Using spin_lock_irq()/spin_unlock_irq() from within the interrupt
handler is a no-no. Let's save/restore the flags to avoid turning on
interrupts prematurely.

We hit this in a bunch of our CI systems, but for whatever reason I
wasn't able to reproduce on my own machine, so this fix is just
based on the backtrace.

[  202.634918] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2729 trace_hardirqs_on_caller+0x113/0x1b0
[  202.634919] DEBUG_LOCKS_WARN_ON(current->hardirq_context)
[  202.634929] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_codec snd_hwdep i2c_designware_platform i2c_designware_core snd_hda_core mei_me mei snd_pcm r8169 mii sdhci_acpi sdhci mmc_core i2c_hid [last unloaded: i915]
[  202.634930] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G     U          4.9.0-rc1-CI-CI_DRM_1734+ #1
[  202.634931] Hardware name: GIGABYTE M4HM87P-00/M4HM87P-00, BIOS F6 12/10/2014
[  202.634933]  ffff88011ea03d68 ffffffff8142dce5 ffff88011ea03db8 0000000000000000
[  202.634934]  ffff88011ea03da8 ffffffff8107e496 00000aa900000002 ffffffff81e249a0
[  202.634935]  ffffffff81815637 ffffffff82e7c280 0000000000000000 0000000000000004
[  202.634936] Call Trace:
[  202.634939]  <IRQ>
[  202.634939]  [<ffffffff8142dce5>] dump_stack+0x67/0x92
[  202.634941]  [<ffffffff8107e496>] __warn+0xc6/0xe0
[  202.634944]  [<ffffffff81815637>] ? _raw_spin_unlock_irq+0x27/0x50
[  202.634945]  [<ffffffff8107e4fa>] warn_slowpath_fmt+0x4a/0x50
[  202.634946]  [<ffffffff810d6d83>] trace_hardirqs_on_caller+0x113/0x1b0
[  202.634948]  [<ffffffff810d6e2d>] trace_hardirqs_on+0xd/0x10
[  202.634949]  [<ffffffff81815637>] _raw_spin_unlock_irq+0x27/0x50
[  202.634951]  [<ffffffff81672042>] rtc_handler+0x32/0xa0
[  202.634954]  [<ffffffff814c08a3>] acpi_ev_fixed_event_detect+0xd4/0xfb
[  202.634956]  [<ffffffff814c2ccb>] acpi_ev_sci_xrupt_handler+0xf/0x2d
[  202.634957]  [<ffffffff814ab3ee>] acpi_irq+0x11/0x2c
[  202.634960]  [<ffffffff810e5288>] __handle_irq_event_percpu+0x58/0x370
[  202.634961]  [<ffffffff810e55be>] handle_irq_event_percpu+0x1e/0x50
[  202.634962]  [<ffffffff810e5624>] handle_irq_event+0x34/0x60
[  202.634963]  [<ffffffff810e8906>] handle_fasteoi_irq+0xa6/0x170
[  202.634966]  [<ffffffff8101eef5>] handle_irq+0x15/0x20
[  202.634967]  [<ffffffff8101e548>] do_IRQ+0x68/0x130
[  202.634968]  [<ffffffff81816789>] common_interrupt+0x89/0x89
[  202.634970]  <EOI>
[  202.634970]  [<ffffffff81814c73>] ? mwait_idle+0x93/0x210
[  202.634971]  [<ffffffff81814c6a>] ? mwait_idle+0x8a/0x210
[  202.634972]  [<ffffffff81026b0a>] arch_cpu_idle+0xa/0x10
[  202.634973]  [<ffffffff8181509e>] default_idle_call+0x1e/0x30
[  202.634974]  [<ffffffff810cbf6c>] cpu_startup_entry+0x17c/0x1f0
[  202.634976]  [<ffffffff8180ca87>] rest_init+0x127/0x130
[  202.634978]  [<ffffffff81f77f08>] start_kernel+0x3f6/0x403
[  202.634980]  [<ffffffff81f7728f>] x86_64_start_reservations+0x2a/0x2c
[  202.634981]  [<ffffffff81f77404>] x86_64_start_kernel+0x173/0x186
[  202.634982] ---[ end trace 293c99618fa08d34 ]---

Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Fixes: 983bf125 ("rtc: cmos: Clear ACPI-driven alarms upon resume")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

