Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this development.
Signed-off-by: NGilberto <gilberto@sistemafenix.com.br>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this development.
Signed-off-by: NGilberto <gilberto@sistemafenix.com.br>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Cc: Jean-Francois Moine <moinejf@free.fr>
Cc: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The audio switch is at 0x100 and radio on gpio 21.
Tested-by: NThomas Genty <tomlohave@gmail.com>
Signed-off-by: NDavid Bentham <db260179@hotmail.com>
Reviewed-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Firmware selection is very tricky on this device. This patch do a better
selection of the proper firmware type, by using a code to hint if the
firmware to be loaded should be D2620 or D2633.

It also allows overriding the hint at the control structure.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The tuner_callback function pointer from struct xc5000_config has been removed.
Use dvb_frontend->callback instead.

Also, mark function dib0700_xc5000_tuner_callback as static int.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove tuner_callback pointers from tuner driver configuration
and private state structures, replaced with a general-purpose
callback pointer within struct dvb_frontend.

A new parameter is added to the callback function, called
component. This allows us to use this callback pointer by
frontend components other than the tuner, if need be. So
far, this is only used by tuner drivers.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds remote control support for the Hauppauge WinTV Nova-TD
(Diversity) model. (That's the 52009 version.) It also adds the
key-codes for the credit-card style remote control that comes with
this particular adapter.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID for Pinnacle PCTV HD USB Stick.  According to the USB trace and
photos, the only difference is the removal of the port for the analog
S-video/audio input.

Thanks to Mike Pringle <oblongd@gmail.com> for providing the USB trace of the
device starting up, and testing the support.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support for the Pinnacle PCTV HD Pro 801e creates a dib0700 dependency on
the xc5000 tuner and s5h1411 demodulator drivers.  Update KConfig accordingly.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a)

Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue with the i2c that prevented the xc5000 from working.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch introduces support for dvb-t for the following dibcom based
cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736)
Signed-off-by: NAlbert Comerma <albert.comerma@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08).
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by BOUWSMA Barry the readout of the signal status doesn't work
on dec3000-s models. Since we don't know how to do it better, revert back
to the old behaviour and always report a signal lock.

Reported by Barry Bouwsma
Signed-off-by: NPeter Beutner <p.beutner@gmx.net>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's
i2c implementation where it did not properly support a single i2c read request
(sending it as an i2c write request instead).  Version 1.20 of the firmware
added support for a new i2c API which supported such requests.

This change defaults to fw 1.20 for all devices, but does not default to using
the new i2c API (since initial testing suggests problems interacting with the
mt2060).  Maintainers can enable the use of the new i2c API by putting
the following into their frontend initialization:

struct dib0700_state *st = adap->dev->priv;
st->fw_use_new_i2c_api = 1;

Also note that the code expects i2c repeated start to be supported.  If the
i2c slave does not support repeated start, i2c messsages should have the
I2C_M_NOSTART flag set.

Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue as well as example i2c code utilizing the interface.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Thanks to Ilia Penev for the tip-off that this device is much the same as
(identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints:
http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html

DVB functionality tested OK with xine using the usual dib0700 firmware.

This diff is based on the latest latest linuxtv.org v4l-dvb mercurial
repo.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Auto-update controls are never marked is loaded to prevent uvc_get_ctrl from
loading the control value from the cache. When setting a composite (mapped to
several V4L2 controls) auto-update UVC control, the driver updates the control
cache value before processing each V4L2 control, overwriting the previously
set V4L2 control.

This fixes the problem by marking all controls as loaded in uvc_set_ctrl
regardless of their type and resetting the loaded flag in uvc_commit_ctrl for
auto-update controls.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This declares all missing UVC camera and processing unit controls. V4L2
mappings are not supported yet for those controls.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

instead of register_chrdev", the internal reference count is no longer
necessary in order to free the internal stk_webcam struct. This patch
removes the reference counter from the stk_webcam struct and frees the
struct via the video_device release callback. It also fixes an
associated bug in stk_camera_probe which could result from
video_unregister_device being called before video_register_device.
Lastly, it simplifies access to the stk_webcam struct in several
places. This patch should apply cleanly against the "working" branch
of the v4l-dvb git repository.

