commit 909c3a22 (Btrfs: fix loading of orphan roots leading to BUG_ON)
avoids the BUG_ON but can add an aliased root to the dead_roots list or
leak the root.

Since we've already been loading roots into the radix tree, we should
use it before looking the root up on disk.

Cc: <stable@vger.kernel.org> # 4.5
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

We need to call free_extent_map() on the em we look up.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

At the end of unmount/dev-delete, if the device exclusive open is not
actually closed, then there might be a race with another program in
the userland who is trying to open the device in exclusive mode and
it may fail for eg:
      unmount /btrfs; fsck /dev/x
      btrfs dev del /dev/x /btrfs; fsck /dev/x
so here background blkdev_put() is not a choice
Signed-off-by: NAnand Jain <Anand.Jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Function start_transaction() can return ERR_PTR(1) when flush is
BTRFS_RESERVE_FLUSH_LIMIT, so the call graph is

start_transaction (return ERR_PTR(1))
  -> btrfs_block_rsv_add (return 1)
     -> reserve_metadata_bytes (return 1)
        -> flush_space (return 1)
           -> do_chunk_alloc  (return 1)

With BTRFS_RESERVE_FLUSH_LIMIT, if flush_space is already on the
flush_state of ALLOC_CHUNK and it successfully allocates a new
chunk, then instead of trying to reserve space again,
reserve_metadata_bytes returns 1 immediately.

Eventually the callers who call start_transaction() usually just
do the IS_ERR() check which ERR_PTR(1) can pass, then it'll get
a panic when dereferencing a pointer which is ERR_PTR(1).

The following patch fixes the above problem.
"btrfs: flush_space: treat return value of do_chunk_alloc properly"
https://patchwork.kernel.org/patch/7778651/

This add comments to clarify do_chunk_alloc()'s return value.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

When running fstests generic/068, sometimes we got below deadlock:
  xfs_io          D ffff8800331dbb20     0  6697   6693 0x00000080
  ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000
  ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001
  ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8
  Call Trace:
  [<ffffffff816a9045>] schedule+0x35/0x80
  [<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140
  [<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100
  [<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30
  [<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs]
  [<ffffffff810d32b5>] percpu_down_read+0x35/0x50
  [<ffffffff81217dfc>] __sb_start_write+0x2c/0x40
  [<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs]
  [<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs]
  [<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs]
  [<ffffffff81230a1a>] evict+0xba/0x1a0
  [<ffffffff812316b6>] iput+0x196/0x200
  [<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs]
  [<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs]
  [<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs]
  [<ffffffff81218040>] freeze_super+0xf0/0x190
  [<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0
  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
  [<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140
  [<ffffffff81229409>] SyS_ioctl+0x79/0x90
  [<ffffffff81003c12>] do_syscall_64+0x62/0x110
  [<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25

>From this warning, freeze_super() already holds SB_FREEZE_FS, but
btrfs_freeze() will call btrfs_commit_transaction() again, if
btrfs_commit_transaction() finds that it has delayed iputs to handle,
it'll start_transaction(), which will try to get SB_FREEZE_FS lock
again, then deadlock occurs.

The root cause is that in btrfs, sync_filesystem(sb) does not make
sure all metadata is updated. There still maybe some codes adding
delayed iputs, see below sample race window:

         CPU1                                  |         CPU2
|-> freeze_super()                             |
    |-> sync_filesystem(sb);                   |
    |                                          |-> cleaner_kthread()
    |                                          |   |-> btrfs_delete_unused_bgs()
    |                                          |       |-> btrfs_remove_chunk()
    |                                          |           |-> btrfs_remove_block_group()
    |                                          |               |-> btrfs_add_delayed_iput()
    |                                          |
    |-> sb->s_writers.frozen = SB_FREEZE_FS;   |
    |-> sb_wait_write(sb, SB_FREEZE_FS);       |
    |   acquire SB_FREEZE_FS lock.             |
    |                                          |
    |-> btrfs_freeze()                         |
        |-> btrfs_commit_transaction()         |
            |-> btrfs_run_delayed_iputs()      |
            |   will handle delayed iputs,     |
            |   that means start_transaction() |
            |   will be called, which will try |
            |   to get SB_FREEZE_FS lock.      |

To fix this issue, introduce a "int fs_frozen" to record internally whether
fs has been frozen. If fs has been frozen, we can not handle delayed iputs.
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ add comment to btrfs_freeze ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch can fix some false ENOSPC errors, below test script can
reproduce one false ENOSPC error:
	#!/bin/bash
	dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128
	dev=$(losetup --show -f fs.img)
	mkfs.btrfs -f -M $dev
	mkdir /tmp/mntpoint
	mount $dev /tmp/mntpoint
	cd /tmp/mntpoint
	xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile

Above script will fail for ENOSPC reason, but indeed fs still has free
space to satisfy this request. Please see call graph:
btrfs_fallocate()
|-> btrfs_alloc_data_chunk_ondemand()
|   bytes_may_use += 64M
|-> btrfs_prealloc_file_range()
    |-> btrfs_reserve_extent()
        |-> btrfs_add_reserved_bytes()
        |   alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not
        |   change bytes_may_use, and bytes_reserved += 64M. Now
        |   bytes_may_use + bytes_reserved == 128M, which is greater
        |   than btrfs_space_info's total_bytes, false enospc occurs.
        |   Note, the bytes_may_use decrease operation will be done in
        |   end of btrfs_fallocate(), which is too late.

Here is another simple case for buffered write:
                    CPU 1              |              CPU 2
                                       |
|-> cow_file_range()                   |-> __btrfs_buffered_write()
    |-> btrfs_reserve_extent()         |   |
    |                                  |   |
    |                                  |   |
    |    .....                         |   |-> btrfs_check_data_free_space()
    |                                  |
    |                                  |
    |-> extent_clear_unlock_delalloc() |

In CPU 1, btrfs_reserve_extent()->find_free_extent()->
btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease
operation will be delayed to be done in extent_clear_unlock_delalloc().
Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's
btrfs_check_data_free_space() tries to reserve 100MB data space.
If
	100MB > data_sinfo->total_bytes - data_sinfo->bytes_used -
		data_sinfo->bytes_reserved - data_sinfo->bytes_pinned -
		data_sinfo->bytes_readonly - data_sinfo->bytes_may_use
btrfs_check_data_free_space() will try to allcate new data chunk or call
btrfs_start_delalloc_roots(), or commit current transaction in order to
reserve some free space, obviously a lot of work. But indeed it's not
necessary as long as decreasing bytes_may_use timely, we still have
free space, decreasing 128M from bytes_may_use.

To fix this issue, this patch chooses to update bytes_may_use for both
data and metadata in btrfs_add_reserved_bytes(). For compress path, real
extent length may not be equal to file content length, so introduce a
ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and
btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by
file content length. Then compress path can update bytes_may_use
correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC
and RESERVE_FREE.

As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In
run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as
PREALLOC, we also need to update bytes_may_use, but can not pass
EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so
here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook()
to update btrfs_space_info's bytes_may_use.

Meanwhile __btrfs_prealloc_file_range() will call
btrfs_free_reserved_data_space() internally for both sucessful and failed
path, btrfs_prealloc_file_range()'s callers does not need to call
btrfs_free_reserved_data_space() any more.
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch divides btrfs_update_reserved_bytes() into
btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), and
next patch will extend btrfs_add_reserved_bytes（）to fix some
false ENOSPC error, please see later patch for detailed info.
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

In prealloc_file_extent_cluster(), btrfs_check_data_free_space() uses
wrong file offset for reloc_inode, it uses cluster->start and cluster->end,
which indeed are extent's bytenr. The correct value should be
cluster->[start|end] minus block group's start bytenr.

start bytenr   cluster->start
|              |     extent      |   extent   | ...| extent |
|----------------------------------------------------------------|
|                block group reloc_inode                         |
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

When doing log replay at mount time(after power loss), qgroup will leak
numbers of replayed data extents.

The cause is almost the same of balance.
So fix it by manually informing qgroup for owner changed extents.

The bug can be detected by btrfs/119 test case.

Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch fixes a REGRESSION introduced in 4.2, caused by the big quota
rework.

When balancing data extents, qgroup will leak all its numbers for
relocated data extents.

The relocation is done in the following steps for data extents:
1) Create data reloc tree and inode
2) Copy all data extents to data reloc tree
   And commit transaction
3) Create tree reloc tree(special snapshot) for any related subvolumes
4) Replace file extent in tree reloc tree with new extents in data reloc
   tree
   And commit transaction
5) Merge tree reloc tree with original fs, by swapping tree blocks

For 1)~4), since tree reloc tree and data reloc tree doesn't count to
qgroup, everything is OK.

But for 5), the swapping of tree blocks will only info qgroup to track
metadata extents.

If metadata extents contain file extents, qgroup number for file extents
will get lost, leading to corrupted qgroup accounting.

The fix is, before commit transaction of step 5), manually info qgroup to
track all file extents in data reloc tree.
Since at commit transaction time, the tree swapping is done, and qgroup
will account these data extents correctly.

Cc: Mark Fasheh <mfasheh@suse.de>
Reported-by: NMark Fasheh <mfasheh@suse.de>
Reported-by: NFilipe Manana <fdmanana@gmail.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Refactor btrfs_qgroup_insert_dirty_extent() function, to two functions:
1. btrfs_qgroup_insert_dirty_extent_nolock()
   Almost the same with original code.
   For delayed_ref usage, which has delayed refs locked.

