Fix deadlocking during concurrent receive and transmit operations on SMP
platforms caused by the use of incorrect lock: on transmit 'tx_lock'
spinlock should be used instead of 'lock' which is used for receive
operation.

This fix is applicable to kernel versions starting from v2.15.
Signed-off-by: NAurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit cdfdef75 ("cpumask: only allocate nr_cpumask_bits."),
this comment above cpumask_size() is no longer relevant.
Signed-off-by: NEric Biggers <ebiggers3@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:

 - The fs.suid_dumpable sysctl is set to 2.
 - The kernel.core_pattern sysctl's value starts with "/". (Systems
   where kernel.core_pattern starts with "|/" are not affected.)
 - Unprivileged user namespace creation is permitted. (This is
   true on Linux >=3.8, but some distributions disallow it by
   default using a distro patch.)

Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.

To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.
Signed-off-by: NJann Horn <jann@thejh.net>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This test-case (simplified version of generated by syzkaller)

	#include <unistd.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>

	void test(void)
	{
		for (;;) {
			if (fork()) {
				wait(NULL);
				continue;
			}

			ptrace(PTRACE_SEIZE, getppid(), 0, 0);
			ptrace(PTRACE_INTERRUPT, getppid(), 0, 0);
			_exit(0);
		}
	}

	int main(void)
	{
		int np;

		for (np = 0; np < 8; ++np)
			if (!fork())
				test();

		while (wait(NULL) > 0)
			;
		return 0;
	}

triggers the 2nd WARN_ON_ONCE(!signr) warning in do_jobctl_trap().  The
problem is that __ptrace_unlink() clears task->jobctl under siglock but
task->ptrace is cleared without this lock held; this fools the "else"
branch which assumes that !PT_SEIZED means PT_PTRACED.

Note also that most of other PTRACE_SEIZE checks can race with detach
from the exiting tracer too.  Say, the callers of ptrace_trap_notify()
assume that SEIZED can't go away after it was checked.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

FAT has long supported its own default file name encoding config
setting, separate from CONFIG_NLS_DEFAULT.

However, if UTF-8 encoded file names are desired FAT character set
should not be set to utf8 since this would make file names case
sensitive even if case insensitive matching is requested.  Instead,
"utf8" mount options should be provided to enable UTF-8 file names in
FAT file system.

Unfortunately, there was no possibility to set the default value of this
option so on UTF-8 system "utf8" mount option had to be added manually
to most FAT mounts.

This patch adds config option to set such default value.
Signed-off-by: NMaciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

x86's is_compat_task always checked the current syscall type, not the
task type.  It has no non-arch users any more, so just remove it to
avoid confusion.

On x86, nothing should really be checking the task ABI.  There are
legitimate users for the syscall ABI and for the mm ABI.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

uhid changes the format expected in write() depending on bitness.  It
should check the syscall bitness directly.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: David Herrmann <dh.herrmann@googlemail.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The input compat code should work like all other compat code: for 32-bit
syscalls, use the 32-bit ABI and for 64-bit syscalls, use the 64-bit
ABI.  We have a helper for that (in_compat_syscall()): just use it.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

amdkfd wants to know syscall type, not task type.  Check directly.

Unfortunately, amdkfd is making nasty assumptions that a process'
bitness is a well-defined constant thing.  This isn't the case on x86.
I don't know how much this matters, but this patch has no effect on
generated code on x86, so amdkfd is equally broken with and without this
patch.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This should make no difference on any architecture, as x86's historical
is_compat_task behavior really did check whether the calling syscall was
a compat syscall.  x86's is_compat_task is going away, though.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Firewire was using is_compat_task to check whether it was in a compat
ioctl or a non-compat ioctl.  Use is_compat_syscall instead so it works
properly on all architectures.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code wants to prevent compat code from receiving messages.  Use
in_compat_syscall for this.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SCTP unfortunately has a different ABI for SCTP_SOCKOPT_CONNECTX3 for
32-bit and 64-bit callers.  Use in_compat_syscall to correctly
distinguish them on all architectures.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ext4 treats directory offsets differently for 32-bit and 64-bit callers.
Check the caller type using in_compat_syscall, not is_compat_task.  This
changes behavior on SPARC slightly.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

AFAICT, lustre is trying to determine syscall bitness.  Use the new
accessor.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Except on SPARC, this is what the code always did.  SPARC compat seccomp
was buggy, although the impact of the bug was limited because SPARC
32-bit and 64-bit syscall numbers are the same.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users of the 32-bit ptrace() ABI expect the full 32-bit ABI.  siginfo
translation should check ptrace() ABI, not caller task ABI.

