smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.

Similar change for ->getxattr() had been done in commit ce23e640.  Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

preparation for similar switch in ->setxattr() (see the next commit for
rationale).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The ones that are taking it exclusive, that is...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull vfs iov_iter regression fix from Al Viro:
 "Fix for braino in 'fold checks into iterate_and_advance()'"

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  do "fold checks into iterate_and_advance()" right

Pull vfs xattr regression fixes from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make xattr_resolve_handlers() safe to use with NULL ->s_xattr
  xattr: Fail with -EINVAL for NULL attribute names

Pull ACPI fix from Rafael Wysocki:
 "Additional ACPI update for v4.7-rc1

  Just one fix for incorrect async_synchronize_cookie() usage in the
  ACPI battery driver (Chris Wilson)"

* tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / battery: Correctly serialise with the pending async probe

Pull more power management updates from Rafael Wysocki:
 "These are two stable-candidate fixes (PM core, cpuidle) and a bunch of
  cpufreq cleanups.

  Specifics:

   - Stable-candidate cpuidle fix to make it check the right variable
     when deciding whether or not to enable interrupts on the local CPU
     so as to avoid enabling iterrupts too early in some cases if the
     system has both coupled and per-core idle states (Daniel Lezcano).

   - Stable-candidate PM core fix to make it handle failures at the
     "late suspend" stage of device suspend consistently for all devices
     regardless of whether or not async suspend/resume is enabled for
     them (Rafael Wysocki).

   - Cleanups in the cpufreq core, the schedutil governor and the
     intel_pstate driver (Rafael Wysocki, Pankaj Gupta, Viresh Kumar)"

* tag 'pm-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / sleep: Handle failures in device_suspend_late() consistently
  cpufreq: schedutil: Improve prints messages with pr_fmt
  cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
  cpufreq: simplified goto out in cpufreq_register_driver()
  cpufreq: governor: CPUFREQ_GOV_STOP never fails
  cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails
  intel_pstate: Simplify conditional in intel_pstate_set_policy()

the only case when we should skip the iterate_and_advance() guts
is when nothing's left in the iterator, _not_ just when requested
amount is 0.  Said guts will do nothing in the latter case anyway;
the problem we tried to deal with in the aforementioned commit is
that when there's nothing left *and* the amount requested is 0,
we might end up deferencing one iovec too many; the value we fetch
from there is discarded in that case, but theoretically it might
oops if the iovec array ends exactly at the end of page with the
next page not mapped.

Bailing out on zero size requested had an unexpected side effect -
zero-length segment in the beginning of iovec array ended up
throwing do_loop_readv_writev() into infinite spin; we do not
advance past the empty segment at all.  Reproducer is trivial:
echo '#include <sys/uio.h>' >a.c
echo 'main() {char c; struct iovec v[] = {{&c,0},{&c,1}}; readv(0,v,2);}' >>a.c
cc a.c && ./a.out </proc/uptime

which should end up with the process not hanging.  Probably ought to
go into LTP or xfstests...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Commit 98e9cb57 improved the xattr name checks in xattr_resolve_name but
didn't update the NULL attribute name check appropriately, so NULL
attribute names lead to NULL pointer dereferences.  Turn that into
-EINVAL results instead.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
  fs/xattr.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* acpi-battery:
  ACPI / battery: Correctly serialise with the pending async probe

* pm-cpufreq:
  cpufreq: schedutil: Improve prints messages with pr_fmt
  cpufreq: simplified goto out in cpufreq_register_driver()
  cpufreq: governor: CPUFREQ_GOV_STOP never fails
  cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails
  intel_pstate: Simplify conditional in intel_pstate_set_policy()

* pm-cpuidle:
  cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()

* pm-core:
  PM / sleep: Handle failures in device_suspend_late() consistently

Merge tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes introduces an atomic API to the PWM subsystem.
  This is influenced by the DRM atomic API that was introduced a while
  back, though it is obviously a lot simpler.  The fundamental idea
  remains the same, though: drivers provide a single callback to
  implement the atomic configuration of a PWM channel.

  As a side-effect the PWM subsystem gains the ability for initial state
  retrieval, so that the logical state mirrors that of the hardware.
  Many use-cases don't care about this, but for others it is essential.

