- 29 9月, 2017 6 次提交
-
-
由 Peter Zijlstra 提交于
Currently TASK_PARKED is masqueraded as TASK_INTERRUPTIBLE, give it its own print state because it will not in fact get woken by regular wakeups and is a long-term state. This requires moving TASK_PARKED into the TASK_REPORT mask, and since that latter needs to be a contiguous bitmask, we need to shuffle the bits around a bit. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Markus reported that kthreads that idle using TASK_IDLE instead of TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things like htop mark those red. This is undesirable, so add an explicit state for TASK_IDLE. Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Remove yet another task-state char instance. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Convert trace_sched_switch to use the common task-state helpers and fix the "X" and "Z" order, possibly they ended up in the wrong order because TASK_REPORT has them in the wrong order too. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Bit patterns are easier in hex. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Currently get_task_state() and task_state_to_char() report different states, create a number of common helpers and unify the reported state space. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 9月, 2017 1 次提交
-
-
由 Kees Cook 提交于
Modern kernel callback systems pass the structure associated with a given callback to the callback function. The timer callback remains one of the legacy cases where an arbitrary unsigned long argument continues to be passed as the callback argument. This has several problems: - This bloats the timer_list structure with a normally redundant .data field. - No type checking is being performed, forcing callbacks to do explicit type casts of the unsigned long argument into the object that was passed, rather than using container_of(), as done in most of the other callback infrastructure. - Neighboring buffer overflows can overwrite both the .function and the .data field, providing attackers with a way to elevate from a buffer overflow into a simplistic ROP-like mechanism that allows calling arbitrary functions with a controlled first argument. - For future Control Flow Integrity work, this creates a unique function prototype for timer callbacks, instead of allowing them to continue to be clustered with other void functions that take a single unsigned long argument. This adds a new timer initialization API, which will ultimately replace the existing setup_timer(), setup_{deferrable,pinned,etc}_timer() family, named timer_setup() (to mirror hrtimer_setup(), making instances of its use much easier to grep for). In order to support the migration of existing timers into the new callback arguments, timer_setup() casts its arguments to the existing legacy types, and explicitly passes the timer pointer as the legacy data argument. Once all setup_*timer() callers have been replaced with timer_setup(), the casts can be removed, and the data argument can be dropped with the timer expiration code changed to just pass the timer to the callback directly. Since the regular pattern of using container_of() during local variable declaration repeats the need for the variable type declaration to be included, this adds a helper modeled after other from_*() helpers that wrap container_of(), named from_timer(). This helper uses typeof(*variable), removing the type redundancy and minimizing the need for line wraps in forthcoming conversions from "unsigned data long" to "struct timer_list *" in the timer callbacks: -void callback(unsigned long data) +void callback(struct timer_list *t) { - struct some_data_structure *local = (struct some_data_structure *)data; + struct some_data_structure *local = from_timer(local, t, timer); Finally, in order to support the handful of timer users that perform open-coded assignments of the .function (and .data) fields, provide cast macros (TIMER_FUNC_TYPE and TIMER_DATA_TYPE) that can be used temporarily. Once conversion has been completed, these can be globally trivially removed. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20170928133817.GA113410@beast
-
- 27 9月, 2017 1 次提交
-
-
由 Jean-Philippe Brucker 提交于
The definition of map_sg was split during a recent addition to iommu_ops. Put it back together. Fixes: add02cfd ("iommu: Introduce Interface for IOMMU TLB Flushing") Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 26 9月, 2017 4 次提交
-
-
由 Peter Zijlstra 提交于
Add a sysfs file to one-time fail a specific state. This can be used to test the state rollback code paths. Something like this (hotplug-up.sh): #!/bin/bash echo 0 > /debug/sched_debug echo 1 > /debug/tracing/events/cpuhp/enable ALL_STATES=`cat /sys/devices/system/cpu/hotplug/states | cut -d':' -f1` STATES=${1:-$ALL_STATES} for state in $STATES do echo 0 > /sys/devices/system/cpu/cpu1/online echo 0 > /debug/tracing/trace echo Fail state: $state echo $state > /sys/devices/system/cpu/cpu1/hotplug/fail cat /sys/devices/system/cpu/cpu1/hotplug/fail echo 1 > /sys/devices/system/cpu/cpu1/online cat /debug/tracing/trace > hotfail-${state}.trace sleep 1 done Can be used to test for all possible rollback (barring multi-instance) scenarios on CPU-up, CPU-down is a trivial modification of the above. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Cc: max.byungchul.park@gmail.com Link: https://lkml.kernel.org/r/20170920170546.972581715@infradead.org
