Make this a proper typed array. Drop the old allocate context code since
that is no longer used.

Note that the memops functions now get a struct device pointer instead of
the struct device ** that was there initially (actually a void pointer to
a struct containing only a struct device pointer).

This code is now a lot cleaner.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The allocation context is nothing more than a per-plane device pointer
to use when allocating buffers. So just provide a dev pointer in vb2_queue
for that purpose and drivers can skip allocating/releasing/filling in
the allocation context unless they require different per-plane device
pointers as used by some Samsung SoCs.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Florian Echtler <floe@butterbrot.org>
Cc: Federico Vaga <federico.vaga@gmail.com>
Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Cc: Scott Jiang <scott.jiang.linux@gmail.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: NBenoit Parrot <bparrot@ti.com>
Cc: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make the dma attributes struct part of vb2_queue. This greatly simplifies
the remainder of the patch series since the dma_contig alloc context is
now (as before) just a struct device pointer.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When using a device is read/write mode, vb2 does not handle properly the
first select/poll operation.

The reason for this, is that when this code has been refactored, some of
the operations have changed their order, and now fileio emulator is not
started.

The reintroduced check to the core is enabled by a quirk flag, that
avoids this check by other subsystems like DVB.

Fixes: 49d8ab9f ("media] media: videobuf2: Separate vb2_poll()")
Reported-by: NDimitrios Katsaros <patcherwork@gmail.com>
Cc: Junghak Sung <jh1009.sung@samsung.com>
Cc: <stable@vger.kernel.org>      # for v4.5 and up
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The number of planes in videobuf2 is specific to a buffer. In order to
verify that the planes array provided by the user is long enough, a new
vb2_buf_op is required.

Call __verify_planes_array() when the dequeued buffer is known. Return an
error to the caller if there was one, otherwise remove the buffer from the
done list.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v4.4 and later
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The vb2_thread implementation was made generic and was moved from
videobuf2-v4l2.c to videobuf2-core.c in commit af3bac1a. Unfortunately
that clearly was never tested since it broke read() causing NULL address
references.

The root cause was confused handling of vb2_buffer vs v4l2_buffer (the pb
pointer in various core functions).

The v4l2_buffer no longer exists after moving the code into the core and
it is no longer needed. However, the vb2_thread code passed a pointer to
a vb2_buffer to the core functions were a v4l2_buffer pointer was expected
and vb2_thread expected that the vb2_buffer fields would be filled in
correctly.

This is obviously wrong since v4l2_buffer != vb2_buffer. Note that the
pb pointer is a void pointer, so no type-checking took place.

This patch fixes this problem:

1) allow pb to be NULL for vb2_core_(d)qbuf. The vb2_thread code will use
   a NULL pointer here since they don't care about v4l2_buffer anyway.
2) let vb2_core_dqbuf pass back the index of the received buffer. This is
   all vb2_thread needs: this index is the index into the q->bufs array
   and vb2_thread just gets the vb2_buffer from there.
3) the fileio->b pointer (that originally contained a v4l2_buffer) is
   removed altogether since it is no longer needed.

Tested with vivid and the cobalt driver.

Cc: stable@vger.kernel.org # Kernel >= 4.3
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The handling of q->plane_sizes was wrong in vb2_core_create_bufs().
The q->plane_sizes array was global and it was overwritten by create_bufs.
So if reqbufs was called with e.g. size 100000 then q->plane_sizes[0] would
be set to 100000. If create_bufs was called afterwards with size 200000,
then q->plane_sizes[0] would be overwritten with the new value. Calling
create_bufs again for size 100000 would cause an error since 100000 is now
less than q->plane_sizes[0].

