- 20 8月, 2008 1 次提交
-
-
由 Josef Bacik 提交于
When trying to resize an ext4 fs and you run out of reserved gdt blocks, you get an error that doesn't actually tell you what went wrong, it just says that the gdb it picked is not correct, which is the case since you don't have any reserved gdt blocks left. This patch adds a check to make sure you have reserved gdt blocks to use, and if not prints out a more relevant error. Signed-off-by: NJosef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Cc: Andreas Dilger <adilger@sun.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 16 8月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
In ext4_ext_truncate(), we should use the more generic ext4_discard_reservations() call so we do the right thing when the filesystem is mounted with the nomballoc option. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NMingming Cao <cmm@us.ibm.com>
-
- 20 8月, 2008 2 次提交
-
-
由 Theodore Ts'o 提交于
This fixes a bug where readdir() would return a directory entry twice if there was a hash collision in an hash tree indexed directory. Signed-off-by: NEugene Dashevsky <eugene@ibrix.com> Signed-off-by: NMike Snitzer <msnitzer@ibrix.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Mingming Cao 提交于
Ext4 will release the reserved blocks for delayed allocations when inode is truncated/unlinked. If there is no reserved block at all, we shouldn't need to do so. But current code still tries to release the reserved blocks regardless whether the counters's value is 0. Continue to do that causes the later calculation to go wrong and a kernel BUG_ON() caught that. This doesn't happen for extent-based files, as the calculation for 0 reserved blocks was right for extent based file. This patch fixed the kernel BUG() due to above reason. It adds checks for 0 to avoid unnecessary release and fix calculation for non-extent files. Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 14 8月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
We need to call ext4_discard_reservation() earlier in ext4_truncate(), to avoid a BUG() in ext4_mb_return_to_preallocation(), which is called (ultimately) by ext4_free_blocks(). So we must ditch the blocks on i_prealloc_list before we start freeing the data blocks. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 20 8月, 2008 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
When using fallocate the buffer_heads are marked unwritten and unmapped. We need to map them in the writepages after a get_block. Otherwise we split the uninit extents, but never write the content to disk. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 13 8月, 2008 34 次提交
-
-
由 Linus Torvalds 提交于
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: fs/nfsd/export.c: Adjust error handling code involving auth_domain_put MAINTAINERS: mention lockd and sunrpc in nfs entries lockd: trivial sparse endian annotations
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Discard double CQE for one WR IB/ehca: Check idr_find() return value IB/ehca: Repoll CQ on invalid opcode IB/ehca: Rename goto label in ehca_poll_cq_one() IB/ehca: Update qp_state on cached modify_qp() IPoIB/cm: Use vmalloc() to allocate rx_rings
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] use bcd2bin/bin2bcd [IA64] Ensure cpu0 can access per-cpu variables in early boot code
-
由 Bernhard Walle 提交于
Various cleanup the drivers/firmware/memmap (after review by AKPM): - fix kdoc to conform to the standard - move kdoc from header to implementation files - remove superfluous WARN_ON() after kmalloc() - WARN_ON(x); if (!x) -> if(!WARN_ON(x)) - improve some comments Signed-off-by: NBernhard Walle <bwalle@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Clouter 提交于
My Sun Netra T1 AC200 has one of these... bit harsh not letting me use it and all :) ========== alex@woodchuck:~$ lspci -nn 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) 01:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101] 01:05.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO GEM [108e:1101] (rev 01) 01:05.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01) 01:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533] 01:0c.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS [108e:1100] (rev 01) 01:0c.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO GEM [108e:1101] (rev 01) 01:0c.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01) 01:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3) 02:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 [1000:000b] (rev 07) 02:08.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 [1000:000b] (rev 07) ========== Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Abbott 提交于
