- 24 10月, 2014 4 次提交
-
-
由 Martin KaFai Lau 提交于
This patch save the fn before doing rt6_backtrack. Hence, without redo-ing the fib6_lookup(), saved_fn can be used to redo rt6_select() with RT6_LOOKUP_F_REACHABLE off. Some minor changes I think make sense to review as a single patch: * Remove the 'out:' goto label. * Remove the 'reachable' variable. Only use the 'strict' variable instead. After this patch, "failing ip6_ins_rt()" should be the only case that requires a redo of fib6_lookup(). Cc: David Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
When there is a RTF_CACHE hit, no need to redo fib6_lookup() with reachable=0. Cc: David Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
It is the prep work to reduce the number of calls to fib6_lookup(). The BACKTRACK macro could be hard-to-read and error-prone due to its side effects (mainly goto). This patch is to: 1. Replace BACKTRACK macro with a function (fib6_backtrack) with the following return values: * If it is backtrack-able, returns next fn for retry. * If it reaches the root, returns NULL. 2. The caller needs to decide if a backtrack is needed (by testing rt == net->ipv6.ip6_null_entry). 3. Rename the goto labels in ip6_pol_route() to make the next few patches easier to read. Cc: David Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kenjiro Nakayama 提交于
Remove trailing whitespace in tcp.h icmp.c syncookies.c Signed-off-by: NKenjiro Nakayama <nakayamakenjiro@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 10月, 2014 10 次提交
-
-
由 Haiyang Zhang 提交于
total_data_buflen is used by netvsc_send() to decide if a packet can be put into send buffer. It should also include the size of RNDIS message before the Ethernet frame. Otherwise, a messge with total size bigger than send_section_size may be copied into the send buffer, and cause data corruption. [Request to include this patch to the Stable branches] Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver fixes 2014-10-22 The following series of patches includes fixes to the driver. - Properly handle feature changes via ethtool by using correctly sized variables - Perform proper napi packet counting and budget checking This patch series is based on net. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Currently the amd-xgbe driver increments the packets processed counter each time a descriptor is processed. Since a packet can be represented by more than one descriptor incrementing the counter in this way is not appropriate. Also, since multiple descriptors cause the budget check to be short circuited, sometimes the returned value from the poll function would be larger than the budget value resulting in a WARN_ONCE being triggered. Update the polling logic to properly account for the number of packets processed and exit when the budget value is reached. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
The ndo_set_features callback function was improperly using an unsigned int to save the current feature value for features such as NETIF_F_RXCSUM. Since that feature is in the upper 32 bits of a 64 bit variable the result was always 0 making it not possible to actually turn off the hardware RX checksum support. Change the unsigned int type to the netdev_features_t type in order to properly capture the current value and perform the proper operation. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Zabel 提交于
Since commit 278d2404 (net: fec: ptp: Enable PPS output based on ptp clock) fec_enet_interrupt calls fec_ptp_check_pps_event unconditionally, which calls into ptp_clock_event. If fep->ptp_clock is NULL, ptp_clock_event tries to dereference the NULL pointer. Since on i.MX53 fep->bufdesc_ex is not set, fec_ptp_init is never called, and fep->ptp_clock is NULL, which reliably causes a kernel panic. This patch adds a check for fep->ptp_clock == NULL in fec_enet_interrupt. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
