Split off the memory and type validation. This is done both from reqbufs
and create_bufs, and will also be done by vb2 helpers in a later patch.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is now controlled by sysfs.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is now controlled by sysfs.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l_i2c_print_ioctl wasn't used and v4l_print_ioctl could be replaced by
v4l_printk_ioctl.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since this could theoretically change the debug value while in the middle
of v4l2-ioctl.c, we make a copy of vfd->debug to ensure consistent debug
behavior.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement the default case which finalizes the table conversion and allows
us to remove the last part of the switch.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add the necessary plumbing to make it possible to replace the switch by a
table driven implementation.

The ioctls ops can either be called directly, or by calling a small function
that does some additional work if needed.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The switch statement that determines how much data should be copied from
userspace is replaced by a table lookup.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A block of code is moved down in the code to make later changes easier.
Do just the move without other changes to keep the diff readable for the
upcoming patch.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add ".has_radio = 1" for BTTV_BOARD_MAGICTVIEW061 because there are
some CHP05x/CHP06x boards with a radio tuner.

I still have an analog Askey Magic TView card (CHP051, PCI 144f:3002)
which I use for radio only. This worked fine with kernel 2.6.37
(openSUSE 11.4), but no longer works with kernel 3.1.10 (openSUSE 12.1).

The reason apparently is that ".has_radio = 1" is missing in
bttv-cards.c for BTTV_BOARD_MAGICTVIEW061; when I add this line and
recompile the kernel, radio is working again. The line is still missing
in the latest git tree, for which I have generated the attached patch.

I can't test what will happen for CHP05x/CHP06x devices without radio;
however, it seems that other cards also have the problem that there are
some boards with radio and some without, so I hope that this can be
sorted out.
Signed-off-by: NThomas Betker <thomas.betker@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add ADV7393 I²C-based video encoder driver. This driver has been tested on
custom hardware. It has been tested for composite output. It is derived from the
ADV7343 driver.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove variable and ignore return value of stv090x_chk_signal().

Tested by compilation only.

[mchehab@redhat.com: instead of reverting and applying V3,
 applied just the diff patch, for the sake of a cleaner history]
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The alternate setting number is not equal to the alternate setting index
in the interface alternate settings table. Use the alternate setting
number from the interface descriptor when calling usb_set_interface().
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When video endpoint is configured as bulk, a ZLP is sent after every
video frames with size as multiple of 512 bytes. This is done so that
host can detect end of transfer and pass data for processing.
Still, frames that are multiple of 16K in size gets dropped. The ZLP
sent by camera is ignored by uvc_video_decode_bulk(). The makes sure
that the ZLP is not part of a video frame before ignoring it. If ZLP
follows a video frame, then it triggers completion callback.

[mchehab@redhat.com: Fix a small CodingStyle issue]
Signed-off-by: NJayakrishnan Memana <jayakrishnan.memana@maxim-ic.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Several developers have reported that the lack of macros for the struct
uvc_xu_control_query query field in uvcvideo.h was confusing and forced
them to look at the driver source code to find out what applications
were supposed to pass in that field.

Add a comment to the header to clarify the expected usage of the query
field.
Reported-by: NPaulo Assis <pj.assis@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch simply fixes some logging calls:
- Use KERN_INFO when printing the chip status.
- Add a missing space when logging the drxk_gate_ctrl call.
- Use the same logging text as always if the scu_command in GetQAMLockStatus fails.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently there are two different implementations (in the firmware) for
the QAM demodulator command: one takes 4 and the other takes 2
parameters. The driver shows an error in dmesg When using the
4-parameter command with firmware that implements the 2-parameter
command. Unfortunately this happens every time when chaning the
frequency (on DVB-C).

This patch simply makes configurable, how many command parameters will
be used. All existing drxk_config instances using the "drxk_a3.mc" were
updated because this firmware is the only loadable firmware where the
QAM demodulator command takes 4 parameters. Some firmwares in the ROM
might also use it. The drxk instances in the em28xx-dvb driver were also
updated to silence the warnings.

If no qam_demod_parameter_count is given in the drxk_config struct, then
the correct number of parameters will be auto-detected.

[mchehab@redhat.com: Fix a small CodingStyle issue at one comment]
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

IQM_AF_CLKNEG_CLKNEGDATA__M is 0x2 and
IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS is 0.  (clkNeg | 0x2) is never
equal to zero so the condition can never be true.

I consulted with Ralph Metzler and the '|' should be changed to a '&'.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
CC: Ralph Metzler <rjkm@metzlerbros.de>
Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When tuner-xc2028 is not compiled as a module, dracut will
need to copy the firmware inside the initfs image.

So, use MODULE_FIRMWARE() to indicate such need.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

USB_VIDEO_CLASS_INPUT_EVDEV should be dependent on the UVC
selection, as otherwise, when UVC is unselected, this dependent
config still appears.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The IR to LIRC option were at the wrong sub-menu. Move it to the right
place.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Better arrange the remote controller driver items to happen after the
core support, on their proper menus, and making clerarer what is media
core options and what is media driver options.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Commit 7a6f6c29 (cx231xx: use
URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer
for URB twice. This works for the URBs allocated with usb_alloc_urb(),
as those are allocated from cohernent DMA pools, but the flag was also
added for the VBI and audio URBs, which have a manually allocated area.
This leaves the random trash in the structure after allocation as the
DMA address, corrupting memory and preventing VBI and audio from
working. Letting the USB core map the buffers solves the problem.
Signed-off-by: NDavid Dillow <dave@thedillows.org>
Cc: Sri Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Most calls to cx231xx_capture_start() already use the values from
TRANSFER_TYPE, but cx231xx_capture_start() and
cx231xx_initialize_stream_xfer() were hand coding the values.
Use the named values (81 is never passed in), and simplify
cx231xx_capture_start(), as the switch statements were identical and
pcb_config->config_num is a u8, so any non-zero config got the same
result.
Signed-off-by: NDavid Dillow <dave@thedillows.org>
Cc: Sri Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The firmwares are there at the same place for a long time. However,
each time I need to remember where it is, I need to seek at the net.

The better is to just add a logic at the get_dvb_firmare script,
in order to obtain it from a reliable source.

Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

changeset 2b719d7b (v4l: drop v4l2_buffer.input and V4L2_BUF_FLAG_INPUT)
broke compilation on x86_64:

	v4l2-compat-ioctl32.c: In function 'get_v4l2_buffer32':
	v4l2-compat-ioctl32.c:391:4: error: expected ')' before 'return'
	...
	v4l2-compat-ioctl32.c: In function 'put_v4l2_buffer32':
	v4l2-compat-ioctl32.c:475:4: error: expected ')' before 'return'
	...

Add the missing close parenthesis character.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>