The attached patch seems to already exist in a number of branches -- it keeps popping up on Google for me, and is certainly already in Debian -- but is strangely absent from mainstream. The problem appears to be that the patched file ends up as part of the target toolchain, but unfortunately the gcc constant folding doesn't appear to eliminate the __invalid_size_argument_for_IOC value early enough. Certainly compiling C++ programs which use _IO... macros as constants fails without this patch. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix printf format type warnings (seen on alpha & ia64): Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 6 has type '__u64' Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 7 has type '__u64' Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 8 has type '__u64' Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 9 has type '__u64' Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 12 has type '__u64' Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 13 has type '__u64' Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 16 has type '__u64' Documentation/accounting/getdelays.c:206: warning: format '%15llu' expects type 'long long unsigned int', but argument 17 has type '__u64' Documentation/accounting/getdelays.c:214: warning: format '%15llu' expects type 'long long unsigned int', but argument 4 has type '__u64' Documentation/accounting/getdelays.c:214: warning: format '%15llu' expects type 'long long unsigned int', but argument 5 has type '__u64' Documentation/accounting/getdelays.c:221: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type '__u64' Documentation/accounting/getdelays.c:221: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type '__u64' Documentation/accounting/getdelays.c:221: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type '__u64' Documentation/accounting/getdelays.c:221: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type '__u64' Documentation/accounting/getdelays.c:221: warning: format '%llu' expects type 'long long unsigned int', but argument 6 has type '__u64' Documentation/accounting/getdelays.c:236: warning: 'cmd_type' may be used uninitialized in this function Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix differing signedness warning: Documentation/pcmcia/crc32hash.c:29: warning: pointer targets in passing argument 1 of 'crc32' differ in signedness Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NDominik Brodowski <linux@dominikbrodowski.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Documentation/networking/ifenslave.c:1084: warning: pointer targets in assignment differ in signedness >From include/linux/socket.h: * 1003.1g requires sa_family_t and that sa_data is char. and from SUSv3: (http://www.opengroup.org/onlinepubs/009695399/basedefs/sys/socket.h.html) The <sys/socket.h> header shall define the sockaddr structure that includes at least the following members: sa_family_t sa_family Address family. char sa_data[] Socket address (variable-length data). <end SUSv3> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Add MODULE_LICENSE() to DocBook/procfs_example.c since modpost complained about a missing license there. Remove tty procfs removal since the creation was deleted long ago (http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=5ad9cb65e9b15e5b83e2dd1c10a4bcaccc4ec644). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: <J.A.K.Mouw@its.tudelft.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Currently source files in the Documentation/ sub-dir can easily bit-rot since they are not generally buildable, either because they are hidden in text files or because there are no Makefile rules for them. This needs to be fixed so that the source files remain usable and good examples of code instead of bad examples. Add the ability to build source files that are in the Documentation/ dir. Add to Kconfig as "BUILD_DOCSRC" config symbol. Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the Documentation/ sources. Or enable BUILD_DOCSRC in the *config system. However, this symbol depends on HEADERS_CHECK since the header files need to be installed (for userspace builds). Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32, sparc64, powerpc, sh, m68k, & mips. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Reviewed-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harvey Harrison 提交于