   Change the return value type to int, since caller never needs the
   pointer, but only needs to know if they need to free the allocated
   memory.

2. btrfs_qgroup_insert_dirty_extent()
   The more encapsulated version.

   Will do the delayed_refs lock, memory allocation, quota enabled check
   and other things.

The original design is to keep exported functions to minimal, but since
more btrfs hacks exposed, like replacing path in balance, we need to
record dirty extents manually, so we have to add such functions.

Also, add comment for both functions, to info developers how to keep
qgroup correct when doing hacks.

Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

We wait on qgroup rescan completion in three places: file system
shutdown, the quota disable ioctl, and the rescan wait ioctl.  If the
user sends a signal while we're waiting, we continue happily along.  This
is expected behavior for the rescan wait ioctl.  It's racy in the shutdown
path but mostly works due to other unrelated synchronization points.
In the quota disable path, it Oopses the kernel pretty much immediately.

Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

The qgroup_flags field is overloaded such that it reflects the on-disk
status of qgroups and the runtime state.  The BTRFS_QGROUP_STATUS_FLAG_RESCAN
flag is used to indicate that a rescan operation is in progress, but if
the file system is unmounted while a rescan is running, the rescan
operation is paused.  If the file system is then mounted read-only,
the flag will still be present but the rescan operation will not have
been resumed.  When we go to umount, btrfs_qgroup_wait_for_completion
will see the flag and interpret it to mean that the rescan worker is
still running and will wait for a completion that will never come.

This patch uses a separate flag to indicate when the worker is
running.  The locking and state surrounding the qgroup rescan worker
needs a lot of attention beyond this patch but this is enough to
avoid a hung umount.

Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by; Jeff Mahoney <jeffm@suse.com>
Reviewed-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

do_chunk_alloc returns 1 when it succeeds to allocate a new chunk.
But flush_space will not convert this to 0, and will also return 1.
As a result, reserve_metadata_bytes will think that flush_space failed,
and may potentially return this value "1" to the caller (depends how
reserve_metadata_bytes was called). The caller will also treat this as an error.
For example, btrfs_block_rsv_refill does:

int ret = -ENOSPC;
...
ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
if (!ret) {
        block_rsv_add_bytes(block_rsv, num_bytes, 0);
        return 0;
}

return ret;

So it will return -ENOSPC.
Signed-off-by: NAlex Lyakas <alex@zadarastorage.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

This adds several ASSERT()' s to report memory leak of block group cache.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

When over 1000 file extents refers to one extent, find_parent_nodes()
will be obviously slow, due to the O(n^2)~O(n^3) loops inside
__merge_refs().

The following ftrace shows the cubic growth of execution time:

256 refs
 5) + 91.768 us   |  __add_keyed_refs.isra.12 [btrfs]();
 5)   1.447 us    |  __add_missing_keys.isra.13 [btrfs]();
 5) ! 114.544 us  |  __merge_refs [btrfs]();
 5) ! 136.399 us  |  __merge_refs [btrfs]();

512 refs
 6) ! 279.859 us  |  __add_keyed_refs.isra.12 [btrfs]();
 6)   3.164 us    |  __add_missing_keys.isra.13 [btrfs]();
 6) ! 442.498 us  |  __merge_refs [btrfs]();
 6) # 2091.073 us |  __merge_refs [btrfs]();

and 1024 refs
 7) ! 368.683 us  |  __add_keyed_refs.isra.12 [btrfs]();
 7)   4.810 us    |  __add_missing_keys.isra.13 [btrfs]();
 7) # 2043.428 us |  __merge_refs [btrfs]();
 7) * 18964.23 us |  __merge_refs [btrfs]();

And sort them into the following char:
(Unit: us)
------------------------------------------------------------------------
 Trace function        | 256 ref        | 512 refs      | 1024 refs    |
------------------------------------------------------------------------
 __add_keyed_refs      | 91             | 249           | 368          |
 __add_missing_keys    | 1              | 3             | 4            |
 __merge_refs 1st call | 114            | 442           | 2043         |
 __merge_refs 2nd call | 136            | 2091          | 18964        |
------------------------------------------------------------------------

We can see the that __add_keyed_refs() grows almost in linear behavior.
And __add_missing_keys() in this case doesn't change much or takes much
time.

While for the 1st __merge_refs() it's square growth
for the 2nd __merge_refs() call it's cubic growth.

It's no doubt that merge_refs() will take a long long time to execute if
the number of refs continues its grows.

So add a cond_resced() into the loop of __merge_refs().

