilov 提交于
vmxnet3_set_mc() checks new_table_pa returned by dma_map_single() with dma_mapping_error(), but even there it assumes zero is invalid pa (it assumes dma_mapping_error(...,0) returns true if new_table is NULL). The patch adds an explicit variable to track status of new_table_pa. Found by Linux Driver Verification project (linuxtesting.org). v2: use "bool" and "true"/"false" for boolean variables. Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
PTR_ERR(NULL) is success. We have to preserve the error code earlier. Fixes: 7086605a ("stmmac: fix error check when init ptp") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timur Tabi 提交于
There is a race condition that can occur if EMAC interrupts are enabled when phy_disconnect() is called. phy_disconnect() sets adjust_link to NULL. When an interrupt occurs, the ISR might call phy_mac_interrupt(), which wakes up the workqueue function phy_state_machine(). This function might reference adjust_link, thereby causing a null pointer exception. Signed-off-by: NTimur Tabi <timur@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ard Biesheuvel 提交于
PCI devices that are 64-bit DMA capable should set the coherent DMA mask as well as the streaming DMA mask. On some architectures, these are managed separately, and so the coherent DMA mask will be left at its default value of 32 if it is not set explicitly. This results in errors such as r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded hwdev DMA mask = 0x00000000ffffffff, dev_addr = 0x00000080fbfff000 swiotlb: coherent allocation failed for device 0000:02:00.0 size=4096 CPU: 0 PID: 1062 Comm: systemd-udevd Not tainted 4.8.0+ #35 Hardware name: AMD Seattle/Seattle, BIOS 10:53:24 Oct 13 2016 on systems without memory that is 32-bit addressable by PCI devices. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2016 3 次提交
-
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2016-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.9 wlcore * fix a double free regression causing hard to track crashes rtl8xxxu * fix driver reload issues, a memory leak and an endian bug rtlwifi * fix a major regression introduced in 4.9 with firmware loading on certain hardware ath10k * fix regression about broken cal_data debugfs file (since 4.7) ath9k * revert temperature compensation for AR9003+ devices, it was causing too much problems ath6kl * add Dell OEM SDIO I/O for the Venue 8 Pro ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
Check answers from USB stack and avoid re-sending the request multiple times if the device does not respond. This fixes the following problem, observed with a probably flaky adapter. [62108.732707] usb 1-3: new high-speed USB device number 5 using xhci_hcd [62108.914421] usb 1-3: New USB device found, idVendor=0b95, idProduct=7720 [62108.914463] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [62108.914476] usb 1-3: Product: AX88x72A [62108.914486] usb 1-3: Manufacturer: ASIX Elec. Corp. [62108.914495] usb 1-3: SerialNumber: 000001 [62114.109109] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -110 [62114.109139] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffff92 [62119.109048] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -110 ... Since the USB timeout is 5 seconds, and the operation is retried 30 times, this results in [62278.180353] INFO: task mtpd:1725 blocked for more than 120 seconds. [62278.180373] Tainted: G W 3.18.0-13298-g94ace9e #1 [62278.180383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ... [62278.180957] kworker/2:0 D 0000000000000000 0 5744 2 0x00000000 [62278.180978] Workqueue: usb_hub_wq hub_event [62278.181029] ffff880177f833b8 0000000000000046 ffff88017fd00000 ffff88017b126d80 [62278.181048] ffff880177f83fd8 ffff880065a71b60 0000000000013340 ffff880065a71b60 [62278.181065] 0000000000000286 0000000103b1c199 0000000000001388 0000000000000002 [62278.181081] Call Trace: [62278.181092] [<ffffffff8e0971fd>] ? console_conditional_schedule+0x2c/0x2c [62278.181105] [<ffffffff8e094f7b>] schedule+0x69/0x6b [62278.181117] [<ffffffff8e0972e0>] schedule_timeout+0xe3/0x11d [62278.181133] [<ffffffff8daadb1b>] ? trace_timer_start+0x51/0x51 [62278.181146] [<ffffffff8e095a05>] do_wait_for_common+0x12f/0x16c [62278.181162] [<ffffffff8da856a7>] ? wake_up_process+0x39/0x39 [62278.181174] [<ffffffff8e095aee>] wait_for_common+0x52/0x6d [62278.181187] [<ffffffff8e095b3b>] wait_for_completion_timeout+0x13/0x15 [62278.181201] [<ffffffff8de676ce>] usb_start_wait_urb+0x93/0xf1 [62278.181214] [<ffffffff8de6780d>] usb_control_msg+0xe1/0x11d [62278.181230] [<ffffffffc037d629>] usbnet_write_cmd+0x9c/0xc6 [usbnet] [62278.181286] [<ffffffffc03af793>] asix_write_cmd+0x4e/0x7e [asix] [62278.181300] [<ffffffffc03afb41>] asix_set_sw_mii+0x25/0x4e [asix] [62278.181314] [<ffffffffc03b001d>] asix_mdio_read+0x51/0x109 [asix] ... Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Brandeburg 提交于
Sparse was complaining when we went to prototype some code using ethtool_cmd_speed_set and SPEED_100000, which uses the upper 16 bits of __u32 speed for the first time. CHECK ... .../uapi/linux/ethtool.h:123:28: warning: cast truncates bits from constant value (186a0 becomes 86a0) The warning is actually bogus, as no bits are really lost, but we can get rid of the sparse warning with this one small change. Reported-by: NPreethi Banala <preethi.banala@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2016 3 次提交
-
-
由 Brenden Blanco 提交于
In cases where the number of tx rings is not a multiple of the number of rx rings, the tx completion event will be handled on a different core from the transmit and population of the ring. Races on the ring will lead to a double-free of the page, and possibly other corruption. The rings are initialized by default with a valid multiple of rings, based on the number of cpus, therefore an invalid configuration requires ethtool to change the ring layout. For instance 'ethtool -L eth0 rx 9 tx 8' will cause packets received on rx0, and XDP_TX'd to tx48, to be completed on cpu3 (48 % 9 == 3). Resolve this discrepancy by shifting the irq for the xdp tx queues to start again from 0, modulo rx_ring_num. Fixes: 9ecc2d86 ("net/mlx4_en: add xdp forwarding and data write support") Reported-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== qed: Fix dependencies and warnings series The first patch in this series follows Dan Carpenter's reports about Smatch warnings for recent qed additions and fixes those. The second patch is the most significant one [and the reason this is ntended for 'net'] - it's based on Arnd Bermann's suggestion for fixing compilation issues that were introduced with the roce addition as a result of certain combinations of qed, qede and qedr Kconfig options. The third follows the discussion with Arnd and clears a lot of the warnings that arise when compiling the drivers with "C=1". Please consider applying this series to 'net'. ==================== Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This cleans many of the warnings that would arise in qed as a result of compilations with C=1; Most of those are the addition of missing 'static' to functions, although there are several other fixes as well. Signed-off-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-