Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Turns out the template and thus many drivers got the return value wrong:
0 means the fabrics driver needs to put a session reference, which no
driver except for the iSCSI target drivers did.  Fortunately none of these
drivers supports explicit Node ACLs, so the bug was harmless.

Even without that only qla2xxx and iscsi every did real work in
shutdown_session, so get rid of the boilerplate code in all other
drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Ensure we can use list_empty on the sess_acl_list to remove the need for
this flag.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Factor out a helper to shutdown sessions for a Node ACL, and make it
properly restart the list walk after dropping the lock.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

cxgbit.h - This file contains data structure
definitions for cxgbit.ko.

cxgbit_lro.h - This file contains data structure
definitions for LRO support.

cxgbit_main.c - This file contains code for
registering with iscsi target transport and
cxgb4 driver.

cxgbit_cm.c - This file contains code for
connection management.

cxgbit_target.c - This file contains code
for processing iSCSI PDU.

cxgbit_ddp.c - This file contains code for
Direct Data Placement.

(added check for NULL sg in cxgbit_set_one_ppod)
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>

(add Kconfig and Makefile v2: added dependency on INET)
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

export symbols for ISCSI_HW_OFFLOAD
transport drivers.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

ISCSI_HW_OFFLOAD transport drivers waits
on conn_logout_comp as ISCSI_TCP driver
so call complete if transport type
is ISCSI_HW_OFFLOAD.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

clear tx_thread_active for ISCSI_HW_OFFLOAD
transport in logout_post_handler functions.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add new transport type ISCSI_HW_OFFLOAD,
hw offload transport drivers will use
this transport type.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Use conn_transport->transport_type instead of
ISCSI_TCP to build text response.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Move iscsit_thread_check_cpumask() to header
file so that ISCSI_HW_OFFLOAD and other transport drivers
can call this function to ensure both tx and rx thread
runs on same cpu.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add void (*iscsit_get_r2t_ttt)() to
struct iscsit_transport, iscsi-target
uses this callback to get
r2t->targ_xfer_tag.

cxgbit.ko needs this callback
for Direct Data Placement of Data Out
pdus, adapter uses ttt in Data Out pdus
for placing data directly in to the host
buffers.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add int (*iscsit_validate_params)() to
struct iscsit_transport, iscsi-target
uses this callback for validating
conn operational parameters.

cxgbit.ko needs this callback to check
and update the value of
MAXXMITDATASEGMENTLENGTH.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

split iscsi_target_rx_thread() into two parts,
1. iscsi_target_rx_thread() is common to all
   transport drivers, it will call Rx function
   registered by transport driver.

2. iscsit_get_rx_pdu() is Rx function for
   ISCSI_TCP transport.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add void (*iscsit_get_rx_pdu)() to
struct iscsit_transport, iscsi-target
uses this callback to receive and
process Rx iSCSI PDUs.

cxgbit.ko needs this callback to
reuse iscsi-target Rx thread.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Acked-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add void (*iscsit_release_cmd)() to
struct iscsit_transport, iscsi-target
uses this callback to release transport
driver resources associated with an iSCSI cmd.

cxgbit.ko needs this callback to release DDP
resource and sg page in case of
PASSTHROUGH_SG_TO_MEM_NOALLOC.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Add int (*iscsit_xmit_pdu)() to
struct iscsit_transport, iscsi-target
uses this callback to transmit an
iSCSI PDU.

cxgbit.ko needs this callback to
avoid duplicating iscsit_immediate_queue()
and iscsit_response_queue() code.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This commit updates the target core ALUA and PR
modules to use the new "dbroot" attribute instead
of assuming the target database is in "/var/target".
Signed-off-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This commit adds the read-write attribute "dbroot",
in the top-level CONFIGFS (core) target directory,
normally /sys/kernel/config/target. This attribute
defaults to "/var/target" but can be changed by
writing a new pathname string to it. Changing this
attribute is only allowed when no fabric drivers
are loaded and the supplied value specifies an
existing directory.

Target modules that care about the target database
root directory will be modified to use this
attribute in a future commit.
Signed-off-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Pull misc driver fixes from Gfreg KH:
 "Here are three small fixes for some driver problems that were
  reported.  Full details in the shortlog below.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: mxs-ocotp: fix buffer overflow in read
  Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()
  misc: mic: Fix for double fetch security bug in VOP driver

Pull IIO driver fixes from Grek KH:
 "It's really just IIO drivers here, some small fixes that resolve some
  'crash on boot' errors that have shown up in the -rc series, and other
  bugfixes that are required.

  All have been in linux-next with no reported problems"

* tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: mpu6050: Fix name/chip_id when using ACPI
  iio: imu: mpu6050: fix possible NULL dereferences
  iio:adc:at91-sama5d2: Repair crash on module removal
  iio: ak8975: fix maybe-uninitialized warning
  iio: ak8975: Fix NULL pointer exception on early interrupt

Pull USB fixes from Greg KH:
 "Here are some last-remaining fixes for USB drivers to resolve issues
  that have shown up in testing.  And two new device ids as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
  usb: musb: jz4740: fix error check of usb_get_phy()
  Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"
  usb: musb: gadget: nuke endpoint before setting its descriptor to NULL
  USB: serial: cp210x: add Straizona Focusers device ids
  USB: serial: cp210x: add ID for Link ECU

Pull ARM fixes from Russell King:
 "These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup

Pull media fixes from Mauro Carvalho Chehab:

  - deadlock fixes on driver probe at exynos4-is and s43-camif drivers

  - a build breakage if media controller is enabled and USB or PCI is
   built as module.

* tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: fix builds when USB or PCI is compiled as module
  [media] media: s3c-camif: fix deadlock on driver probe()
  [media] media: exynos4-is: fix deadlock on driver probe

Pull libata fixes from Tejun Heo:
 "An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

Pull rdma fix from Doug Ledford:
 "Fix for max sector calculation in iSER"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/iser: Fix max_sectors calculation

Pull writeback fix from Jens Axboe:
 "Just a single fix for domain aware writeback, fixing a regression that
  can cause balance_dirty_pages() to keep looping while not getting any
  work done"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: Fix performance regression in wb_over_bg_thresh()

Pull x86 fixes from Ingo Molnar:
 "This contains two fixes: a boot fix for older SGI/UV systems, and an
  APIC calibration fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init

Pull power management and ACPI fixes from Rafael Wysocki:
 "Fixes for problems introduced or discovered recently (intel_pstate,
  sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
  generic device properties framework) and one fix for a hotplug-related
  deadlock in ACPICA that's been there forever, but is nasty enough.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver causing it
     to fail to restore the HWP (HW-managed P-states) configuration of
     the boot CPU after suspend-to-RAM (Rafael Wysocki).

   - Fix for two recent regressions in the intel_pstate driver, one that
     can trigger a divide by zero if the driver is accessed via sysfs
     before it manages to take the first sample and one causing it to
     fail to update a structure field used in a trace point, so the
     information coming from it is less useful (Rafael Wysocki).

   - Fix for a problem in the sti-cpufreq driver introduced during the
     4.5 cycle that causes it to break CPU PM in multi-platform kernels
     by registering cpufreq-dt (which subsequently doesn't work)
     unconditionally and preventing the driver that would actually work
     from registering (Sudeep Holla).

   - Stable-candidate fix for an ARM64 cpuidle issue causing idle state
     usage counters to be incorrectly updated for idle states that were
     not entered due to errors (James Morse).

   - Fix for a recently introduced issue in the OPP (Operating
     Performance Points) framework causing it to print bogus error
     messages for missing optional regulators (Viresh Kumar).

   - Fix for a recently introduced issue in the generic device
     properties framework that may cause it to attempt to dereferece and
     invalid pointer in some cases (Heikki Krogerus).

   - Fix for a deadlock in the ACPICA core that may be triggered by
     device (eg Thunderbolt) hotplug (Prarit Bhargava)"

* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Remove useless check
  ACPICA: Dispatcher: Update thread ID for recursive method calls
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
  device property: Avoid potential dereferences of invalid pointers

Pull scheduler fix from Ingo Molnar:
 "This contains a single fix that fixes a nohz tick stopping bug when
  mixed-poliocy SCHED_FIFO and SCHED_RR tasks are present on a runqueue"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz/full, sched/rt: Fix missed tick-reenabling bug in sched_can_stop_tick()

Pull perf fixes from Ingo Molnar:
 "This tree contains two fixes: new Intel CPU model numbers and an
  AMD/iommu uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs
  perf/x86: Add model numbers for Kabylake CPUs

Pull EFI fixes from Ingo Molnar:
 "This tree contains three fixes: a console spam fix, a file pattern fix
  and a sysfb_efi fix for a bug that triggered on older ThinkPads"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sysfb_efi: Fix valid BAR address range check
  x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT
  MAINTAINERS: Remove asterisk from EFI directory names

Pull parisc fix from Helge Deller:
 "Patch from Dmitry V Levin to fix a kernel crash when a straced process
  calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls"

* 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

Pull ARC fixes from Vineet Gupta:
 "Late in the cycle, but this has fixes for couple of issues: a PAE40
  boot crash and Arnd spotting lack of barriers in BE io-accessors.

  The 3rd patch for enabling highmem in low physical mem ;-) honestly is
  more than a "fix" but its been in works for some time, seems to be
  stable in testing and enables 2 of our customers to go forward with
  4.6 kernel.

   - Fix for PTE truncation in PAE40 builds
   - Fix for big endian IO accessors lacking IO barrier
   - Allow HIGHMEM to work with low physical addresses"

* tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: support HIGHMEM even without PAE40
  ARC: Fix PAE40 boot failures due to PTE truncation
  ARC: Add missing io barriers to io{read,write}{16,32}be()

Pull powerpc fix from Michael Ellerman:
 "Fix bad inline asm constraint in create_zero_mask() from Anton
  Blanchard"

* tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix bad inline asm constraint in create_zero_mask()

Pull drm fixes from Dave Airlie:
 "Fixes for i915, amdgpu/radeon and imx.

  The IMX fix is for an autoloading regression found in Fedora.  The
  radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware
  lockup in some circumstances with a bad mode, and a double free bug I
  took a few hours chasing down the other morning.

  The i915 fixes are across the board, all stable material, and fixing
  some hangs and suspend/resume issues, along with a live status
  regressions"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
  drm/amdgpu: make sure vertical front porch is at least 1
  drm/radeon: make sure vertical front porch is at least 1
  drm/amdgpu: set metadata pointer to NULL after freeing.
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
  drm/i915: Fix system resume if PCI device remained enabled
  drm/i915: Avoid stalling on pending flips for legacy cursor updates

Do not load one entry beyond the end of the syscall table when the
syscall number of a traced process equals to __NR_Linux_syscalls.
Similar bug with regular processes was fixed by commit 3bb457af
("[PARISC] Fix bug when syscall nr is __NR_Linux_syscalls").

This bug was found by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NHelge Deller <deller@gmx.de>

* pm-opp-fixes:
  PM / OPP: Remove useless check

* pm-cpufreq-fixes:
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform

* pm-cpuidle-fixes:
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value

* acpica-fixes:
  ACPICA: Dispatcher: Update thread ID for recursive method calls

* device-properties-fixes:
  device property: Avoid potential dereferences of invalid pointers