- 08 6月, 2016 12 次提交
-
-
由 Mike Christie 提交于
This should be the easier cases to convert btrfs to bio_set_op_attrs/bio_op. They are mostly just cut and replace type of changes. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This patch has btrfs's submit_one_bio users set the bio op using bio_set_op_attrs and get the op using bio_op. The next patches will continue to convert btrfs, so submit_bio_hook and merge_bio_hook related code will be modified to take only the bio. I did not do it in this patch to try and keep it smaller. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This patch has the dio code use a REQ_OP for the op and rq_flag_bits for bi_rw flags. To set/get the op it uses the bio_set_op_attrs/bio_op accssors. It also begins to convert btrfs's dio_submit_t because of the dio submit_io callout use. The next patches will completely convert this code and the reset of the btrfs code paths. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This converts the block issue discard helper and users to use the bio_set_op_attrs accessor and only pass in the operation flags like REQ_SEQURE. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
We currently set REQ_WRITE/WRITE for all non READ IOs like discard, flush, writesame, etc. In the next patches where we no longer set up the op as a bitmap, we will not be able to detect a operation direction like writesame by testing if REQ_WRITE is set. This has bcache use the op_is_write helper which will do the right thing. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
We currently set REQ_WRITE/WRITE for all non READ IOs like discard, flush, writesame, etc. In the next patches where we no longer set up the op as a bitmap, we will not be able to detect a operation direction like writesame by testing if REQ_WRITE is set. This has dm use the op_is_write helper which will do the right thing. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
We currently set REQ_WRITE/WRITE for all non READ IOs like discard, flush, writesame, etc. In the next patches where we no longer set up the op as a bitmap, we will not be able to detect a operation direction like writesame by testing if REQ_WRITE is set. This patch converts the drivers and cgroup to use the op_is_write helper. This should just cover the simple cases. I did dm, md and bcache in their own patches because they were more involved. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This has ll_rw_block users pass in the operation and flags separately, so ll_rw_block can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
The following patches separate the operation (WRITE, READ, DISCARD, etc) from the rq_flag_bits flags. This patch adds definitions for request/bio operations (REQ_OPs) and adds request/bio accessors to get/set the op. In this patch the REQ_OPs match the REQ rq_flag_bits ones for compat reasons while all the code is converted to use the op accessors in the set. In the last patches the op will become a number and the accessors and helpers in this patch will be dropped or updated. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: NMike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 06 6月, 2016 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: - Fix printk time stamps on SMP systems which got wrong due to a patch which was added during the merge window - Fix two bugs in the stack backtrace code: Races in module unloading and possible invalid accesses to memory due to wrong instruction decoding (Mikulas Patocka) - Fix userspace crash when syscalls access invalid unaligned userspace addresses. Those syscalls will now return EFAULT as expected. (tagged for stable kernel series) * 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Move die_if_kernel() prototype into traps.h header parisc: Fix pagefault crash in unaligned __get_user() call parisc: Fix printk time during boot parisc: Fix backtrace on PA-RISC
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull key handling update from James Morris: "This alters a new keyctl function added in the current merge window to allow for a future extension planned for the next merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Add placeholder for KDF usage with DH
-
由 Eric W. Biederman 提交于
The /dev/ptmx device node is changed to lookup the directory entry "pts" in the same directory as the /dev/ptmx device node was opened in. If there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx uses that filesystem. Otherwise the open of /dev/ptmx fails. The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that userspace can now safely depend on each mount of devpts creating a new instance of the filesystem. Each mount of devpts is now a separate and equal filesystem. Reserved ttys are now available to all instances of devpts where the mounter is in the initial mount namespace. A new vfs helper path_pts is introduced that finds a directory entry named "pts" in the directory of the passed in path, and changes the passed in path to point to it. The helper path_pts uses a function path_parent_directory that was factored out of follow_dotdot. In the implementation of devpts: - devpts_mnt is killed as it is no longer meaningful if all mounts of devpts are equal. - pts_sb_from_inode is replaced by just inode->i_sb as all cached inodes in the tty layer are now from the devpts filesystem. - devpts_add_ref is rolled into the new function devpts_ptmx. And the unnecessary inode hold is removed. - devpts_del_ref is renamed devpts_release and reduced to just a deacrivate_super. - The newinstance mount option continues to be accepted but is now ignored. In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as they are never used. Documentation/filesystems/devices.txt is updated to describe the current situation. This has been verified to work properly on openwrt-15.05, centos5, centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3, ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1, slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the caveat that on centos6 and on slackware-14.1 that there wind up being two instances of the devpts filesystem mounted on /dev/pts, the lower copy does not end up getting used. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 6月, 2016 12 次提交