The commit "net: Save TX flow hash in sock and set in skbuf on xmit" introduced the inet_set_txhash() and ip6_set_txhash() routines to calculate and record flow hash(sk_txhash) in the socket structure. sk_txhash is used to set skb->hash which is used to spread flows across multiple TXQs. But, the above routines are invoked before the source port of the connection is created. Because of this all outgoing connections that just differ in the source port get hashed into the same TXQ. This patch fixes this problem for IPv4/6 by invoking the the above routines after the source port is available for the socket. Fixes: b73c3d0e("net: Save TX flow hash in sock and set in skbuf on xmit") Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
pskb_may_pull() maybe change skb->data and make nh and exthdr pointer oboslete, so recompute the nd and exthdr Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 LEROY Christophe 提交于
After interface restart (eg: after link disconnection/reconnection), the bridge function doesn't work anymore. This is due to the promiscuous mode being cleared by the restart. The mac-fcc already includes code to set the promiscuous mode back during the restart. This patch adds the same handling to mac-fec and mac-scc. Tested with bridge function on MPC885 with FEC. Reported-by: NGermain Montoies <germain.montoies@c-s.fr> Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karl Beldan 提交于
The crafted header start address is from a driver supplied buffer, which one can reasonably expect to be aligned on a 4-bytes boundary. However ATM the TSO helper API is only used by ethernet drivers and the tcp header will then be aligned to a 2-bytes only boundary from the header start address. Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Cooper 提交于
write_count and insert_count can wrap around, making > check invalid. Fixes: 70b33fb0 ("sfc: add support for skb->xmit_more"). Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 10月, 2014 8 次提交
-
-
由 Sabrina Dubroca 提交于
Use netdev_alloc_pcpu_stats to allocate percpu stats and initialize syncp. Fixes: 22e0f8b9 "net: sched: make bstats per cpu and estimator RCU safe" Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
while comparing for verifier state equivalency the comparison was missing a check for uninitialized register. Make sure it does so and add a testcase. Fixes: f1bca824 ("bpf: add search pruning optimization to verifier") Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The synchronize_rcu() in netlink_release() introduces unacceptable latency. Reintroduce minimal lookup so we can drop the synchronize_rcu() until socket destruction has been RCUfied. Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: NSteinar H. Gunderson <sgunderson@bigfoot.com> Reported-and-tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
When running tipcTC&tipcTS test suite, below lockdep unsafe locking scenario is reported: [ 1109.997854] [ 1109.997988] ================================= [ 1109.998290] [ INFO: inconsistent lock state ] [ 1109.998575] 3.17.0-rc1+ #113 Not tainted [ 1109.998762] --------------------------------- [ 1109.998762] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 1109.998762] swapper/7/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 1109.998762] (slock-AF_TIPC){+.?...}, at: [<ffffffffa0011969>] tipc_sk_rcv+0x49/0x2b0 [tipc] [ 1109.998762] {SOFTIRQ-ON-W} state was registered at: [ 1109.998762] [<ffffffff810a4770>] __lock_acquire+0x6a0/0x1d80 [ 1109.998762] [<ffffffff810a6555>] lock_acquire+0x95/0x1e0 [ 1109.998762] [<ffffffff81a2d1ce>] _raw_spin_lock+0x3e/0x80 [ 1109.998762] [<ffffffffa0011969>] tipc_sk_rcv+0x49/0x2b0 [tipc] [ 1109.998762] [<ffffffffa0004fe8>] tipc_link_xmit+0xa8/0xc0 [tipc] [ 1109.998762] [<ffffffffa000ec6f>] tipc_sendmsg+0x15f/0x550 [tipc] [ 1109.998762] [<ffffffffa000f165>] tipc_connect+0x105/0x140 [tipc] [ 1109.998762] [<ffffffff817676ee>] SYSC_connect+0xae/0xc0 [ 1109.998762] [<ffffffff81767b7e>] SyS_connect+0xe/0x10 [ 1109.998762] [<ffffffff817a9788>] compat_SyS_socketcall+0xb8/0x200 [ 1109.998762] [<ffffffff81a306e5>] sysenter_dispatch+0x7/0x1f [ 1109.998762] irq event stamp: 241060 [ 1109.998762] hardirqs last enabled at (241060): [<ffffffff8105a4ad>] __local_bh_enable_ip+0x6d/0xd0 [ 1109.998762] hardirqs last disabled at (241059): [<ffffffff8105a46f>] __local_bh_enable_ip+0x2f/0xd0 [ 1109.998762] softirqs last enabled at (241020): [<ffffffff81059a52>] _local_bh_enable+0x22/0x50 [ 1109.998762] softirqs last disabled at (241021): [<ffffffff8105a626>] irq_exit+0x96/0xc0 [ 1109.998762] [ 1109.998762] other info that might help us debug this: [ 1109.998762] Possible unsafe locking scenario: [ 1109.998762] [ 1109.998762] CPU0 [ 1109.998762] ---- [ 1109.998762] lock(slock-AF_TIPC); [ 1109.998762] <Interrupt> [ 1109.998762] lock(slock-AF_TIPC); [ 1109.998762] [ 1109.998762] *** DEADLOCK *** [ 1109.998762] [ 1109.998762] 2 locks held by swapper/7/0: [ 1109.998762] #0: (rcu_read_lock){......}, at: [<ffffffff81782dc9>] __netif_receive_skb_core+0x69/0xb70 [ 1109.998762] #1: (rcu_read_lock){......}, at: [<ffffffffa0001c90>] tipc_l2_rcv_msg+0x40/0x260 [tipc] [ 1109.998762] [ 1109.998762] stack backtrace: [ 1109.998762] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.17.0-rc1+ #113 [ 1109.998762] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 1109.998762] ffffffff82745830 ffff880016c03828 ffffffff81a209eb 0000000000000007 [ 1109.998762] ffff880017b3cac0 ffff880016c03888 ffffffff81a1c5ef 0000000000000001 [ 1109.998762] ffff880000000001 ffff880000000000 ffffffff81012d4f 0000000000000000 [ 1109.998762] Call Trace: [ 1109.998762] <IRQ> [<ffffffff81a209eb>] dump_stack+0x4e/0x68 [ 1109.998762] [<ffffffff81a1c5ef>] print_usage_bug+0x1f1/0x202 [ 1109.998762] [<ffffffff81012d4f>] ? save_stack_trace+0x2f/0x50 [ 1109.998762] [<ffffffff810a406c>] mark_lock+0x28c/0x2f0 [ 1109.998762] [<ffffffff810a3440>] ? print_irq_inversion_bug.part.46+0x1f0/0x1f0 [ 1109.998762] [<ffffffff810a467d>] __lock_acquire+0x5ad/0x1d80 [ 1109.998762] [<ffffffff810a70dd>] ? trace_hardirqs_on+0xd/0x10 [ 1109.998762] [<ffffffff8108ace8>] ? sched_clock_cpu+0x98/0xc0 [ 1109.998762] [<ffffffff8108ad2b>] ? local_clock+0x1b/0x30 [ 1109.998762] [<ffffffff810a10dc>] ? lock_release_holdtime.part.29+0x1c/0x1a0 [ 1109.998762] [<ffffffff8108aa05>] ? sched_clock_local+0x25/0x90 [ 1109.998762] [<ffffffffa000dec0>] ? tipc_sk_get+0x60/0x80 [tipc] [ 1109.998762] [<ffffffff810a6555>] lock_acquire+0x95/0x1e0 [ 1109.998762] [<ffffffffa0011969>] ? tipc_sk_rcv+0x49/0x2b0 [tipc] [ 1109.998762] [<ffffffff810a6fb6>] ? trace_hardirqs_on_caller+0xa6/0x1c0 [ 1109.998762] [<ffffffff81a2d1ce>] _raw_spin_lock+0x3e/0x80 [ 1109.998762] [<ffffffffa0011969>] ? tipc_sk_rcv+0x49/0x2b0 [tipc] [ 1109.998762] [<ffffffffa000dec0>] ? tipc_sk_get+0x60/0x80 [tipc] [ 1109.998762] [<ffffffffa0011969>] tipc_sk_rcv+0x49/0x2b0 [tipc] [ 1109.998762] [<ffffffffa00076bd>] tipc_rcv+0x5ed/0x960 [tipc] [ 1109.998762] [<ffffffffa0001d1c>] tipc_l2_rcv_msg+0xcc/0x260 [tipc] [ 1109.998762] [<ffffffffa0001c90>] ? tipc_l2_rcv_msg+0x40/0x260 [tipc] [ 1109.998762] [<ffffffff81783345>] __netif_receive_skb_core+0x5e5/0xb70 [ 1109.998762] [<ffffffff81782dc9>] ? __netif_receive_skb_core+0x69/0xb70 [ 1109.998762] [<ffffffff81784eb9>] ? dev_gro_receive+0x259/0x4e0 [ 1109.998762] [<ffffffff817838f6>] __netif_receive_skb+0x26/0x70 [ 1109.998762] [<ffffffff81783acd>] netif_receive_skb_internal+0x2d/0x1f0 [ 1109.998762] [<ffffffff81785518>] napi_gro_receive+0xd8/0x240 [ 1109.998762] [<ffffffff815bf854>] e1000_clean_rx_irq+0x2c4/0x530 [ 1109.998762] [<ffffffff815c1a46>] e1000_clean+0x266/0x9c0 [ 1109.998762] [<ffffffff8108ad2b>] ? local_clock+0x1b/0x30 [ 1109.998762] [<ffffffff8108aa05>] ? sched_clock_local+0x25/0x90 [ 1109.998762] [<ffffffff817842b1>] net_rx_action+0x141/0x310 [ 1109.998762] [<ffffffff810bd710>] ? handle_fasteoi_irq+0xe0/0x150 [ 1109.998762] [<ffffffff81059fa6>] __do_softirq+0x116/0x4d0 [ 1109.998762] [<ffffffff8105a626>] irq_exit+0x96/0xc0 [ 1109.998762] [<ffffffff81a30d07>] do_IRQ+0x67/0x110 [ 1109.998762] [<ffffffff81a2ee2f>] common_interrupt+0x6f/0x6f [ 1109.998762] <EOI> [<ffffffff8100d2b7>] ? default_idle+0x37/0x250 [ 1109.998762] [<ffffffff8100d2b5>] ? default_idle+0x35/0x250 [ 1109.998762] [<ffffffff8100dd1f>] arch_cpu_idle+0xf/0x20 [ 1109.998762] [<ffffffff810999fd>] cpu_startup_entry+0x27d/0x4d0 [ 1109.998762] [<ffffffff81034c78>] start_secondary+0x188/0x1f0 When intra-node messages are delivered from one process to another process, tipc_link_xmit() doesn't disable BH before it directly calls tipc_sk_rcv() on process context to forward messages to destination socket. Meanwhile, if messages delivered by remote node arrive at the node and their destinations are also the same socket, tipc_sk_rcv() running on process context might be preempted by tipc_sk_rcv() running BH context. As a result, the latter cannot obtain the socket lock as the lock was obtained by the former, however, the former has no chance to be run as the latter is owning the CPU now, so headlock happens. To avoid it, BH should be always disabled in tipc_sk_rcv(). Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Locking dependency detected below possible unsafe locking scenario: CPU0 CPU1 T0: tipc_named_rcv() tipc_rcv() T1: [grab nametble write lock]* [grab node lock]* T2: tipc_update_nametbl() tipc_node_link_up() T3: tipc_nodesub_subscribe() tipc_nametbl_publish() T4: [grab node lock]* [grab nametble write lock]* The opposite order of holding nametbl write lock and node lock on above two different paths may result in a deadlock. If we move the the updating of the name table after link state named out of node lock, the reverse order of holding locks will be eliminated, and as a result, the deadlock risk. Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Govindarajulu Varadarajan says: ==================== enic: Bug fixes This series fixes the following problem. Please apply this to net. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
In enic_stop, we disable preemption using local_bh_disable(). We disable preemption to wait for busy_poll to finish. napi_disable should not be called here as it might sleep. Moving napi_disable() call out side of local_bh_disable. BUG: sleeping function called from invalid context at include/linux/netdevice.h:477 in_atomic(): 1, irqs_disabled(): 0, pid: 443, name: ifconfig INFO: lockdep is turned off. Preemption disabled at:[<ffffffffa029c5c4>] enic_rfs_flw_tbl_free+0x34/0xd0 [enic] CPU: 31 PID: 443 Comm: ifconfig Not tainted 3.17.0-netnext-05504-g59f35b81 #268 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 ffff8800dac10000 ffff88020b8dfcb8 ffffffff8148a57c 0000000000000000 ffff88020b8dfcd0 ffffffff8107e253 ffff8800dac12a40 ffff88020b8dfd10 ffffffffa029305b ffff88020b8dfd48 ffff8800dac10000 ffff88020b8dfd48 Call Trace: [<ffffffff8148a57c>] dump_stack+0x4e/0x7a [<ffffffff8107e253>] __might_sleep+0x123/0x1a0 [<ffffffffa029305b>] enic_stop+0xdb/0x4d0 [enic] [<ffffffff8138ed7d>] __dev_close_many+0x9d/0xf0 [<ffffffff8138ef81>] __dev_close+0x31/0x50 [<ffffffff813974a8>] __dev_change_flags+0x98/0x160 [<ffffffff81397594>] dev_change_flags+0x24/0x60 [<ffffffff814085fd>] devinet_ioctl+0x63d/0x710 [<ffffffff81139c16>] ? might_fault+0x56/0xc0 [<ffffffff81409ef5>] inet_ioctl+0x65/0x90 [<ffffffff813768e0>] sock_do_ioctl+0x20/0x50 [<ffffffff81376ebb>] sock_ioctl+0x20b/0x2e0 [<ffffffff81197250>] do_vfs_ioctl+0x2e0/0x500 [<ffffffff81492619>] ? sysret_check+0x22/0x5d [<ffffffff81285f23>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8109fe19>] ? trace_hardirqs_on_caller+0x119/0x270 [<ffffffff811974ac>] SyS_ioctl+0x3c/0x80 [<ffffffff814925ed>] system_call_fastpath+0x1a/0x1f Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
The following warning is shown when spinlock debug is enabled. This occurs when enic_flow_may_expire timer function is running and enic_stop is called on same CPU. Fix this by using spink_lock_bh(). ================================= [ INFO: inconsistent lock state ] 3.17.0-netnext-05504-g59f35b81 #268 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. ifconfig/443 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&enic->rfs_h.lock)->rlock){+.?...