-
由 Peter Zijlstra 提交于
Add a state diagram to clarify when which states are ran where. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Cc: max.byungchul.park@gmail.com Link: https://lkml.kernel.org/r/20170920170546.661598270@infradead.org
-
由 James Smart 提交于
Comments were incorrect: - defer_rcv was in host port template. moved to target port template - Added Mandatory statements for target port template items Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Geert Uytterhoeven 提交于
If CONFIG_PCI=n and gcc (e.g. 4.1.2) decides not to inline get_pci_function_alias_group(), the build fails with: drivers/iommu/iommu.o: In function `get_pci_function_alias_group': iommu.c:(.text+0xfdc): undefined reference to `pci_acs_enabled' Due to the various dummies for PCI calls in the CONFIG_PCI=n case, pci_acs_enabled() never called, but not all versions of gcc are smart enough to realize that. While explicitly marking get_pci_function_alias_group() inline would fix the build, this would inflate the code for the CONFIG_PCI=y case, as get_pci_function_alias_group() is a not-so-small function called from two places. Hence fix the issue by introducing a dummy for pci_acs_enabled() instead. Fixes: 0ae349a0 ("iommu/qcom: Add qcom_iommu") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Reviewed-by: NAlex Williamson <alex.williamson@redhat.com>
-
- 25 9月, 2017 4 次提交
-
-
由 James Smart 提交于
Add transport SGL defintions from NVMe TP 4008, required for the final NVMe-FC standard. Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 James Smart 提交于
The NVM express group recinded the reserved range for the transport. Remove the FC-centric values that had been defined. Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Waiman Long 提交于
The lockdep code had reported the following unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#228); lock(&bdev->bd_mutex/1); lock(s_active#228); lock(&bdev->bd_mutex); *** DEADLOCK *** The deadlock may happen when one task (CPU1) is trying to delete a partition in a block device and another task (CPU0) is accessing tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that partition. The s_active isn't an actual lock. It is a reference count (kn->count) on the sysfs (kernfs) file. Removal of a sysfs file, however, require a wait until all the references are gone. The reference count is treated like a rwsem using lockdep instrumentation code. The fact that a thread is in the sysfs callback method or in the ioctl call means there is a reference to the opended sysfs or device file. That should prevent the underlying block structure from being removed. Instead of using bd_mutex in the block_device structure, a new blk_trace_mutex is now added to the request_queue structure to protect access to the blk_trace structure. Suggested-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NWaiman Long <longman@redhat.com> Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Fix typo in patch subject line, and prune a comment detailing how the code used to work. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Eric Biggers 提交于
It was possible for an unprivileged user to create the user and user session keyrings for another user. For example: sudo -u '#3000' sh -c 'keyctl add keyring _uid.4000 "" @u keyctl add keyring _uid_ses.4000 "" @u sleep 15' & sleep 1 sudo -u '#4000' keyctl describe @u sudo -u '#4000' keyctl describe @us This is problematic because these "fake" keyrings won't have the right permissions. In particular, the user who created them first will own them and will have full access to them via the possessor permissions, which can be used to compromise the security of a user's keys: -4: alswrv-----v------------ 3000 0 keyring: _uid.4000 -5: alswrv-----v------------ 3000 0 keyring: _uid_ses.4000 Fix it by marking user and user session keyrings with a flag KEY_FLAG_UID_KEYRING. Then, when searching for a user or user session keyring by name, skip all keyrings that don't have the flag set. Fixes: 69664cf1 ("keys: don't generate user and user session keyrings unless they're accessed") Cc: <stable@vger.kernel.org> [v2.6.26+] Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 22 9月, 2017 1 次提交
-
-
由 Dmitry Torokhov 提交于
Normally, when input device supporting force feedback effects is being destroyed, we try to "flush" currently playing effects, so that the physical device does not continue vibrating (or executing other effects). Unfortunately this does not work well for uinput as flushing of the effects deadlocks with the destroy action: - if device is being destroyed because the file descriptor is being closed, then there is noone to even service FF requests; - if device is being destroyed because userspace sent UI_DEV_DESTROY, while theoretically it could be possible to service FF requests, userspace is unlikely to do so (they'd need to make sure FF handling happens on a separate thread) even if kernel solves the issue with FF ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex. To avoid lockups like the one below, let's install a custom input device flush handler, and avoid trying to flush force feedback effects when we