I got the following stack trace under qemu:
[    7.575243] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[    7.596098] IP: [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280
[    7.615699] PGD 3ccbe067
[    7.615923] PUD 3daf2067
[    7.635156] PMD 0
[    7.654358] Oops: 0000 [#1] SMP
[    7.673869] Modules linked in:
[    7.693235] CPU: 0 PID: 1701 Comm: hwclock Tainted: G        W       4.9.0-rc1+ #24
[    7.712455] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
[    7.753569] task: ffff88003d88dc40 task.stack: ffffc90000224000
[    7.773743] RIP: 0010:[<ffffffff814f5b08>]  [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280
[    7.794893] RSP: 0018:ffffc90000227c10  EFLAGS: 00010296
[    7.815890] RAX: 000000000000001d RBX: ffffc90000227d28 RCX: ffffffff8182be78
[    7.836057] RDX: 0000000000000001 RSI: 0000000000000202 RDI: 0000000000000202
[    7.856612] RBP: ffffc90000227c48 R08: 0000000000000000 R09: 0000000000000001
[    7.877561] R10: 00000000000001c0 R11: 00000000000001c0 R12: 0000000000000000
[    7.897072] R13: ffff88003d96f400 R14: ffff88003dac6410 R15: ffff88003dac6420
[    7.917403] FS:  00007f77f42d9700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[    7.938293] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.958364] CR2: 0000000000000010 CR3: 000000003ccbb000 CR4: 00000000000006f0
[    7.978028] Stack:
[    7.997120]  ffff88003dac6000 ffff88003dac6410 0000000058049d01 ffffc90000227d28
[    8.016993]  ffff88003dac6000 ffff88003dac6410 ffff88003dac6420 ffffc90000227c98
[    8.039505]  ffffffff814f225d 0000001800227c98 000000090000002a 0000000900000011
[    8.059985] Call Trace:
[    8.080110]  [<ffffffff814f225d>] __rtc_set_alarm+0x8d/0xa0
[    8.099421]  [<ffffffff814f2389>] rtc_timer_enqueue+0x119/0x190
[    8.119925]  [<ffffffff814f2e6e>] rtc_update_irq_enable+0xbe/0x100
[    8.140583]  [<ffffffff814f3bb0>] rtc_dev_ioctl+0x3c0/0x480
[    8.161162]  [<ffffffff81146b6a>] ? user_path_at_empty+0x3a/0x50
[    8.182717]  [<ffffffff8114aa36>] do_vfs_ioctl+0x96/0x5c0
[    8.204624]  [<ffffffff8113e066>] ? vfs_stat+0x16/0x20
[    8.225994]  [<ffffffff8113e135>] ? SyS_newstat+0x15/0x30
[    8.247043]  [<ffffffff8114afa7>] SyS_ioctl+0x47/0x80
[    8.267191]  [<ffffffff815f5c77>] entry_SYSCALL_64_fastpath+0x1a/0xa9
[    8.288719] Code: 6a 81 48 89 e5 41 57 41 56 41 55 49 89 fd 41 54 53 48 89 f3 48 c7 c6 20 c4 78 81 48 83 ec 10 e8 8f 00 ef ff 4d 8b a5 a0 00 00 00 <41> 8b 44 24 10 85 c0 0f 8e 2b 02 00 00 4c 89 ef 31 c0 b9 53 01
[    8.335233] RIP  [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280
[    8.357096]  RSP <ffffc90000227c10>
[    8.379051] CR2: 0000000000000010
[    8.401736] ---[ end trace 5cbcd83a1f225ed3 ]---

This occur only when CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled and
CONFIG_RTC_DRV_CMOS builtin.

When cmos_set_alarm() is called dev is NULL and so trigger the deref via
cmos->irq

The problem comes from that the device is removed but no remove function
are called due to _exit_p().

This patch remove all _exit_p() annotation.
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

A bug fix for the ACPI side of this driver caused a harmless
build warning:

drivers/rtc/rtc-cmos.c:1115:13: error: 'cmos_check_acpi_rtc_status' defined but not used [-Werror=unused-function]
 static void cmos_check_acpi_rtc_status(struct device *dev,

We can avoid the warning and simplify the driver at the same time
by removing the #ifdef for CONFIG_PM and rely on the SIMPLE_DEV_PM_OPS()
to set everything up correctly. cmos_resume() has to get marked
as __maybe_unused so we don't introduce another warning, and
the two variants of cmos_poweroff() can get merged into one using
an IS_ENABLED() check.