  These new features require changes in all users, which these patches
  take care of.  The core is transitioned to use the atomic callback if
  available and provides a fallback mechanism for other drivers.

  Changes to transition users and drivers to the atomic API are
  postponed to v4.8"

* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
  pwm: Add information about polarity, duty cycle and period to debugfs
  pwm: Switch to the atomic API
  pwm: Update documentation
  pwm: Add core infrastructure to allow atomic updates
  pwm: Add hardware readout infrastructure
  pwm: Move the enabled/disabled info into pwm_state
  pwm: Introduce the pwm_state concept
  pwm: Keep PWM state in sync with hardware state
  ARM: Explicitly apply PWM config extracted from pwm_args
  drm: i915: Explicitly apply PWM config extracted from pwm_args
  input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
  input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
  backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
  backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
  backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
  backlight: pwm_bl: Use pwm_get_args() where appropriate
  fbdev: ssd1307fb: Use pwm_get_args() where appropriate
  regulator: pwm: Use pwm_get_args() where appropriate
  leds: pwm: Use pwm_get_args() where appropriate
  input: misc: max77693: Use pwm_get_args() where appropriate
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - add support for Fintek F81865 Super-IO chip

 - add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based
   SoCs from Renesas

 - octeon: Handle the FROZEN hot plug notifier actions

 - f71808e_wdt fixes and cleanups

 - some small improvements in code and documentation

* git://www.linux-watchdog.org/linux-watchdog:
  MAINTAINERS: Add file patterns for watchdog device tree bindings
  Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
  watchdog: shwdt: Use setup_timer()
  watchdog: cpwd: Use setup_timer()
  arm64: defconfig: enable Renesas Watchdog Timer
  watchdog: renesas-wdt: add driver
  watchdog: remove error message when unable to allocate watchdog device
  watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
  watchdog: f71808e_wdt: Fix typo
  watchdog: f71808e_wdt: Add F81865 support
  watchdog: sp5100_tco: properly check for new register layouts
  watchdog: core: Fix circular locking dependency
  watchdog: core: fix trivial typo in a comment
  watchdog: hpwdt: Adjust documentation to match latest kernel module parameters.
  watchdog: imx2_wdt: add external reset support via dt prop
  watchdog: octeon: Handle the FROZEN hot plug notifier actions.
  watchdog: qcom: Report reboot reason

Pull VFIO updates from Alex Williamson:

 - Hide INTx on certain known broken devices (Alex Williamson)

 - Additional backdoor reset detection (Alex Williamson)

 - Remove unused iommudata reference (Alexey Kardashevskiy)

 - Use cfg_size to avoid probing extended config space (Alexey
   Kardashevskiy)

* tag 'vfio-v4.7-rc1' of git://github.com/awilliam/linux-vfio:
  vfio_pci: Test for extended capabilities if config space > 256 bytes
  vfio_iommu_spapr_tce: Remove unneeded iommu_group_get_iommudata
  vfio/pci: Add test for BAR restore
  vfio/pci: Hide broken INTx support from user

Pull header warning fix from Dave Airlie:
 "Here is the C++ guards warning fix from Arnd"

[ Background: there are 'extern "C" { }' guards in include/uapi for the
  GPU headers.

  They should arguably be wrapped somehow, but as it is they caused
  checkpatch to warn because it would trigger on the 'extern' and think
  it's exporting a function or variable from the kernel to user space.

  This just fixes checkpatch.  Whether we wrap the C++ guards some way
  in the future will be an independent issue. ]

* tag 'drm-4.7-rc1-headers-fix' of git://people.freedesktop.org/~airlied/linux:
  headers_check: don't warn about c++ guards

Pull parisc updates from Helge Deller:

 - Add native high-resolution timing code for sched_clock() and other
   timing functions based on the processor internal cr16 cycle counters

 - Add syscall tracepoint support

 - Add regset support

 - Speed up get_user() and put_user() functions

 - Updated futex.h to match generic implementation (John David Anglin)

 - A few smaller ftrace build fixes

 - Fixed thuge-gen kernel self test to utilize architectured MAP_HUGETLB
   value

 - Added parisc architecture to seccomp_bpf kernel self test

 - Various typo fixes (Andrea Gelmini)