Although this will solve the problem of soft lockup, we need to use the
new rb_tree based structure introduced by Lu Fengqi to really solve the
long execution time.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

When some critical errors occur and FS would be flipped into RO,
if we have an on-going balance, we can end up with a memory leak
of root->reloc_root since btrfs_drop_snapshots() bails out
without freeing reloc_root at the very early start.

However, we're not able to free reloc_root in btrfs_drop_snapshots()
because its caller, merge_reloc_roots(), still needs to access it to
cleanup reloc_root's rbtree.

This makes us free reloc_root when we're going to free fs/file roots.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

Merge branch 'integration-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.8

Jeff Mahoney's cleanup commit (14a1e067) wasn't correct for csums on
machines where the pagesize >= metadata blocksize.

This just reverts the relevant hunks to bring the old math back.
Signed-off-by: NChris Mason <clm@fb.com>

No longer used as of commit 5846a3c2 ("btrfs: qgroup: Fix a race in
delayed_ref which leads to abort trans").
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

With commit 56f23fdb ("Btrfs: fix file/data loss caused by fsync after
rename and new inode") we got simple fix for a functional issue when the
following sequence of actions is done:

  at transaction N
  create file A at directory D
  at transaction N + M (where M >= 1)
  move/rename existing file A from directory D to directory E
  create a new file named A at directory D
  fsync the new file
  power fail

The solution was to simply detect such scenario and fallback to a full
transaction commit when we detect it. However this turned out to had a
significant impact on throughput (and a bit on latency too) for benchmarks
using the dbench tool, which simulates real workloads from smbd (Samba)
servers. For example on a test vm (with a debug kernel):

Unpatched:
Throughput 19.1572 MB/sec  32 clients  32 procs  max_latency=1005.229 ms

Patched:
Throughput 23.7015 MB/sec  32 clients  32 procs  max_latency=809.206 ms

The patched results (this patch is applied) are similar to the results of
a kernel with the commit 56f23fdb ("Btrfs: fix file/data loss caused
by fsync after rename and new inode") reverted.

This change avoids the fallback to a transaction commit and instead makes
sure all the names of the conflicting inode (the one that had a name in a
past transaction that matches the name of the new file in the same parent
directory) are logged so that at log replay time we don't lose neither the
new file nor the old file, and the old file gets the name it was renamed
to.

This also ends up avoiding a full transaction commit for a similar case
that involves an unlink instead of a rename of the old file:

  at transaction N
  create file A at directory D
  at transaction N + M (where M >= 1)
  remove file A
  create a new file named A at directory D
  fsync the new file
  power fail
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

When we attempt to read an inode from disk, we end up always returning an
-ESTALE error to the caller regardless of the actual failure reason, which
can be an out of memory problem (when allocating a path), some error found
when reading from the fs/subvolume btree (like a genuine IO error) or the
inode does not exists. So lets start returning the real error code to the
callers so that they don't treat all -ESTALE errors as meaning that the
inode does not exists (such as during orphan cleanup). This will also be
needed for a subsequent patch in the same series dealing with a special
fsync case.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

When doing an incremental send, if we find a new/modified/deleted extent,
reference or xattr without having previously processed the corresponding
inode item we end up exexuting a BUG_ON(). This is because whenever an
extent, xattr or reference is added, modified or deleted, we always expect
to have the corresponding inode item updated. However there are situations
where this will not happen due to transient -ENOMEM or -ENOSPC errors when
doing delayed inode updates.

For example, when punching holes we can succeed in deleting and modifying
(shrinking) extents but later fail to do the delayed inode update. So after
such failure we close our transaction handle and right after a snapshot of
the fs/subvol tree can be made and used later for a send operation. The
same thing can happen during truncate, link, unlink, and xattr related
operations.

So instead of executing a BUG_ON, make send return an -EIO error and print
an informative error message do dmesg/syslog.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

The caller of send_utimes() is supposed to be sure that the inode number
it passes to this function does actually exists in the send snapshot.
However due to logic/algorithm bugs (such as the one fixed by the patch
titled "Btrfs: send, fix invalid leaf accesses due to incorrect utimes
operations"), this might not be the case and when that happens it makes
send_utimes() access use an unrelated leaf item as the target inode item
or access beyond a leaf's boundaries (when the leaf is full and
path->slots[0] matches the number of items in the leaf).