}, at: enic_rfs_flw_tbl_free+0x34/0xd0 [enic] {IN-SOFTIRQ-W} state was registered at: [<ffffffff810a25af>] __lock_acquire+0x83f/0x21c0 [<ffffffff810a45f2>] lock_acquire+0xa2/0xd0 [<ffffffff814913fc>] _raw_spin_lock+0x3c/0x80 [<ffffffffa029c3d5>] enic_flow_may_expire+0x25/0x130[enic] [<ffffffff810bcd07>] call_timer_fn+0x77/0x100 [<ffffffff810bd8e3>] run_timer_softirq+0x1e3/0x270 [<ffffffff8105f9ae>] __do_softirq+0x14e/0x280 [<ffffffff8105fdae>] irq_exit+0x8e/0xb0 [<ffffffff8103da0f>] smp_apic_timer_interrupt+0x3f/0x50 [<ffffffff81493742>] apic_timer_interrupt+0x72/0x80 [<ffffffff81018143>] default_idle+0x13/0x20 [<ffffffff81018a6a>] arch_cpu_idle+0xa/0x10 [<ffffffff81097676>] cpu_startup_entry+0x2c6/0x330 [<ffffffff8103b7ad>] start_secondary+0x21d/0x290 irq event stamp: 2997 hardirqs last enabled at (2997): [<ffffffff81491865>] _raw_spin_unlock_irqrestore+0x65/0x90 hardirqs last disabled at (2996): [<ffffffff814915e6>] _raw_spin_lock_irqsave+0x26/0x90 softirqs last enabled at (2968): [<ffffffff813b57a3>] dev_deactivate_many+0x213/0x260 softirqs last disabled at (2966): [<ffffffff813b5783>] dev_deactivate_many+0x1f3/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&enic->rfs_h.lock)->rlock); <Interrupt> lock(&(&enic->rfs_h.lock)->rlock); *** DEADLOCK *** Reported-by: NJan Stancek <jstancek@redhat.com> Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2014 4 次提交
-
-
由 David S. Miller 提交于
Florian Westphal says: ==================== net: minor gso encapsulation fixes The following series fixes a minor bug in the gso segmentation handlers when encapsulation offload is used. Theoretically this could cause kernel panic when the stack tries to software-segment such a GRE offload packet, but it looks like there is only one affected call site (tbf scheduler) and it handles NULL return value. I've included a followup patch to add IS_ERR_OR_NULL checks where needed. While looking into this, I also found that size computation of the individual segments is incorrect if skb->encapsulation is set. Please see individual patches for delta vs. v1. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
if ->encapsulation is set we have to use inner_tcp_hdrlen and add the size of the inner network headers too. This is 'mostly harmless'; tbf might send skb that is slightly over quota or drop skb even if it would have fit. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
skb_gso_segment has three possible return values: 1. a pointer to the first segmented skb 2. an errno value (IS_ERR()) 3. NULL. This can happen when GSO is used for header verification. However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL and would oops when NULL is returned. Note that these call sites should never actually see such a NULL return value; all callers mask out the GSO bits in the feature argument. However, there have been issues with some protocol handlers erronously not respecting the specified feature mask in some cases. It is preferable to get 'have to turn off hw offloading, else slow' reports rather than 'kernel crashes'. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
skb_gso_segment() has a 'features' argument representing offload features available to the output path. A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use those instead of the provided ones when handing encapsulation/tunnels. Depending on dev->hw_enc_features of the output device skb_gso_segment() can then return NULL even when the caller has disabled all GSO feature bits, as segmentation of inner header thinks device will take care of segmentation. This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs that did not fit the remaining token quota as the segmentation does not work when device supports corresponding hw offload capabilities. Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2014 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains netfilter fixes for your net tree, they are: 1) Fix missing MODULE_LICENSE() in the new nf_reject_ipv{4,6} modules. 2) Restrict nat and masq expressions to the nat chain type. Otherwise, users may crash their kernel if they attach a nat/masq rule to a non nat chain. 3) Fix hook validation in nft_compat when non-base chains are used. Basically, initialize hook_mask to zero. 4) Make sure you use match/targets in nft_compat from the right chain type. The existing validation relies on the table name which can be avoided by 5) Better netlink attribute validation in nft_nat. This expression has to reject the configuration when no address and proto configurations are specified. 6) Interpret NFTA_NAT_REG_*_MAX if only if NFTA_NAT_REG_*_MIN is set. Yet another sanity check to reject incorrect configurations from userspace. 7) Conditional NAT attribute dumping depending on the existing configuration. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Morgan 提交于