Fixes: 983bf125 ("rtc: cmos: Clear ACPI-driven alarms upon resume")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Some platform firmware may interfere with the RTC alarm over suspend,
resulting in the kernel and hardware having different ideas about system
state but also potentially causing problems with firmware that assumes the
OS will clean this case up.  This patch restores the RTC alarm on resume
to ensure that kernel and hardware are in sync.

The case we've seen is Intel Rapid Start, which is a firmware-mediated
feature that automatically transitions systems from suspend-to-RAM to
suspend-to-disk without OS involvement.  It does this by setting the RTC
alarm and a flag that indicates that on wake it should perform the
transition rather than re-starting the OS.  However, if the OS has set a
wakeup alarm that would wake the machine earlier, it refuses to overwrite
it and allows the system to wake instead.

This fails in the following situation:

1) User configures Intel Rapid Start to transition after (say) 15
minutes
2) User suspends to RAM. Firmware sets the wakeup alarm for 15 minutes
in the future
3) User resumes after 5 minutes. Firmware does not reset the alarm, and
as such it is still set for 10 minutes in the future
4) User suspends after 5 minutes. Firmware notices that the alarm is set
for 5 minutes in the future, which is less than the 15 minute transition
threshold. It therefore assumes that the user wants the machine to wake
in 5 minutes
5) System resumes after 5 minutes

The worst case scenario here is that the user may have put the system in a
bag between (4) and (5), resulting in it running in a confined space and
potentially overheating.  This seems reasonably important.  The Rapid
Start support code got added in 3.11, but it can be configured in the
firmware regardless of kernel support.
Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Currently ACPI-driven alarms are not cleared when they wake the
system. As consequence, expired alarms must be manually cleared to
program a new alarm. Fix this by correctly handling ACPI-driven
alarms.

More specifically, the ACPI specification [1] provides for two
alternative implementations of the RTC. Depending on the
implementation, the driver either clear the alarm from the resume
callback or from ACPI interrupt handler:

 - The platform has the RTC wakeup status fixed in hardware
   (ACPI_FADT_FIXED_RTC is 0). In this case the driver can determine
   if the RTC was the reason of the wakeup from the resume callback
   by reading the RTC status register.

 - The platform has no fixed hardware feature event bits. In this
   case a GPE is used to wake the system and the driver clears the
   alarm from its handler.

[1] http://www.acpi.info/DOWNLOADS/ACPI_5_Errata%20A.pdfSigned-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

We have observed on few x86 machines with rtc-cmos device that
hpet_rtc_interrupt() is called just after irq registration and before
cmos_do_probe() could call hpet_rtc_timer_init().

So, neither hpet_default_delta nor hpet_t1_cmp is initialized by the time
interrupt is raised in the given situation, and this results in NMI
watchdog LOCKUP.

It has only been observed sporadically on kdump secondary kernels.