* 'parisc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Whitespace cleanups in unistd.h
  parisc: Use long jump to reach ftrace_return_to_handler()
  parisc: Fix typo in fpudispatch.c
  parisc: Fix typos in eisa_eeprom.h
  parisc: Fix typo in ldcw.h
  parisc: Fix typo in pdc.h
  parisc: Update futex.h to match generic implementation
  parisc: Merge ftrace C-helper and assembler functions into .text.hot section
  selftests/thuge-gen: Use platform specific MAP_HUGETLB value
  parisc: Add native high-resolution sched_clock() implementation
  parisc: Add ARCH_TRACEHOOK and regset support
  parisc: Add 64bit get_user() and put_user() for 32bit kernel
  parisc: Simplify and speed up get_user() and put_user()
  parisc: Add syscall tracepoint support

Clean up whitespaces and mark unused syscalls as such.
Signed-off-by: NHelge Deller <deller@gmx.de>

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a first set of bug fixes on top of what was merged for 4.7.

  Two patches for lpc32xx address a harmless build warning that was just
  introduced, one patch for the mediatek soc driver fixes a warning for
  arm64, and the pxa changes are minor cleanups that should have been
  part of the original pull requests but that I forgot to apply to the
  cleanup-fixes branch earlier"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: lpc32xx: fix NR_IRQS confict
  ARM: lpc32xx: remove legacy irq controller driver
  soc: mtk-pmic-wrap: avoid integer overflow warning
  ARM: pxa: Remove CLK_IS_ROOT
  ARM: pxa: activate pinctrl for device-tree machines

Pull ARM SoC late DT updates from Arnd Bergmann:
 "This is a collection of a few late fixes and other misc stuff that had
  dependencies on things being merged from other trees.

  The Renesas R-Car power domain handling, and the Nvidia Tegra USB
  support both hand notable changes that required changing the DT
  binding in a way that only provides compatibility with old DT blobs on
  new kernels but not vice versa.  As a consequence, the DT changes are
  based on top of the driver changes and are now in this branch.

  For NXP i.MX and Samsung Exynos, the changes in here depend on other
  changes that got merged through the clk maintainer tree"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3
  ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC
  ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC
  ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3
  ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
  ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato
  ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes
  ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210
  ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12
  ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12
  ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250
  ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk
  ARM: dts: exynos: Add DMC bus node for Exynos3250
  ARM: tegra: Enable XUSB on Nyan
  ARM: tegra: Enable XUSB on Jetson TK1
  ARM: tegra: Enable XUSB on Venice2
  ARM: tegra: Add Tegra124 XUSB controller
  ARM: tegra: Move Tegra124 to the new XUSB pad controller binding
  ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
  ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
  ...

Pull asm-generic cleanup from Arnd Bergmann:
 "I have only one patch for asm-generic in this release, this one is
  from James Hogan and updates the generic system call table for
  renameat2 so we don't need to provide both renameat and renameat2 in
  newly added architectures"

* tag 'asm-generic-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: Drop renameat syscall from default list

Pull nfsd updates from Bruce Fields:
 "A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
  Lever"

* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
  sunrpc: fix stripping of padded MIC tokens
  svcrpc: autoload rdma module
  svcrdma: Generalize svc_rdma_xdr_decode_req()
  svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
  svcrdma: Drain QP before freeing svcrdma_xprt
  svcrdma: Post Receives only for forward channel requests
  svcrdma: Remove superfluous line from rdma_read_chunks()
  svcrdma: svc_rdma_put_context() is invoked twice in Send error path
  svcrdma: Do not add XDR padding to xdr_buf page vector
  svcrdma: Support IPv6 with NFS/RDMA
  nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
  Remove unnecessary allocation

Pull ext4 updates from Ted Ts'o:
 "Fix a number of bugs, most notably a potential stale data exposure
  after a crash and a potential BUG_ON crash if a file has the data
  journalling flag enabled while it has dirty delayed allocation blocks
  that haven't been written yet.  Also fix a potential crash in the new
  project quota code and a maliciously corrupted file system.

  In addition, fix some DAX-specific bugs, including when there is a
  transient ENOSPC situation and races between writes via direct I/O and
  an mmap'ed segment that could lead to lost I/O.

