While here, update the code a bit.
Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is the heart of the wave 2 submission.  Add the code to trigger
drain and forget of any afected layouts.  In addition, we set a
"barrier", below which any LAYOUTGET reply is ignored.  This is to
compensate for the fact that we do not wait for outstanding LAYOUTGETs
to complete as per section 12.5.5.2.1 of RFC 5661.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is the xdr decoding for CB_LAYOUTRECALL.
Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will be required to allow us to grab reference outside of i_lock.
While we are at it, make put_layout_hdr take the same argument as all the
related functions.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Either a bad server reply, or our ignoring of multiple array segments in
a reply, can cause a reply to not meet our requirements.  Ensure
that we ignore such replies.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since this list will be used to search for layouts to recall,
this is necessary to avoid a race where the recall comes in,
sees there is nothing in the client list, and prepares to return
NOMATCHING, while the LAYOUTGET gets processed before the recall
updates the stateid.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs
using the previous stateid are completed.  This requires choosing the
stateid to encode earlier, so we can abort if one is not available (we
want to use the open stateid, but a LAYOUTGET is already out using
it), and adding a count of the number of outstanding rpc calls using
layout state (which for now consist solely of LAYOUTGETs).
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

No functional changes, just some code minor code rearrangement and
comments.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is to prepare the way for sensible io draining.  Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list.  Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This prepares for future changes, where the layout state needs
to change atomically with several other variables.  In particular,
it will need to know if lo->segs is empty, as we test that instead
of manipulating the NFS_LAYOUT_STATEID_SET bit.  Moreover, the
layoutstateid is not really a read-mostly structure, as it is
written almost as often as it is read.

The behavior of pnfs_get_layout_stateid is also slightly changed, so that
it no longer changes the stateid.  Its name is changed to +pnfs_choose_layoutget_stateid.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

While we are renaming all the fields, change lo->state to lo->plh_flags.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Comment references get_layout_hdr_locked, which never existed in
submitted code.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Differentiate from server backchannel
Signed-off-by: NAndy Adamson <andros@netapp.com>
Acked-by: NBruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently session draining only drains the fore channel.
The back channel processing must also be drained.

Use the back channel highest_slot_used to indicate that a callback is being
processed by the callback thread.  Move the session complete to be per channel.

When the session is draininig, wait for any current back channel processing
to complete and stop all new back channel processing by returning NFS4ERR_DELAY
to the back channel client.

Drain the back channel, then the fore channel.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Acked-by: NBruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fixes a bug where the nfs_client could be freed during callback processing.
Refactor nfs_find_client to use minorversion specific means to locate the
correct nfs_client structure.

In the NFS layer, V4.0 clients are found using the callback_ident field in the
CB_COMPOUND header.  V4.1 clients are found using the sessionID in the
CB_SEQUENCE operation which is also compared against the sessionID associated
with the back channel thread after a successful CREATE_SESSION.

Each of these methods finds the one an only nfs_client associated
with the incoming callback request - so nfs_find_client_next is not needed.

In the RPC layer, the pg_authenticate call needs to find the nfs_client. For
the v4.0 callback service, the callback identifier has not been decoded so a
search by address, version, and minorversion is used.  The sessionid for the
sessions based callback service has (usually) not been set for the
pg_authenticate on a CB_NULL call which can be sent prior to the return
of a CREATE_SESSION call, so the sessionid associated with the back channel
thread is not used to find the client in pg_authenticate for CB_NULL calls.

Pass the referenced nfs_client to each CB_COMPOUND operation being proceesed
via the new cb_process_state structure. The reference is held across
cb_compound processing.

Use the new cb_process_state struct to move the NFS4ERR_RETRY_UNCACHED_REP
processing from process_op into nfs4_callback_sequence where it belongs.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The sessions based callback service is started prior to the CREATE_SESSION call
so that it can handle CB_NULL requests which can be sent before the
CREATE_SESSION call returns and the session ID is known.

Set the callback sessionid after a sucessful CREATE_SESSION.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use the small id to pointer translator service to provide a unique callback
identifier per SETCLIENTID call used to identify the v4.0 callback service
associated with the clientid.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Resetting the client minor version operations causes nfs4_destroy_callback
to fail to shutdown the NFSv4.1 callback service.

There is no reason to reset the client minorversion operations when the
nfs_client struct is being freed.