See the call trace:
---<-snip->---
[   27.913194] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0
[   27.915371] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-342.el7.x86_64 #1
[   27.917503] Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014
[   27.919455]  ffffffff8186a728 0000000059c82488 ffff880034e05af0 ffffffff81637bd4
[   27.921870]  ffff880034e05b70 ffffffff8163144a 0000000000000010 ffff880034e05b80
[   27.924257]  ffff880034e05b20 0000000059c82488 0000000000000000 0000000000000000
[   27.926599] Call Trace:
[   27.927352]  <NMI>  [<ffffffff81637bd4>] dump_stack+0x19/0x1b
[   27.929080]  [<ffffffff8163144a>] panic+0xd8/0x1e7
[   27.930588]  [<ffffffff8111d3e0>] ? restart_watchdog_hrtimer+0x50/0x50
[   27.932502]  [<ffffffff8111d4a2>] watchdog_overflow_callback+0xc2/0xd0
[   27.934427]  [<ffffffff811612c1>] __perf_event_overflow+0xa1/0x250
[   27.936232]  [<ffffffff81161d94>] perf_event_overflow+0x14/0x20
[   27.937957]  [<ffffffff81032ae8>] intel_pmu_handle_irq+0x1e8/0x470
[   27.939799]  [<ffffffff8164164b>] perf_event_nmi_handler+0x2b/0x50
[   27.941649]  [<ffffffff81640d99>] nmi_handle.isra.0+0x69/0xb0
[   27.943348]  [<ffffffff81640f49>] do_nmi+0x169/0x340
[   27.944802]  [<ffffffff816401d3>] end_repeat_nmi+0x1e/0x2e
[   27.946424]  [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380
[   27.948197]  [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380
[   27.949992]  [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380
[   27.951816]  <<EOE>>  <IRQ>  [<ffffffff8108f5a3>] ? run_timer_softirq+0x43/0x340
[   27.954114]  [<ffffffff8111e24e>] handle_irq_event_percpu+0x3e/0x1e0
[   27.955962]  [<ffffffff8111e42d>] handle_irq_event+0x3d/0x60
[   27.957635]  [<ffffffff811210c7>] handle_edge_irq+0x77/0x130
[   27.959332]  [<ffffffff8101704f>] handle_irq+0xbf/0x150
[   27.960949]  [<ffffffff8164a86f>] do_IRQ+0x4f/0xf0
[   27.962434]  [<ffffffff8163faed>] common_interrupt+0x6d/0x6d
[   27.964101]  <EOI>  [<ffffffff8163f43b>] ? _raw_spin_unlock_irqrestore+0x1b/0x40
[   27.966308]  [<fffff8111ff07>] __setup_irq+0x2a7/0x570
[   28.067859]  [<ffffffff81056e60>] ? hpet_cpuhp_notify+0x140/0x140
[   28.069709]  [<ffffffff8112032c>] request_threaded_irq+0xcc/0x170
[   28.071585]  [<ffffffff814b24a6>] cmos_do_probe+0x1e6/0x450
[   28.073240]  [<ffffffff814b2710>] ? cmos_do_probe+0x450/0x450
[   28.074911]  [<ffffffff814b27cb>] cmos_pnp_probe+0xbb/0xc0
[   28.076533]  [<ffffffff8139b245>] pnp_device_probe+0x65/0xd0
[   28.078198]  [<ffffffff813f8ca7>] driver_probe_device+0x87/0x390
[   28.079971]  [<ffffffff813f9083>] __driver_attach+0x93/0xa0
[   28.081660]  [<ffffffff813f8ff0>] ? __device_attach+0x40/0x40
[   28.083662]  [<ffffffff813f6a13>] bus_for_each_dev+0x73/0xc0
[   28.085370]  [<ffffffff813f86fe>] driver_attach+0x1e/0x20
[   28.086974]  [<ffffffff813f8250>] bus_add_driver+0x200/0x2d0
[   28.088634]  [<ffffffff81ade49a>] ? rtc_sysfs_init+0xe/0xe
[   28.090349]  [<ffffffff813f9704>] driver_register+0x64/0xf0
[   28.091989]  [<ffffffff8139b070>] pnp_register_driver+0x20/0x30
[   28.093707]  [<ffffffff81ade4ab>] cmos_init+0x11/0x71
---<-snip->---

This patch moves hpet_rtc_timer_init() before IRQ registration, so that we
can gracefully handle such spurious interrupts. It also masks HPET RTC
interrupts, in case IRQ registration fails.

We were able to reproduce the problem in maximum 15 trials of kdump
secondary kernel boot on an hp-dl160gen8 FCoE host machine without this
patch.  However, more than 35 trials went fine after applying this patch.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPratyush Anand <panand@redhat.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Since commit d68778b8 ("rtc: initialize output parameter for read
alarm to "uninitialized"") there is no need to explicitly set
unsupported members to -1. So drop the respective assignments from
drivers.
Signed-off-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

nn10300 has a dependency on mc146818_get_time/mc146818_set_time,
which we want to move from the mc146818rtc.h header into the
rtc subsystem, which in turn is not usable on mn10300.

This changes mn10300 to use the modern rtc-cmos driver instead
of the old RTC driver, and that in turn lets us completely
remove the read_persistent_clock/update_persistent_clock callbacks.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Drivers should not really include stuff from asm-generic directly,
and the PC-style cmos rtc driver does this in order to reuse the
mc146818 implementation of get_rtc_time/set_rtc_time rather than
the architecture specific one for the architecture it gets built for.

To make it more obvious what is going on, this moves and renames the
two functions into include/linux/mc146818rtc.h, which holds the
other mc146818 specific code. Ideally it would be in a .c file,
but that would require extra infrastructure as the functions are
called by multiple drivers with conflicting dependencies.