This is an ABI change on SPARC.  Let's hope that no one relied on the
old buggy ABI.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Seccomp wants to know the syscall bitness, not the caller task bitness,
when it selects the syscall whitelist.

As far as I know, this makes no difference on any architecture, so it's
not a security problem.  (It generates identical code everywhere except
sparc, and, on sparc, the syscall numbering is the same for both ABIs.)
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sparc's syscall_get_arch was buggy: it returned the task arch, not the
syscall arch.  This could confuse seccomp and audit.

I don't think this is as bad for seccomp as it looks: sparc's 32-bit and
64-bit syscalls are numbered the same.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On sparc64 compat-enabled kernels, any task can make 32-bit and 64-bit
syscalls.  is_compat_task returns true in 32-bit tasks, which does not
necessarily imply that the current syscall is 32-bit.

Provide an in_compat_syscall implementation that checks whether the
current syscall is compat.

As far as I know, sparc is the only architecture on which is_compat_task
checks the compat status of the task and on which the compat status of a
syscall can differ from the compat status of the task.  On x86,
is_compat_task checks the syscall type, not the task type.

[akpm@linux-foundation.org: add comment, per Sam]
[akpm@linux-foundation.org: update comment, per Andy]
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A lot of code currently abuses is_compat_task to determine this.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: David Herrmann <dh.herrmann@googlemail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When new timeout is written to /proc/sys/kernel/hung_task_timeout_secs,
khungtaskd is interrupted and again sleeps for full timeout duration.

This means that hang task will not be checked if new timeout is written
periodically within old timeout duration and/or checking of hang task
will be delayed for up to previous timeout duration.  Fix this by
remembering last time khungtaskd checked hang task.

This change will allow other watchdog tasks (if any) to share khungtaskd
by sleeping for minimal timeout diff of all watchdog tasks.  Doing more
watchdog tasks from khungtaskd will reduce the possibility of printk()
collisions by multiple watchdog threads.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b430e9d1 ("remove compressed copy from zram in-memory")
applied swap_slot_free_notify call in *end_swap_bio_read* to remove
duplicated memory between zram and memory.

However, with the introduction of rw_page in zram: 8c7f0102 ("zram:
implement rw_page operation of zram"), it became void because rw_page
doesn't need bio.

Memory footprint is really important in embedded platforms which have
small memory, for example, 512M) recently because it could start to kill
processes if memory footprint exceeds some threshold by LMK or some
similar memory management modules.

This patch restores the function for rw_page, thereby eliminating this
duplication.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: karam.lee <karam.lee@lge.com>
Cc: <sangseok.lee@lge.com>
Cc: Chan Jeong <chan.jeong@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This document will describe OCFS2 online file check feature.  OCFS2 is
often used in high-availaibility systems.  However, OCFS2 usually
converts the filesystem to read-only when encounters an error.  This may
not be necessary, since turning the filesystem read-only would affect
other running processes as well, decreasing availability.

Then, a mount option (errors=continue) is introduced, which would return
the -EIO errno to the calling process and terminate furhter processing
so that the filesystem is not corrupted further.  The filesystem is not
converted to read-only, and the problematic file's inode number is
reported in the kernel log.  The user can try to check/fix this file via
online filecheck feature.
Signed-off-by: NGang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement online check or fix inode block during reading a inode block
to memory.
Signed-off-by: NGang He <ghe@suse.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create online file check sysfile when ocfs2 mount, remove the related
sysfile when ocfs2 umount.
Signed-off-by: NGang He <ghe@suse.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement online file check sysfile interfaces, e.g. how to create the
related sysfile according to device name, how to display/handle file
check request from the sysfile.
Signed-off-by: NGang He <ghe@suse.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When there are errors in the ocfs2 filesystem, they are usually
accompanied by the inode number which caused the error.  This inode
number would be the input to fixing the file.  One of these options
could be considered:

A file in the sys filesytem which would accept inode numbers.  This
could be used to communication back what has to be fixed or is fixed.
You could write:

  $# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/check

or

  $# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/fix

Compare with second version, I re-design filecheck sysfs interfaces,
there are three sysfs files (check, fix and set) under filecheck
directory (see above), sysfs will accept only one argument <inode>.
Second, I adjust some code in ocfs2_filecheck_repair_inode_block()
function according to upstream feedback, we cannot just add VALID_FL
flag back as a inode block fix, then we will not fix this field
corruption currently until having a complete solution.  Compare with
first version, I use strncasecmp instead of double strncmp functions.
Second, update the source file contribution vendor.

This patch (of 4):

Export ocfs2_kset object from ocfs2_stackglue kernel module, then online
file check code will create the related sysfiles under ocfs2_kset
object.  We're exporting this because it's built in ocfs2_stackglue.ko.
Signed-off-by: NGang He <ghe@suse.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull btrfs updates from Chris Mason:
 "We have a good sized cleanup of our internal read ahead code, and the
  first series of commits from Chandan to enable PAGE_SIZE > sectorsize

  Otherwise, it's a normal series of cleanups and fixes, with many
  thanks to Dave Sterba for doing most of the patch wrangling this time"

* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (82 commits)
  btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums
  btrfs: Fix misspellings in comments.
  btrfs: Print Warning only if ENOSPC_DEBUG is enabled
  btrfs: scrub: silence an uninitialized variable warning
  btrfs: move btrfs_compression_type to compression.h
  btrfs: rename btrfs_print_info to btrfs_print_mod_info
  Btrfs: Show a warning message if one of objectid reaches its highest value
  Documentation: btrfs: remove usage specific information
  btrfs: use kbasename in btrfsic_mount
  Btrfs: do not collect ordered extents when logging that inode exists
  Btrfs: fix race when checking if we can skip fsync'ing an inode
  Btrfs: fix listxattrs not listing all xattrs packed in the same item
  Btrfs: fix deadlock between direct IO reads and buffered writes
  Btrfs: fix extent_same allowing destination offset beyond i_size
  Btrfs: fix file loss on log replay after renaming a file and fsync
  Btrfs: fix unreplayable log after snapshot delete + parent dir fsync
  Btrfs: fix lockdep deadlock warning due to dev_replace
  btrfs: drop unused argument in btrfs_ioctl_get_supported_features
  btrfs: add GET_SUPPORTED_FEATURES to the control device ioctls
  btrfs: change max_inline default to 2048
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
      - Fix ABI regression of MMC BLK ioctl
      - Remove the unused MMC_DATA_STREAM flag
      - Enable asynchronous system PM for the host device
      - Minor fixes and clean-ups

  SDHCI host:
     Throughout the years, the numbers of SDHCI variants have increased
     and so has also the numbers of SDHCI callbacks/quirks.  The purpose
     of these callbacks/quirks were to enable SDHCI to deal with variant
     specific requirements, but unfortunate this method didn't scale.
     Instead we have ended up with a mess.  Not only did the code become
     suboptimal but also highly fragile.

     Lately many discussions of how to move forward with SDHCI has taken
     place at the MMC mailing list.  Step by step, we aim to turn
     SDHCI's common code into a set of library functions.  This will
     enable for optimizations and allow some of the existing callbacks
     and quirks to be removed, which also should help to make the code
     less fragile.

     Therefore I am also really pleased to announce that Adrian Hunter
     (Intel) has volunteered to step in as the maintainer for SDHCI.

