With the hist object having the perf_hpp_list we can now iterate output
format entries based in the hists object. Adding hists__for_each_format
macro to do that.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-26-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introducing perf_hpp_list__for_each_format macro to iterate
perf_hpp_list object's output entries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-20-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When all callchains of a hist entry is percent-limited, do not add a
blank line at the end.  It makes the entry look like it doesn't have
callchains.
Reported-and-Tested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornetSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report -s comm --percent-limit 0.01 --stdio
  ...
     9.95%  swapper
            |
            |--7.57%--intel_idle
            |          cpuidle_enter_state
            |          cpuidle_enter
            |          call_cpuidle
            |          cpu_startup_entry
            |          |
            |          |--4.89%--start_secondary
            |          |
            |           --2.68%--rest_init
            |                     start_kernel
            |                     x86_64_start_reservations
            |                     x86_64_start_kernel
	    |
	    |--0.15%--__schedule
	    |          |
	    |          |--0.13%--schedule
	    |          |          schedule_preempt_disable
	    |          |          cpu_startup_entry
            |          |          |
            |          |          |--0.09%--start_secondary
            |          |          |
            |          |           --0.04%--rest_init
            |          |                     start_kernel
            |          |                     x86_64_start_reservations
            |          |                     x86_64_start_kernel
            |          |
            |           --0.01%--schedule_preempt_disabled
            |                     cpu_startup_entry
  ...

Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.

Before:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--4.89%--start_secondary
               |
                --2.68%--rest_init
                          start_kernel
                          x86_64_start_reservations
                          x86_64_start_kernel

After:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
             --7.57%--intel_idle
                       cpuidle_enter_state
                       cpuidle_enter
                       call_cpuidle
                       cpu_startup_entry
                       |
                       |--4.89%--start_secondary
                       |
                        --2.68%--rest_init
                                  start_kernel
                                  x86_64_start_reservations
                                  x86_64_start_kernel
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pass hist entry's period to graph callchain print function.  This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.

No functional change intended.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's just a wrapper function to align the start position ofcallchains to
'comm' of each thread if it's a first sort key.  But it doesn't not work
with tracepoint events and also with upcoming hierarchy view.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When there are multiple events, each dynamic sort key is defined just
for one event.  In this case other events will always show "N/A" for
those fields.  But they are meaningless and consume precious screen
width.

Let's skip those undefined dynamic fields.

  $ perf record -e kmem:kmalloc,kmem:kfree -a sleep 1

  $ perf report -s 'comm,kmalloc.*' --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 20K of event 'kmem:kmalloc'
  # Event count (approx.): 20533
  #
  # Overhead  Command           call_site                 ptr  bytes_req  bytes_alloc            gfp_flags
  # ........  .......  ..................  ..................  .........  ...........  ...................
  #
      99.89%  perf       ffffffffa01d4396  0xffff8803ffb79720         96           96    GFP_NOFS|GFP_ZERO
       0.06%  sleep      ffffffff8114e1cd  0xffff8803d228a000       4096         4096           GFP_KERNEL
       0.03%  perf       ffffffff811d6ae6  0xffff8803f7678f00        240          256  GFP_KERNEL|GFP_ZERO
       0.00%  perf       ffffffff812263c1  0xffff880406172380        128          128           GFP_KERNEL
       0.00%  perf       ffffffff812264b9  0xffff8803ffac1600        504          512           GFP_KERNEL
       0.00%  perf       ffffffff81226634  0xffff880401dc5280         28           32           GFP_KERNEL
       0.00%  sleep      ffffffff81226da9  0xffff8803ffac3a00        392          512           GFP_KERNEL

  # Samples: 20K of event 'kmem:kfree'
  # Event count (approx.): 20597
  #
  # Overhead  Command
  # ........  ..............
  #
      99.63%  perf
       0.14%  sleep
       0.11%  irq/36-iwlwifi
       0.11%  kworker/u16:0
       0.01%  Xorg
       0.00%  firefox
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-12-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'.  The percent is
same as before and it's the default behavior.  The period displays the
raw period value rather than the percentage.  The count displays the
number of occurrences.

  $ perf report --no-children --stdio -g percent
  ...
    39.93%  swapper  [kernel.vmlinux]  [k] intel_idel
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--28.63%-- start_secondary
               |
                --11.30%-- rest_init

  $ perf report --no-children --show-total-period --stdio -g period
  ...
    39.93%   13018705  swapper  [kernel.vmlinux]  [k] intel_idel
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--9334403-- start_secondary
               |
                --3684302-- rest_init

  $ perf report --no-children --show-nr-samples --stdio -g count
  ...
    39.93%     80  swapper  [kernel.vmlinux]  [k] intel_idel
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--57-- start_secondary
               |
                --23-- rest_init
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is a preparation to support for printing other type of callchain
value like count or period.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org
[ renamed new _sprintf_ operation to _scnprintf_ ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.