The following patch fixes a bug which causes the ax88179_178a driver to be incapable of being added to a bond. When I brought up the issue with the bonding maintainers, they indicated that the real problem was with the NIC driver which must return zero for success (of setting the MAC address). I see that several other NIC drivers follow that pattern by either simply always returing zero, or by passing through a negative (error) result while rewriting any positive return code to zero. With that same philisophy applied to the ax88179_178a driver, it allows it to work correctly with the bonding driver. I believe this is suitable for queuing in -stable, as it's a small, simple, and obvious fix that corrects a defect with no other known workaround. This patch is against vanilla 3.17(.0). Signed-off-by: NIan Morgan <imorgan@primordial.ca> drivers/net/usb/ax88179_178a.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://github.com/jonmason/ntb由 Linus Torvalds 提交于
Pull ntb (non-transparent bridge) updates from Jon Mason: "Add support for Haswell NTB split BARs, a debugfs entry for basic debugging info, and some code clean-ups" * tag 'ntb-3.18' of git://github.com/jonmason/ntb: ntb: Adding split BAR support for Haswell platforms ntb: use errata flag set via DID to implement workaround ntb: conslidate reading of PPD to move platform detection earlier ntb: move platform detection to separate function NTB: debugfs device entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: "Highlights from the I2C subsystem for 3.18: - new drivers for Axxia AM55xx, and Hisilicon hix5hd2 SoC. - designware driver gained AMD support, exynos gained exynos7 support The rest is usual driver stuff. Hopefully no lowlights this time" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Add Device IDs for Intel Sunrise Point PCH i2c: hix5hd2: add i2c controller driver i2c-imx: Disable the clock on probe failure i2c: designware: Add support for AMD I2C controller i2c: designware: Rework probe() to get clock a bit later i2c: designware: Default to fast mode in case of ACPI i2c: axxia: Add I2C driver for AXM55xx i2c: exynos: add support for HSI2C module on Exynos7 i2c: mxs: detect No Slave Ack on SELECT in PIO mode i2c: cros_ec: Remove EC_I2C_FLAG_10BIT i2c: cros-ec-tunnel: Add of match table i2c: rcar: remove sign-compare flaw i2c: ismt: Use minimum descriptor size i2c: imx: Add arbitration lost check i2c: rk3x: Remove unlikely() annotations i2c: rcar: check for no IRQ in rcar_i2c_irq() i2c: rcar: make rcar_i2c_prepare_msg() *void* i2c: rcar: simplify check for last message i2c: designware: add support of platform data to set I2C mode i2c: designware: add support of I2C standard mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Here are a collection of small fixes after 3.18 merge. The urgent one is the fix for kernel panics with linked PCM substream triggered by the recent nonatomic PCM ops support. Other two fixes (emu10k1 and bebob) are stable fixes, and one easy PCI ID addition for a new Intel HD-audio controller" * tag 'sound-fix-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda_intel: Add Device IDs for Intel Sunrise Point PCH ALSA: emu10k1: Fix deadlock in synth voice lookup ALSA: pcm: Fix referred substream in snd_pcm_action_group() unlock loop ALSA: bebob: Fix failure to detect source of clock for Terratec Phase 88