-
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
One of the debian buildd servers had this crash in the syslog without any other information: Unaligned handler failed, ret = -2 clock_adjtime (pid 22578): Unaligned data reference (code 28) CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G E 4.5.0-2-parisc64-smp #1 Debian 4.5.4-1 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111100000001111 Tainted: G E r00-03 000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0 r04-07 00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff r08-11 0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4 r12-15 000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b r16-19 0000000000028800 0000000000000001 0000000000000070 00000001bde7c218 r20-23 0000000000000000 00000001bde7c210 0000000000000002 0000000000000000 r24-27 0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0 r28-31 0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218 sr00-03 0000000001200000 0000000001200000 0000000000000000 0000000001200000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88 IIR: 0ca0d089 ISR: 0000000001200000 IOR: 00000000fa6f7fff CPU: 1 CR30: 00000001bde7c000 CR31: ffffffffffffffff ORIG_R28: 00000002369fe628 IAOQ[0]: compat_get_timex+0x2dc/0x3c0 IAOQ[1]: compat_get_timex+0x2e0/0x3c0 RP(r2): compat_get_timex+0x40/0x3c0 Backtrace: [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0 [<0000000040205024>] syscall_exit+0x0/0x14 This means the userspace program clock_adjtime called the clock_adjtime() syscall and then crashed inside the compat_get_timex() function. Syscalls should never crash programs, but instead return EFAULT. The IIR register contains the executed instruction, which disassebles into "ldw 0(sr3,r5),r9". This load-word instruction is part of __get_user() which tried to read the word at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in. The unaligned handler is able to emulate all ldw instructions, but it fails if it fails to read the source e.g. because of page fault. The following program reproduces the problem: #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/mman.h> int main(void) { /* allocate 8k */ char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); /* free second half (upper 4k) and make it invalid. */ munmap(ptr+4096, 4096); /* syscall where first int is unaligned and clobbers into invalid memory region */ /* syscall should return EFAULT */ return syscall(__NR_clock_adjtime, 0, ptr+4095); } To fix this issue we simply need to check if the faulting instruction address is in the exception fixup table when the unaligned handler failed. If it is, call the fixup routine instead of crashing. While looking at the unaligned handler I found another issue as well: The target register should not be modified if the handler was unsuccessful. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
-
由 Helge Deller 提交于
Avoid showing invalid printk time stamps during boot. Signed-off-by: NHelge Deller <deller@gmx.de> Reviewed-by: NAaro Koskinen <aaro.koskinen@iki.fi>
-
由 Mikulas Patocka 提交于
This patch fixes backtrace on PA-RISC There were several problems: 1) The code that decodes instructions handles instructions that subtract from the stack pointer incorrectly. If the instruction subtracts the number X from the stack pointer the code increases the frame size by (0x100000000-X). This results in invalid accesses to memory and recursive page faults. 2) Because gcc reorders blocks, handling instructions that subtract from the frame pointer is incorrect. For example, this function int f(int a) { if (__builtin_expect(a, 1)) return a; g(); return a; } is compiled in such a way, that the code that decreases the stack pointer for the first "return a" is placed before the code for "g" call. If we recognize this decrement, we mistakenly believe that the frame size for the "g" call is zero. To fix problems 1) and 2), the patch doesn't recognize instructions that decrease the stack pointer at all. To further safeguard the unwind code against nonsense values, we don't allow frame size larger than Total_frame_size. 3) The backtrace is not locked. If stack dump races with module unload, invalid table can be accessed. This patch adds a spinlock when processing module tables. Note, that for correct backtrace, you need recent binutils. Binutils 2.18 from Debian 5 produce garbage unwind tables. Binutils 2.21 work better (it sometimes forgets function frames, but at least it doesn't generate garbage). Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of ARM drivers got into the fixes vibe this time around, so this contains a bunch of fixes for imx, atmel hlcdc, arm hdlcd (only so many combos of hlcd), mediatek and omap drm. Other than that there is one mgag200 fix and a few core drm regression fixes" * tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux: (34 commits) drm/omap: fix unused variable warning. drm: hdlcd: Add information about the underlying framebuffers in debugfs drm: hdlcd: Cleanup the atomic plane operations drm/hdlcd: Fix up crtc_state->event handling drm: hdlcd: Revamp runtime power management drm/mediatek: mtk_dsi: Remove spurious drm_connector_unregister drm/mediatek: mtk_dpi: remove invalid error message drm: atmel-hlcdc: fix a NULL check drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation drm/mgag200: Black screen fix for G200e rev 4 drm: Wrap direct calls to driver->gem_free_object from CMA drm: fix fb refcount issue with atomic modesetting drm: make drm_atomic_set_mode_prop_for_crtc() more reliable drm/sti: remove extra mode fixup drm: add missing drm_mode_set_crtcinfo call drm/omap: include gpio/consumer.h where needed drm/omap: include linux/seq_file.h where needed Revert "drm/omap: no need to select OMAP2_DSS" drm/omap: Remove regulator API abuse OMAPDSS: HDMI5: Change DDC timings ...