With this change, the asm-generic/rtc.h header also becomes much
more generic, so it can be reused more easily across any architecture
that still relies on the genrtc driver.

The only caller of the internal __get_rtc_time/__set_rtc_time
functions is in arch/alpha/kernel/rtc.c, and we just change those
over to the new naming.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The Microsoft Surface 3 tablet shares interrupt line between RTC and one of SPI
controllers. However, the rtc_cmos driver doesn't allow shared interrupts and
user sees the following warning

genirq: Flags mismatch irq 8. 00000080 (8086228E:02) vs. 00000000 (rtc0)
...
[<ffffffffa004eb01>] pxa2xx_spi_probe+0x151/0x600 [spi_pxa2xx_platform]

Allow RTC driver to use shared interrupts.

Seems we are on the safe side to do just this simple change since
cmos_interrupt() handler checks for the actual hardware status anyway.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The change removes redundant sysfs binary file boundary checks, since
this task is already done on caller side in fs/sysfs/file.c
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Commit d5a1c7e3 ("rtc-cmos: Add an alarm disable quirk") that
added a special quirk is not needed because [PATCH 1/2] of this
patchset makes the kernel more robust:
rtc-cmos: Cancel alarm timer if alarm time is equal to now+1 seconds
Signed-off-by: NAdrian Huang <ahuang12@lenovo.com>
Tested-by: NEgbert Eich <eich@suse.de>
Tested-by: NDiego Ercolani <diego.ercolani@gmail.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Steps to reproduce the problem:
	1) Enable RTC wake-up option in BIOS Setup
	2) Issue one of these commands in the OS: "poweroff"
	   or "shutdown -h now"
	3) System will shut down and then reboot automatically

Root-cause of the issue:
	1) During the shutdown process, the hwclock utility is used
	   to save the system clock to hardware clock (RTC).
	2) The hwclock utility invokes ioctl() with RTC_UIE_ON. The
	   kernel configures the RTC alarm for the periodic interrupt
	   (every 1 second).
	3) The hwclock uitlity closes the /dev/rtc0 device, and the
	   kernel disables the RTC alarm irq (AIE bit of Register B)
	   via ioctl() with RTC_UIE_OFF. But, the configured alarm
	   time is the current_time + 1.
	4) After the next 1 second is elapsed, the AF (alarm
	   interrupt flag) of Register C is set.
	5) The S5 handler in BIOS is invoked to configure alarm
	   registers (enable AIE bit and configure alarm date/time).
	   But, BIOS does not clear the previous interrupt status
	   during alarm configuration. Therefore, "AF=AIE=1" causes
	   the rtc device to trigger an interrupt.
	6) So, the machine reboots automatically right after shutdown.

This patch cancels the alarm timer if the following condictions are
met (suggested by Alexandre):
	1) The configured alarm time is equal to current_time + 1
	   seconds.
	2) The AIE timer is not in use.

The member 'alarm_expires' is introduced in struct cmos_rtc because
of the following reasons:
	1) The configured alarm time can be retrieved from
	   cmos_read_alarm(), but we need to take the 'wrapped
	   timestamp' and 'time rollover' into consideration. The
	   function __rtc_read_alarm() eliminates the concerns. To
	   avoid the duplicated code in the lower level RTC driver,
	   invoking __rtc_read_alarm from the lower level RTC driver
	   is not encouraged. Moreover, the compilation error 'the
	   undefined __rtc_read_alarm" is observed if the lower level
	   RTC driver is compiled as a kernel module.
	2) The uie_rtctimer.node.expires and aie_timer.node.expires can
	   be retrieved for the configured alarm time. But, the problem
	   is that either of them might configure the CMOS alarm time.
	   We cannot make sure UIE timer or AIE tiemr configured the
	   CMOS alarm time before. (uie_rtctimer or aie_timer is enabled
	   and then is disabled).
	3) The patch introduces the member 'alarm_expires' to keep the
	   newly configured alarm time, so the above-mentioned concerns
	   can be eliminated.

