- 04 1月, 2017 6 次提交
-
-
由 Jon Paul Maloy 提交于
The socket code currently handles link congestion by either blocking and trying to send again when the congestion has abated, or just returning to the user with -EAGAIN and let him re-try later. This mechanism is prone to starvation, because the wakeup algorithm is non-atomic. During the time the link issues a wakeup signal, until the socket wakes up and re-attempts sending, other senders may have come in between and occupied the free buffer space in the link. This in turn may lead to a socket having to make many send attempts before it is successful. In extremely loaded systems we have observed latency times of several seconds before a low-priority socket is able to send out a message. In this commit, we simplify this mechanism and reduce the risk of the described scenario happening. When a message is attempted sent via a congested link, we now let it be added to the link's backlog queue anyway, thus permitting an oversubscription of one message per source socket. We still create a wakeup item and return an error code, hence instructing the sender to block or stop sending. Only when enough space has been freed up in the link's backlog queue do we issue a wakeup event that allows the sender to continue with the next message, if any. The fact that a socket now can consider a message sent even when the link returns a congestion code means that the sending socket code can be simplified. Also, since this is a good opportunity to get rid of the obsolete 'mtu change' condition in the three socket send functions, we now choose to refactor those functions completely. Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
During multicast reception we currently use a simple linked list with push/pop semantics to store port numbers. We now see a need for a more generic list for storing values of type u32. We therefore make some modifications to this list, while replacing the prefix 'tipc_plist_' with 'u32_'. We also add a couple of new functions which will come to use in the next commits. Acked-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The functions tipc_wait_for_sndpkt() and tipc_wait_for_sndmsg() are very similar. The latter function is also called from two locations, and there will be more in the coming commits, which will all need to test on different conditions. Instead of making yet another duplicates of the function, we now introduce a new macro tipc_wait_for_cond() where the wakeup condition can be stated as an argument to the call. This macro replaces all current and future uses of the two functions, which can now be eliminated. Acked-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sowmini Varadhan says: ==================== TPACKET_V3 TX_RING support This patch series allows an application to use a single PF_PACKET descriptor and leverage the best implementations of TX_RING and RX_RING that exist today. Patch 1 adds the kernel/Documentation changes for TX_RING support and patch2 adds the associated test case in selftests. Changes since v2: additional sanity checks for setsockopt input for TX_RING/TPACKET_V3. Refactored psock_tpacket.c test code to avoid code duplication from V2. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Add a test case and sample code for (TPACKET_V3, PACKET_TX_RING) Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Although TPACKET_V3 Rx has some benefits over TPACKET_V2 Rx, *_v3 does not currently have TX_RING support. As a result an application that wants the best perf for Tx and Rx (e.g. to handle request/response transacations) ends up needing 2 sockets, one with *_v2 for Tx and another with *_v3 for Rx. This patch enables TPACKET_V2 compatible Tx features in TPACKET_V3 so that an application can use a single descriptor to get the benefits of _v3 RX_RING and _v2 TX_RING. An application may do a block-send by first filling up multiple frames in the Tx ring and then triggering a transmit. This patch only support fixed size Tx frames for TPACKET_V3, and requires that tp_next_offset must be zero. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 1月, 2017 34 次提交
-
-
由 Edward Cree 提交于
Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
While working with ipmr, we noticed that it is impossible to determine if an entry is actually unresolved or its IIF interface has disappeared (e.g. virtual interface got deleted). These entries look almost identical to user-space when dumping or receiving notifications. So in order to recognize them add a new RTNH_F_UNRESOLVED flag which is set when sending an unresolved cache entry to user-space. Suggested-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Volodymyr Bendiuga 提交于
Some devices, such as the mv88e6097 do have ADDR[0] external and so it is possible to configure the device to use SMI address 0x1. Remove the restriction, as there are boards using this address. Signed-off-by: NVolodymyr Bendiuga <volodymyr.bendiuga@westermo.se> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'for_4.11/net-next/rds_v3' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux Santosh Shilimkar says: ==================== net: RDS updates v2->v3: - Re-based against latest net-next head. - Dropped a user visible change after discussing with David Miller. It needs some more work to fully support old/new tools matrix. - Addressed Dave's comment about bool usage in patch "RDS: IB: track and log active side..." v1->v2: Re-aligned indentation in patch 'RDS: mark few internal functions..." Series consist of: - RDMA transport fixes for map failure, listen sequence, handler panic and composite message notification. - Couple of sparse fixes. - Message logging improvements for bind failure, use once mr semantics and connection remote address, active end point. - Performance improvement for RDMA transport by reducing the post send pressure on the queue and spreading the CQ vectors. - Useful statistics for socket send/recv usage and receive cache usage. - Additional RDS CMSG used by application to track the RDS message stages for certain type of traffic to find out latency spots. Can be enabled/disabled per socket. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Shilimkar 提交于
Socket option to tap receive path latency in various stages in nano seconds. It can be enabled on selective sockets using using SO_RDS_MSG_RXPATH_LATENCY socket option. RDS will return the data to application with RDS_CMSG_RXPATH_LATENCY in defined format. Scope is left to add more trace points for future without need of change in the interface. Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Avinash Repaka 提交于