destroying the device, and instead rely on uinput to shut off the device properly. NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 ... <<EOE>> [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40 [<ffffffff810e633d>] complete+0x1d/0x50 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput] [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput] [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput] [<ffffffff815d91ad>] erase_effect+0xad/0xf0 [<ffffffff815d929d>] flush_effects+0x4d/0x90 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput] [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput] [<ffffffff811231ab>] ? do_futex+0x12b/0xad0 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Reported-by: NRodrigo Rivas Costa <rodrigorivascosta@gmail.com> Reported-by: NClément VUCHENER <clement.vuchener@gmail.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 21 9月, 2017 2 次提交
-
-
由 Thomas Gleixner 提交于
This reverts commit 74def747. The change to the helper function is only correct for the /proc/irq/ readout usage, but breaks the existing x86 usage of that function. Reported-by: NYanko Kaneti <yaneti@declera.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com>
-
由 Yonghong Song 提交于
This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 <this will be successful> 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2017 1 次提交
-
-
由 Arnd Bergmann 提交于
The ipmmu-vmsa driver fails in compile-testing on non-OF platforms: drivers/iommu/ipmmu-vmsa.o: In function `ipmmu_of_xlate': ipmmu-vmsa.c:(.text+0x740): undefined reference to `of_find_device_by_node' It would be reasonable to assume that this interface works but returns failure on non-OF builds, like it does on machines that have been booted in another way, so this adds another inline function helper. Fixes: 7b2d5961 ("iommu/ipmmu-vmsa: Replace local utlb code with fwspec ids") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 18 9月, 2017 2 次提交
-
-
由 Geert Uytterhoeven 提交于
Correct location as of commit 2728b2d2 (PM / core / docs: Convert sleep states API document to reST). Fixes: 2728b2d2 (PM / core / docs: Convert sleep states API document to reST) Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Thomas Garnier 提交于
Use CHECK_DATA_CORRUPTION instead of BUG_ON to provide more flexibility on address limit failures. By default, send a SIGKILL signal to kill the current process preventing exploitation of a bad address limit. Make the TIF_FSCHECK flag optional so ARM can use this function. Signed-off-by: NThomas Garnier <thgarnie@google.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Pratyush Anand <panand@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Drewry <wad@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Yonghong Song <yhs@fb.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1504798247-48833-2-git-send-email-keescook@chromium.org
-
- 15 9月, 2017 4 次提交
-
-
由 Davidlohr Bueso 提交于
Which is the equivalent of what we have in regular waitqueues. I'm not crazy about the name, but this also helps us get both apis closer -- which iirc comes originally from the -net folks. We also duplicate the comments for the lockless swait_active(), from wait.h. Future users will make use of this interface. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Mimi Zohar 提交于
This patch constifies the path argument to kernel_read_file_from_path(). Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tim Chen 提交于
Now that we have added breaks in the wait queue scan and allow bookmark on scan position, we put this logic in the wake_up_page_bit function. We can have very long page wait list in large system where multiple pages share the same wait list. We break the wake up walk here to allow other cpus a chance to access the list, and not to disable the interrupts when traversing the list for too long. This reduces the interrupt and rescheduling latency, and excessive page wait queue lock hold time. [ v2: Remove bookmark_wake_function ] Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tim Chen 提交于
We encountered workloads that have very long wake up list on large systems. A waker takes a long time to traverse the entire wake list and execute all the wake functions. We saw page wait list that are up to 3700+ entries long in tests of large 4 and 8 socket systems. It took 0.8 sec to traverse such list during wake up. Any other CPU that contends for the list spin lock will spin for a long time. It is a result of the numa balancing migration of hot pages that are shared by many threads. Multiple CPUs waking are queued up behind the lock, and the last one queued has to wait until all CPUs did all the wakeups. The page wait list is traversed with interrupt disabled, which caused various problems. This was the original cause that triggered the NMI watch dog timer in: https://patchwork.kernel.org/patch/9800303/ . Only extending the NMI watch dog timer there helped. This patch bookmarks the waker's scan position in wake list and break the wake up walk, to allow access to the list before the waker resume its walk down the rest of the wait list. It lowers the interrupt and rescheduling latency. This patch also provides a performance boost when combined with the next patch to break up page wakeup list walk. We saw 22% improvement in the will-it-scale file pread2 test on a Xeon Phi system running 256 threads. [ v2: Merged in Linus' changes to remove the bookmark_wake_function, and simply access to flags. ] Reported-by: NKan Liang <kan.liang@intel.com> Tested-by: NKan Liang <kan.liang@intel.com> Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 9月, 2017 1 次提交
