This updates the various boards for some of the recent I/O routine
updates.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

There was a bug that got introduced when the split ptlock changes
went in where mm could be unintialized for user mappings, this
fixes it up..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We need this set to something sensible anywhere were we have
an aliasing dcache..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

ioremap() overhaul. Add support for transparent PMB mapping, get rid of
p3_ioremap(), etc. Also drop ioremap() and iounmap() routines from the
machvec, as everyone can use the generic ioremap() API instead. For PCI
memory apertures and other special cases, use the pci_iomap() API, as
boards are already required to get the mapping right there.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Cleanup of page table allocators, using generic folded PMD and PUD
helpers. TLB flushing operations are moved to a more sensible spot.

The page fault handler is also optimized slightly, we no longer waste
cycles on IRQ disabling for flushing of the page from the ITLB, since
we're already under CLI protection by the initial exception handler.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some modules seem to need this, so we export it..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add support for 32-bit physical addressing through the SH-4A
Privileged Space Mapping Buffer (PMB).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add support for the titan board.
Signed-off-by: NJamie Lenehan <lenehan@twibble.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

A synco is needed before we jump to start_kernel().

While we're at it, also move the sh_cpu_init() jump until after
we've zeroed BSS, as this has caused some undesirable results
in sh_cpu_init().
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Currently when making changes to control registers, we
typically need some time for changes to take effect (8
nops, generally).  However, for sh4a we simply need to
do an icbi..

This is a simple patch for implementing a general purpose
ctrl_barrier() which functions as a control register write
barrier. There's some additional documentation in the patch
itself, but it's pretty self explanatory.

There were also some places where we were not doing the
barrier, which didn't seem to have any adverse effects on
legacy parts, but certainly did on sh4a. It's safer to have
the barrier in place for legacy parts as well in these cases,
though this does make flush_tlb_all() more expensive (by an
order of 8 nops).  We can ifdef around the flush_tlb_all()
case for now if it's clear that all legacy parts won't have
a problem with this.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add CPU_HAS_PTEA, refactor some of the cpu flag settings.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds support for the I-O DATA Landisk.
Signed-off-by: Nkogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Drop virt_to_bus() from sg_dma_address() so libata builds.
While we're at it, move sg_dma_address() and sg_dma_len()
from pci.h to scatterlist.h.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

There's a bug in the Hitachi SuperH csum_partial_copy_generic()
implementation.  If the supplied length is 1 (and several alignment
conditions are met), the function immediately branches to label 4.
However, the assembly at label 4 expects the length to be stored in
register r2.  Since this has not occurred, subsequent behavior is
undefined.

This can cause bad payload checksums in TCP connections.

I've fixed the problem by initializing register r2 prior to the branch
instruction.
Signed-off-by: NOllie Wild <aaw@rincewind.tv>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We had a pretty interesting oops happening, where copy_user_page()
was down()'ing p3map_sem[] with a bogus offset (particularly, an
offset that hadn't been initialized with sema_init(), due to the
mismatch between cpu_data->dcache.n_aliases and what was assumed
based off of the old CACHE_ALIAS value).

Luckily, spinlock debugging caught this for us, and so we drop
the old hardcoded CACHE_ALIAS for sh4 completely and rely on the
run-time probed cpu_data->dcache.alias_mask. This in turn gets
the p3map_sem[] index right, and everything works again.

While we're at it, also convert to 4-level page tables..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The syscall table has lagged behind a bit, wire up the new ones..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

It's defined in <linux/cpumask.h> and log is horribly flooded by
"redefined" messages.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Merge support for SH7770 and SH7780 SH-4A subtypes.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update oprofile build rules for additional subtypes,
particularly SH7750S/SH7091.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Allow multiple early printk consoles via earlyprintk=.

With this change earlyprintk is no longer enabled by default,
it must be specified on the kernel command line. Optionally
with ,keep to prevent unreg by tty_io.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH-2/3/4 are able to prefetch, add support for it..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Minor sign-extension bug in SH-specific memset()..
Signed-off-by: NToshinobu Sugioka <sugioka@itonet.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Newer SH7760 cuts have a range of acceptable PRR values..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This reworks some of the SH-4 cache handling code to more easily
accomodate newer-style caches (particularly for the > direct-mapped
case), as well as optimizing some of the old code.
Signed-off-by: NRichard Curnow <richard.curnow@st.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH-4A supports 'synco' as a barrier, sprinkle it around
the cache ops as necessary..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

More of the same, trivial cleanups, and moving options to their
own board-specific Kconfig.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Various cleanups for HS7751RVoIP. Mostly just getting
rid of the old mach.c and splitting codec configuration
in to its own Kconfig.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update the SH DAC audio driver for the clock framework.
Signed-off-by: NAndriy Skulysh <askulysh@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

suspend/resume support for hitfb, as well as some other
minor cleanups.
Signed-off-by: NAndriy Skulysh <askulysh@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

With the I/O rework for hd64461 we're down to a single header,
so move it by itself and get rid of the directory.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH7300 has a different TMU_TOCR, make the TMU code work again.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some of these have suffered some bitrot, and so there is
some degree of dead code that has been left sitting around,
clean it up..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We don't support this on SH, so just disable it..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

For some of the larger sizes we permitted spanning pages
across several PTEs, but this turned out to not be generally
useful. This reverts the sh hugetlbpage interface to something
more sensible using huge pages at single PTE granularity.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some minor cleanups for the updated consolidated hp6xx
mach-type.
Signed-off-by: NAndriy Skulysh <askulysh@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We had quite a bit of whitespace damage, clean most of it up..
Signed-off-by: NStuart Menefy <stuart.menefy@st.com>
Signed-off-by: NArthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

These were previously sprinkled in machine_power_off(),
though missed being updated when the rest of the boards
switched over.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We had a special .stack section in the ld script that
was being used to position r15 initially. This is
nonsensical, as we can just use a THREAD_SIZE offset
from the init_thread_union instead (as every other arch
does).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

in_nmi shifted down a few labels, so we were inadvertently
clearing the lower byte of do_syscall_trace, badness ensues.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Move the syscall table in to its own file, as per sh64. The entry.S
bits will end up being considerably different in the sh2/sh2a cases,
so this lets us keep things in sync somewhat..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>