  Finally the usual set of miscellaneous cleanups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: pre-zero allocated blocks for DAX IO
  ext4: refactor direct IO code
  ext4: fix race in transient ENOSPC detection
  ext4: handle transient ENOSPC properly for DAX
  dax: call get_blocks() with create == 1 for write faults to unwritten extents
  ext4: remove unmeetable inconsisteny check from ext4_find_extent()
  jbd2: remove excess descriptions for handle_s
  ext4: remove unnecessary bio get/put
  ext4: silence UBSAN in ext4_mb_init()
  ext4: address UBSAN warning in mb_find_order_for_block()
  ext4: fix oops on corrupted filesystem
  ext4: fix check of dqget() return value in ext4_ioctl_setproject()
  ext4: clean up error handling when orphan list is corrupted
  ext4: fix hang when processing corrupted orphaned inode list
  ext4: remove trailing \n from ext4_warning/ext4_error calls
  ext4: fix races between changing inode journal mode and ext4_writepages
  ext4: handle unwritten or delalloc buffers before enabling data journaling
  ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart()
  ext4: do not ask jbd2 to write data for delalloc buffers
  jbd2: add support for avoiding data writes during transaction commits
  ...

With the change to sparse IRQs, the lpc32xx platform gets a warning about
conflicting macros:

In file included from arch/arm/mach-lpc32xx/irq.c:31:0:
arch/arm/mach-lpc32xx/include/mach/irqs.h:115:0: warning: "NR_IRQS" redefined
 #define NR_IRQS    96
arch/arm/include/asm/irq.h:9:0: note: this is the location of the previous definition
 #define NR_IRQS NR_IRQS_LEGACY

One such instance was in the old irq driver that is now removed by
the previous patch, but any other file including mach/irqs.h still
has the issue. Since none of them use this constant, we can just
remove the old definition.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 8cb17b5e ("irqchip: Add LPC32xx interrupt controller driver")

New NXP LPC32xx irq chip driver is used instead of a legacy one.

[this also fixes a harmless build warning about the NR_IRQS redefinition]
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Acked-by: NSylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pull spi updates from Mark Brown:
 "Another quiet release for SPI, almost entirely driver specific changes
  with the diffstat dominated by two new drivers which are about two
  thirds of it in terms of lines of code:

   - new drivers for PIC32 standard and SQI controllers
   - the Cadence driver has had runtime PM support added and quite a few
     fixes and cleanups
   - flash-specific accelerated path support now has a feature query
     interface
   - the pxa2xx driver has been moved to use the core DMA mapping support"

* tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits)
  spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'
  spi: dw-pci: Spelling s/paltforms/platforms/g
  spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup
  spi: Fix simple typo s/impelment/implement
  spi: rockchip: potential NULL dereference on error
  spi: zynqmp: disable clocks in error paths
  spi: Drop unnecessary dependencies on relaxed I/O accessors
  spi: qup: Add spi_master_put in remove function
  spi: qup: Handle clocks in pm_runtime suspend and resume
  spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths
  spi: st-ssc4: Allow compile test build
  spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
  spi: davinci: Use dma_request_chan() for requesting DMA channel
  spi: pic32: Fix checking return value of devm_ioremap_resource
  spi: spi-fsl-dspi: Update DT binding documentation
  spi: Drop duplicate code to set master->dev.parent
  spi: pic32: Set proper bits_per_word_mask
  spi: return error if kmap'd buffers passed to spi_map_buf()
  spi: core: add hook flash_read_supported to spi_master
  spi: pic32-sqi: silence array overflow warning
  ...

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

Pull xen bug fixes from David Vrabel.

* tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: use same main loop for counting and remapping pages
  xen/events: Don't move disabled irqs
  xen/x86: actually allocate legacy interrupts on PV guests
  Xen: don't warn about 2-byte wchar_t in efi
  xen/gntdev: reduce copy batch size to 16
  xen/x86: don't lose event interrupts

Pull virtio updates from Michael Tsirkin:
 "Looks like a quiet cycle for virtio.  There's a new inorder option for
  the ringtest tool, and a bugfix for balloon for ppc platforms when
  using virtio 1 mode"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  ringtest: pass buf != NULL
  virtio_balloon: fix PFN format for virtio-1
  virtio: add inorder option

Pull nios2 update from Ley Foon Tan:
 - add order-only DTC dependency to %.dtb target
 - fix libgcc location detection