So if the call to btrfs_search_slot() done by send_utimes() does not find
the inode item, just make sure send_utimes() returns -ENOENT and does not
silently accesses unrelated leaf items or does invalid leaf accesses, also
allowing us to easialy and deterministically catch such algorithmic/logic
bugs.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

During an incremental send, if we have delayed rename operations for inodes
that were children of directories which were removed in the send snapshot,
we can end up accessing incorrect items in a leaf or accessing beyond the
last item of the leaf due to issuing utimes operations for the removed
inodes. Consider the following example:

  Parent snapshot:
  .                                                             (ino 256)
  |--- a/                                                       (ino 257)
  |    |--- c/                                                  (ino 262)
  |
  |--- b/                                                       (ino 258)
  |    |--- d/                                                  (ino 263)
  |
  |--- del/                                                     (ino 261)
        |--- x/                                                 (ino 259)
        |--- y/                                                 (ino 260)

  Send snapshot:

  .                                                             (ino 256)
  |--- a/                                                       (ino 257)
  |
  |--- b/                                                       (ino 258)
  |
  |--- c/                                                       (ino 262)
  |    |--- y/                                                  (ino 260)
  |
  |--- d/                                                       (ino 263)
       |--- x/                                                  (ino 259)

1) When processing inodes 259 and 260, we end up delaying their rename
   operations because their parents, inodes 263 and 262 respectively, were
   not yet processed and therefore not yet renamed;

2) When processing inode 262, its rename operation is issued and right
   after the rename operation for inode 260 is issued. However right after
   issuing the rename operation for inode 260, at send.c:apply_dir_move(),
   we issue utimes operations for all current and past parents of inode
   260. This means we try to send a utimes operation for its old parent,
   inode 261 (deleted in the send snapshot), which does not cause any
   immediate and deterministic failure, because when the target inode is
   not found in the send snapshot, the send.c:send_utimes() function
   ignores it and uses the leaf region pointed to by path->slots[0],
   which can be any unrelated item (belonging to other inode) or it can
   be a region outside the leaf boundaries, if the leaf is full and
   path->slots[0] matches the number of items in the leaf. So we end
   up either successfully sending a utimes operation, which is fine
   and irrelevant because the old parent (inode 261) will end up being
   deleted later, or we end up doing an invalid memory access tha
   crashes the kernel.

So fix this by making apply_dir_move() issue utimes operations only for
parents that still exist in the send snapshot. In a separate patch we
will make send_utimes() return an error (-ENOENT) if the given inode
does not exists in the send snapshot.
Signed-off-by: NRobbie Ko <robbieko@synology.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed and better organized]
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

Under certain situations, when doing an incremental send, we can end up
not freeing orphan_dir_info structures as soon as they are no longer
needed. Instead we end up freeing them only after finishing the send
stream, which causes a warning to be emitted:

[282735.229200] ------------[ cut here ]------------
[282735.229968] WARNING: CPU: 9 PID: 10588 at fs/btrfs/send.c:6298 btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
[282735.231282] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[282735.237130] CPU: 9 PID: 10588 Comm: btrfs Tainted: G        W       4.6.0-rc7-btrfs-next-31+ #1
[282735.239309] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[282735.240160]  0000000000000000 ffff880224273ca8 ffffffff8126b42c 0000000000000000
[282735.240160]  0000000000000000 ffff880224273ce8 ffffffff81052b14 0000189a24273ac8
[282735.240160]  ffff8802210c9800 0000000000000000 0000000000000001 0000000000000000
[282735.240160] Call Trace:
[282735.240160]  [<ffffffff8126b42c>] dump_stack+0x67/0x90
[282735.240160]  [<ffffffff81052b14>] __warn+0xc2/0xdd
[282735.240160]  [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[282735.240160]  [<ffffffffa03c99d5>] btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
[282735.240160]  [<ffffffffa0398358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[282735.240160]  [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[282735.240160]  [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[282735.240160]  [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[282735.240160]  [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[282735.240160]  [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[282735.240160]  [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[282735.240160]  [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[282735.240160]  [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14
[282735.240160]  [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa
[282735.256343] ---[ end trace a4539270c8056f93 ]---

Consider the following example:

  Parent snapshot:

  .                                                             (ino 256)
  |--- a/                                                       (ino 257)
  |    |--- c/                                                  (ino 260)
  |
  |--- del/                                                     (ino 259)
        |--- tmp/                                               (ino 258)
        |--- x/                                                 (ino 261)
        |--- y/                                                 (ino 262)

  Send snapshot:

  .                                                             (ino 256)
  |--- a/                                                       (ino 257)
  |    |--- x/                                                  (ino 261)
  |    |--- y/                                                  (ino 262)
  |
  |--- c/                                                       (ino 260)
       |--- tmp/                                                (ino 258)

1) When processing inode 258, we end up delaying its rename operation
   because it has an ancestor (in the send snapshot) that has a higher
   inode number (inode 260) which was also renamed in the send snapshot,
   therefore we delay the rename of inode 258 so that it happens after
   inode 260 is renamed;