This patch fixes this problem by 1) removing q->plane_sizes and using the
vb->planes[].length field instead, and 2) by introducing a min_length field
in struct vb2_plane. This field is set to the plane size as returned by
the queue_setup op and is the minimum required plane size. So user pointers
or dmabufs should all be at least this size.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This ops can never fail, so make these void functions.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Move things related with vb2 file I/O and vb2_thread without doing any
functional changes. After that, videobuf2-internal.h is removed because
it is not necessary any more.
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add copy_timestamp to struct vb2_queue as a flag set if vb2-core should
copy timestamps.
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer
for common use, and change its type to u64 in order to handling
y2038 problem. This patch also includes all device drivers' changes related to
this restructuring.
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The queue_setup callback has a void pointer that is just for V4L2
and is the pointer to the v4l2_format struct that was passed to
VIDIOC_CREATE_BUFS. The idea was that drivers would use the information
from that struct to buffers suitable for the requested format.

After the vb2 split series this pointer is now a void pointer,
which is ugly, and the reality is that all existing drivers will
effectively just look at the sizeimage field of v4l2_format.

To make this more generic the queue_setup callback is changed:
the void pointer is dropped, instead if the *num_planes argument
is 0, then use the current format size, if it is non-zero, then
it contains the number of requested planes and the sizes array
contains the requested sizes. If either is unsupported, then return
-EINVAL, otherwise use the requested size(s).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Move v4l2-specific stuff from videobu2-core to videobuf2-v4l2
without doing any functional changes.
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Prepare to divide videobuf2
- Separate vb2 trace events from v4l2 trace event.
- Make wrapper functions that will move to v4l2-side.
- Make vb2_core_* functions that will remain in core-side.
- Add a callback function table for buffer operation which makes vb2-core
  to be able to invoke a v4l2-side functions.
- Rename internal functions as vb2_*.
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Simple changes that replace v4l2-specific data with vb2 data
in videobuf2-core.

enum v4l2_buf_type --> int
enum v4l2_memory --> enum vb2_memory
VIDEO_MAX_FRAME --> VB2_MAX_FRAME
VIDEO_MAX_PLANES --> VB2_MAX_PLANES
struct v4l2_fh *owner --> void *owner
V4L2_TYPE_IS_MULTIPLANAR() --> is_multiplanar
V4L2_TYPE_IS_OUTPUT() --> is_output
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Replace struct v4l2_format * with void * to make queue_setup()
for common use.
And then, modify all device drivers related with this change.
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: fix missing const in fimc-lite.c]
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Right now, "private:" tag should be lower-case, otherwise the
scripts/kernel-doc won't do the right thing.

Also, no fields after "private:" should be documented. As we don't
want to strip the documentation, let's untag. This way, it will
be seen only at the file, and not at the DocBooks.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

	include/media/videobuf2-core.h:112: warning: No description found for parameter 'get_dmabuf'
	include/media/videobuf2-core.h:146: warning: No description found for parameter 'm'
	include/media/videobuf2-core.h:146: warning: Excess struct/union/enum/typedef member 'mem_offset' description in 'vb2_plane'

There are still several warnings, but those are hard to fix,
as they're actually a bug at DocBook. Those should be fixed on
separate patches.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer.

Add new member variables - bytesused, length, offset, userptr, fd,
data_offset - to struct vb2_plane in order to cover all information
of v4l2_plane.
struct vb2_plane {
        <snip>
        unsigned int            bytesused;
        unsigned int            length;
        union {
                unsigned int    offset;
                unsigned long   userptr;
                int             fd;
        } m;
        unsigned int            data_offset;
}

Replace v4l2_buf with new member variables - index, type, memory - which
are common fields for buffer management.
struct vb2_buffer {
        <snip>
        unsigned int            index;
        unsigned int            type;
        unsigned int            memory;
        unsigned int            num_planes;
        struct vb2_plane        planes[VIDEO_MAX_PLANES];
        <snip>
};

v4l2 specific fields - flags, field, timestamp, timecode,
sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c
struct vb2_v4l2_buffer {
        struct vb2_buffer       vb2_buf;