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fixes from Alex Williamson: "Fix irqfd shutdown ordering, build warning, and VPD short read" * tag 'vfio-v4.7-rc2' of git://github.com/awilliam/linux-vfio: vfio/pci: Allow VPD short read vfio/type1: Fix build warning vfio/pci: Fix ordering of eventfd vs virqfd shutdown
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix/restore behaviour when selecting bus width for (e)MMC MMC host: - sunxi: Fix eMMC HS-DDR modes on Allwinner A80" * tag 'mmc-v4.7-rc1-2' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sunxi: Re-enable eMMC HS-DDR modes on Allwinner A80 mmc: sunxi: Fix DDR MMC timings for A80 mmc: fix mmc mode selection for HS-DDR and higher
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "The important part of this pull is Filipe's set of fixes for btrfs device replacement. Filipe fixed a few issues seen on the list and a number he found on his own" * 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent Btrfs: fix race between device replace and read repair Btrfs: fix race between device replace and discard Btrfs: fix race between device replace and chunk allocation Btrfs: fix race setting block group back to RW mode during device replace Btrfs: fix unprotected assignment of the left cursor for device replace Btrfs: fix race setting block group readonly during device replace Btrfs: fix race between device replace and block group removal Btrfs: fix race between readahead and device replace/removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph fixes from Sage Weil: "We have a few follow-up fixes for the libceph refactor from Ilya, and then some cephfs + fscache fixes from Zheng. The first two FS-Cache patches are acked by David Howells and deemed trivial enough to go through our tree. The rest fix some issues with the ceph fscache handling (disable cache for inodes opened for write, and simplify the revalidation logic accordingly, dropping the now-unnecessary work queue)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: use i_version to check validity of fscache ceph: improve fscache revalidation ceph: disable fscache when inode is opened for write ceph: avoid unnecessary fscache invalidation/revlidation ceph: call __fscache_uncache_page() if readpages fails FS-Cache: make check_consistency callback return int FS-Cache: wake write waiter after invalidating writes libceph: use %s instead of %pE in dout()s libceph: put request only if it's done in handle_reply() libceph: change ceph_osdmap_flag() to take osdc
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "Two fixes for problems introduced recently (ACPICA and the ACPI backlight driver) and one fix for an older issue that prevents at least one system from booting. Specifics: - Fix an incorrect check introduced by recent ACPICA changes which causes problems with booting KVM guests to happen, among other things (Lv Zheng). - Fix a backlight issue introduced by recent changes to the ACPI video driver (Aaron Lu). - Fix the ACPI processor initialization which attempts to register an IO region without checking if that really is necessary and sometimes prevents drivers loaded subsequently from registering their resources which leads to boot issues (Rafael Wysocki)" * tag 'acpi-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Avoid reserving IO regions too early ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width() ACPI / Thermal / video: fix max_level incorrect value
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "Two fixes for problems introduced recently in the cpufreq core and the intel_pstate driver. Specifics: - Fix a silly mistake related to the clamp_val() usage in a function added by a recent commit (Rafael Wysocki). - Reduce the log level of an annoying message added to intel_pstate during the recent merge window (Srinivas Pandruvada)" * tag 'pm-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Fix clamp_val() usage in cpufreq_driver_fast_switch() cpufreq: intel_pstate: Downgrade print level for _PPC