For example, the following 20 lines can be printed in 3 lines with the
folded output mode:

  $ perf report -g flat --no-children | grep -v ^# | head -20
      60.48%  swapper  [kernel.vmlinux]  [k] intel_idle
              54.60%
                 intel_idle
                 cpuidle_enter_state
                 cpuidle_enter
                 call_cpuidle
                 cpu_startup_entry
                 start_secondary

              5.88%
                 intel_idle
                 cpuidle_enter_state
                 cpuidle_enter
                 call_cpuidle
                 cpu_startup_entry
                 rest_init
                 start_kernel
                 x86_64_start_reservations
                 x86_64_start_kernel

  $ perf report -g folded --no-children | grep -v ^# | head -3
      60.48%  swapper  [kernel.vmlinux]  [k] intel_idle
  54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
  5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel

This mode is supported only for --stdio now and intended to be used by
some scripts like in FlameGraphs[1].  Support for other UI might be
added later.

[1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.htmlRequested-and-Tested-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Refactor the duplicated code to resolve the symbol name or
the address of a symbol into a single function.

Used in next patch to add common functionality.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-6-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Set column width and do not change it if user gives -w/--column-widths
option.  It'll truncate longer symbols than the width if exists.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

And use verbose as an global object in following functions:

  __map_groups__fprintf_maps
  __map_groups__fprintf_removed_maps
  map_groups__fprintf_maps
  map_groups__fprintf

Also making map_groups__fprintf_maps static.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On stdio, there's a problem that it shows invalid values for
callchains in cumulated hist entries.  It's because it only cares
about the self period.  But with --children behavior, we always add
callchain info to the cumulated entries so it should use the value in
that case.

Before:

  # Children      Self  Command      Shared Object            Symbol
  # ........  ........  .......  .................  ................
  #
      61.22%     0.32%  swapper  [kernel.kallsyms]      [k] cpu_idle
                    |
                    --- cpu_idle
                       |
                       |--16530.76%-- start_secondary
                       |
                       |--2758.70%-- rest_init
                       |          start_kernel
                       |          x86_64_start_reservations
                       |          x86_64_start_kernel
                        --6837850969203030.00%-- [...]

After:

  # Children      Self  Command      Shared Object            Symbol
  # ........  ........  .......  .................  ................
  #
      61.22%     0.32%  swapper  [kernel.kallsyms]      [k] cpu_idle
                    |
                    --- cpu_idle
                       |
                       |--85.70%-- start_secondary
                       |
                        --14.30%-- rest_init
                                  start_kernel
                                  x86_64_start_reservations
                                  x86_64_start_kernel
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-24-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

If -g cumulative option is given, it needs to show entries which don't
have self overhead.  So apply percent-limit to accumulated overhead
percentage in this case.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-14-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Now we moved to the perf_hpp_[_sort]_list so no need to keep the old
hist_entry__sort_list and sort__first_dimension.  Also the
hist_entry__sort_snprintf() can be gone as hist_entry__snprintf()
provides the functionality.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-18-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Some fields missed to set default column length so it broke align in
--stdio output.  Add perf_hpp__reset_width() to set it to a sane
default value.

Note that this change will ignore -w/--column-widths option for now.

Before:
  $ perf report -F cpu,comm,overhead --stdio
  ...
  # CPU          Command  Overhead
  #   ...............  ........
  #
    0          firefox     2.65%
    0      kworker/0:0     1.45%
    0          swapper     5.52%
    0         synergys     0.92%
    1          firefox     4.54%

After:
  # CPU          Command  Overhead
  # ...  ...............  ........
  #
      0          firefox     2.65%
      0      kworker/0:0     1.45%
      0          swapper     5.52%
      0         synergys     0.92%
      1          firefox     4.54%
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-17-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When it converted sort entries to hpp formats, it missed se->elide
handling, so add it for compatibility.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-16-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Until now the hpp and sort functions do similar jobs different ways.
Since the sort functions converted/wrapped to hpp formats it can do
the job in a uniform way.

The perf_hpp__sort_list has a list of hpp formats to sort entries and
the perf_hpp__list has a list of hpp formats to print output result.