        __u32                   flags;
        __u32                   field;
        struct timeval          timestamp;
        struct v4l2_timecode    timecode;
        __u32                   sequence;
};
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use.
And replace videobuf2-core.h with videobuf2-v4l2.h.
This renaming change should be accompanied by the modifications
of all device drivers that include videobuf2-core.h.
It can be done with just running this shell script.

replace()
{
str1=$1
str2=$2
dir=$3
for file in $(find $dir -name *.h -o -name *.c -o -name Makefile)
do
    echo $file
    sed "s/$str1/$str2/g" $file > $file.out
    mv $file.out $file
done
}

replace "videobuf2-core" "videobuf2-v4l2" "include/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/"
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Most of the stuff at videobuf2-core are ok for adding it to
DocBook.

Two notes here:
1) As videobuf2-core will be soon be changed, better to
   not spend too much efforts right now, as things will
   change soon;

2) struct vb2_queue has a number of private elements that are
   documented. As Kernel nano documentation format handles
   "private:" arguments, we need to put them on a separate
   comment block or to remove. Keeping the comments is
   obviously better ;)
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: NJonathan Corbet <corbet@lwn.net>

Buffers can be returned back to videobuf2 in driver's streamon handler. In
this case vb2_buffer_done() with buffer state VB2_BUF_STATE_QUEUED will
cause the driver's buf_queue vb2 operation to be called, queueing the same
buffer again only to be returned to videobuf2 using vb2_buffer_done() and so
on.

Add a new buffer state VB2_BUF_STATE_REQUEUEING which, when used as the
state argument to vb2_buffer_done(), will result in buffers queued to the
driver. Using VB2_BUF_STATE_QUEUED will leave the buffer to videobuf2, as it
was before "[media] vb2: allow requeuing buffers while streaming".

Fixes: ce0eff01 ("[media] vb2: allow requeuing buffers while streaming")

[mchehab@osg.samsung.com: fix warning: enumeration value 'VB2_BUF_STATE_REQUEUEING' not handled in switch]
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v4.1
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If the last buffer was dequeued from a capture queue, let poll return
immediately and let DQBUF return -EPIPE to signal there will no more
buffers to dequeue until STREAMOFF.
The driver signals the last buffer by setting the V4L2_BUF_FLAG_LAST.
To reenable dequeuing on the capture queue, the driver must explicitly
call vb2_clear_last_buffer_queued. The last buffer queued flag is
cleared automatically during STREAMOFF.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The vb2: fix bytesused == 0 handling (8a75ffb8) patch changed the behavior
of __fill_vb2_buffer function, so that if bytesused is 0 it is set to the
size of the buffer. However, bytesused set to 0 is used by older codec
drivers as as indication used to mark the end of stream.

To keep backward compatibility, this patch adds a flag passed to the
vb2_queue_init function - allow_zero_bytesused. If the flag is set upon
initialization of the queue, the videobuf2 keeps the value of bytesused
intact in the OUTPUT queue and passes it to the driver.
Reported-by: NNicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch splits the io_flags member of vb2_queue into a bit field.
Instead of an enum with flags separate bit fields were introduced.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This is needed for the next patch where the dma-sg alloc memop needs
to know the dma_dir.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The 'write' argument is very ambiguous. I first assumed that if it is 1,
then we're doing video output but instead it meant the reverse.

Since it is used to setup the dma_dir value anyway it is now replaced by
the correct dma_dir value which is unambiguous.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Document that drivers can access/modify the buffer contents in buf_prepare
and buf_finish. That was not clearly stated before.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The buffer flags are incorrectly referred to as V4L2_BUF_FLAGS_* instead
of V4L2_BUF_FLAG_* in comments. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The recent conversion of saa7134 to vb2 unconvered a poll() bug that
broke the teletext applications alevt and mtt. These applications
expect that calling poll() without having called VIDIOC_STREAMON will
cause poll() to return POLLERR. That did not happen in vb2.

