- 15 4月, 2006 26 次提交
-
-
由 David Brownell 提交于
Fill OUT buffers with 0x55 before RX, so that controller driver bugs that mangle data can be more readily detected during testing. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This catches up to a change in the Kconfig support for highspeed modes; the change predated 2.6.10, and anyone using gadgetfs on a highspeed device would see the kernel wrongly reject the alternate descriptors. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This adds a "avoid proprietary protocols" warnoff, identifying several of the known deficiencies in Microsoft's excuse-for-specification, and fixes some whitespace bugs. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Some patch broke short-OUT packet handling for net2280, making it report illegal status values. This updates the status code so it's correct. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
I submitted the wrong version of the patch teaching about the driver for Mentor's Highspeed Dual Role Controller (HDRC), whoops! This uses the right name for that driver. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
USB OTG devices are not required to support external hubs. This adds a configuration option to disable that support. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
this patch fix leak of memory allocated to intr if allocation of sc->urb_int fails. Found by the Coverity checker. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
this patch fix potential null pointer dereference. Found by the Coverity checker. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
- increase ack timeout for slow system (geode 233MHz where HZ=100) - reset the cmv ack flag when rebooting Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
- improve debug trace in order to make easy to solve user problems. - indent some code - increase version number Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch removes the following unused EXPORT_SYMBOL's: - hub.c: usb_set_device_state - usb.c: usb_alloc_dev - usb.c: usb_disconnect Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Petko Manolov 提交于
Attached is a patch that fixes nasty bug, which i am afraid was there for a long time. It was spotted by Andre Draszik <kernel@andred.net>. From: Petko Manolov <petkan@nucleusys.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ping Cheng 提交于
This patch adds support for DTF 521, Intuos3 12x12 and 12x19 Signed-off-by: NPing Cheng <pingc@wacom.com> Acked-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ping Cheng 提交于
This patch adds support for DTF 521, Intuos3 12x12, and 12x19; fixes minor data report bugs. Signed-off-by: NPing Cheng <pingc@wacom.com> Acked-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Randy Dunlap pointed out that there now is a module_param_array_named macro available. This patch (as666) updates g_file_storage to make use of it. It also adds a comment listing the specifications documents used in the design of the driver's SCSI operation (at Pat LaVarre's request). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ritz 提交于
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ritz 提交于
A new single driver for various USB touchscreen devices. It currently supports: - eGalax TouchKit - PanJit TouchSet - 3M/Microtouch - ITM Touchscreens Support for the diffent devices can be enabled/disable when CONFIG_EMBEDDED is set. Sizes for comparision: text data bss dec hex filename 2942 724 4 3670 e56 touchkitusb.ko 2647 660 0 3307 ceb mtouchusb.ko 2448 628 0 3076 c04 itmtouch.ko 4145 1012 12 5169 1431 usbtouchscreen.ko Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Folkert van Heusden 提交于
This patch adds support for new vendor (papouch) and one of their devices - TMU (a USB thermometer). More information: vendor homepage: http://www.papouch.com/en/ product homepage (Polish): http://www.papouch.com/shop/scripts/_detail.asp?katcislo=0188 This patch is based on the submission from Folkert van Heusden [1]. Then reviseted by Kalin KOZHUHAROV [2] and retested by Folkert. [1] http://article.gmane.org/gmane.linux.kernel/392970 [2] http://article.gmane.org/gmane.linux.kernel/393386Signed-off-by: NFolkert van Heusden <folkert@vanheusden.com> Signed-off-by: NKalin KOZHUHAROV <kalin@thinrope.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch adds proper prototypes in a header file for some global functions. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch adds a header file with proper prototypes for two functions in drivers/usb/host/pci-quirks.c. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Luiz Fernando Capitulino 提交于
The usbserial's port semaphore used to synchronize serial_open() and serial_close() are strict mutexes, convert them to the mutex implementation. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as664) adds a comment to file_storage.c, noting that the driver is slightly non-portable because it assumes that a buffer allocated for a bulk-in endpoint will also be useable for a bulk-out endpoint. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
I'm told that some UDC hardware may work better if it knows that receiving a short packet should always cause an error. Accordingly, this patch (as663) sets the short_not_ok flag for bulk-out transfers in g_file_storage. Oddly enough, there are no circumstances where that driver can legally receive a shorter-than-expected bulk-out packet. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
This patch adds support for the Eclo COM to 1-Wire USB adapter <http://www.eclo.pt/products_ibutton_adapters_usb01_en.asp> to the ftdi_sio driver's device ID table. Details were provided by Martin Grill on the ftdi-sio-usb-devel mailing list and I (Ian Abbott) confirmed it matched the INF file in the Eclo's Windows driver package. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ben Dooks 提交于
Fix compile errors due to functions not being defined static Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Guennadi Liakhovetski 提交于
Below is a patch to gadgets/net2280.[ch] which adds support for the net2282 controller. The original code was kindly provided by PLX Technology, I just merged it with the current net2280 driver in the kernel. Tested on 2.6.15.6, but only with 2282. I did the merge, so that the behaviour for the 2280 is unaffected (except for short delays for extra checks). Signed-off-by: NG. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Support for net2282 in net2280 driver.
-
- 11 4月, 2006 1 次提交
-
-
由 Matthias Urlichs 提交于
Since the arrays are declared as in_urbs[N_IN_URB] and out_urbs[N_OUT_URB], both for loops go one over the end of the array. This fixes coverity id #555. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de> Signed-Off-By: NLinus Torvalds <torvalds@osdl.org>
-
- 31 3月, 2006 7 次提交
-
-
由 Dominik Brodowski 提交于
Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Convert the remaining drivers which use pcmcia_release_io or pcmcia_release_irq, and remove the EXPORT of these symbols. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 29 3月, 2006 2 次提交
-
-
由 Alexey Dobriyan 提交于
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
Mark the f_ops members of inodes as const, as well as fix the ripple-through this causes by places that copy this f_ops and then "do stuff" with it. Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 3月, 2006 3 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Alan Stern 提交于
The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jean Tourrilhes 提交于
The "dev->get_wireless_stats" field is deprecated and slowly be surely going away. Most drivers have been updated months ago. Actually, there is an annoying message for driver still using it, but it seems that user of zd1201 were not annoyed enough ;-) Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 3月, 2006 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Because of historic reasons, there are two separate directories with V4L stuff. Most drivers are located at driver/media/video. However, some code for USB Webcams were inserted under drivers/usb/media. This makes difficult for module authors to know were things should be. Also, makes Kconfig menu confusing for normal users. This patch moves all V4L content under drivers/usb/media to drivers/media/video, and fixes Kconfig/Makefile entries. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-