Remove the minorverion reset and rename the function.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The new back channel transport means we call the normal creation routine as
well as svc_xprt_put.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch make nfsv4 use the generic xattr handling code
to get the nfsv4 acl. This will help us to add richacl
support to nfsv4 in later patches
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We want to skip VFS applying mode for NFS. So set MS_POSIXACL always
and selectively use umask. Ideally we would want to use umask only
when we don't have inheritable ACEs set. But NFS currently don't
allow to send umask to the server. So this is best what we can do
and this is consistent with NFSv3
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use ERR_CAST() intead of wierd-looking cast.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Trivial, but confusing when you're trying to grep through this
code....
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Hi,

In fs/nfs/proc.c::nfs_proc_symlink() we will leak memory if either
nfs_alloc_fhandle() or nfs_alloc_fattr() returns NULL but the other one
doesn't.
This patch ensures memory allocated by one when the other fails is always
released (this is safe since nfs_free_fattr() and nfs_free_fhandle() both
call kfree which deals gracefully with NULL pointers).
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Update: added check for zero value as it was before (note: can't simply check
mountd_port for positive value because it's typeof unsigned short)

Default value for mount server port is set to NFS_UNSPEC_PORT (-1) and will not
be changed during parsing mount options for mound data version 6. This default
value will be showed for mountport in /proc/mounts always since current default
check is for zero value. This small mistake leads to big problem, because
during umount.nfs execution from old user-space utils (at least nfs-utils
1.0.9) this value will be used as the server port to connect to. This request
will be rejected (since port is 65535) and thus nfs mount point can't be
unmounted.

Note from Chuck Lever (chuck.lever@oracle.com): this is only possible if
/etc/mtab is a link to /proc/mounts.  Not all systems have this configuration.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Note that cl_lease_time is in jiffies.  This can cause a very long wait
in the NFS4ERR_CLID_INUSE case.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Take advantage of kmem_cache_zalloc() in nfs_page_alloc(). Save a call to
memset() and a few bytes.

Before:
 [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o
    text    data     bss     dec     hex filename
    1765       0       8    1773     6ed fs/nfs/pagelist.o
After:
 [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o
    text    data     bss     dec     hex filename
    1749       0       8    1757     6dd fs/nfs/pagelist.o
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that all client-side XDR decoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC res *] anywhere.  We can construct an xdr_stream in the
generic RPC code, instead of in each decoder function.

This is a refactoring change.  It should not cause different behavior.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that all client-side XDR encoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC arg *] anywhere.  We can construct an xdr_stream in the
generic RPC code, instead of in each encoder function.

Also, all the client-side encoder functions return 0 now, making a
return value superfluous.  Take this opportunity to convert them to
return void instead.

This is a refactoring change.  It should not cause different behavior.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

The UMNT request has a NULL response.  There's no need to set up a
mountres structure for it.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

The trend in the other XDR encoder functions is to BUG() when encoding
problems occur, since a problem here is always due to a local coding
error.  Then, instead of a status, zero is unconditionally returned.

Update the mount client XDR encoders to behave this way.

To finish the update, use the new-style be32_to_cpup() and
cpu_to_be32() macros, and compute the buffer sizes using raw integers
instead of sizeof().  This matches the conventions used in other XDR
functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

.../linux/nfs-2.6/fs/nfs/nfs4xdr.c: In function ‘decode_getdeviceinfo’:
.../linux/nfs-2.6/fs/nfs/nfs4xdr.c:5008: warning: comparison between signed and unsigned integer expressions
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

The pointer returned by ->decode_dirent() is no longer used as a
pointer.  The only call site (xdr_decode() in fs/nfs/dir.c) simply
extracts the errno value encoded in the pointer.  Replace the
returned pointer with a standard integer errno return value.

Also, pass the "server" argument as part of the nfs_entry instead of
as a separate parameter.  It's faster to derive "server" in
nfs_readdir_xdr_to_array() since we already have the directory's inode
handy.  "server" ought to be invariant for a set of entries in the
same directory, right?

The legacy versions of decode_dirent() don't use "server" anyway, so
it's wasted work for them to derive and pass "server" for each entry.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When computing the length of the header, be sure to include the
four octets consumed by "count".
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

When I was making other changes in this area, checkscript.pl
complained about the use of leading blanks in the PROC macros in the
xdr files.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>