This patch fixes that behavior. It also fixes what should happen when
poll() is called when STREAMON is called but no buffers have been
queued. In that case poll() will also return POLLERR, but only for
capture queues since output queues will always return POLLOUT
anyway in that situation.

This brings the vb2 behavior in line with the old videobuf behavior.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The comment for start_streaming that tells the developer with which vb2 state
buffers should be returned to vb2 gave the wrong state. Very confusing.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

this patch adds a helper to get the status if start_streaming()
was called successfully.
Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The following lockdep warning has been there ever since commit a517cca6
one year ago:

[  403.117947] ======================================================
[  403.117949] [ INFO: possible circular locking dependency detected ]
[  403.117953] 3.16.0-rc6-test-media #961 Not tainted
[  403.117954] -------------------------------------------------------
[  403.117956] v4l2-ctl/15377 is trying to acquire lock:
[  403.117959]  (&dev->mutex#3){+.+.+.}, at: [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.117974]
[  403.117974] but task is already holding lock:
[  403.117976]  (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0
[  403.117987]
[  403.117987] which lock already depends on the new lock.
[  403.117987]
[  403.117990]
[  403.117990] the existing dependency chain (in reverse order) is:
[  403.117992]
[  403.117992] -> #1 (&mm->mmap_sem){++++++}:
[  403.117997]        [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0
[  403.118006]        [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30
[  403.118010]        [<ffffffff810d9da7>] lock_acquire+0xa7/0x160
[  403.118014]        [<ffffffff8118c9ec>] might_fault+0x7c/0xb0
[  403.118018]        [<ffffffffa0028a25>] video_usercopy+0x425/0x610 [videodev]
[  403.118028]        [<ffffffffa0028c25>] video_ioctl2+0x15/0x20 [videodev]
[  403.118034]        [<ffffffffa0022764>] v4l2_ioctl+0x184/0x1a0 [videodev]
[  403.118040]        [<ffffffff811d77d0>] do_vfs_ioctl+0x2f0/0x4f0
[  403.118307]        [<ffffffff811d7a51>] SyS_ioctl+0x81/0xa0
[  403.118311]        [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b
[  403.118319]
[  403.118319] -> #0 (&dev->mutex#3){+.+.+.}:
[  403.118324]        [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0
[  403.118329]        [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0
[  403.118333]        [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30
[  403.118336]        [<ffffffff810d9da7>] lock_acquire+0xa7/0x160
[  403.118340]        [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640
[  403.118344]        [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118349]        [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev]
[  403.118354]        [<ffffffff81197270>] mmap_region+0x3d0/0x5d0
[  403.118359]        [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400
[  403.118363]        [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0
[  403.118366]        [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0
[  403.118369]        [<ffffffff810085c2>] SyS_mmap+0x22/0x30
[  403.118376]        [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b
[  403.118381]
[  403.118381] other info that might help us debug this:
[  403.118381]
[  403.118383]  Possible unsafe locking scenario:
[  403.118383]
[  403.118385]        CPU0                    CPU1
[  403.118387]        ----                    ----
[  403.118388]   lock(&mm->mmap_sem);
[  403.118391]                                lock(&dev->mutex#3);
[  403.118394]                                lock(&mm->mmap_sem);
[  403.118397]   lock(&dev->mutex#3);
[  403.118400]
[  403.118400]  *** DEADLOCK ***
[  403.118400]
[  403.118403] 1 lock held by v4l2-ctl/15377:
[  403.118405]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0
[  403.118411]
[  403.118411] stack backtrace:
[  403.118415] CPU: 0 PID: 15377 Comm: v4l2-ctl Not tainted 3.16.0-rc6-test-media #961
[  403.118418] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
[  403.118420]  ffffffff82a6c9d0 ffff8800af37fb00 ffffffff819916a2 ffffffff82a6c9d0
[  403.118425]  ffff8800af37fb40 ffffffff810d5715 ffff8802308e4200 0000000000000000
[  403.118429]  ffff8802308e4a48 ffff8802308e4a48 ffff8802308e4200 0000000000000001
[  403.118433] Call Trace:
[  403.118441]  [<ffffffff819916a2>] dump_stack+0x4e/0x7a
[  403.118445]  [<ffffffff810d5715>] print_circular_bug+0x1d5/0x2a0
[  403.118449]  [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0
[  403.118455]  [<ffffffff8119c172>] ? find_vmap_area+0x42/0x70
[  403.118459]  [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0
[  403.118463]  [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30
[  403.118468]  [<ffffffff810d9da7>] lock_acquire+0xa7/0x160
[  403.118472]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118476]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118480]  [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640
[  403.118484]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118488]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118493]  [<ffffffff810d8055>] ? mark_held_locks+0x75/0xa0
[  403.118497]  [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118502]  [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev]
[  403.118506]  [<ffffffff81197270>] mmap_region+0x3d0/0x5d0
[  403.118510]  [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400
[  403.118513]  [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0
[  403.118517]  [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0
[  403.118521]  [<ffffffff810085c2>] SyS_mmap+0x22/0x30
[  403.118525]  [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b