The issue goes away after 20-time shutdown tests.
Signed-off-by: NAdrian Huang <ahuang12@lenovo.com>
Tested-by: NEgbert Eich <eich@suse.de>
Tested-by: NDiego Ercolani <diego.ercolani@gmail.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Neaten the logging a bit by adding #define pr_fmt

Miscellanea:

o Remove __FILE__/__func__ uses
o Coalesce formats adding missing spaces
o Align arguments
o (rtc-cmos) Integrated 2 consecutive messages
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b5ada460 ("drivers/rtc/rtc-cmos.c: fix compilation warning
when !CONFIG_PM_SLEEP") broke wakeup from S5 by making cmos_poweroff a
nop unless CONFIG_PM_SLEEP was defined.

Fix this by restricting the #ifdef to cmos_resume and restoring the old
dependency on CONFIG_PM for cmos_suspend and cmos_poweroff.
Signed-off-by: NDaniel Glöckner <daniel-gl@gmx.net>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This brings in drivers/char/rtc.c functionality required for DECstation
and, should the maintainers decide to switch, Alpha systems to use
rtc-cmos.

Specifically these features are made available:

* RTC iomem rather than x86/PCI port I/O mapping, controlled with the
  RTC_IOMAPPED macro as with the original driver.  The DS1287A chip in all
  DECstation systems is mapped in the host bus address space as a
  contiguous block of 64 32-bit words of which the least significant byte
  accesses the RTC chip for both reads and writes.  All the address and
  data window register accesses are made transparently by the chipset glue
  logic so that the device appears directly mapped on the host bus.

* A way to set the size of the address space explicitly with the
  newly-added `address_space' member of the platform part of the RTC
  device structure.  This avoids the unreliable heuristics that does not
  work in a setup where the RTC is not explicitly accessed with the usual
  address and data window register pair.

* The ability to use the RTC periodic interrupt as a system clock
  device, which is implemented by arch/mips/kernel/cevt-ds1287.c for
  DECstation systems and takes the RTC interrupt away from the RTC driver.
   Eventually hooking back to the clock device's interrupt handler should
  be possible for the purpose of the alarm clock and possibly also
  update-in-progress interrupt, but this is not done by this change.

  o To avoid interfering with the clock interrupt all the places where
    the RTC interrupt mask is fiddled with are only executed if and IRQ
    has been assigned to the RTC driver.

  o To avoid changing the clock setup Register A is not fiddled with
    if CMOS_RTC_FLAGS_NOFREQ is set in the newly-added `flags' member of
    the platform part of the RTC device structure.  Originally, in
    drivers/char/rtc.c, this was keyed with the absence of the RTC
    interrupt, just like the interrupt mask, but there only the periodic
    interrupt frequency is set, whereas rtc-cmos also sets the divider
    bits.  Therefore a new flag is introduced so that systems where the
    RTC interrupt is not usable rather than used as a system clock device
    can fully initialise the RTC.

* A small clean-up is made to the IRQ assignment code that makes the IRQ
  number hardcoded to -1 rather than arbitrary -ENXIO (or whatever error
  happens to be returned by platform_get_irq) where no IRQ has been
  assigned to the RTC driver (NO_IRQ might be another candidate, but it
  looks like this macro has inconsistent or missing definitions and
  limited use and might therefore be unsafe).

Verified to work correctly with a DECstation 5000/240 system.

[akpm@linux-foundation.org: fix weird code layout]
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_PM will be set also if only CONFIG_PM_RUNTIME is set which causes
the compiler to emit following warning:

  drivers/rtc/rtc-cmos.c:845:12: warning: =E2=80=98cmos_resume=E2=80=99 defined but not used [-Wunused-function]

Fix this by using CONFIG_PM_SLEEP instead of CONFIG_PM and removing it
from the driver pm ops as this has been taken care by
SIMPLE_DEV_PM_OPS() already.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If hpet_register_irq_handler() fails, cmos_do_probe() will incorrectly
return 0.
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

device_driver.name is "const char *"
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

41c7f742 ("rtc: Disable the alarm in the hardware (v2)") added the
functionality to disable the RTC wake alarm when shutting down the box.

However, there are at least two b0rked BIOSes we know about:

https://bugzilla.novell.com/show_bug.cgi?id=812592
https://bugzilla.novell.com/show_bug.cgi?id=805740

where, when wakeup alarm is enabled in the BIOS, the machine reboots
automatically right after shutdown, regardless of what wakeup time is
programmed.

Bisecting the issue lead to this patch so disable its functionality with
a DMI quirk only for those boxes.