-
-
由 Michal Hocko 提交于
GFP_TEMPORARY was introduced by commit e12ba74d ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NMel Gorman <mgorman@suse.de> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 9月, 2017 3 次提交
-
-
由 Yonghong Song 提交于
clang does not support variable length array for structure member. It has the following error during compilation: kernel/trace/trace_syscalls.c:568:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported unsigned long args[sys_data->nb_args]; ^ The fix is to use a fixed array length instead. Reported-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Wilck 提交于
The way I'd implemented the new helper memcpy_and_pad with __FORTIFY_INLINE caused compiler warnings for certain kernel configurations. This helper is only used in a single place at this time, and thus doesn't benefit much from fortification. So simplify the code by dropping fortification support for now. Fixes: 01f33c33 "string.h: add memcpy_and_pad()" Signed-off-by: NMartin Wilck <mwilck@suse.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Adds support for the new Host Memory Buffer Minimum Descriptor Entry Size and Host Memory Maximum Descriptors Entries field that were added in TP 4002 HMB Enhancements. These allow the controller to advertise limits for the usual number of segments in the host memory buffer, as well as a minimum usable per-segment size. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com>
-
- 11 9月, 2017 1 次提交
-
-
由 Mikulas Patocka 提交于
Commit abebfbe2 ("dm: add ->flush() dax operation support") is buggy. A DM device may be composed of multiple underlying devices and all of them need to be flushed. That commit just routes the flush request to the first device and ignores the other devices. It could be fixed by adding more complex logic to the device mapper. But there is only one implementation of the method pmem_dax_ops->flush - that is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we don't need the pmem_dax_ops->flush abstraction at all, we can call arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush can't ever reach anything different from arch_wb_cache_pmem(). It should be also pointed out that for some uses of persistent memory it is needed to flush only a very small amount of data (such as 1 cacheline), and it would be overkill if we go through that device mapper machinery for a single flushed cache line. Fix this by removing the pmem_dax_ops->flush abstraction and call arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device mapper code that forwards the flushes. Fixes: abebfbe2 ("dm: add ->flush() dax operation support") Cc: stable@vger.kernel.org Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Reviewed-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
- 09 9月, 2017 9 次提交
-
-
由 John Fastabend 提交于
The bpf map sockmap supports adding programs via attach commands. This patch adds the detach command to keep the API symmetric and allow users to remove previously added programs. Otherwise the user would have to delete the map and re-add it to get in this state. This also adds a series of additional tests to capture detach operation and also attaching/detaching invalid prog types. API note: socks will run (or not run) programs depending on the state of the map at the time the sock is added. We do not for example walk the map and remove programs from previously attached socks. Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Knispel 提交于
ipc_findkey() used to scan all objects to look for the wanted key. This is slow when using a high number of keys. This change adds an rhashtable of kern_ipc_perm objects in ipc_ids, so that one lookup cease to be O(n). This change gives a 865% improvement of benchmark reaim.jobs_per_min on a 56 threads Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz with 256G memory [1] Other (more micro) benchmark results, by the author: On an i5 laptop, the following loop executed right after a reboot took, without and with this change: for (int i = 0, k=0x424242; i < KEYS; ++i) semget(k++, 1, IPC_CREAT | 0600); total total max single max single KEYS without with call without call with 1 3.5 4.9 µs 3.5 4.9 10 7.6 8.6 µs 3.7 4.7 32 16.2 15.9 µs 4.3 5.3 100 72.9 41.8 µs 3.7 4.7 1000 5,630.0 502.0 µs * * 10000 1,340,000.0 7,240.0 µs * * 31900 17,600,000.0 22,200.0 µs * * *: unreliable measure: high variance The duration for a lookup-only usage was obtained by the same loop once the keys are present: total total max single max single KEYS without with call without call with 1 2.1 2.5 µs 2.1 2.5 10 4.5 4.8 µs 2.2 2.3 32 13.0 10.8 µs 2.3 2.8 100 82.9 25.1 µs * 2.3 1000 5,780.0 217.0 µs * * 10000 1,470,000.0 2,520.0 µs * * 31900 17,400,000.0 7,810.0 µs * * Finally, executing each semget() in a new process gave, when still summing only the durations of these syscalls: creation: total total KEYS without with 1 3.7 5.0 µs 10 32.9 36.7 µs 32 125.0 109.0 µs 100 523.0 353.0 µs 1000 20,300.0 3,280.0 µs 10000 2,470,000.0 46,700.0 µs 31900 27,800,000.0 219,000.0 µs lookup-only: total total KEYS without with 1 2.5 2.7 µs 10 25.4 24.4 µs 32 106.0 72.6 µs 100 591.0 352.0 µs 1000 22,400.0 2,250.0 µs 10000 2,510,000.0 25,700.0 µs 31900 28,200,000.0 115,000.0 µs [1] http://lkml.kernel.org/r/20170814060507.GE23258@yexl-desktop Link: http://lkml.kernel.org/r/20170815194954.ck32ta2z35yuzpwp@debixSigned-off-by: NGuillaume Knispel <guillaume.knispel@supersonicimagine.com> Reviewed-by: NMarc Pardo <marc.pardo@supersonicimagine.