2) When processing inode 259, we end up delaying its deletion (rmdir
   operation) because it has a child inode (258) that has its rename
   operation delayed. At this point we allocate an orphan_dir_info
   structure and tag inode 258 so that we later attempt to see if we
   can delete (rmdir) inode 259 once inode 258 is renamed;

3) When we process inode 260, after renaming it we finally do the rename
   operation for inode 258. Once we issue the rename operation for inode
   258 we notice that this inode was tagged so that we attempt to see
   if at this point we can delete (rmdir) inode 259. But at this point
   we can not still delete inode 259 because it has 2 children, inodes
   261 and 262, that were not yet processed and therefore not yet
   moved (renamed) away from inode 259. We end up not freeing the
   orphan_dir_info structure allocated in step 2;

4) We process inodes 261 and 262, and once we move/rename inode 262
   we issue the rmdir operation for inode 260;

5) We finish the send stream and notice that red black tree that
   contains orphan_dir_info structures is not empty, so we emit
   a warning and then free any orphan_dir_structures left.

So fix this by freeing an orphan_dir_info structure once we try to
apply a pending rename operation if we can not delete yet the tagged
directory.

A test case for fstests follows soon.
Signed-off-by: NRobbie Ko <robbieko@synology.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
[Modified changelog to be more detailed and easier to understand]

Under certain situations, an incremental send operation can contain
a rmdir operation that will make the receiving end fail when attempting
to execute it, because the target directory is not yet empty.

Consider the following example:

  Parent snapshot:

  .                                                             (ino 256)
  |--- a/                                                       (ino 257)
  |    |--- c/                                                  (ino 260)
  |
  |--- del/                                                     (ino 259)
        |--- tmp/                                               (ino 258)
        |--- x/                                                 (ino 261)

  Send snapshot:

  .                                                             (ino 256)
  |--- a/                                                       (ino 257)
  |    |--- x/                                                  (ino 261)
  |
  |--- c/                                                       (ino 260)
       |--- tmp/                                                (ino 258)

1) When processing inode 258, we delay its rename operation because inode
   260 is its new parent in the send snapshot and it was not yet renamed
   (since 260 > 258, that is, beyond the current progress);

2) When processing inode 259, we realize we can not yet send an rmdir
   operation (against inode 259) because inode 258 was still not yet
   renamed/moved away from inode 259. Therefore we update data structures
   so that after inode 258 is renamed, we try again to see if we can
   finally send an rmdir operation for inode 259;

3) When we process inode 260, we send a rename operation for it followed
   by a rename operation for inode 258. Once we send the rename operation
   for inode 258 we then check if we can finally issue an rmdir for its
   previous parent, inode 259, by calling the can_rmdir() function with
   a value of sctx->cur_ino + 1 (260 + 1 = 261) for its "progress"
   argument. This makes can_rmdir() return true (value 1) because even
   though there's still a child inode of inode 259 that was not yet
   renamed/moved, which is inode 261, the given value of progress (261)
   is not lower then 261 (that is, not lower than the inode number of
   some child of inode 259). So we end up sending a rmdir operation for
   inode 259 before its child inode 261 is processed and renamed.

So fix this by passing the correct progress value to the call to
can_rmdir() from within apply_dir_move() (where we issue delayed rename
operations), which should match stcx->cur_ino (the number of the inode
currently being processed) and not sctx->cur_ino + 1.

A test case for fstests follows soon.
Signed-off-by: NRobbie Ko <robbieko@synology.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed, clear and well formatted]
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

Example scenario:

  Parent snapshot:

  .                                                       (ino 277)
  |---- tmp/                                              (ino 278)
  |---- pre/                                              (ino 280)
  |      |---- wait_dir/                                  (ino 281)
  |
  |---- desc/                                             (ino 282)
  |---- ance/                                             (ino 283)
  |       |---- below_ance/                               (ino 279)
  |
  |---- other_dir/                                        (ino 284)

  Send snapshot:

  .                                                       (ino 277)
  |---- tmp/                                              (ino 278)
         |---- other_dir/                                 (ino 284)
                   |---- below_ance/                      (ino 279)
                   |            |---- pre/                (ino 280)
                   |
                   |---- wait_dir/                        (ino 281)
                              |---- desc/                 (ino 282)
                                      |---- ance/         (ino 283)

While computing the send stream the following steps happen:

1) While processing inode 279 we end up delaying its rename operation
   because its new parent in the send snapshot, inode 284, was not
   yet processed and therefore not yet renamed;

2) Later when processing inode 280 we end up renaming it immediately to
   "ance/below_once/pre" and not delay its rename operation because its
   new parent (inode 279 in the send snapshot) has its rename operation
   delayed and inode 280 is not an encestor of inode 279 (its parent in
   the send snapshot) in the parent snapshot;