Cc: Brecht Machiels <brecht@mos6581.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
[jstultz: Changed variable name for clarity, added extra dmi entry]
Tested-by: NBrecht Machiels <brecht@mos6581.org>
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Driver core sets the driver data to NULL upon device_release or on probe
failure.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert drivers/rtc/rtc-cmos to use dev_pm_ops instead of legacy pm_ops.
This patch depends on pnp driver bus ops change to invoke pnp_driver
dev_pm_ops.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
Cc: Ashley Lai <ashley@ashleylai.com>
Cc: Rajiv Andrade <mail@srajiv.net>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Cc: Sirrix AG <tpmdd@sirrix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Peter Hüwe <PeterHuewe@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The bios may clear the rtc control register when resuming the system. Since the
cmos interrupt handler may now be run before the rtc_cmos is resumed, this can
cause the interrupt handler to ignore an alarm since the alarm bit is not set in
the rtc control register. To work around this, check if the rtc_cmos is
suspended and use the stored value for the rtc control register.
Signed-off-by: NDerek Basehore <dbasehore@chromium.org>
Reviewed-by: NSameer Nanda <snanda@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the following types of issues:

  ERROR: space required after that ',' (ctx:VxV)
  WARNING: please, no spaces at the start of a line
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During resume, we call hpet_rtc_timer_init after masking an irq bit in
hpet.  This will cause the call to hpet_disable_rtc_channel to be undone
if RTC_AIE is the only bit not masked.

Allowing the cmos interrupt handler to run before resuming caused some
issues where the timer for the alarm was not removed.  This would cause
other, later timers to not be cleared, so utilities such as hwclock
would time out when waiting for the update interrupt.

[akpm@linux-foundation.org: coding-style tweak]
Signed-off-by: NDerek Basehore <dbasehore@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a bug where rtc alarms are ignored after the rtc cmos suspends
but before the system finishes suspend.  Since hpet emulation is
disabled and it still handles the interrupts, a wake event is never
registered which is done from the rtc layer.

This patch reverts commit d1b2efa8 ("rtc: disable hpet emulation on
suspend") which disabled hpet emulation.  To fix the problem mentioned
in that commit, hpet_rtc_timer_init() is called directly on resume.
Signed-off-by: NDerek Basehore <dbasehore@chromium.org>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the checkpatch warning as below:

  WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This eliminates having an #ifdef returning NULL for the case when OF is
disabled.  Maintains consistency in cases where OF is always selected.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If an RTC alarm fires just as suspend is happening, it is possible for
suspend to complete and the alarm to be missed.

To avoid the race, we must register the event with the PM core.

As the event is made visible to userspace through a thread which is
only scheduled by the interrupt, we need a pm_stay_awake/pm_relax
pair preventing suspend from the interrupt until the thread completes
its work.

This makes the pm_wakeup_event() call in cmos_interrupt unnecessary as
it provides suspend protection for all RTCs that use rtc_update_irq.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

When suspending the system with an important RTC wake alarm active,
it is possible that the RTC alarm will expire before the system has
gone to sleep (e.g. short alarm timer, or an unusually long suspend
routine).

If this happens, the RTC alarm should trigger a wakeup event, possibly
aborting system suspend. This condition can be detected in the form
of an RTC alarm interrupt.
Signed-off-by: NPaul Fox <pgf@laptop.org>
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

When the ACPI-driven RTC alarm wakes the system, report it as a wakeup
event. This allows userspace to determine that the reason for system
wakeup was RTC alarm.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Since commit e58aa3d2 ("genirq: run irq handlers with interrupts
disabled") we run all interrupt handlers with interrupts disabled and we
even check and yell when an interrupt handler returns with interrupts
enabled - see commit b738a50a ("genirq: warn when handler enables
interrupts").

So now this flag is a NOOP and can be removed.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NWan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix writing to NVRAM bank 2 in rtc-cmos driver.  It never worked since its
introduction in 2.6.28 because of a typo.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Now that the generic code handles UIE mode irqs via periodic
alarm interrupts, no one calls the
rtc_class_ops->update_irq_enable() method anymore.

This patch removes the driver hooks and implementations of
update_irq_enable if no one else is calling it.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: rtc-linux@googlegroups.com
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

With the generic rtc code now emulating PIE mode irqs via an
hrtimer, no one calls the rtc_class_ops->irq_set_freq call.

This patch removes the hook and deletes the driver functions
if no one else calls them.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: rtc-linux@googlegroups.com
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>