Collect the implementations from include/linux/byteorder/swab.h, swabb.h in swab.h The functionality provided covers: u16 swab16(u16 val) - return a byteswapped 16 bit value u32 swab32(u32 val) - return a byteswapped 32 bit value u64 swab64(u64 val) - return a byteswapped 64 bit value u32 swahw32(u32 val) - return a wordswapped 32 bit value u32 swahb32(u32 val) - return a high/low byteswapped 32 bit value Similar to above, but return swapped value from a naturally-aligned pointer u16 swab16p(u16 *p) u32 swab32p(u32 *p) u64 swab64p(u64 *p) u32 swahw32p(u32 *p) u32 swahb32p(u32 *p) Similar to above, but swap the value in-place (in-situ) void swab16s(u16 *p) void swab32s(u32 *p) void swab64s(u64 *p) void swahw32s(u32 *p) void swahb32s(u32 *p) Arches can override any of these with an optimized version by defining an inline in their asm/byteorder.h (example given for swab16()): u16 __arch_swab16() {} #define __arch_swab16 __arch_swab16 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Switch /proc/irq/*/smp_affinity , /proc/irq/default_smp_affinity to seq_files. cat(1) reads with 1024 chunks by default, with high enough NR_CPUS, there will be -EINVAL. As side effect, there are now two less users of the ->read_proc interface. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Paul Jackson <pj@sgi.com> Cc: Mike Travis <travis@sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Short enough reads from /proc/irq/*/smp_affinity return -EINVAL for no good reason. This became noticed with NR_CPUS=4096 patches, when length of printed representation of cpumask becase 1152, but cat(1) continued to read with 1024-byte chunks. bitmap_scnprintf() in good faith fills buffer, returns 1023, check returns -EINVAL. Fix it by switching to seq_file, so handler will just fill buffer and doesn't care about offsets, length, filling EOF and all this crap. For that add seq_bitmap(), and wrappers around it -- seq_cpumask() and seq_nodemask(). Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NPaul Jackson <pj@sgi.com> Cc: Mike Travis <travis@sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Weiyi 提交于
Removed duplicated #include <linux/quotaops.h> in fs/reiserfs/super.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
The `size' argument was removed. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Weiyi 提交于
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Weiyi 提交于
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yi Yang 提交于
Fix wrong conversion function used by strict_strtou* Signed-off-by: NYi Yang <yi.y.yang@intel.com> Reported-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Helt 提交于
Adjust and honor the vc_scrl_erase_char for 256 and 512 character fonts. It fixes the issue with disappearing cursor during scrolling (http://bugzilla.kernel.org/show_bug.cgi?id=11258). The issue was reported and tracked by Peter Hanzel. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Reported-by: NPeter Hanzel <hanzelpeter@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Haavard Skinnemoen 提交于
Specify how much physically continuous, DMA capable memory will be allocated at driver initialization time. This allow to create framebuffer device with larger virtual resolution. Combine with y-panning this can be used to implement double buffering acceleration method. Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Haavard Skinnemoen 提交于
Panning in the y-direction can be done by simply changing the DMA base address. This code is already in place, but FBIOPAN_DISPLAY will currently fail because ypanstep is 0. Set ypanstep to 1 to indicate that we do support y-panning and also set the necessary acceleration flags on AT91 (AVR32 already have them.) Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
The legacy i2c model is going away soon, so switch to the new model. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
Clean up the use of structure templates in i2c-matroxfb. In this case it's more efficient to initialize the few fields we need individually. This makes i2c-matroxfb.ko 16% smaller on my system. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
I broke an error path with d03c21ec, sorry about that. The machine will crash if the i2c_attach_client() or maven_init_client() calls fail, although nobody has yet reported this happening. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 MinChan Kim 提交于
Signed-off-by: NMinChan Kim <minchan.kim@gmail.com> Acked-by: NChristoph Lameter <cl@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix preprocessor symbol so that sparse sees it and does not generate errors: drivers/misc/sgi-gru/grutables.h:286:2: error: "Unsupported architecture" drivers/misc/sgi-gru/grutables.h:286:2: error: "Unsupported architecture" drivers/misc/sgi-gru/grutables.h:286:2: error: "Unsupported architecture" drivers/misc/sgi-gru/grutables.h:286:2: error: "Unsupported architecture" drivers/misc/sgi-gru/grutlbpurge.c:185:11: error: undefined identifier 'GRUREGION' drivers/misc/sgi-gru/grutables.h:286:2: error: "Unsupported architecture" drivers/misc/sgi-gru/grutables.h:286:2: error: "Unsupported architecture" Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Miller 提交于