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband/RDMA updates from Roland Dreier: - large set of iSER initiator improvements - hardware driver fixes for cxgb4, mlx5 and ocrdma - small fixes to core midlayer * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (47 commits) RDMA/cxgb4: Fix ntuple calculation for ipv6 and remove duplicate line RDMA/cxgb4: Add missing neigh_release in find_route RDMA/cxgb4: Take IPv6 into account for best_mtu and set_emss RDMA/cxgb4: Make c4iw_wr_log_size_order static IB/core: Fix XRC race condition in ib_uverbs_open_qp IB/core: Clear AH attr variable to prevent garbage data RDMA/ocrdma: Save the bit environment, spare unncessary parenthesis RDMA/ocrdma: The kernel has a perfectly good BIT() macro - use it RDMA/ocrdma: Don't memset() buffers we just allocated with kzalloc() RDMA/ocrdma: Remove a unused-label warning RDMA/ocrdma: Convert kernel VA to PA for mmap in user RDMA/ocrdma: Get vlan tag from ib_qp_attrs RDMA/ocrdma: Add default GID at index 0 IB/mlx5, iser, isert: Add Signature API additions Target/iser: Centralize ib_sig_domain setting IB/iser: Centralize ib_sig_domain settings IB/mlx5: Use extended internal signature layout IB/iser: Set IP_CSUM as default guard type IB/iser: Remove redundant assignment IB/mlx5: Use enumerations for PI copy mask ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull more perf updates from Ingo Molnar: "A second (and last) round of late coming fixes and changes, almost all of them in perf tooling: User visible tooling changes: - Add period data column and make it default in 'perf script' (Jiri Olsa) - Add a visual cue for toggle zeroing of samples in 'perf top' (Taeung Song) - Improve callchains when using libunwind (Namhyung Kim) Tooling fixes and infrastructure changes: - Fix for double free in 'perf stat' when using some specific invalid command line combo (Yasser Shalabi) - Fix off-by-one bugs in map->end handling (Stephane Eranian) - Fix off-by-one bug in maps__find(), also related to map->end handling (Namhyung Kim) - Make struct symbol->end be the first addr after the symbol range, to make it match the convention used for struct map->end. (Arnaldo Carvalho de Melo) - Fix perf_evlist__add_pollfd() error handling in 'perf kvm stat live' (Jiri Olsa) - Fix python test build by moving callchain_param to an object linked into the python binding (Jiri Olsa) - Document sysfs events/ interfaces (Cody P Schafer) - Fix typos in perf/Documentation (Masanari Iida) - Add missing 'struct option' forward declaration (Arnaldo Carvalho de Melo) - Add option to copy events when queuing for sorting across cpu buffers and enable it for 'perf kvm stat live', to avoid having events left in the queue pointing to the ring buffer be rewritten in high volume sessions. (Alexander Yarygin, improving work done by David Ahern): - Do not include a struct hists per perf_evsel, untangling the histogram code from perf_evsel, to pave the way for exporting a minimalistic tools/lib/api/perf/ library usable by tools/perf and initially by the rasd daemon being developed by Borislav Petkov, Robert Richter and Jean Pihet. (Arnaldo Carvalho de Melo) - Make perf_evlist__open(evlist, NULL, NULL), i.e. without cpu and thread maps mean syswide monitoring, reducing the boilerplate for tools that only want system wide mode. (Arnaldo Carvalho de Melo) - Move exit stuff from perf_evsel__delete to perf_evsel__exit, delete should be just a front end for exit + free (Arnaldo Carvalho de Melo) - Add support to new style format of kernel PMU event. (Kan Liang) and other misc fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) perf script: Add period as a default output column perf script: Add period data column perf evsel: No need to drag util/cgroup.h perf evlist: Add missing 'struct option' forward declaration perf evsel: Move exit stuff from __delete to __exit kprobes/x86: Remove stale ARCH_SUPPORTS_KPROBES_ON_FTRACE define perf kvm stat live: Enable events copying perf session: Add option to copy events when queueing perf Documentation: Fix typos in perf/Documentation perf trace: Use thread_{,_set}_priv helpers perf kvm: Use thread_{,_set}_priv helpers perf callchain: Create an address space per thread perf report: Set