     Future wise, I hope the community around SDHCI will continue to
     grow and that this release cycle can be the starting point of
     moving SDHCI into a better shape.  As a matter of fact, already in
     this cycle the re-factoring has begun, but of course there are also
     fixes and new features included.  Some highlights:

      - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP
      - sdhci-acpi: Add support for QCOM controllers
      - sdhci-pic32: Add new SDHCI variant for PIC32MZDA

  Other hosts:
      - atmel-mci: Fix a NULL pointer dereference
      - mediatek: Add SD write-protect support
      - mmc_spi: Fix card detect in GPIO case
      - tmio/sdhi: Add r8a7795 support
      - tmio/sdhi: Some fixes and clean-ups
      - dw_mmc: Add HW reset support
      - dw_mmc: Some fixes and clean-ups
      - sunxi: Add support for MMC DDR52 mode"

* tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc: (123 commits)
  mmc: sdhci-of-at91: fix wake-up issue when using runtime pm
  mmc: sdhci-pci: Do not set DMA mask in enable_dma()
  mmc: sdhci-acpi: Remove enable_dma() hook
  mmc: sdhci: Set DMA mask when adding host
  mmc: block: fix ABI regression of mmc_blk_ioctl
  mmc: atmel-mci: Check pdata for NULL before dereferencing it at DMA config
  mmc: core: remove redundant memset of sdio_read_cccr
  mmc: core: remove redundant memset of mmc_decode_cid
  mmc: of_mmc_spi: fix unused warning
  mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan
  mmc: sdhci-of-arasan: fix missing sdhci_pltfm_free for err handling
  mmc: sdhci-of-arasan: remove disable clk_ahb from sdhci_arasan_resume
  Documentation: bindings: add description of phy for sdhci-of-arasan
  mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout
  mmc: mmci: Remove unnecessary header file
  mmc: sdhci-acpi: add QCOM controllers
  mmc: tegra: implement memcomp pad calibration
  mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch
  mmc: mediatek: Change signal voltage error to dev_dbg()
  mmc: sh_mmcif, tmio: Use ARCH_RENESAS
  ...

Pull MD updates from Shaohua Li:
 "This update mainly fixes bugs.

   - a raid5 discard related fix from Jes
   - a MD multipath bio clone fix from Ming
   - raid1 error handling deadlock fix from Nate and corresponding
     raid10 fix from myself
   - a raid5 stripe batch fix from Neil
   - a patch from Sebastian to avoid unnecessary uevent
   - several cleanup/debug patches"

* tag 'md/4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid5: Cleanup cpu hotplug notifier
  raid10: include bio_end_io_list in nr_queued to prevent freeze_array hang
  raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang
  md: fix typos for stipe
  md/bitmap: remove redundant return in bitmap_checkpage
  md/raid1: remove unnecessary BUG_ON
  md: multipath: don't hardcopy bio in .make_request path
  md/raid5: output stripe state for debug
  md/raid5: preserve STRIPE_PREREAD_ACTIVE in break_stripe_batch_list
  Update MD git tree URL
  md/bitmap: remove redundant check
  MD: warn for potential deadlock
  md: Drop sending a change uevent when stopping
  RAID5: revert e9e4c377 to fix a livelock
  RAID5: check_reshape() shouldn't call mddev_suspend
  md/raid5: Compare apples to apples (or sectors to sectors)

I noticed this while merging the drm tree and checking for stragglers:
the vsp1 driver still used dma_[alloc|free]_writecombine() that got
renamed in commit f6e45661 ("dma, mm/pat: Rename
dma_*_writecombine() to dma_*_wc()")

I should have noticed back in the media merge (commit bace3db5), but
better late than never.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.6 kernel.

  Overall the coolest thing here for me is the nouveau maxwell signed
  firmware support from NVidia, it's taken a long while to extract this
  from them.

  I also wish the ARM vendors just designed one set of display IP, ARM
  display block proliferation is definitely increasing.

  Core:
     - drm_event cleanups
     - Internal API cleanup making mode_fixup optional.
     - Apple GMUX vga switcheroo support.
     - DP AUX testing interface

  Panel:
     - Refactoring of DSI core for use over more transports.