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Serge Hallyn <serge@hallyn.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Guillaume Knispel <guillaume.knispel@supersonicimagine.com> Cc: Marc Pardo <marc.pardo@supersonicimagine.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Elena Reshetova 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Link: http://lkml.kernel.org/r/1499417992-3238-4-git-send-email-elena.reshetova@intel.comSigned-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: <arozansk@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Elena Reshetova 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Link: http://lkml.kernel.org/r/1499417992-3238-2-git-send-email-elena.reshetova@intel.comSigned-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: <arozansk@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Collection of aesthetic adjustments to various PPS-related files, directories and Documentation, some quite minor just for the sake of consistency, including: * Updated example of pps device tree node (courtesy Rodolfo G.) * "PPS-API" -> "PPS API" * "pps_source_info_s" -> "pps_source_info" * "ktimer driver" -> "pps-ktimer driver" * "ppstest /dev/pps0" -> "ppstest /dev/pps1" to match example * Add missing PPS-related entries to MAINTAINERS file * Other trivialities Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261048220.8106@localhost.localdomainSigned-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Acked-by: NRodolfo Giometti <giometti@enneenne.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Every for_each_XXX_cpu() invocation calls cpumask_next() which is an inline function: static inline unsigned int cpumask_next(int n, const struct cpumask *srcp) { /* -1 is a legal arg here. */ if (n != -1) cpumask_check(n); return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n + 1); } However! find_next_bit() is regular out-of-line function which means "nr_cpu_ids" load and increment happen at the caller resulting in a lot of bloat x86_64 defconfig: add/remove: 3/0 grow/shrink: 8/373 up/down: 155/-5668 (-5513) x86_64 allyesconfig-ish: add/remove: 3/1 grow/shrink: 57/634 up/down: 3515/-28177 (-24662) !!! Some archs redefine find_next_bit() but it is OK: m68k inline but SMP is not supported arm out-of-line unicore32 out-of-line Function call will happen anyway, so move load and increment into callee. Link: http://lkml.kernel.org/r/20170824230010.GA1593@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis R. Rodriguez 提交于
In the future usermode helper users do not need to carry in all the of kmod headers declarations. Since kmod.h still includes umh.h this change has no functional changes, each umh user can be cleaned up separately later and with time. Link: http://lkml.kernel.org/r/20170810180618.22457-4-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ian Kent 提交于
The fstatat(2) and statx() calls can pass the flag AT_NO_AUTOMOUNT which is meant to clear the LOOKUP_AUTOMOUNT flag and prevent triggering of an automount by the call. But this flag is unconditionally cleared for all stat family system calls except statx(). stat family system calls have always triggered mount requests for the negative dentry case in follow_automount() which is intended but prevents the fstatat(2) and statx() AT_NO_AUTOMOUNT case from being handled. In order to handle the AT_NO_AUTOMOUNT for both system calls the negative dentry case in follow_automount() needs to be changed to return ENOENT when the LOOKUP_AUTOMOUNT flag is clear (and the other required flags are clear). AFAICT this change doesn't have any noticable side effects and may, in some use cases (although I didn't see it in testing) prevent unnecessary callbacks to the automount daemon. It's also possible that a stat family call has been made with a path that is in the process of being mounted by some other process. But stat family calls should return the automount state of the path as it is "now" so it shouldn't wait for mount completion. This is the same semantic as the positive dentry case already handled. Link: http://lkml.kernel.org/r/150216641255.11652.4204561328197919771.stgit@pluto.themaw.net Fixes: deccf497 ("Make stat/lstat/fstatat pass AT_NO_AUTOMOUNT to vfs_statx()") Signed-off-by: NIan Kent <raven@themaw.net> Cc: David Howells <dhowells@redhat.com> Cc: Colin Walters <walters@redhat.com> Cc: Ondrej Holy <oholy@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
As of commit 4cf0b354 ("rhashtable: avoid large lock-array allocations"), the default value for the locks multiplier was reduced from 128 to 32. Update the header file to reflect this. Link: http://lkml.kernel.org/r/20170815215401.30745-1-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-