This patch is identical to the patch I sent a couple of months back
titled "stk-webcam: Fix video_device handling" except that it has been
rebased against current modifications to stk-webcam and it no longer
depends on any other outstanding patches.
Acked-by: NJaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: NDavid Ellingsworth <david@identd.dyndns.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/tda9840.c: In function 'tda9840_command':
drivers/media/video/tda9840.c:152: warning: 'result' is used uninitialized in this function

[mchehab@redhat.com: Fix conflict with another patch that were meant to solve the warning]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The status[] is part of  uvc_device structure. We can't make sure
the address of status is at a cache-line boundary in all archs,so
status[] might share a cache-line with some fields in uvc_structure.
This can lead to some cache coherence issues(http://lwn.net/Articles/2265/).
Use dynamically allocated buffer instead.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When streaming in a fixed size format the driver sets a flag in the uvc_queue
structure to drop incomplete incoming frames. The flag wasn't cleared when
switching to a variable size format, which resulted in a broken
'MJPEG after YUV'.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

after looking it up, all rants about the 80 columns restriction seem to
be in vain. After changing the card's name it are now "only" seven new
lines in the tiny DVB-T/DVB-S switch function.

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xfdef7000
saa7133[0]: subsystem: 1043:4878, board: Asus Tiger 3in1 [card=147,autodetected]
saa7133[0]: board init: gpio is 200000
tuner' 2-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: i2c eeprom 00: 43 10 78 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d7 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 28 00 c2 96 16 03 02 c0 1c ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c scan: found device @ 0x10  [???]
saa7133[0]: i2c scan: found device @ 0x16  [???]
saa7133[0]: i2c scan: found device @ 0x1c  [???]
saa7133[0]: i2c scan: found device @ 0x96  [???]
saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
tda829x 2-004b: setting tuner address to 61
tda829x 2-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0

DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10086 DVB-S)...

The board init gpio is 0x0, 0x200000 is from previously unloading with
antenna_switch = 1.

It needs firmware for the tda10046 and analog sound needs saa7134-alsa.

I have support for one more board and need to fix the first revision of
the Asus Tiger DVB-T hybrid. DVB-T currently hangs on the male radio
antenna input, also some small other stuff.

Please report any issues with this patch, the next are depending on this
one.

saa7134: add support for the triple Asus Tiger 3in1
Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for ST STV0288 demodulator and cards with it,
such as TeVii S420.
Patch is co-authored with Georg Acher <acher@baycom.de>
Signed-off-by: NGeorg Acher <acher@baycom.de>
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We don't want to push the ISDB-T definitions into the kernel until
we have a high level of confidence in the ISDB-T API. More testing
is required before this code is released.
Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Patch by Darron Broad.
Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Patch provided by Darron Broad.
Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Patch provided by Darron Broad
Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Added support for TBS 8920 DVB-S/S2 card. The card
based on cx24116 demodulator.
Signed-off-by: NOleg Roitburd <oroitburd@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Added support for Omicom SS4 DVB-S/S2 card. The card
based on cx24116 demodulator.
Signed-off-by: NOleg Roitburd <oroitburd@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for USB card modification with SI2109/2110 demodulator.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for Silicon Laboratories SI2109/2110 demodulator
and cards with it, such as DvbWorld PCI2002.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

From the author:
This patch-set fixes remote control issues I have experienced
with hauppauge drivers in Linux since the PVR-350 and now
with both a NOVA-S+ and HVR-4000. It has also been confirmed
to work with an HVR-1300 user who had exactly the same issue.

Hauppage remote controls use RC5. RC5 has a bit-field which
represents the target device. The hauppauge windows drivers
have a registry key which can enable filtering, but the linux
drivers will accept any target device in this bit field for
internal processing.

This causes problems with setups such as mythtv where remote
control key presses destined for the TV (target = 0) are
interpreted by the kernel and subsequenctly LIRC then mythtv.

Of the remote controls I have to hand (wintv black, pvr/hvr
silver) the hauppauge remotes send one of two device targets
ids, these are interpreted by the patch which then filters
out any non hauppauge addresses.
Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NDarron Broad <darron@kewl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

From the author:
Here is a simple patch detailing some reverse engineered
register detail lost in my latest merge. The comments
in the code refer to this register but it is never
defined. This corrects this.
Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NDarron Broad <darron@kewl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adjust MPEG initialization in cx24116 in order to accomodate different
MPEG CLK position and polarity in different cards. For example, HVR4000
uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG
stream was broken on that cards for symbol rates > 30000 kSyms/s.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove the debugging sysctls.
Rolloff was broken, not it works as expected and has been tested in kaffeine.
Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE.
Signed-off-by: NSteven Toth <stoth@linuxtv.org>
Signed-off-by: NDarron Broad <darron@kewl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for DvbWorld 2004 DVB-S2 PCI adapter.
The card contains dm1105 PCI chip and cx24116 demodulator
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>