Now that all platforms using dma_direct_offset setup the
archdata.dma_data correctly, we can change the dma_direct_ops to
retrieve the offset from the dma_data, rather than directly from the
global.

While we're here, change the way the offset is used - instead of
or'ing it into the value, add it.  This should have no effect on
current implementations where the offset is far larger than memory,
however in future we may want to use smaller offsets.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Celleb always uses dma_direct_ops, and sets dma_direct_offset, so it
too should set dma_data to dma_direct_offset.

Currently there's no pci_dma_dev_setup() routine for Celleb so add one.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Store the direct_dma_offset in each device's dma_data in the case
where we're using the direct DMA ops.

We need to make sure we setup the ppc_md.pci_dma_dev_setup() callback
if we're using a non-zero offset.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We must always hookup the pci_bus resource 0 to the PHB io_resource
even if the latter is empty (the bus has no IO support).  Otherwise,
some other code will end up hooking it up to something bogus and the
resource tree will end up being broken.

This fixes boot on QS20 Cell blades where the IDE driver failed to
allocate the IO resources due to breakage of the resource tree.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Update ps3_defconfig.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove the PS3 workaround needed to support sparsemem SPU mappings.
The SPU mappings no longer use sparsemem, so this workaround is no
longer needed.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A general housekeeping change of the PS3 vuart variable
vuart_bus_priv.probe_mutex from semaphore to mutex.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add PS3 logical performance monitor (lpm) device driver.

The PS3's LV1 hypervisor provides a Logical Performance Monitor that
abstracts the Cell processor's performance monitor features for use
by guest operating systems.
Signed-off-by: NTakashi Yamamoto <TakashiA.Yamamoto@jp.sony.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add PS3 logical performance monitor device support to the
PS3 system-bus and platform device registration routines.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add repository routines for the PS3 Logical Performance Monitor.
Signed-off-by: NTakashi Yamamoto <TakashiA.Yamamoto@jp.sony.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Cleanup coding errors in arch/powerpc/platforms/ps3/repository.c as
reported by sparse and checkpatch.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Cleanup coding errors in drivers/ps3/ps3-vuart.c as reported by
checkpatch.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Cleanup coding errors in drivers/ps3/ps3-sys-manager.c as reported
by checkpatch.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

PS3: Refactor ps3_repository_find_device() to use the existing
ps3_repository_read_bus_id() routine.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

PS3: Kill unused routine ps3_repository_bump_device().
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

PS3: Add repository polling loop to work around timing bug

On some firmware versions (e.g. 1.90), the storage device may not show up
in the repository immediately after receiving the notification message.
Add a small polling loop to make sure we don't miss it.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The PS3 hypervisor has a storage device notification mechanism to wait
until a storage device is ready.  Unfortunately the storage device
probing code used this mechanism in an incorrect way, needing a
polling loop and handling of devices that are not yet ready.

This change corrects this by:
  - First waiting for the reception of an asynchronous notification
    that a new storage device became ready,
  - Then looking up the storage device in the device repository.

On shutdown, the storage probe thread is stopped and the storage
notification device is closed using a reboot notifier.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The storage probe feature of the PS3 hypervisor returns device IDs.  Add
the corresponding repository routine ps3_repository_find_device_by_id()
which can be used to retrieve the device info from the repository.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Change the PS3 bus_id and dev_id from type unsigned int to u64.  These
IDs are 64-bit in the repository, and the special storage notification
device has a device ID of ULONG_MAX.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a definition for the Cell bookmark SPR to asm-powerpc/regs.h.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds hooks into the default_machine_crash_shutdown so drivers can
register a function to be run in the first kernel before we hand off
to the second kernel.  This should only be used in exceptional
circumstances, like where the device can't be reset in the second
kernel alone (as is the case with eHEA).  To emphasize this, the
number of handles allowed to be registered is currently #def to 1.

This uses the setjmp/longjmp code around the call out to the
registered hooks, so any bogus exceptions we encounter will hopefully
be recoverable.

Tested with bogus data and instruction exceptions.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This makes the setjmp/longjmp code used by xmon, generically available
to other code.  It also removes the requirement for debugger hooks to
be only called on 0x300 (data storage) exception.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Export copy_page() on 32-bit powerpc; unionfs needs it.

Unionfs already builds as a module on 64bit powerpc, so the export is
placed within an existing CONFIG_PPC32 #ifdef.
Signed-off-by: NJoseph Fannin <jfannin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

smp_send_stop() will send an IPI to all other cpus to shut them down.
However, for the case of xmon-based reboots (as well as potentially some
panics), the other cpus are (or might be) spinning with interrupts off,
and won't take the IPI.

Current code will drop us into the debugger when the IPI fails, which
means we're in an infinite loop that we can't get out of without an
external reset of some sort.

Instead, make the smp_send_stop() IPI call path just print the warning
about being unable to send IPIs, but make it return so the rest of the
shutdown sequence can continue. It's not perfect, but the lesser of
two evils.

Also move the call_lock handling outside of smp_call_function_map so we
can avoid deadlocks in smp_send_stop().
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

smp_call_function_map should be static, and for consistency prepend it
with __ like other local helper functions in the same file.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25

Signed-off-by: NJon Loeliger <jdl@freescale.com>
Acked-by: NAndy Wilcox <andy@protium.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Use cuImage bootwrapper until U-Boot port is completed.
Derived heavily from Linkstation port.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Acked-by: NAndy Wilcox <andy@protium.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Based on the Kurobox DTS files.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Acked-by: NAndy Wilcox <andy@protium.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Prevents miscellaneous users from declaring it locally.
Signed-off-by: NJon Loeliger <jdl@freecale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds support to use the fixed-link property of an ethernet node
to fs_enet for the CONFIG_PPC_CPM_NEW_BINDING case.
Signed-off-by: NJochen Friedrich <jochen@scram.de>
Acked-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NVitali Bordug <vitb@kernel.crashing.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

cpmux is need in all cases, having wrapped by the ifndef CONFIG_STX_GP3
was causing a compile error.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Do just enough to move the RapidIO support code for 85xx over from arch/ppc
into arch/powerpc and make it still build.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

drivers/rapidio/rio.c: In function 'rio_get_asm':
drivers/rapidio/rio.c:413: error: implicit declaration of function 'in_interrupt'
drivers/rapidio/rio.c: In function 'rio_init_mports':
drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t'
drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t'
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Call of_platform_bus_probe() on the MPC8641 HPCN, similar to what is
done for other platforms.
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts

Also add compatible field for the soc node, so that it will be picked up
by of_platform_bus_probe().
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>