- 07 5月, 2014 40 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Now It Can Be Done(tm) - we don't need to do iov_shorten() in generic_file_direct_write() anymore, now that all ->direct_IO() instances are converted to proper iov_iter methods and honour iter->count and iter->iov_offset properly. Get rid of count/ocount arguments of generic_file_direct_write(), while we are at it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... and don't open-code iov_iter_alignment() there Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
same as iov_iter_get_pages(), except that pages array is allocated (kmalloc if possible, vmalloc if that fails) and left for caller to free. Lustre and NFS ->direct_IO() switched to it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
counts the pages covered by iov_iter, up to given limit. do_block_direct_io() and fuse_iter_npages() switched to it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... to fuse_direct_{read,write}(). ->direct_IO() path uses the iov_iter passed by the caller instead. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
iov_iter_get_pages(iter, pages, maxsize, &start) grabs references pinning the pages of up to maxsize of (contiguous) data from iter. Returns the amount of memory grabbed or -error. In case of success, the requested area begins at offset start in pages[0] and runs through pages[1], etc. Less than requested amount might be returned - either because the contiguous area in the beginning of iterator is smaller than requested, or because the kernel failed to pin that many pages. direct-io.c switched to using iov_iter_get_pages() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
For now, just use the same thing we pass to ->direct_IO() - it's all iovec-based at the moment. Pass it explicitly to iov_iter_init() and account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO() uses. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
iov_iter-using variant of generic_file_aio_read(). Some callers converted. Note that it's still not quite there for use as ->read_iter() - we depend on having zero iter->iov_offset in O_DIRECT case. Fortunately, that's true for all converted callers (and for generic_file_aio_read() itself). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
returns the value aligned as badly as the worst remaining segment in iov_iter is. Use instead of open-coded equivalents. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
the thing is, we want to advance what's given to ->direct_IO() as we are forming the request; however, the callers care about the amount of data actually transferred, not the amount we tried to transfer. It's more convenient to allow ->direct_IO() instances do use iov_iter_advance() on the copy of iov_iter, leaving the actual advancing of the original to caller. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
unmodified, for now Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
all callers of ->aio_read() and ->aio_write() have iov/nr_segs already checked - generic_segment_checks() done after that is just an odd way to spell iov_length(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
all callers can use copy_page_from_iter() and it actually simplifies them. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: agp: info leak in agpioc_info_wrap() fs/affs/super.c: bugfix / double free fanotify: fix -EOVERFLOW with large files on 64-bit slub: use sysfs'es release mechanism for kmem_cache revert "mm: vmscan: do not swap anon pages just because free+file is low" autofs: fix lockref lookup mm: filemap: update find_get_pages_tag() to deal with shadow entries mm/compaction: make isolate_freepages start at pageblock boundary MAINTAINERS: zswap/zbud: change maintainer email address mm/page-writeback.c: fix divide by zero in pos_ratio_polynom hugetlb: ensure hugepage access is denied if hugepages are not supported slub: fix memcg_propagate_slab_attrs drivers/rtc/rtc-pcf8523.c: fix month definition
-
由 Dan Carpenter 提交于
On 64 bit systems the agp_info struct has a 4 byte hole between ->agp_mode and ->aper_base. We need to clear it to avoid disclosing stack information to userspace. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
Commit 842a859d ("affs: use ->kill_sb() to simplify ->put_super() and failure exits of ->mount()") adds .kill_sb which frees sbi but doesn't remove sbi free in case of parse_options error causing double free+random crash. Signed-off-by: NFabian Frederick <fabf@skynet.be> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [3.14.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Woods 提交于
