- clean up the ugliness in may_umount_tree()

 - fix a bug in do_loopback().  after cloning a tree, do_loopback()
   unlinks only the topmost mount of the cloned tree, leaving behind the
   children mounts on their corresponding expiry list.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

umount is done under the protection of the namespace semaphore.  This
can lead to intresting deadlocks when the last reference to a mount is
released, if filesystem code is in sufficiently nasty state.

This collects all the to-be-released-mounts and releases them after
releasing the namespace semaphore.  That both reduces the time we are
holding namespace semaphore and gets the things more robust.

Idea proposed by Al Viro.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Old semantics: graft_tree() grabs a reference on the vfsmount before
returning success.

New one: graft_tree() leaves that to caller.

All the callers of graft_tree() immediately dropped that reference
anyway.  Changing the interface takes care of this unnecessary overhead.

Idea proposed by Al Viro.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow caller of seq_open() to kmalloc() seq_file + whatever else they
want and set ->private_data to it.  seq_open() will then abstain from
doing allocation itself.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 - check_mnt() on the source of binding should've been unconditional
   from the very beginning.  My fault - as far I could've trace it,
   that's an old thinko made back in 2001.  Kudos to Miklos for spotting
   it...

   Fixed.

 - code cleaned up.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The way we currently deal with quota and process accounting that might
keep vfsmount busy at umount time is inherently broken; we try to turn
them off just in case (not quite correctly, at that) and

  a) pray umount doesn't fail (otherwise they'll stay turned off)
  b) pray nobody doesn anything funny just as we turn quota off

Moreover, LSM provides hooks for doing the same sort of broken logics.

The proper way to deal with that is to introduce the second kind of
reference to vfsmount.  Semantics:

 - when the last normal reference is dropped, all special ones are
   converted to normal ones and if there had been any, cleanup is done.
 - normal reference can be cloned into a special one
 - special reference can be converted to normal one; that's a no-op if
   we'd already passed the point of no return (i.e.  mntput() had
   converted special references to normal and started cleanup).

The way it works: e.g. starting process accounting converts the vfsmount
reference pinned by the opened file into special one and turns it back
to normal when it gets shut down; acct_auto_close() is done when no
normal references are left.  That way it does *not* obstruct umount(2)
and it silently gets turned off when the last normal reference to
vfsmount is gone.  Which is exactly what we want...

The same should be done by LSM module that holds some internal
references to vfsmount and wants to shut them down on umount - it should
make them special and security_sb_umount_close() will be called exactly
when the last normal reference to vfsmount is gone.

quota handling is even simpler - we don't use normal file IO anymore, so
there's no need to hold vfsmounts at all.  DQUOT_OFF() is done from
deactivate_super(), where it really belongs.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch puts into place the final piece of the puzzle for SMP
support on ARM.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Uli Luckas

This is a simplification of patch 3116/1 as sugested by Russell King.
Signed-off-by: NUli Luckas <u.luckas@road-gmbh.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Since we have to use XCB=101 instead of XCB=000 on the ixp2400 to
prevent it from regularly falling over, and since we have to deal with
manual write buffer flushing because of that, we might as well use
XCB=101 on all ixp2000 platforms since it's faster than XCB=000.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

nwfpe extended precision emulation used to be broken on big-endian
and was therefore disabled.  This patch fixes nwfpe so that it copies
extended precision floats to/from userspace in the proper word order
(similar to patch #2046, see the description of that patch for an
explanation) and reenables the Kconfig option.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The routine that nwfpe uses for converting floats/doubles to
extended precision fails to zero two bytes of kernel stack.  This
is not immediately obvious, as the floatx80 structure has 16 bits
of implicit padding (by design.)  These two bytes are copied to
userspace when an stfe is emulated, causing a possible info leak.

Make the padding explicit and zero it out in the relevant places.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add SMP support for the MPcore tile fitted to the Realview ARM
platform.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add uniprocessor support for Realview platform fitted with the
MPcore (SMP) tile.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Some manual fixups for clashing kfree() cleanups etc.

Second cut of the VINO / Indycam driver for the Silicon Graphics Indy,
much more feature complete and bug free.

    
Add missing bits to fix D-cache aliasing problem in the PIO IDE driver.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This reverts 8f91ed6c.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Since 2.6.13-rc1 setup_frame and its variants return int.  But some bits
were missed in the conversion.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
If HZ was 1000, mdelay(2) cause overflow on multiplication in
__udelay.  We should define MAX_UDELAY_MS properly to prevent this.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Many RTC routines were not protected against each other, so there are
potential races, for example, ntp-update against /dev/rtc.  This patch
fixes them using rtc_lock.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
The mips_rtc_lock is no longer needed because RTC operations should be
protected already by other mechanism. (rtc_lock, local_irq_save, etc.)
    
Also, locking whole rtc_get_time/rtc_set_time should be avoided while
some RTC routines might take very long time (a few seconds).
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
 o Switch to dynamic major
 o Remove duplicate SHN_MIPS_SCOMMON definition
 o Coding style: remove typedefs.
 o Coding style: reorder to avoid the need for forward declarations
 o Use kzalloc.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
"extern inline" doesn't make much sense.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Only a cosmetic fix to make the output of modinfo look readable.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
 o Coding style
 o Race condition on open
 o Switch to dynamic major
 o Header file cleanup
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>