  New driver:
     - ARM hdlcd driver

  i915:
     - FBC/PSR (framebuffer compression, panel self refresh) enabled by default.
     - Ongoing atomic display support work
     - Ongoing runtime PM work
     - Pixel clock limit checks
     - VBT DSI description support
     - GEM fixes
     - GuC firmware scheduler enhancements

  amdkfd:
     - Deferred probing fixes to avoid make file or link ordering.

  amdgpu/radeon:
     - ACP support for i2s audio support.
     - Command Submission/GPU scheduler/GPUVM optimisations
     - Initial GPU reset support for amdgpu

  vmwgfx:
     - Support for DX10 gen mipmaps
     - Pageflipping and other fixes.

  exynos:
     - Exynos5420 SoC support for FIMD
     - Exynos5422 SoC support for MIPI-DSI

  nouveau:
     - GM20x secure boot support - adds acceleration for Maxwell GPUs.
     - GM200 support
     - GM20B clock driver support
     - Power sensors work

  etnaviv:
     - Correctness fixes for GPU cache flushing
     - Better support for i.MX6 systems.

  imx-drm:
     - VBlank IRQ support
     - Fence support
     - OF endpoint support

  msm:
     - HDMI support for 8996 (snapdragon 820)
     - Adreno 430 support
     - Timestamp queries support

  virtio-gpu:
     - Fixes for Android support.

  rockchip:
     - Add support for Innosilicion HDMI

  rcar-du:
     - Support for 4 crtcs
     - R8A7795 support
     - RCar Gen 3 support

  omapdrm:
     - HDMI interlace output support
     - dma-buf import support
     - Refactoring to remove a lot of legacy code.

  tilcdc:
     - Rewrite of pageflipping code
     - dma-buf support
     - pinctrl support

  vc4:
     - HDMI modesetting bug fixes
     - Significant 3D performance improvement.

  fsl-dcu (FreeScale):
     - Lots of fixes

  tegra:
     - Two small fixes

  sti:
     - Atomic support for planes
     - Improved HDMI support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits)
  drm/amdgpu: release_pages requires linux/pagemap.h
  drm/sti: restore mode_fixup callback
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  ...

Pull arm[64] perf updates from Will Deacon:
 "I have another mixed bag of ARM-related perf patches here.

  It's about 25% CPU and 75% interconnect, but with drivers/bus/
  languishing without an obvious maintainer or tree, Olof and I agreed
  to keep all of these PMU patches together.  I suspect a whole load of
  code from drivers/bus/arm-* can be moved under drivers/perf/, so
  that's on the radar for the future.

  Summary:

   - Initial support for ARMv8.1 CPU PMUs

   - Support for the CPU PMU in Cavium ThunderX

   - CPU PMU support for systems running 32-bit Linux in secure mode

   - Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)"

* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (26 commits)
  drivers/perf: arm_pmu: avoid NULL dereference when not using devicetree
  arm64: perf: Extend ARMV8_EVTYPE_MASK to include PMCR.LC
  arm-cci: remove unused variable
  arm-cci: don't return value from void function
  arm-cci: make private functions static
  arm-cci: CoreLink CCI-550 PMU driver
  arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMU
  arm-cci: CCI-500: Work around PMU counter writes
  arm-cci: Provide hook for writing to PMU counters
  arm-cci: Add helper to enable PMU without synchornising counters
  arm-cci: Add routines to save/restore all counters
  arm-cci: Get the status of a counter
  arm-cci: write_counter: Remove redundant check
  arm-cci: Delay PMU counter writes to pmu::pmu_enable
  arm-cci: Refactor CCI PMU enable/disable methods
  arm-cci: Group writes to counter
  arm-cci: fix handling cpumask_any_but return value
  arm-cci: simplify sysfs attr handling
  drivers/perf: arm_pmu: implement CPU_PM notifier
  arm64: dts: Add Cavium ThunderX specific PMU
  ...