On 64-bit systems, O_LARGEFILE is automatically added to flags inside the open() syscall (also openat(), blkdev_open(), etc). Userspace therefore defines O_LARGEFILE to be 0 - you can use it, but it's a no-op. Everything should be O_LARGEFILE by default. But: when fanotify does create_fd() it uses dentry_open(), which skips all that. And userspace can't set O_LARGEFILE in fanotify_init() because it's defined to 0. So if fanotify gets an event regarding a large file, the read() will just fail with -EOVERFLOW. This patch adds O_LARGEFILE to fanotify_init()'s event_f_flags on 64-bit systems, using the same test as open()/openat()/etc. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=696821Signed-off-by: NWill Woods <wwoods@redhat.com> Acked-by: NEric Paris <eparis@redhat.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
debugobjects warning during netfilter exit: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 4178 at lib/debugobjects.c:260 debug_print_object+0x8d/0xb0() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20 Modules linked in: CPU: 6 PID: 4178 Comm: kworker/u16:2 Tainted: G W 3.11.0-next-20130906-sasha #3984 Workqueue: netns cleanup_net Call Trace: dump_stack+0x52/0x87 warn_slowpath_common+0x8c/0xc0 warn_slowpath_fmt+0x46/0x50 debug_print_object+0x8d/0xb0 __debug_check_no_obj_freed+0xa5/0x220 debug_check_no_obj_freed+0x15/0x20 kmem_cache_free+0x197/0x340 kmem_cache_destroy+0x86/0xe0 nf_conntrack_cleanup_net_list+0x131/0x170 nf_conntrack_pernet_exit+0x5d/0x70 ops_exit_list+0x5e/0x70 cleanup_net+0xfb/0x1c0 process_one_work+0x338/0x550 worker_thread+0x215/0x350 kthread+0xe7/0xf0 ret_from_fork+0x7c/0xb0 Also during dcookie cleanup: WARNING: CPU: 12 PID: 9725 at lib/debugobjects.c:260 debug_print_object+0x8c/0xb0() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20 Modules linked in: CPU: 12 PID: 9725 Comm: trinity-c141 Not tainted 3.15.0-rc2-next-20140423-sasha-00018-gc4ff6c4 #408 Call Trace: dump_stack (lib/dump_stack.c:52) warn_slowpath_common (kernel/panic.c:430) warn_slowpath_fmt (kernel/panic.c:445) debug_print_object (lib/debugobjects.c:262) __debug_check_no_obj_freed (lib/debugobjects.c:697) debug_check_no_obj_freed (lib/debugobjects.c:726) kmem_cache_free (mm/slub.c:2689 mm/slub.c:2717) kmem_cache_destroy (mm/slab_common.c:363) dcookie_unregister (fs/dcookies.c:302 fs/dcookies.c:343) event_buffer_release (arch/x86/oprofile/../../../drivers/oprofile/event_buffer.c:153) __fput (fs/file_table.c:217) ____fput (fs/file_table.c:253) task_work_run (kernel/task_work.c:125 (discriminator 1)) do_notify_resume (include/linux/tracehook.h:196 arch/x86/kernel/signal.c:751) int_signal (arch/x86/kernel/entry_64.S:807) Sysfs has a release mechanism. Use that to release the kmem_cache structure if CONFIG_SYSFS is enabled. Only slub is changed - slab currently only supports /proc/slabinfo and not /sys/kernel/slab/*. We talked about adding that and someone was working on it. [akpm@linux-foundation.org: fix CONFIG_SYSFS=n build] [akpm@linux-foundation.org: fix CONFIG_SYSFS=n build even more] Signed-off-by: NChristoph Lameter <cl@linux.com> Reported-by: NSasha Levin <sasha.levin@oracle.com> Tested-by: NSasha Levin <sasha.levin@oracle.com> Acked-by: NGreg KH <greg@kroah.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
This reverts commit 0bf1457f ("mm: vmscan: do not swap anon pages just because free+file is low") because it introduced a regression in mostly-anonymous workloads, where reclaim would become ineffective and trap every allocating task in direct reclaim. The problem is that there is a runaway feedback loop in the scan balance between file and anon, where the balance tips heavily towards a tiny thrashing file LRU and anonymous pages are no longer being looked at. The commit in question removed the safe guard that would detect such situations and respond with forced anonymous reclaim. This commit was part of a series to fix premature swapping in loads with relatively little cache, and while it made a small difference, the cure is obviously worse than the disease. Revert it. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NRafael Aquini <aquini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [3.12+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ian Kent 提交于
autofs needs to be able to see private data dentry flags for its dentrys that are being created but not yet hashed and for its dentrys that have been rmdir()ed but not yet freed. It needs to do this so it can block processes in these states until a status has been returned to indicate the given operation is complete. It does this by keeping two lists, active and expring, of dentrys in this state and uses ->d_release() to keep them stable while it checks the reference count to determine if they should be used. But with the recent lockref changes dentrys being freed sometimes don't transition to a reference count of 0 before being freed so autofs can occassionally use a dentry that is invalid which can lead to a panic. Signed-off-by: NIan Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Dave Jones reports the following crash when find_get_pages_tag() runs into an exceptional entry: kernel BUG at mm/filemap.c:1347! RIP: find_get_pages_tag+0x1cb/0x220 Call Trace: find_get_pages_tag+0x36/0x220 pagevec_lookup_tag+0x21/0x30 