- 19 1月, 2006 7 次提交
-
-
由 Russell King 提交于
-
由 David Vrabel 提交于
Patch from David Vrabel Export ixp4xx_exp_bus_size so modules can use the IXP4XX_EXP_BUS_BASE(n) macro. Also, fix a printk format warning. Signed-off-by: NDavid Vrabel <dvrabel@arcom.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Commit f4619025 broke the kernel decompressor (at least on PXA). Here's the fix. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre This is kernel provided user space code. Since a syscall is used, it has to be updated to work with EABI. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Patch from Andrew Victor This patch fixes two small issues with 2.6.15-git12. 1) Corrected major/minor numbers for ttyAT devices in the KConfig help. (Patch from Karl Olsen) 2) tty->flip.count has been removed. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David Vrabel 提交于
Patch from David Vrabel PXA27x SSP controller has a few different registers, including SCR (serial clock rate) in SSCR0. Signed-off-by: NDavid Vrabel <dvrabel@arcom.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 1月, 2006 33 次提交
-
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 David Chinner 提交于
a page while we are still submitting other buffers on the same page for I/O. SGI-PV: 948197 SGI-Modid: xfs-linux-melb:xfs-kern:25004a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Bryan O'Sullivan 提交于
sparse can't parse a struct definition in include/asm-powerpc/lppaca.h, even though gcc can accept it. The form looks like this: struct __attribute__((whatever)) foo { }; An equivalent that both gcc and sparse can handle is struct foo { } __attribute__((whatever)); This is the only definition of this type in the tree, and fixing it is easier than fixing sparse. Signed-off-by: NBryan O'Sullivan <bos@serpentine.com> [ Side note: fixing sparse wouldn't be hard, but the "attribute at the end" version is the canonical one, and the one that makes sense. So let's just fix the kernel instead. Luc Van Oostenryck already sent out a sparse patch to the sparse mailing list in case anybody cares. -- Linus ] Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Stephen Hemminger 提交于
There are a couple of problems in the DMA setup code for skge. * In the 64 bit case, it doesn't set the consistent mask. * In the 32 bit case, the error check is backwards! It likely will only be visible as a bug on 64 bit platforms. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Somewhat cleaner in the resync as someone cleaned up the pio xfer users Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jason Gaston 提交于
Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Alan Cox 提交于
sizeof() return is not an int, so use max_t to get the types right. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Be more careful about transmit locking, this solves a possible race between tx_complete and transmit, that would cause a tx timeout. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Don't need to inline quite so many routines, let the compiler decide Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Can use kzalloc here. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Make sure and rate limit all the error messages that might occur. If a problem occurs then a few messages are enough. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Small optimization, if dma addresses are 32 bits, then high bits are always zero. Signed-off-by: NStephen Hemminger <shemminger@osdl.or> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Don't need to zero out the status ring entries after processing. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Be more careful about memory barriers. The only place we really need them is before and after updating the chip's ring interface. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Fix problems with Yukon FE rev 2 chipset. Don't cut and paste bugs in from sk98lin driver. Change how the ram buffer is divided up, and make the math clearer. Also, set the thresholds where rx takes precedence. The threshold values are just guesses at this point, it might be worth tuning them later. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Version update. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Need to call pci_set_consistent_dma_mask in the case of 64 bit DMA. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Need to make sure that sky2 receive buffers are 64 bit aligned. Also, don't need to start off with GFP_ATOMIC on initial setup. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jesse Brandeburg 提交于
e100: e100 whitespace fixes These are whitespace only fixes. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jesse Brandeburg 提交于
e100: Handle the return values from pci_* functions This is to resolve warnings during compile time. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jesse Brandeburg 提交于
e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue) Set the end of list bit to cause the hardware's transmit state machine to work correctly and not prevent management (BMC) traffic. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
sbusfb_compat_ioctl() needs to return int, not long, as that is what the fb_ops->fb_compat_ioctl method prototype wants. Need to git rid of the "struct file *file" first argument to fbiogetputcmap() and fbiogscursor() to match calls done in sbusfb_compat_ioctl(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Sesterhenn 提交于
this patch changes if() BUG(); constructs in iommu.c to BUG_ON(); so it gets save to define BUG() and BUG_ON() to nullstatements. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: NTony Lindgren <tony@atomide.com>
-