The reason is that vb2_fop_mmap and vb2_fop_get_unmapped_area take the core lock
while they are called with the mmap_sem semaphore held. But elsewhere in the code
the core lock is taken first but calls to copy_to/from_user() can take the mmap_sem
semaphore as well, potentially causing a classical A-B/B-A deadlock.

However, the mmap/get_unmapped_area calls really shouldn't take the core lock
at all. So what would happen if they don't take the core lock anymore?

There are two situations that need to be taken into account: calling mmap while
new buffers are being added and calling mmap while buffers are being deleted.

The first case works almost fine without a lock: in all cases mmap relies on
correctly filled-in q->num_buffers/q->num_planes values and those are only
updated by reqbufs and create_buffers *after* any new buffers have been
initialized completely. Except in one case: if an error occurred while allocating
the buffers it will increase num_buffers and rely on __vb2_queue_free to
decrease it again. So there is a short period where the buffer information
may be wrong.

The second case definitely does pose a problem: buffers may be in the process
of being deleted, without the internal structure being updated.

In order to fix this a new mutex is added to vb2_queue that is taken when
buffers are allocated or deleted, and in vb2_mmap. That way vb2_mmap won't
get stale buffer data. Note that this is a problem only for MEMORY_MMAP, so
even though __qbuf_userptr and __qbuf_dmabuf also mess around with buffers
(mem_priv in particular), this doesn't clash with vb2_mmap or
vb2_get_unmapped_area since those are MMAP specific.

As an additional bonus the hack in __buf_prepare, the USERPTR case, can be
removed as well since mmap() no longer takes the core lock.

All in all a much cleaner solution.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

A lot of work was done in vb2 to regulate how drivers and the vb2 core handle
buffer ownership, but inexplicably the videobuf2-core.h comments were never
updated. Do so now. The same was true for the replacement of the -ENOBUFS
mechanism by the min_buffers_needed field.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When a fatal error occurs that render the device unusable, the only
options for a driver to signal the error condition to userspace is to
set the V4L2_BUF_FLAG_ERROR flag when dequeuing buffers and to return an
error from the buffer prepare handler when queuing buffers.

The buffer error flag indicates a transient error and can't be used by
applications to detect fatal errors. Returning an error from vb2_qbuf()
is thus the only real indication that a fatal error occurred. However,
this is difficult to handle for multithreaded applications that requeue
buffers from a thread other than the control thread. In particular the
poll() call in the control thread will not notify userspace of the
error.