-
由 Linus Torvalds 提交于
Merge various fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, page_alloc: recalculate the preferred zoneref if the context can ignore memory policies mm, page_alloc: reset zonelist iterator after resetting fair zone allocation policy mm, oom_reaper: do not use siglock in try_oom_reaper() mm, page_alloc: prevent infinite loop in buffered_rmqueue() checkpatch: reduce git commit description style false positives mm/z3fold.c: avoid modifying HEADLESS page and minor cleanup memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem() mm: check the return value of lookup_page_ext for all call sites kdump: fix dmesg gdbmacro to work with record based printk mm: fix overflow in vm_map_ram()
-
- 04 6月, 2016 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: - a few simple fixes for fallout from the recent gic-v3 changes - a workaround for a Cavium thunderX erratum - a bugfix for the pic32 irqchip to make external interrupts work proper - a missing return value in the generic IPI management code * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-pic32-evic: Fix bug with external interrupts. irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144 irqchip/gic-v3: Fix quiescence check in gic_enable_redist irqchip/gic-v3: Fix copy+paste mistakes in defines irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask genirq: Fix missing return value in irq_destroy_ipi()
-
由 Mel Gorman 提交于
The optimistic fast path may use cpuset_current_mems_allowed instead of of a NULL nodemask supplied by the caller for cpuset allocations. The preferred zone is calculated on this basis for statistic purposes and as a starting point in the zonelist iterator. However, if the context can ignore memory policies due to being atomic or being able to ignore watermarks then the starting point in the zonelist iterator is no longer correct. This patch resets the zonelist iterator in the allocator slowpath if the context can ignore memory policies. This will alter the zone used for statistics but only after it is known that it makes sense for that context. Resetting it before entering the slowpath would potentially allow an ALLOC_CPUSET allocation to be accounted for against the wrong zone. Note that while nodemask is not explicitly set to the original nodemask, it would only have been overwritten if cpuset_enabled() and it was reset before the slowpath was entered. Link: http://lkml.kernel.org/r/20160602103936.GU2527@techsingularity.net Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice") Signed-off-by: NMel Gorman <mgorman@techsingularity.net> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NVlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Geert Uytterhoeven reported the following problem that bisected to commit c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice") on m68k/ARAnyM BUG: scheduling while atomic: cron/668/0x10c9a0c0 Modules linked in: CPU: 0 PID: 668 Comm: cron Not tainted 4.6.0-atari-05133-gc33d6c06 #364 Call Trace: [<0003d7d0>] __schedule_bug+0x40/0x54 __schedule+0x312/0x388 __schedule+0x0/0x388 prepare_to_wait+0x0/0x52 schedule+0x64/0x82 schedule_timeout+0xda/0x104 set_next_entity+0x18/0x40 pick_next_task_fair+0x78/0xda io_schedule_timeout+0x36/0x4a bit_wait_io+0x0/0x40 bit_wait_io+0x12/0x40 __wait_on_bit+0x46/0x76 wait_on_page_bit_killable+0x64/0x6c bit_wait_io+0x0/0x40 wake_bit_function+0x0/0x4e __lock_page_or_retry+0xde/0x124 do_scan_async+0x114/0x17c lookup_swap_cache+0x24/0x4e handle_mm_fault+0x626/0x7de find_vma+0x0/0x66 down_read+0x0/0xe wait_on_page_bit_killable_timeout+0x77/0x7c find_vma+0x16/0x66 do_page_fault+0xe6/0x23a