Some chips appear to have the 2D engine hang during screen redraw, typically in a sequence of copyarea operations. This appear to be solved by adding a flush of the engine destination pixel cache and waiting for the engine to be idle before issuing the accel operation. The performance impact seems to be fairly small. Here is a trace on an RV370 (PCI device ID 0x5b64), it records the RBBM_STATUS register, then the source x/y, destination x/y, and width/height used for the copy: ---------------------------------------- radeonfb_prim_copyarea: STATUS[00000140] src[210:70] dst[210:60] wh[a0:10] radeonfb_prim_copyarea: STATUS[00000140] src[2b8:70] dst[2b8:60] wh[88:10] radeonfb_prim_copyarea: STATUS[00000140] src[348:70] dst[348:60] wh[40:10] radeonfb_prim_copyarea: STATUS[80020140] src[390:70] dst[390:60] wh[88:10] radeonfb_prim_copyarea: STATUS[8002613f] src[40:80] dst[40:70] wh[28:10] radeonfb_prim_copyarea: STATUS[80026139] src[a8:80] dst[a8:70] wh[38:10] radeonfb_prim_copyarea: STATUS[80026133] src[e8:80] dst[e8:70] wh[80:10] radeonfb_prim_copyarea: STATUS[8002612d] src[170:80] dst[170:70] wh[30:10] radeonfb_prim_copyarea: STATUS[80026127] src[1a8:80] dst[1a8:70] wh[8:10] radeonfb_prim_copyarea: STATUS[80026121] src[1b8:80] dst[1b8:70] wh[88:10] radeonfb_prim_copyarea: STATUS[8002611b] src[248:80] dst[248:70] wh[68:10] ---------------------------------------- When things are going fine the copies complete before the next ROP is even issued, but all of a sudden the 2D unit becomes active (bit 17 in RBBM_STATUS) and the FIFO retry (bit 13) and FIFO pipeline busy (bit 14) are set as well. The FIFO begins to backup until it becomes full. What happens next is the radeon_fifo_wait() times out, and we access the chip illegally leading to a bus error which usually wedges the box. None of this makes it to the console screen, of course :-) radeon_fifo_wait() should be modified to reset the accelerator when this timeout happens instead of programming the chip anyways. ---------------------------------------- radeonfb: FIFO Timeout ! ERROR(0): Cheetah error trap taken afsr[0010080005000000] afar[000007f900800e40] TL1(0) ERROR(0): TPC[595114] TNPC[595118] O7[459788] TSTATE[11009601] ERROR(0): TPC<radeonfb_copyarea+0xfc/0x248> ERROR(0): M_SYND(0), E_SYND(0), Privileged ERROR(0): Highest priority error (0000080000000000) "Bus error response from system bus" ERROR(0): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] ERROR(0): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000] ERROR(0): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[00\ ERROR(0): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000] ERROR(0): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000] ERROR(0): E-cache idx[800e40] tag[000000000e049f4c] ERROR(0): E-cache data0[fffff8127d300180] data1[00000000004b5384] data2[0000000000000000] data3[0000000000000000] Ker:xnel panic - not syncing: Irrecoverable deferred error trap. ---------------------------------------- Another quirk is that these copyarea calls will not happen until the first drivers/char/vt.c:redraw_screen() occurs. This will only happen if you 1) VC switch or 2) run "consolechars" or 3) unblank the screen. This seems to happen because until a redraw_screen() the screen scrolling method used by fbcon is not finalized yet. I've seen this with other fb drivers too. So if all you do is boot straight into X you will never see this bug on the relevant chips. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Whitcroft 提交于
[Andrew this should replace the previous version which did not check the returns from the region prepare for errors. This has been tested by us and Gerald and it looks good. Bah, while reviewing the locking based on your previous email I spotted that we need to check the return from the vma_needs_reservation call for allocation errors. Here is an updated patch to correct this. This passes testing here.] Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Tested-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Whitcroft 提交于
In the normal case, hugetlbfs reserves hugepages at map time so that the pages exist for future faults. A struct file_region is used to track when reservations have been consumed and where. These file_regions are allocated as necessary with kmalloc() which can sleep with the mm->page_table_lock held. This is wrong and triggers may-sleep warning when PREEMPT is enabled. Updates to the underlying file_region are done in two phases. The first phase prepares the region for the change, allocating any necessary memory, without actually making the change. The second phase actually commits the change. This patch makes use of this by checking the reservations before the page_table_lock is taken; triggering any necessary allocations. This may then be safely repeated within the locks without any allocations being required. Credit to Mel Gorman for diagnosing this failure and initial versions of the patch. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Tested-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Parag Warudkar 提交于
Signed-off-by: NParag Warudkar <parag.warudkar@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-