* tag 'nios2-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Add order-only DTC dependency to %.dtb target
  nios2: Fix libgcc location detection

Pull Microblaze updates from Michal Simek:

 - Wire-up new syscalls

 - Fix link error

* tag 'microblaze-4.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: pci: export isa_io_base to fix link errors
  microblaze: Wire up userfaultfd, membarrier, mlock2 syscalls

Instead of having two functions for cycling through the E820 map in
order to count to be remapped pages and remap them later, just use one
function with a caller supplied sub-function called for each region to
be processed. This eliminates the possibility of a mismatch between
both loops which showed up in certain configurations.
Suggested-by: NEd Swierk <eswierk@skyportsystems.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Commit ff1e22e7 ("xen/events: Mask a moving irq") open-coded
irq_move_irq() but left out checking if the IRQ is disabled. This broke
resuming from suspend since it tries to move a (disabled) irq without
holding the IRQ's desc->lock. Fix it by adding in a check for disabled
IRQs.

The resulting stacktrace was:
kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31!
invalid opcode: 0000 [#1] SMP
Modules linked in: xenfs xen_privcmd ...
CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016
task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000
RIP: 0010:[<ffffffff810e26e2>]  [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0
RSP: 0018:ffff88003d7bfc50  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8
RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000
R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0
R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff
FS:  0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0
 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009
 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66
Call Trace:
 [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0
 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150
 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360
 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180
 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0
 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80
 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140
 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220
 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160
 [<ffffffff810a3830>] ? sort_range+0x30/0x30
 [<ffffffff810a0588>] kthread+0xd8/0xf0
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

b4ff8389 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org

The XEN UEFI code has become available on the ARM architecture
recently, but now causes a link-time warning:

ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail

This seems harmless, because the efi code only uses 2-byte
characters when interacting with EFI, so we don't pass on those
strings to elsewhere in the system, and we just need to
silence the warning.

It is not clear to me whether we actually need to build the file
with the -fshort-wchar flag, but if we do, then we should also
pass --no-wchar-size-warning to the linker, to avoid the warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")

IOCTL_GNTDEV_GRANT_COPY batches copy operations to reduce the number
of hypercalls.  The stack is used to avoid a memory allocation in a
hot path. However, a batch size of 24 requires more than 1024 bytes of
stack which in some configurations causes a compiler warning.

    xen/gntdev.c: In function ‘gntdev_ioctl_grant_copy’:
    xen/gntdev.c:949:1: warning: the frame size of 1248 bytes is
    larger than 1024 bytes [-Wframe-larger-than=]

This is a harmless warning as there is still plenty of stack spare,
but people keep trying to "fix" it.  Reduce the batch size to 16 to
reduce stack usage to less than 1024 bytes.  This should have minimal
impact on performance.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

On slow platforms with unreliable TSC, such as QEMU emulated machines,
it is possible for the kernel to request the next event in the past. In
that case, in the current implementation of xen_vcpuop_clockevent, we
simply return -ETIME. To be precise the Xen returns -ETIME and we pass
it on. However the result of this is a missed event, which simply causes
the kernel to hang.

Instead it is better to always ask the hypervisor for a timer event,
even if the timeout is in the past. That way there are no lost
interrupts and the kernel survives. To do that, remove the
VCPU_SSHOTTMR_future flag.
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>
Acked-by: NJuergen Gross <jgross@suse.com>

A recent addition to the DRM tree for 4.7 added 'extern "C"' guards
for c++ to all the DRM headers, and that now causes warnings
in 'make headers_check':

usr/include/drm/amdgpu_drm.h:38: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm.h:63: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm.h:699: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm_fourcc.h:30: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm_mode.h:33: userspace cannot reference function or variable defined in the kernel
usr/include/drm/drm_sarea.h:38: userspace cannot reference function or variable defined in the kernel
usr/include/drm/exynos_drm.h:21: userspace cannot reference function or variable defined in the kernel
usr/include/drm/i810_drm.h:7: userspace cannot reference function or variable defined in the kernel

This changes the headers_check.pl script to not warn about this.
I'm listing the merge commit as introducing the problem, because
there are several patches in this branch that each do this for
one file.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 7c10ddf8 ("Merge branch 'drm-uapi-extern-c-fixes' of https://github.com/evelikov/linux into drm-next")
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>