This patch adds an explicit mechanism to report fatal errors to
userspace. Drivers can call the vb2_queue_error() function to signal a
fatal error. From this moment on, buffer preparation will return -EIO to
userspace, and vb2_poll() will set the POLLERR flag and return
immediately. The error flag is cleared when cancelling the queue, either
at stream off time (through vb2_streamoff) or when releasing the queue
with vb2_queue_release().
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When suspending a device while a video stream is active all buffers
marked as done but not dequeued yet will be kept across suspend and
given back to userspace after resume. This will result in outdated
buffers being dequeued.

Introduce a new vb2 function to mark all done buffers as erroneous
instead, to be used by drivers at resume time.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The vb2 core ignores any return code from the stop_streaming op.
And there really isn't anything it can do anyway in case of an error.
So change the return type to void and update any drivers that implement it.

The int return gave drivers the idea that this operation could actually
fail, but that's really not the case.

The pwc amd sdr-msi3101 drivers both had this construction:

        if (mutex_lock_interruptible(&s->v4l2_lock))
                return -ERESTARTSYS;

This has been updated to just call mutex_lock(). The stop_streaming op
expects this to really stop streaming and I very much doubt this will
work reliably if stop_streaming just returns without really stopping the
DMA.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

In order to implement vb2 DVB support you need to be able to start
a kernel thread that queues and dequeues buffers, calling a callback
function for every buffer. This patch adds support for that.

It's based on drivers/media/v4l2-core/videobuf-dvb.c, but with all the DVB
specific stuff stripped out, thus making it much more generic.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Added a vb2_fileio_is_active inline function that returns true if fileio
is in progress. Check for this too in mmap() (you don't want apps mmap()ing
buffers used by fileio) and expbuf() (same reason).

In addition drivers should be able to check for this in queue_setup() to
return an error if an attempt is made to read() or write() with
V4L2_FIELD_ALTERNATE being configured. This is illegal (there is no way
to pass the TOP/BOTTOM information around using file I/O).

However, in order to be able to check for this the init_fileio function
needs to set q->fileio early on, before the buffers are allocated. So switch
to using internal functions (__reqbufs, vb2_internal_qbuf and
vb2_internal_streamon) to skip the fileio check. Well, that's why the internal
functions were created...
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

In commit 02f142ec support was added to
start_streaming to return -ENOBUFS if insufficient buffers were queued
for the DMA engine to start. The vb2 core would attempt calling
start_streaming again if another buffer would be queued up.

Later analysis uncovered problems with the queue management if start_streaming
would return an error: the buffers are enqueued to the driver before the
start_streaming op is called, so after an error they are never returned to
the vb2 core. The solution for this is to let the driver return them to
the vb2 core in case of an error while starting the DMA engine. However,
in the case of -ENOBUFS that would be weird: it is not a real error, it
just says that more buffers are needed. Requiring start_streaming to give
them back only to have them requeued again the next time the application
calls QBUF is inefficient.

This patch changes this mechanism: it adds a 'min_buffers_needed' field
to vb2_queue that drivers can set with the minimum number of buffers
required to start the DMA engine. The start_streaming op is only called
if enough buffers are queued. The -ENOBUFS handling has been dropped in
favor of this new method.

Drivers are expected to return buffers back to vb2 core with state QUEUED
if start_streaming would return an error. The vb2 core checks for this
and produces a warning if that didn't happen and it will forcefully
reclaim such buffers to ensure that the internal vb2 core state remains
consistent and all buffer-related resources have been correctly freed
and all op calls have been balanced.

__reqbufs() has been updated to check that at least min_buffers_needed
buffers could be allocated. If fewer buffers were allocated then __reqbufs
will free what was allocated and return -ENOMEM. Based on a suggestion from
Pawel Osciak.

__create_bufs() doesn't do that check, since the use of __create_bufs
assumes some advance scenario where the user might want more control.
Instead streamon will check if enough buffers were allocated to prevent
streaming with fewer than the minimum required number of buffers.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>