- 02 8月, 2010 4 次提交
-
-
由 Yehuda Sadeh 提交于
Caps related accounting is now being done per mds client instead of just being global. This prepares ground work for a later revision of the caps preallocated reservation list. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
No functional change, aside from more useful debug output. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
- 28 7月, 2010 1 次提交
-
-
由 Yehuda Sadeh 提交于
This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 17 7月, 2010 2 次提交
-
-
由 Sage Weil 提交于
Strip the cap and dentry releases from replayed messages. They can cause the shared state to get out of sync because they were generated (with the request message) earlier, and no longer reflect the current client state. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Replayed rename operations (after an mds failure/recovery) were broken because the request paths were regenerated from the dentry names, which get mangled when d_move() is called. Instead, resend the previous request message when replaying completed operations. Just make sure the REPLAY flag is set and the target ino is filled in. This fixes problems with workloads doing renames when the MDS restarts, where the rename operation appears to succeed, but on mds restart then fails (leading to client confusion, app breakage, etc.). Signed-off-by: NSage Weil <sage@newdream.net>
-
- 22 6月, 2010 1 次提交
-
-
由 Sage Weil 提交于
This fixes a race between handle_reply finishing an mds request, signalling completion, and then dropping the request structing and its dentry+inode refs, and pre_umount function waiting for requests to finish before letting the vfs tear down the dcache. If umount was delayed waiting for mds requests, we could race and BUG in shrink_dcache_for_umount_subtree because of a slow dput. This delays umount until the msgr queue flushes, which means handle_reply will exit and will have dropped the ceph_mds_request struct. I'm assuming the VFS has already ensured that its calls have all completed and those request refs have thus been dropped as well (I haven't seen that race, at least). Signed-off-by: NSage Weil <sage@newdream.net>
-
- 11 6月, 2010 2 次提交
-
-
由 Sage Weil 提交于
If we have enough memory to allocate a new cap release message, do so, so that we can send a partial release message immediately. This keeps us from making the MDS wait when the cap release it needs is in a partially full release message. If we fail because of ENOMEM, oh well, they'll just have to wait a bit longer. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
If we get an IMPORT that give us a cap, but we don't have the inode, queue a release (and try to send it immediately) so that the MDS doesn't get stuck waiting for us. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 05 6月, 2010 1 次提交
-
-
由 Sage Weil 提交于
If the client revokes a lease with a higher seq than what we have, keep the mds's seq, so that it honors our release. Otherwise, we can hang indefinitely. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 30 5月, 2010 3 次提交
-
-
由 Sage Weil 提交于
If an mds request is aborted (timeout, SIGKILL), it is left registered to keep our state in sync with the mds. If we get a forward notification, though, we know the request didn't succeed and we can unregister it safely. We were trying to resend it, but then bailing out (and not unregistering) in __do_request. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The lease code includes a mask in the CEPH_LOCK_* namespace, but that namespace is changing, and only one mask (formerly _DN == 1) is used, so hard code for that value for now. If we ever extend this code to handle leases over different data types we can extend it accordingly. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The underlying problem is that many mds requests can't be restarted. For example, a restarted create() would return -EEXIST if the original request succeeds. However, we do not want a hung MDS to hang the client too. So, use the _killable wait_for_completion variants to abort on SIGKILL but nothing else. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 22 5月, 2010 1 次提交
-
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 18 5月, 2010 18 次提交
-
-
由 Yehuda Sadeh 提交于
This is essential, as for the rados block device we'll need to run in different contexts that would need flags that are other than GFP_NOFS. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We invalidate I_COMPLETE and dentry leases in two places: on aborted mds request and on request replay. Use common helper to avoid duplicate code. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The remove_session_caps() helper is called when an MDS closes out our session (either normally, or as a result of a failed reconnect), and when we tear down state for umount. If we remove the last cap, and there are no cap migrations in progress, then there is little hope of us flushing out that data to the mds (without heroic efforts to reconnect and flush). So, to avoid leaving inodes pinned (due to dirty state) and crashing after umount, throw out dirty caps state and unpin the inodes. Print a warning to the console so we know something was lost. NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean; maybe a truncate should be queued? Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Currently, if our session is closed (due to a timeout, or explicit close, or whatever), we just sit there doing nothing unless/until the MDS restarts, at which point we try to reconnect. Change client to attempt an immediate reconnect if our session is closed. Note that currently the MDS doesn't support this, and our attempt will fail. We'll get a session CLOSE, our caps and dirty cap state will be dropped, and the client will be free to attempt to reconnect. That's clearly not as nice as a successful reconnect, but it at least allows us to try to carry on, and in the future the MDS will support a reconnect and we will fare better. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Pass a ceph_mds_session, since the caller has it. Remove the dead code for sending empty reconnects. It used to be used when the MDS contacted _us_ to solicit a reconnect, and we could reply saying "go away, I have no session." Now we only send reconnects based on the mds map, and only when we do in fact have an open session. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We used to infer reconnect success by watching the MDS state, essentially assuming that hearing nothing meant things were ok. That wasn't particularly reliable. Instead, the MDS replies with an explicit OPEN message to indicate success. Strictly speaking, this is a protocol change, but it is a backwards compatible one that does not break new clients + old servers or old clients + new servers. At least not yet. Drop unused @all argument from kick_requests while we're at it. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
On OPENING we shouldn't have any caps (or releases). On CLOSING, we should wait until we succeed (and throw it all out), or don't (and are OPEN again). On RECONNECTING we can wait until we are OPEN. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
If the MDS restarts, the expire caps state is no longer shared, and can be thrown out. Caps state will be rebuilt on the MDS during the reconnect process that follows. Zero out any release messages and adjust the release counter accordingly. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We only need to pass in front_len. Callers can attach any other payload pieces (middle, data) as they see fit. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Cheng Renquan 提交于
Signed-off-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
If we abort a request, we return to caller, but the request may still complete. And if we hold the dir FILE_EXCL bit, we may not release a lease when sending a request. A simple un-tar, control-c, un-tar again will reproduce the bug (manifested as a 'Cannot open: File exists'). Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so we don't have valid (but incorrect) leases. Do the same, consistently, at other sites where I_COMPLETE is similarly cleared. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
When we abort requests we need to prevent fill_trace et al from doing anything that relies on locks held by the VFS caller. This fixes a race between the reply handler and the abort code, ensuring that continue holding the dir mutex until the reply handler completes. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We would occasionally BUG out in the reply handler because r_reply was nonzero, due to a race with ceph_mdsc_do_request temporarily setting r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong in the EIO case. Clean up by consistently using r_err for errors and r_reply for messages. Also fix the abort logic to trigger consistently for all errors that return to the caller early (e.g., EIO from timeout case). If an abort races with a reply, use the result from the reply. Also fix locking for r_err, r_reply update in the reply handler. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 12 5月, 2010 2 次提交
-
-
由 Sage Weil 提交于
The iterate_session_caps helper traverses the session caps list and tries to grab an inode reference. However, the __ceph_remove_cap was clearing the inode backpointer _before_ removing itself from the session list, causing a null pointer dereference. Clear cap->ci under protection of s_cap_lock to avoid the race, and to tightly couple the list and backpointer state. Use a local flag to indicate whether we are releasing the cap, as cap->session may be modified by a racing thread in iterate_session_caps. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This was causing (rare) s_waiting list corruption. Fix errors paths too, while we're here. A more thorough cleanup of this function is coming soon. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 29 3月, 2010 1 次提交
-
-
由 Sage Weil 提交于
There was a use after free in __unregister_request that would trigger whenever the request map held the last reference. This appears to have triggered an oops during 'umount -f' when requests are being torn down. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 23 3月, 2010 3 次提交
-
-
由 Sage Weil 提交于
Fix a broken check that a reply came back from the same MDS we sent the request to. I don't think a case that actually triggers this would ever come up in practice, but it's clearly wrong and easy to fix. Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Dan Carpenter 提交于
Return ERR_PTR(-ENOMEM) if kmalloc() fails. We handle allocation failures the same way later in the function. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Return error to original caller if register_session() fails. Signed-off-by: NSage Weil <sage@newdream.net>
-