filemap_fdatawait_range+0xbe/0x1e0 filemap_fdatawait+0x27/0x30 sync_inodes_sb+0x204/0x2a0 sync_inodes_one_sb+0x19/0x20 iterate_supers+0xb2/0x110 sys_sync+0x44/0xb0 ia32_do_call+0x13/0x13 1343 /* 1344 * This function is never used on a shmem/tmpfs 1345 * mapping, so a swap entry won't be found here. 1346 */ 1347 BUG(); After commit 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") this comment and BUG() are out of date because exceptional entries can now appear in all mappings - as shadows of recently evicted pages. However, as Hugh Dickins notes, "it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably any other PAGECACHE_TAG_*) to appear on an exceptional entry. I expect it comes down to an occasional race in RCU lookup of the radix_tree: lacking absolute synchronization, we might sometimes catch an exceptional entry, with the tag which really belongs with the unexceptional entry which was there an instant before." And indeed, not only is the tree walk lockless, the tags are also read in chunks, one radix tree node at a time. There is plenty of time for page reclaim to swoop in and replace a page that was already looked up as tagged with a shadow entry. Remove the BUG() and update the comment. While reviewing all other lookup sites for whether they properly deal with shadow entries of evicted pages, update all the comments and fix memcg file charge moving to not miss shmem/tmpfs swapcache pages. Fixes: 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NDave Jones <davej@redhat.com> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
The compaction freepage scanner implementation in isolate_freepages() starts by taking the current cc->free_pfn value as the first pfn. In a for loop, it scans from this first pfn to the end of the pageblock, and then subtracts pageblock_nr_pages from the first pfn to obtain the first pfn for the next for loop iteration. This means that when cc->free_pfn starts at offset X rather than being aligned on pageblock boundary, the scanner will start at offset X in all scanned pageblock, ignoring potentially many free pages. Currently this can happen when a) zone's end pfn is not pageblock aligned, or b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE enabled and a hole spanning the beginning of a pageblock This patch fixes the problem by aligning the initial pfn in isolate_freepages() to pageblock boundary. This also permits replacing the end-of-pageblock alignment within the for loop with a simple pageblock_nr_pages increment. Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Reported-by: NHeesub Shin <heesub.shin@samsung.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seth Jennings 提交于
sjenning@linux.vnet.ibm.com is no longer a viable entity. Signed-off-by: NSeth Jennings <sjennings@variantweb.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rik van Riel 提交于
It is possible for "limit - setpoint + 1" to equal zero, after getting truncated to a 32 bit variable, and resulting in a divide by zero error. Using the fully 64 bit divide functions avoids this problem. It also will cause pos_ratio_polynom() to return the correct value when (setpoint - limit) exceeds 2^32. Also uninline pos_ratio_polynom, at Andrew's request. Signed-off-by: NRik van Riel <riel@redhat.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nishanth Aravamudan 提交于
Currently, I am seeing the following when I `mount -t hugetlbfs /none /dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's related to the fact that hugetlbfs is properly not correctly setting itself up in this state?: Unable to handle kernel paging request for data at address 0x00000031 Faulting instruction address: 0xc000000000245710 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries .... In KVM guests on Power, in a guest not backed by hugepages, we see the following: AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 64 kB HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages are not supported at boot-time, but this is only checked in hugetlb_init(). Extract the check to a helper function, and use it in a few relevant places. This does make hugetlbfs not supported (not registered at all) in this environment. I believe this is fine, as there are no valid hugepages and that won't change at runtime. [akpm@linux-foundation.org: use pr_info(), per Mel] [akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined] Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
After creating a cache for a memcg we should initialize its sysfs attrs with the values from its parent. That's what memcg_propagate_slab_attrs is for. Currently it's broken - we clearly muddled root-vs-memcg caches there. Let's fix it up. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Cui 提交于
PCF8523 uses 1-12 to represent month according to datasheet. link: www.nxp.com/documents/data_sheet/PCF8523.pdf. Signed-off-by: NChris Cui <chris.wei.cui@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-