res_func+0xa3c/0x141a buserr_c+0x190/0x6d4 res_func+0xa3c/0x141a buserr+0x20/0x28 res_func+0xa3c/0x141a buserr+0x20/0x28 The relationship is not obvious but it's due to a failure to rescan the full zonelist after the fair zone allocation policy exhausts the batch count. While this is a functional problem, it's also a performance issue. A page allocator microbenchmark showed the following 4.7.0-rc1 4.7.0-rc1 vanilla reset-v1r2 Min alloc-odr0-1 327.00 ( 0.00%) 326.00 ( 0.31%) Min alloc-odr0-2 235.00 ( 0.00%) 235.00 ( 0.00%) Min alloc-odr0-4 198.00 ( 0.00%) 198.00 ( 0.00%) Min alloc-odr0-8 170.00 ( 0.00%) 170.00 ( 0.00%) Min alloc-odr0-16 156.00 ( 0.00%) 156.00 ( 0.00%) Min alloc-odr0-32 150.00 ( 0.00%) 150.00 ( 0.00%) Min alloc-odr0-64 146.00 ( 0.00%) 146.00 ( 0.00%) Min alloc-odr0-128 145.00 ( 0.00%) 145.00 ( 0.00%) Min alloc-odr0-256 155.00 ( 0.00%) 155.00 ( 0.00%) Min alloc-odr0-512 168.00 ( 0.00%) 165.00 ( 1.79%) Min alloc-odr0-1024 175.00 ( 0.00%) 174.00 ( 0.57%) Min alloc-odr0-2048 180.00 ( 0.00%) 180.00 ( 0.00%) Min alloc-odr0-4096 187.00 ( 0.00%) 186.00 ( 0.53%) Min alloc-odr0-8192 190.00 ( 0.00%) 190.00 ( 0.00%) Min alloc-odr0-16384 191.00 ( 0.00%) 191.00 ( 0.00%) Min alloc-odr1-1 736.00 ( 0.00%) 445.00 ( 39.54%) Min alloc-odr1-2 343.00 ( 0.00%) 335.00 ( 2.33%) Min alloc-odr1-4 277.00 ( 0.00%) 270.00 ( 2.53%) Min alloc-odr1-8 238.00 ( 0.00%) 233.00 ( 2.10%) Min alloc-odr1-16 224.00 ( 0.00%) 218.00 ( 2.68%) Min alloc-odr1-32 210.00 ( 0.00%) 208.00 ( 0.95%) Min alloc-odr1-64 207.00 ( 0.00%) 203.00 ( 1.93%) Min alloc-odr1-128 276.00 ( 0.00%) 202.00 ( 26.81%) Min alloc-odr1-256 206.00 ( 0.00%) 202.00 ( 1.94%) Min alloc-odr1-512 207.00 ( 0.00%) 202.00 ( 2.42%) Min alloc-odr1-1024 208.00 ( 0.00%) 205.00 ( 1.44%) Min alloc-odr1-2048 213.00 ( 0.00%) 212.00 ( 0.47%) Min alloc-odr1-4096 218.00 ( 0.00%) 216.00 ( 0.92%) Min alloc-odr1-8192 341.00 ( 0.00%) 219.00 ( 35.78%) Note that order-0 allocations are unaffected but higher orders get a small boost from this patch and a large reduction in system CPU usage overall as can be seen here: 4.7.0-rc1 4.7.0-rc1 vanilla reset-v1r2 User 85.32 86.31 System 2221.39 2053.36 Elapsed 2368.89 2202.47 Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice") Link: http://lkml.kernel.org/r/20160531100848.GR2527@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NMikulas Patocka <mpatocka@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Oleg has noted that siglock usage in try_oom_reaper is both pointless and dangerous. signal_group_exit can be checked lockless. The problem is that sighand becomes NULL in __exit_signal so we can crash. Fixes: 3ef22dff ("oom, oom_reaper: try to reap tasks which skip regular OOM killer path") Link: http://lkml.kernel.org/r/1464679423-30218-1-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Suggested-by: NOleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
In DEBUG_VM kernel, we can hit infinite loop for order == 0 in buffered_rmqueue() when check_new_pcp() returns 1, because the bad page is never removed from the pcp list. Fix this by removing the page before retrying. Also we don't need to check if page is non-NULL, because we simply grab it from the list which was just tested for being non-empty. Fixes: 479f854a ("mm, page_alloc: defer debugging checks of pages allocated from the PCP") Link: http://lkml.kernel.org/r/20160530090154.GM2527@techsingularity.netSigned-off-by: NVlastimil Babka <vbabka@suse.cz> Signed-off-by: NMel Gorman <mgorman@techsingularity.net> Reported-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Some lines in a commit log appear to be commit SHA1 ids like: ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 0123456789ab ("commit description")' Link: http://lkml.kernel.org/r/40e03fd7aaf1f55c75d787128d6d17c5a71226c2.1464358556.git.vdavydov@virtuozzo.com Reduce the false positives. Link: http://lkml.kernel.org/r/eda977eaa8328fef42bb3c87935d97e10ea8ff67.1464384023.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vitaly Wool 提交于
