- 01 2月, 2008 40 次提交
-
-
由 Denis V. Lunev 提交于
Different hashtables are used for IPv6 and IPv4 raw sockets, so no need to check the socket family in the iterator over hashtables. Clean this out. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
I made a silly typo by entering IPPROTO_IP (== 0) instead of IPPROTO_IPIP (== 4). This broke the reception of incompressible packets. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
All but one struct dst_ops static initializations miss explicit initialization of entries field. As this field is atomic_t, we should use ATOMIC_INIT(0), and not rely on atomic_t implementation. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
NewReno should add cnt per skb (as with FACK) instead of depending on SACKED_ACKED bits which won't be set with it at all. Effectively, NewReno should always exists after the first iteration anyway (or immediately if there's already head in lost_out. This was fixed earlier in net-2.6.25 but got reverted among other stuff and I didn't notice that this is still necessary (actually wasn't even considering this case while trying to figure out the reports because I lived with different kind of code than it in reality was). This should solve the WARN_ONs in TCP code that as a result of this triggered multiple times in every place we check for this invariant. Special thanks to Dave Young <hidave.darkstar@gmail.com> and Krishna Kumar2 <krkumar2@in.ibm.com> for trying with my debug patches. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by: NDave Young <hidave.darkstar@gmail.com> Tested-by: NKrishna Kumar2 <krkumar2@in.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The comment about "race free view of the set of network namespaces" was a bit hasty. Look (there even can be only one CPU, as discovered by Alexey Dobriyan and Denis Lunev): put_net() if (atomic_dec_and_test(&net->refcnt)) /* true */ __put_net(net); queue_work(...); /* * note: the net now has refcnt 0, but still in * the global list of net namespaces */ == re-schedule == register_pernet_subsys(&some_ops); register_pernet_operations(&some_ops); (*some_ops)->init(net); /* * we call netlink_kernel_create() here * in some places */ netlink_kernel_create(); sk_alloc(); get_net(net); /* refcnt = 1 */ /* * now we drop the net refcount not to * block the net namespace exit in the * future (or this can be done on the * error path) */ put_net(sk->sk_net); if (atomic_dec_and_test(&...)) /* * true. BOOOM! The net is * scheduled for release twice */ When thinking on this problem, I decided, that getting and putting the net in init callback is wrong. If some init callback needs to have a refcount-less reference on the struct net, _it_ has to be careful himself, rather than relying on the infrastructure to handle this correctly. In case of netlink_kernel_create(), the problem is that the sk_alloc() gets the given namespace, but passing the info that we don't want to get it inside this call is too heavy. Instead, I propose to crate the socket inside an init_net namespace and then re-attach it to the desired one right after the socket is created. After doing this, we also have to be careful on error paths not to drop the reference on the namespace, we didn't get the one on. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NDenis Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Add missing initialization of the new nl_info.nl_net field in rtm_to_fib6_config(). This will be needed the store network namespace associated to the fib6_config struct. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Laszlo Attila Toth 提交于
A userspace program may wish to set the mark for each packets its send without using the netfilter MARK target. Changing the mark can be used for mark based routing without netfilter or for packet filtering. It requires CAP_NET_ADMIN capability. Signed-off-by: NLaszlo Attila Toth <panther@balabit.hu> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update firmware to support programmable flow control. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Make use of the programmable high/low water marks in 5709 for 802.3 flow control. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The CTX_WR macro is unnecessary and obfuscates the code. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the code. Many callers to these macros read and write shared memory from the bp->shmem_base, so we add 2 similar functions that automatically add the shared memory base. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Make the tx coalescing setup code independent of the MSIX vector. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
1. Correct the MII expansion serdes control register definition. 2. Check an additional RUDI_INVALID bit when determining 5706S link. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
The bluetooth hci_conn sysfs add/del executed in the default workqueue. If the del_conn is executed after the new add_conn with same target, add_conn will failed with warning of "same kobject name". Here add btaddconn & btdelconn workqueues, flush the btdelconn workqueue in the add_conn function to avoid the issue. Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When I moved the nexthdr setting out of IPComp I accidently moved the reading of ipch->nexthdr after the decompression. Unfortunately this means that we'd be reading from a stale ipch pointer which doesn't work very well. This patch moves the reading up so that we get the correct nexthdr value. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Update fib_trie with some fib_hash fixes: - check for duplicate alternative routes for prefix+tos+priority when replacing route - properly insert by matching tos together with priority - fix alias walking to use list_for_each_entry_continue for insertion and deletion when fa_head is not NULL - copy state from fa to new_fa on replace (not a problem for now) - additionally, avoid replacement without error if new route is same, as Joonwoo Park suggests. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