RDS support max message size as 1M but the code doesn't check this in all cases. Patch fixes it for RDMA & non-RDMA and RDS MR size and its enforced irrespective of underlying transport. Signed-off-by: NAvinash Repaka <avinash.repaka@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Venkat Venkatsubra 提交于
Tracks the receive side memory added to scokets and removed from sockets. Signed-off-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Shutdown code reaping loop takes care of emptying the CQ's before they being destroyed. And once tasklets are killed, the hanlders are not expected to run. But because of core tasklet code issues, tasklet handler could still run even after tasklet_kill, RDS IB shutdown code already reaps the CQs before freeing cq/qp resources so as such the handlers have nothing left to do post shutdown. On other hand any handler running after teardown and trying to access already freed qp/cq resources causes issues Patch fixes this race by makes sure that handlers returns without any action post teardown. Reviewed-by: NWengang <wen.gang.wang@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
When application sends an RDS RDMA composite message consist of RDMA transfer to be followed up by non RDMA payload, it expect to be notified *only* when the full message gets delivered. RDS RDMA notification doesn't behave this way though. Thanks to Venkat for debug and root casuing the issue where only first part of the message(RDMA) was successfully delivered but remainder payload delivery failed. In that case, application should not be notified with a false positive of message delivery success. Fix this case by making sure the user gets notified only after the full message delivery. Reviewed-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Based on available device vectors, allocate cqs accordingly to get better spread of completion vectors which helps performace great deal.. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Tracks the ib receive cache total, incoming and frag allocations. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Useful to know the active and passive end points in a RDS IB connection. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
In absence of extension headers, message log will keep flooding the console. As such even without use_once we can clean up the MRs so its not really an error case message so make it debug message Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
MR invalidation in RDS is done in background thread and not in data path like registration. So break the dependency between them which helps to remove the performance bottleneck. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
The first message to a remote node should prompt a new connection even if it is RDMA operation. For RDMA operation the MR mapping can fail because connections is not yet up. Since the connection establishment is asynchronous, we make sure the map failure because of unavailable connection reach to the user by appropriate error code. Before returning to the user, lets trigger the connection so that its ready for the next retry. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Qing Huang 提交于
This prevents RDS from handling incoming rdma packets before RDS completes initializing its recv/send components. Signed-off-by: NQing Huang <qing.huang@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Fixes warning: Using plain integer as NULL pointer Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Transport retry is not much useful since it indicate packet loss in fabric so its better to failover fast rather than longer retry. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Also use pr_* for it. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Fixes below warnings: warning: symbol 'rds_send_probe' was not declared. Should it be static? warning: symbol 'rds_send_ping' was not declared. Should it be static? warning: symbol 'rds_tcp_accept_one_path' was not declared. Should it be static? warning: symbol 'rds_walk_conn_path_info' was not declared. Should it be static? Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
It's useful to know the IP address when RDS fails to bind a connection. Thus, adding it to the error message. Orabug: 21894138 Reviewed-by: NWei Lin Guay <wei.lin.guay@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. The previous implementation of set_settings was modifying the value of speed and duplex, but with the new API, it's not possible. The structure ethtool_link_ksettings is defined as const. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
There is a function in mdio for the old ethtool api gset. We add a new function mdio45_ethtool_ksettings_get for the new ethtool api glinksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Saeed Mahameed says: ==================== Mellanox mlx5 core and ODP updates 2017-01-01 The following eleven patches mainly come from Artemy Kovalyov who expanded mlx5 on-demand-paging (ODP) support. In addition there are three cleanup patches which don't change any functionality, but are needed to align codebase prior accepting other patches. Memory region (MR) in IB can be huge and ODP (on-demand paging) technique allows to use unpinned memory, which can be consumed and released on demand. This allows to applications do not pin down the underlying physical pages of the address space, and save from them need to track the validity of the mappings. Rather, the HCA requests the latest translations from the OS when pages are not present, and the OS invalidates translations which are no longer valid due to either non-present pages or mapping changes. In existing ODP implementation applications is needed to register memory buffers for communication, though registered memory regions need not have valid mappings at registration time. This patch set performs the following steps to expand current ODP implementation: 1. It refactors UMR to support large regions, by introducing generic function to perform HCA translation table modifications. This function supports both atomic and process contexts and is not limited by number of modified entries. This function allows to enable reallocated memory regions of arbitrary size, so adding MR cache buckets to support up to 16GB MRs. 2. It changes page fault event format and refactor page faults logic together with addition of atomic support. 3. It prepares mlx5 core code to support implicit registration with simplified and relaxed semantics. Implicit ODP semantics allows to applications provide special memory key that represents their complete address space. Thus all IO accesses referencing to this key (with proper access rights associated with the key) wouldn't need not register any virtual address range. Thanks, Artemy, Ilya and Leon v1->v2: - Don't use 'inline' in .c files ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-