Fix erroneous z3fold header access in a HEADLESS page in reclaim function, and change one remaining direct handle-to-buddy conversion to use the appropriate helper. Link: http://lkml.kernel.org/r/5748706F.9020208@gmail.comSigned-off-by: NVitaly Wool <vitalywool@gmail.com> Reviewed-by: NDan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
memcg_offline_kmem() may be called from memcg_free_kmem() after a css init failure. memcg_free_kmem() is a ->css_free callback which is called without cgroup_mutex and memcg_offline_kmem() ends up using css_for_each_descendant_pre() without any locking. Fix it by adding rcu read locking around it. mkdir: cannot create directory `65530': No space left on device =============================== [ INFO: suspicious RCU usage. ] 4.6.0-work+ #321 Not tainted ------------------------------- kernel/cgroup.c:4008 cgroup_mutex or RCU read lock required! [ 527.243970] other info that might help us debug this: [ 527.244715] rcu_scheduler_active = 1, debug_locks = 0 2 locks held by kworker/0:5/1664: #0: ("cgroup_destroy"){.+.+..}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0 #1: ((&css->destroy_work)#3){+.+...}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0 [ 527.248098] stack backtrace: CPU: 0 PID: 1664 Comm: kworker/0:5 Not tainted 4.6.0-work+ #321 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Workqueue: cgroup_destroy css_free_work_fn Call Trace: dump_stack+0x68/0xa1 lockdep_rcu_suspicious+0xd7/0x110 css_next_descendant_pre+0x7d/0xb0 memcg_offline_kmem.part.44+0x4a/0xc0 mem_cgroup_css_free+0x1ec/0x200 css_free_work_fn+0x49/0x5e0 process_one_work+0x1c5/0x4a0 worker_thread+0x49/0x490 kthread+0xea/0x100 ret_from_fork+0x1f/0x40 Link: http://lkml.kernel.org/r/20160526203018.GG23194@mtj.duckdns.orgSigned-off-by: NTejun Heo <tj@kernel.org> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer bugfix from Thomas Gleixner: "A single bugfix for the error check wreckage we introduced in the merge window" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Make settimeofday error checking work again
-
由 Yang Shi 提交于
Per the discussion with Joonsoo Kim [1], we need check the return value of lookup_page_ext() for all call sites since it might return NULL in some cases, although it is unlikely, i.e. memory hotplug. Tested with ltp with "page_owner=0". [1] http://lkml.kernel.org/r/20160519002809.GA10245@js1304-P5Q-DELUXE [akpm@linux-foundation.org: fix build-breaking typos] [arnd@arndb.de: fix build problems from lookup_page_ext] Link: http://lkml.kernel.org/r/6285269.2CksypHdYp@wuerfel [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1464023768-31025-1-git-send-email-yang.shi@linaro.orgSigned-off-by: NYang Shi <yang.shi@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corey Minyard 提交于
Commit 7ff9554b ("printk: convert byte-buffer to variable-length record buffer") introduced a record based printk buffer. Modify gdbmacros.txt to parse this new structure so dmesg will work properly. Link: http://lkml.kernel.org/r/1463515794-1599-1-git-send-email-minyard@acm.orgSigned-off-by: NCorey Minyard <cminyard@mvista.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guillermo Julián Moreno 提交于
When remapping pages accounting for 4G or more memory space, the operation 'count << PAGE_SHIFT' overflows as it is performed on an integer. Solution: cast before doing the bitshift. [akpm@linux-foundation.org: fix vm_unmap_ram() also] [akpm@linux-foundation.org: fix vmap() as well, per Guillermo] Link: http://lkml.kernel.org/r/etPan.57175fb3.7a271c6b.2bd@naudit.esSigned-off-by: NGuillermo Julián Moreno <guillermo.julian@naudit.es> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-