early_printk is a so much saner thing.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If R4k counter was used for hpt_timer and interrupt source,
c0_hpt_timer_init() initializes the c0_compare register.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The generic rtc-ds1742 driver can be used for RBTX4927 and JMR3927
(with __swizzle_addr trick).  This patch also removes MIPS local
DS1742 stuff.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This was causing oprofile to fail on R10000, R12000, R14000.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Big endian RMs uses a different mc146818_decode_year than little endian RMs
Correct mc146818_decode_year for years before 2000
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: add CONFIG_PM to libata core layer
  libata: add missing CONFIG_PM in LLDs
  libata: add missing PM callbacks
  pata_qdi: Fix initialisation
  [libata] pata_cmd64x: fix driver description in comments
  [libata] pata_{legacy,sc1200,sl82c105}: add missing hooks
  [libata] change master/slave IDENTIFY order
  libata-core: Fix simplex handling

Noticed by Doug Nazar (via David Miller).
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The information contained within platform_data should be self-contained.
Replace the pointer to a MAC address with the actual MAC address in
struct mv643xx_eth_platform_data.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Commit 908b637f removed ETH_DMA_ALIGN
but missed a usage of it in a macro, which broke the build.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This missing line caused transmit errors on the Qlogic 4032 chip.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NMithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch adds a "-ko" tag to the driver version.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix copyright and license ("regents" should not have ever been used).
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

No need to stop tc35815 before resetting the board.  This fixes the
build of tc35815 as a module.  This also means there is no caller of
tc35815_killall left, so remove that function also.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Conditionalize all PM related stuff in libata core layer using
CONFIG_PM.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add missing #ifdef CONFIG_PM conditionals around all PM related parts
in libata LLDs.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Some LLDs were missing scsi device PM callbacks while having host/port
suspend support.  Add missing ones.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Based upon a report by Andrew Walrond.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If you'll recall, over a year ago, I pointed out that the current
Radeon driver erroneously returns -EINVAL for valid blanking codes,
here is a link to that thread:

	http://lkml.org/lkml/2006/1/28/6

No other driver does this, and it confuses the X server into thinking
that the device does not support blanking properly.

I looked again and there is simply no reason for the Radeon driver to
return -EINVAL for FB_BLANK_NORMAL.  It claims it wants to do this in
order to convince fbcon to blank in software, right here:

			if (fb_blank(info, blank))
				fbcon_generic_blank(vc, info, blank);

to software blank the screen.  But it only causes that to happen
in the FB_BLANK_NORMAL case.

That makes no sense because the Radeon code does this:

		val |= CRTC_DISPLAY_DIS;

in the FB_BLANK_NORMAL case so should be blanking the hardware, and
there is therefore no reason to SW blank by returning -EINVAL.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NAntonino Daplas <adaplas@gmail.com>

Another powerpc compatibility item, this will allow us to share
more code with them.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just leave them as zero if we couldn't calculate it.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We mistakedly modify 'bus' in the innermost loop.  What
should happen is that at each register index iteration,
we start with the same 'bus'.

So preserve it's value at the top level, and use a loop
local variable 'dbus' for iteration.

This bug causes registers other than the first to be
decoded improperly.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The QDI init code contains some bugs which mean it only works if you have
a test setup that causes both a successful and failed probe. Fix this

Found by Philip Guo

(Who found it working on code analysis tools not running VLB IDE
controllers)
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Trivial comment fix, taken out of a larger Alan Cox patch.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Alan Cox noticed several hooks in pata_* drivers were missing, when
he authored his ->cable_detect hook patches.  This patch extracts
just those fixes from Alan's patches, adding the necessary hooks
(usually ->freeze, ->thaw, and ->post_internal_cmd) to the drivers.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

2.6.21-rc has horrible problems with libata and PATA cable types (and
thus speeds). This occurs because Tejun fixed a pile of other bugs and
we now do cable detect enforcement for drive side detection properly.

Unfortunately we don't do the process around cable detection right. Tejun
identified the problem and pointed to the right Annex in the spec, this patch
implements the needed changes.

The basic requirement is that we have to identify the slave before the
master.

The patch switches the identify order so that we can do the drive side
detection correctly.

[NOTE: patch and description extracted from a larger work written
and signed-off-by Alan Cox]
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The initial simplex handling code is fooled if you suspend and resume.
This also causes problems with some single channel controllers which
claim to be simplex.

The fix is fairly simple, instead of keeping a flag to remember if we
gave away the simplex channel we remember the actual owner. As the owner
is always part of the host_set we don't even need a refcount.

Knowing the owner also means we can reassign simplex DMA channels in
future hotplug code etc if we need to
Signed-off-by: NAlan Cox <alan@redhat.com>
(and a signed-off for the patch I sent before while I remember)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: improve spurious SDB FIS handling
  ahci/pata_jmicron: match class not function number
  jmicron ATA: reimplement jmicron ATA quirk
  pata_jmicron: drop unnecessary device programming in [re]init
  libata: blacklist FUJITSU MHT2060BH for NCQ
  sata_sil24: kill unused local variable idx in sil24_fill_sg()
  libata: clear drvdata in ata_host_release(), take#2

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle button
  HID: add git tree information to MAINTAINERS
  HID: fix broken Logitech S510 keyboard report descriptor; make extra keys work
  HID: fix possible double-free on error path in hid parser
  HID: hid-debug.c should #include <linux/hid-debug.h>
  HID: fix bug in zeroing the last field byte in output reports
  USB HID: use CONFIG_HID_DEBUG for outputting report descriptor
  USB HID: Fix USB vendor and product IDs endianness for USB HID devices

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix parport_pc build.
  [SPARC64]: Update defconfig.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: Fix minisock tcp_create_openreq_child() typo.
  [TCP]: Document several sysctls.
  [NET]: Fix kfree(skb)
  [NET]: Handle disabled preemption in gfp_any()
  [BRIDGE]: Fix locking of set path cost.
  [IPV6]: /proc/net/anycast6 unbalanced inet6_dev refcnt
  [IPX]: Remove ancient changelog
  [IPX]: Remove outdated information from Kconfig
  [NET]: Revert socket.h/stat.h ifdef hacks.
  [IPV6]: anycast refcnt fix
  [XFRM] xfrm_user: Fix return values of xfrm_add_sa_expire.

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5305): Mark VIDIOC_DBG_S/G_REGISTER as experimental
  V4L/DVB (5271): Add VIDIOC_TRY_ENCODER_CMD and VIDIOC_ENCODER_CMD ioctls.
  V4L/DVB (5270): Add VIDIOC_G_ENC_INDEX ioctl
  V4L/DVB (5276): Cxusb: fix firmware patch for big endian systems
  V4L/DVB (5258): Cafe_ccic: fix compiler warning
  V4L/DVB (5295): Digitv: open nxt6000 i2c_gate for TDED4 tuner handling
  V4L/DVB (5304): Improve chip matching in v4l2_register
  V4L/DVB (5255): Fix cx25840 firmware loading.