fib_info can be shared by many route prefixes but we don't want duplicate alternative routes for a prefix+tos+priority. Last change was not correct to check fib_treeref because it accounts usage from other prefixes. Additionally, avoid replacement without error if new route is same, as Joonwoo Park suggests. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
This patch fix miss of check for report unrecognized HMAC Algorithm parameter. When AUTH is disabled, goto fall through path to report unrecognized parameter, else, just break Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9825 The inet_diag_lock_handler function uses ERR_PTR to encode errors but its callers were testing against NULL. This only happens when the only inet_diag modular user, DCCP, is not built into the kernel or available as a module. Also there was a problem with not dropping the mutex lock when a handler was not found, also fixed in this patch. This caused an OOPS and ss would then hang on subsequent calls, as &inet_diag_table_mutex was being left locked. Thanks to spike at ml.yaroslavl.ru for report it after trying 'ss -d' on a kernel that doesn't have DCCP available. This bug was introduced in cset d523a328 ("Fix inet_diag dead-lock regression"), after 2.6.24-rc3, so just 2.6.24 seems to be affected. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The recent UDP patch exposed this bug in the audit code. It was calling pskb_expand_head without increasing skb->truesize. The caller of pskb_expand_head needs to do so because that function is designed to be called in places where truesize is already fixed and therefore it doesn't update its value. Because the audit system is using it in a place where the truesize has not yet been fixed, it needs to update its value manually. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When ip_fragment has to hit the slow path the value of skb->truesize may go out of sync because we would have updated it without changing the packet length. This violates the constraints on truesize. This patch postpones the update of skb->truesize to prevent this. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 maximilian attems 提交于
on the last run overlooked that sfuzz triggable message. move the message to the corresponding comment. Signed-off-by: Nmaximilian attems <max@stro.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 maximilian attems 提交于
kill ref to old version and dup Linux. Signed-off-by: Nmaximilian attems <max@stro.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: NEric Van Hensbergen <ericvh@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
As pointed out by Adrian Bunk, commit 45c950e0 ("fix memory leak in netlabel code") caused a double-free when security_netlbl_sid_to_secattr() fails. This patch fixes this by removing the netlbl_secattr_destroy() call from that function since we are already releasing the secattr memory in selinux_netlbl_sock_setsid(). Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds support for combined mode algorithms with GCM being the first algorithm supported. Combined mode algorithms can be added through the xfrm_user interface using the new algorithm payload type XFRMA_ALG_AEAD. Each algorithms is identified by its name and the ICV length. For the purposes of matching algorithms in xfrm_tmpl structures, combined mode algorithms occupy the same name space as encryption algorithms. This is in line with how they are negotiated using IKE. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Now that ESP uses authenc we can turn on the support for async algorithms in IPsec. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch converts ESP to use the crypto_aead interface and in particular the authenc algorithm. This lays the foundations for future support of combined mode algorithms. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
New driver for wireless RNDIS devices. So far only known chip that uses wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that have RNDIS wireless physical medium. At least following devices are detected: Buffalo WLI-U2-KG125S U.S. Robotics USR5421 Belkin F5D7051 Linksys WUSB54GSv2 Linksys WUSB54GSC Asus WL169gE Eminent EM4045 BT Voyager 1055 Linksys WUSB54GSv1 U.S. Robotics USR5420 BUFFALO WLI-USB-G54 Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes for drivers/net/usb modules. Headers are moved because rndis_wlan will be outside drivers/net/usb in drivers/net/wireless and yet need these headers. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Add RNDIS physical medium checking into generic_rndis_bind() and also make rndis_host to be only bind on every medium except wireless. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Callback to signal link state changes from minidriver to 'subminidrivers'. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Function pointer is for 'subminidrivers' that need to do work on device right after minidriver has initialized hardware. For example, rndis_wlan setting device specific configuration parameters with OID_GEN_RNDIS_CONFIG_PARAMETER right after rndis_host has initialized hardware with RNDIS_INIT. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Add a private data pointer to usbnet for rndis_wlan module to use. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Export rndis_host functions and also rename rndis_bind() to generic_rndis_bind() for modules using rndis_host as base. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Split up rndis_host.c into rndis_host.h and rndis_base.c. This is done so that rndis_wlan can reuse common parts with rndis_host. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Use wlan device name for RNDIS wireless devices. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NBjorge Dijkstra <bjd@jooz.net> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-