3) When processing inode 281 we end up delaying its rename operation
   because its new parent in the send snapshot, inode 284, was not yet
   processed and therefore not yet renamed;

4) When processing inode 282 we do not delay its rename operation because
   its parent in the send snapshot, inode 281, already has its own rename
   operation delayed and our current inode (282) is not an ancestor of
   inode 281 in the parent snapshot. Therefore inode 282 is renamed to
   "ance/below_ance/pre/wait_dir";

5) When processing inode 283 we realize that we can rename it because one
   of its ancestors in the send snapshot, inode 281, has its rename
   operation delayed and inode 283 is not an ancestor of inode 281 in the
   parent snapshot. So a rename operation to rename inode 283 to
   "ance/below_ance/pre/wait_dir/desc/ance" is issued. This path is
   invalid due to a missing path building loop that was undetected by
   the incremental send implementation, as inode 283 ends up getting
   included twice in the path (once with its path in the parent snapshot).
   Therefore its rename operation must wait before the ancestor inode 284
   is renamed.

Fix this by not terminating the rename dependency checks when we find an
ancestor, in the send snapshot, that has its rename operation delayed. So
that we continue doing the same checks if the current inode is not an
ancestor, in the parent snapshot, of an ancestor in the send snapshot we
are processing in the loop.

The problem and reproducer were reported by Robbie Ko, as part of a patch
titled "Btrfs: incremental send, avoid ancestor rename to descendant".
However the fix was unnecessarily complicated and can be addressed with
much less code and effort.
Reported-by: NRobbie Ko <robbieko@synology.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

The function path_loop() can return a negative integer, signaling an
error, 0 if there's no path loop and 1 if there's a path loop. We were
treating any non zero values as meaning that a path loop exists. Fix
this by explicitly checking for errors and gracefully return them to
user space.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

When doing an incremental send we can end up not moving directories that
have the same name. This happens when the same parent directory has
different child directories with the same name in the parent and send
snapshots.

For example, consider the following scenario:

  Parent snapshot:

  .                   (ino 256)
  |---- d/            (ino 257)
  |     |--- p1/      (ino 258)
  |
  |---- p1/           (ino 259)

  Send snapshot:

  .                    (ino 256)
  |--- d/              (ino 257)
       |--- p1/        (ino 259)
             |--- p1/  (ino 258)

The directory named "d" (inode 257) has in both snapshots an entry with
the name "p1" but it refers to different inodes in both snapshots (inode
258 in the parent snapshot and inode 259 in the send snapshot). When
attempting to move inode 258, the operation is delayed because its new
parent, inode 259, was not yet moved/renamed (as the stream is currently
processing inode 258). Then when processing inode 259, we also end up
delaying its move/rename operation so that it happens after inode 258 is
moved/renamed. This decision to delay the move/rename rename operation
of inode 259 is due to the fact that the new parent inode (257) still
has inode 258 as its child, which has the same name has inode 259. So
we end up with inode 258 move/rename operation waiting for inode's 259
move/rename operation, which in turn it waiting for inode's 258
move/rename. This results in ending the send stream without issuing
move/rename operations for inodes 258 and 259 and generating the
following warnings in syslog/dmesg:

[148402.979747] ------------[ cut here ]------------
[148402.980588] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6177 btrfs_ioctl_send+0xe03/0xe51 [btrfs]
[148402.981928] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[148402.986999] CPU: 14 PID: 4117 Comm: btrfs Tainted: G        W       4.6.0-rc7-btrfs-next-31+ #1
[148402.988136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[148402.988136]  0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
[148402.988136]  0000000000000000 ffff88022139fce8 ffffffff81052b14 000018212139fac8
[148402.988136]  ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
[148402.988136] Call Trace:
[148402.988136]  [<ffffffff8126b42c>] dump_stack+0x67/0x90
[148402.988136]  [<ffffffff81052b14>] __warn+0xc2/0xdd
[148402.988136]  [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[148402.988136]  [<ffffffffa04bc831>] btrfs_ioctl_send+0xe03/0xe51 [btrfs]
[148402.988136]  [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[148402.988136]  [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[148402.988136]  [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
[148402.988136]  [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[148402.988136]  [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[148402.988136]  [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[148402.988136]  [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[148402.988136]  [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[148402.988136]  [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[148402.988136]  [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
[148403.011373] ---[ end trace a4539270c8056f8b ]---
[148403.012296] ------------[ cut here ]------------
[148403.013071] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6194 btrfs_ioctl_send+0xe19/0xe51 [btrfs]
[148403.014447] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[148403.019708] CPU: 14 PID: 4117 Comm: btrfs Tainted: G        W       4.6.0-rc7-btrfs-next-31+ #1
[148403.020104] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[148403.020104]  0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
[148403.020104]  0000000000000000 ffff88022139fce8 ffffffff81052b14 000018322139fac8
[148403.020104]  ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
[148403.020104] Call Trace:
[148403.020104]  [<ffffffff8126b42c>] dump_stack+0x67/0x90
[148403.020104]  [<ffffffff81052b14>] __warn+0xc2/0xdd
[148403.020104]  [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[148403.020104]  [<ffffffffa04bc847>] btrfs_ioctl_send+0xe19/0xe51 [btrfs]
[148403.020104]  [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[148403.020104]  [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[148403.020104]  [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
[148403.020104]  [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[148403.020104]  [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[148403.020104]  [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[148403.020104]  [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[148403.020104]  [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[148403.020104]  [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[148403.020104]  [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
[148403.038981] ---[ end trace a4539270c8056f8c ]---