To have a backward compatibility, it automatically adds 'overhead'
field in front of sort list.  And then all of fields in sort list
added to the output list (if it's not already there).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-7g3h86woz2sckg3h1lj42ygj@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Moving towards sharing map groups within a process threads.

Because of this we need the map groups to be dynamically allocated. No
other functional change is intended in here.

Based on a patch by Jiri Olsa, but this time _just_ making the
conversion from statically allocating thread->mg to turning it into a
pointer and instead of initializing it at thread's constructor,
introduce a constructor/destructor for the map_groups class and
call at thread creation time.

Later we will introduce the get/put methods when we move to sharing
those map_groups, when the get/put refcounting semantics will be needed.
Signed-off-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-3-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Those functions need evsel to investigate event group and it's passed
via hpp->ptr.  However as it can be missed easily so it's better to
pass it via an argument IMHO.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394437440-11609-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of the pointer to buffer and its size so that it can also get
private argument passed along with hpp.

This is a preparation of further change.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Several areas already used this technique, so do some audit to
consistently use it elsewhere.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9sbere0kkplwe45ak6rk4a1f@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

They convey no information, perhaps I was bitten by some snake at some
point, complete the detox by naming the last of those arguments more
sensibly.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commit tightened up the buffer size for output to strict width
of used format columns:

  99cf666c perf hists: Fix formatting of long symbol names

This works fine until you hit color overhead output which places extra
bytes into output buffer. We need to account for color overhead in the
output buffer. Adding maximum color byte size to the output buffer size.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382700293-1803-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We had a hardcoded buffer for formatting histogram entries, truncating
long symbol names (C++ anyone?).

Fix it by using hists__sort_list_width() before formatting the first
histogram entry to calculate the max lenght needed by traversing the
overheads and columns lists (sort order).
Reported-by: NStephane Eranian <eranian@google.com>
Tested-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vdfkkyfdp8rboh7j9344o3ss@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving hist_entry__period_snprintf function into stdio code and making
it static, as it's no longer used anywhere else.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-ah8ms343h8xygt20iqz91kz4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding 'struct perf_hpp_fmt' into hpp callbacks, so commands can access
their private data.

It'll be handy for diff command in future to be able to access file
related data for each column.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-7vy2m18574b1bicoljn8e9lw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The --percent-limit option is for not showing small overhead entries in
the output.  Maybe we want to set a certain default value like 0.1.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show group member's overhead also when showing the leader's if event
group is enabled.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-10-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As this function deals exclusively with hists->stats.

Preparatory patch for removing the by now needless session->hists, that
should be just session->stats.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-be0o8si9f1z40cwoa534f7me@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding perf_hpp__list list to register and contain all period related
columns the command is interested in.

This way we get rid of static array holding all possible columns and
enable commands to register their own columns.

It'll be handy for diff command in future to process and display data
for multiple files.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-kiykge4igrcl7etmpmveto1h@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding -F option to display the formula for specified computation.

This is mainly to facilitate debugging, but can be useful anyway.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The struct he_stat is for separating out statistics data of a hist
entry.  It is required for later changes.

It's just a mechanical change and should have no functional differences.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The total_period is available in struct hists data via the 'struct
hist_entry::hists' pointer. There's no need to carry it through the
output code path.

Removing 'struct perf_hpp::total_period' pointer, because it's no longer
needed.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-7-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The hists pointer is now part of the 'struct hist_entry'.

And since the overhead and baseline columns are split now, there's no
reason to pass it through the output path.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-5-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the overhead and baseline columns are handled within single
function and the distinction is made by 'baseline hists' pointer passed
by 'struct perf_hpp::ptr'.

Since hists pointer is now part of each hist_entry, it's possible to
locate paired hists pointer directly from the passed struct hist_entry
pointer.

Also separating those 2 columns makes the code more obvious.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-4-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving the position calculation into the diff command, so the position
as prepared inside struct hist_entry data and there's no need to compute
in the output display path.

Removing 'displacement' from struct perf_hpp as it is no longer needed.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When a field separator is given, the output format doesn't need to be
fancy like aligning to column length, coloring the percent value and so
on.  And since there's a slight difference to normal format, fix it not
to break backward compatibility.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1346640790-17197-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Current hist print functions are messy because it has to consider many
of command line options and the code doing that is scattered around to
places. So when someone wants to add an option to manipulate the hist
output it'd very easy to miss to update all of them in sync. And things
getting worse as more options/features are added continuously.

So I'd like to refactor them using hpp formats and move common code to
ui/hist.c in order to make it easy to maintain and to add new features.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1346640790-17197-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>