callchain_param.record_mode for future use perf evlist: Fix for double free in tools/perf stat perf test: Add test case for pmu event new style format perf tools: Add support to new style format of kernel PMU event perf tools: Parse the pmu event prefix and suffix Revert "perf tools: Default to cpu// for events v5" perf Documentation: Remove Ruplicated docs for powerpc cpu specific events perf Documentation: sysfs events/ interfaces ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: "Here we have two bug fixes: 1) The current thread's fault_code is not setup properly upon entry to do_sparc64_fault() in some paths, leading to spurious SIGBUS. 2) Don't use a zero length array at the end of thread_info on sparc64, otherwise end_of_stack() isn't right" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Do not define thread fpregs save area as zero-length array. sparc64: Fix corrupted thread fault code.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "A quick batch of bug fixes: 1) Fix build with IPV6 disabled, from Eric Dumazet. 2) Several more cases of caching SKB data pointers across calls to pskb_may_pull(), thus referencing potentially free'd memory. From Li RongQing. 3) DSA phy code tests operation presence improperly, instead of going: if (x->ops->foo) r = x->ops->foo(args); it was going: if (x->ops->foo(args)) r = x->ops->foo(args); Fix from Andew Lunn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: Net: DSA: Fix checking for get_phy_flags function ipv6: fix a potential use after free in sit.c ipv6: fix a potential use after free in ip6_offload.c ipv4: fix a potential use after free in gre_offload.c tcp: fix build error if IPv6 is not enabled
-
由 Andrew Lunn 提交于
The check for the presence or not of the optional switch function get_phy_flags() called the function, rather than checked to see if it is a NULL pointer. This causes a derefernce of a NULL pointer on all switch chips except the sf2, the only switch to implement this call. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Fixes: 6819563e ("net: dsa: allow switch drivers to specify phy_device::dev_flags") Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2014 3 次提交
-
-
由 David S. Miller 提交于
This breaks the stack end corruption detection facility. What that facility does it write a magic value to "end_of_stack()" and checking to see if it gets overwritten. "end_of_stack()" is "task_thread_info(p) + 1", which for sparc64 is the beginning of the FPU register save area. So once the user uses the FPU, the magic value is overwritten and the debug checks trigger. Fix this by making the size explicit. Due to the size we use for the fpsaved[], gsr[], and xfsr[] arrays we are limited to 7 levels of FPU state saves. So each FPU register set is 256 bytes, allocate 256 * 7 for the fpregs area. Reported-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Every path that ends up at do_sparc64_fault() must install a valid FAULT_CODE_* bitmask in the per-thread fault code byte. Two paths leading to the label winfix_trampoline (which expects the FAULT_CODE_* mask in register %g4) were not doing so: 1) For pre-hypervisor TLB protection violation traps, if we took the 'winfix_trampoline' path we wouldn't have %g4 initialized with the FAULT_CODE_* value yet. Resulting in using the TLB_TAG_ACCESS register address value instead. 2) In the TSB miss path, when we notice that we are going to use a hugepage mapping, but we haven't allocated the hugepage TSB yet, we still have to take the window fixup case into consideration and in that particular path we leave %g4 not setup properly. Errors on this sort were largely invisible previously, but after commit 4ccb9272 ("sparc64: sun4v TLB error power off events") we now have a fault_code mask bit (FAULT_CODE_BAD_RA) that triggers due to this bug. FAULT_CODE_BAD_RA triggers because this bit is set in TLB_TAG_ACCESS (see #1 above) and thus we get seemingly random bus errors triggered for user processes. Fixes: 4ccb9272 ("sparc64: sun4v TLB error power off events") Reported-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
-