Pull ARC architecture updates from Vineet Gupta:
 - Big Endian io accessors fix [Lada]
 - Spellos fixes [Adam]
 - Fix for DW GMAC breakage [Alexey]
 - Making DMA API 64-bit ready
 - Shutting up -Wmaybe-uninitialized noise for ARC
 - Other minor fixes here and there, comments update

* tag 'arc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (21 commits)
  ARCv2: ioremap: Support dynamic peripheral address space
  ARC: dma: reintroduce platform specific dma<->phys
  ARC: dma: ioremap: use phys_addr_t consistenctly in code paths
  ARC: dma: pass_phys() not sg_virt() to cache ops
  ARC: dma: non-coherent pages need V-P mapping if in HIGHMEM
  ARC: dma: Use struct page based page allocator helpers
  ARC: build: Turn off -Wmaybe-uninitialized for ARC gcc 4.8
  ARC: [plat-axs10x] add Ethernet PHY description in .dts
  arc: use of_platform_default_populate() to populate default bus
  ARC: thp: unbork !CONFIG_TRANSPARENT_HUGEPAGE build
  arc: [plat-nsimosci*] use ezchip network driver
  ARCv2: LLSC: software backoff is NOT needed starting HS2.1c
  ARC: mm: Use virt_to_pfn() for addr >> PAGE_SHIFT pattern
  ARC: [plat-nsim] document ranges
  ARC: build: Better way to detect ISA compatible toolchain
  ARCv2: Allow enabling PAE40 w/o HIGHMEM
  ARC: [BE] readl()/writel() to work in Big Endian CPU configuration
  ARC: [*defconfig] No need to specify CONFIG_CROSS_COMPILE
  ARC: [BE] Select correct CROSS_COMPILE prefix
  ARC: bitops: Remove non relevant comments
  ...

Pull UDF and quota updates from Jan Kara:
 "This contains a rewrite of UDF handling of filename encoding to fix
  remaining overflow issues from Andrew Gabbasov and quota changes to
  support new Q_[X]GETNEXTQUOTA quotactl for VFS quota formats"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Fix possible GPF due to uninitialised pointers
  ext4: Make Q_GETNEXTQUOTA work for quota in hidden inodes
  quota: Forbid Q_GETQUOTA and Q_GETNEXTQUOTA for frozen filesystem
  quota: Fix possible races during quota loading
  ocfs2: Implement get_next_id()
  quota_v2: Implement get_next_id() for V2 quota format
  quota: Add support for ->get_nextdqblk() for VFS quota
  udf: Merge linux specific translation into CS0 conversion function
  udf: Remove struct ustr as non-needed intermediate storage
  udf: Use separate buffer for copying split names
  udf: Adjust UDF_NAME_LEN to better reflect actual restrictions
  udf: Join functions for UTF8 and NLS conversions
  udf: Parameterize output length in udf_put_filename
  quota: Allow Q_GETQUOTA for frozen filesystem
  quota: Fixup comments about return value of Q_[X]GETNEXTQUOTA

Pull xfs updates from Dave Chinner:
 "There's quite a lot in this request, and there's some cross-over with
  ext4, dax and quota code due to the nature of the changes being made.

  As for the rest of the XFS changes, there are lots of little things
  all over the place, which add up to a lot of changes in the end.

  The major changes are that we've reduced the size of the struct
  xfs_inode by ~100 bytes (gives an inode cache footprint reduction of
  >10%), the writepage code now only does a single set of mapping tree
  lockups so uses less CPU, delayed allocation reservations won't
  overrun under random write loads anymore, and we added compile time
  verification for on-disk structure sizes so we find out when a commit
  or platform/compiler change breaks the on disk structure as early as
  possible.

  Change summary:

   - error propagation for direct IO failures fixes for both XFS and
     ext4
   - new quota interfaces and XFS implementation for iterating all the
     quota IDs in the filesystem
   - locking fixes for real-time device extent allocation
   - reduction of duplicate information in the xfs and vfs inode, saving
     roughly 100 bytes of memory per cached inode.
   - buffer flag cleanup
   - rework of the writepage code to use the generic write clustering
     mechanisms
   - several fixes for inode flag based DAX enablement
   - rework of remount option parsing
   - compile time verification of on-disk format structure sizes
   - delayed allocation reservation overrun fixes
   - lots of little error handling fixes
   - small memory leak fixes
   - enable xfsaild freezing again"

* tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits)
  xfs: always set rvalp in xfs_dir2_node_trim_free
  xfs: ensure committed is initialized in xfs_trans_roll
  xfs: borrow indirect blocks from freed extent when available
  xfs: refactor delalloc indlen reservation split into helper
  xfs: update freeblocks counter after extent deletion
  xfs: debug mode forced buffered write failure
  xfs: remove impossible condition
  xfs: check sizes of XFS on-disk structures at compile time
  xfs: ioends require logically contiguous file offsets
  xfs: use named array initializers for log item dumping
  xfs: fix computation of inode btree maxlevels
  xfs: reinitialise per-AG structures if geometry changes during recovery
  xfs: remove xfs_trans_get_block_res
  xfs: fix up inode32/64 (re)mount handling
  xfs: fix format specifier , should be %llx and not %llu
  xfs: sanitize remount options
  xfs: convert mount option parsing to tokens
  xfs: fix two memory leaks in xfs_attr_list.c error paths
  xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE
  xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared
  ...

Pull f2fs updates from Jaegeuk Kim:
 "New Features:
   - uplift filesystem encryption into fs/crypto/
   - give sysfs entries to control memroy consumption

  Enhancements:
   - aio performance by preallocating blocks in ->write_iter
   - use writepages lock for only WB_SYNC_ALL
   - avoid redundant inline_data conversion
   - enhance forground GC
   - use wait_for_stable_page as possible
   - speed up SEEK_DATA and fiiemap

  Bug Fixes:
   - corner case in terms of -ENOSPC for inline_data
   - hung task caused by long latency in shrinker
   - corruption between atomic write and f2fs_trace_pid
   - avoid garbage lengths in dentries
   - revoke atomicly written pages if an error occurs

  In addition, there are various minor bug fixes and clean-ups"

* tag 'for-f2fs-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
  f2fs: submit node page write bios when really required
  f2fs: add missing argument to f2fs_setxattr stub
  f2fs: fix to avoid unneeded unlock_new_inode
  f2fs: clean up opened code with f2fs_update_dentry
  f2fs: declare static functions
  f2fs: use cryptoapi crc32 functions
  f2fs: modify the readahead method in ra_node_page()
  f2fs crypto: sync ext4_lookup and ext4_file_open
  fs crypto: move per-file encryption from f2fs tree to fs/crypto
  f2fs: mutex can't be used by down_write_nest_lock()
  f2fs: recovery missing dot dentries in root directory
  f2fs: fix to avoid deadlock when merging inline data
  f2fs: introduce f2fs_flush_merged_bios for cleanup
  f2fs: introduce f2fs_update_data_blkaddr for cleanup
  f2fs crypto: fix incorrect positioning for GCing encrypted data page
  f2fs: fix incorrect upper bound when iterating inode mapping tree
  f2fs: avoid hungtask problem caused by losing wake_up
  f2fs: trace old block address for CoWed page
  f2fs: try to flush inode after merging inline data
  f2fs: show more info about superblock recovery
  ...

Pull cgroup namespace support from Tejun Heo:
 "These are changes to implement namespace support for cgroup which has
  been pending for quite some time now.  It is very straight-forward and
  only affects what part of cgroup hierarchies are visible.

  After unsharing, mounting a cgroup fs will be scoped to the cgroups
  the task belonged to at the time of unsharing and the cgroup paths
  exposed to userland would be adjusted accordingly"

* 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix and restructure error handling in copy_cgroup_ns()
  cgroup: fix alloc_cgroup_ns() error handling in copy_cgroup_ns()
  Add FS_USERNS_FLAG to cgroup fs
  cgroup: Add documentation for cgroup namespaces
  cgroup: mount cgroupns-root when inside non-init cgroupns
  kernfs: define kernfs_node_dentry
  cgroup: cgroup namespace setns support
  cgroup: introduce cgroup namespaces
  sched: new clone flag CLONE_NEWCGROUP for cgroup namespace
  kernfs: Add API to generate relative kernfs path

Commit c40a3d38 (Btrfs: Compute and look up csums based on
sectorsized blocks) changes around how we walk the bios while looking up
crcs.  There's an inner loop that is jumping to the next bvec based on
sectors and before it derefs the next bvec, it needs to make sure we're
still in the bio.

In this case, the outer loop would have decided to stop moving forward
too, and the bvec deref is never actually used for anything.  But
CONFIG_DEBUG_PAGEALLOC catches it because we're outside our bio.
Signed-off-by: NChris Mason <clm@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>