There's another issue caused by similar (but more complex) changes in the
directory hierarchy that makes move/rename operations fail, described with
the following example:

  Parent snapshot:

  .
  |---- a/                                                   (ino 262)
  |     |---- c/                                             (ino 268)
  |
  |---- d/                                                   (ino 263)
        |---- ance/                                          (ino 267)
                |---- e/                                     (ino 264)
                |---- f/                                     (ino 265)
                |---- ance/                                  (ino 266)

  Send snapshot:

  .
  |---- a/                                                   (ino 262)
  |---- c/                                                   (ino 268)
  |     |---- ance/                                          (ino 267)
  |
  |---- d/                                                   (ino 263)
  |     |---- ance/                                          (ino 266)
  |
  |---- f/                                                   (ino 265)
        |---- e/                                             (ino 264)

When the inode 265 is processed, the path for inode 267 is computed, which
at that time corresponds to "d/ance", and it's stored in the names cache.
Later on when processing inode 266, we end up orphanizing (renaming to a
name matching the pattern o<ino>-<gen>-<seq>) inode 267 because it has
the same name as inode 266 and it's currently a child of the new parent
directory (inode 263) for inode 266. After the orphanization and while we
are still processing inode 266, a rename operation for inode 266 is
generated. However the source path for that rename operation is incorrect
because it ends up using the old, pre-orphanization, name of inode 267.
The no longer valid name for inode 267 was previously cached when
processing inode 265 and it remains usable and considered valid until
the inode currently being processed has a number greater than 267.
This resulted in the receiving side failing with the following error:

  ERROR: rename d/ance/ance -> d/ance failed: No such file or directory

So fix these issues by detecting such circular dependencies for rename
operations and by clearing the cached name of an inode once the inode
is orphanized.

A test case for fstests will follow soon.
Signed-off-by: NRobbie Ko <robbieko@synology.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed and organized, and improved
 comments]
Signed-off-by: NFilipe Manana <fdmanana@suse.com>

When we start an fsync we start ordered extents for all delalloc ranges.
However before attempting to log the inode, we only wait for those ordered
extents if we are not doing a full sync (bit BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's flags). This means that if an ordered extent
completes with an IO error before we check if we can skip logging the
inode, we will not catch and report the IO error to user space. This is
because on an IO error, when the ordered extent completes we do not
update the inode, so if the inode was not previously updated by the
current transaction we end up not logging it through calls to fsync and
therefore not check its mapping flags for the presence of IO errors.

Fix this by checking for errors in the flags of the inode's mapping when
we notice we can skip logging the inode.

This caused sporadic failures in the test generic/331 (which explicitly
tests for IO errors during an fsync call).
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>

__btrfs_abort_transaction doesn't use its root parameter except to
obtain an fs_info pointer.  We can obtain that from trans->root->fs_info
for now and from trans->fs_info in a later patch.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_trans_handle->root is documented as for use for confirming
that the root passed in to start the transaction is the same as the
one ending it.  It's used in several places when an fs_info pointer
is needed, so let's just add an fs_info pointer directly.  Eventually,
the root pointer can be removed.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In btrfs_relocate_chunk, we get a transaction handle via
btrfs_start_trans_remove_block_group, which starts the transaction
using the extent root.  When we call btrfs_end_transaction, we're calling
it using the chunk root.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This patch converts the macros used to calculate various node
size limits to static inlines.  That way we get type checking for free.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We use BTRFS_LEAF_DATA_SIZE - sizeof(struct btrfs_item) in
several places.  This introduces a BTRFS_MAX_ITEM_SIZE macro to do the
same.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The function isn't implemented anywhere.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The root parameter for copy_to_sk is not used at all.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We just need a superblock, but we look it up using two different
roots depending on the call site.  Let's just use a superblock
pointer initialized at the outset.

This is mostly for Coccinelle not to choke on my root push up set.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>