The code that shows array fields for events is defined for all events.
This can add up quite a bit when you have over 500 events.

By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.

With a kernel configured with 502 events, the change in size was:

   text    data     bss     dec     hex filename
12990946        1913568 9785344 24689858        178bcc2 /tmp/vmlinux
12987390        1913504 9785344 24686238        178ae9e /tmp/vmlinux.patched

That's a total of 3556 bytes, which comes down to 7 bytes per event.
Although it's not much, this code is just called at initialization of
the events.

Link: http://lkml.kernel.org/r/20120810034708.084036335@goodmis.orgSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>

The code for trace events to format the raw recorded event data
into human readable format in the 'trace' file is repeated for every
event in the system. When you have over 500 events, this can add up
quite a bit.

By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.

With a kernel configured with 502 events, the change in size was:

   text    data     bss     dec     hex filename
12991007        1913568 9785344 24689919        178bcff /tmp/vmlinux.orig
12990946        1913568 9785344 24689858        178bcc2 /tmp/vmlinux.patched

Note, this version does not save as much as the version of this patch
I had a few years ago. That is because in the mean time, commit
f71130de ("tracing: Add a helper function for event print functions")
did a lot of the work my original patch did. But this change helps
slightly, and is part of a larger clean up to reduce the size much further.

Link: http://lkml.kernel.org/r/20120810034707.378538034@goodmis.org

Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.

Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.

Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.homeAcked-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.

Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger.  For example, to add a filter to an
enable/disable_event command:

    echo 'enable_event:system:event if common_pid == 999' > \
              .../othersys/otherevent/trigger

The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.

As another example, to add a filter to a stacktrace command:

    echo 'stacktrace if common_pid == 999' > \
                   .../somesys/someevent/trigger

The above command will only trigger a stacktrace if the common_pid
field in the event is 999.

The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.

Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.

There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.

There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers.  To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger.  Once all commands have been either invoked or set their
return flag, event_triggers_call() returns.  The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().

To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.

The syscall event invocation code is also changed in analogous ways.

Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.

Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add 'enable_event' and 'disable_event' event_command commands.

enable_event and disable_event event triggers are added by the user
via these commands in a similar way and using practically the same
syntax as the analagous 'enable_event' and 'disable_event' ftrace
function commands, but instead of writing to the set_ftrace_filter
file, the enable_event and disable_event triggers are written to the
per-event 'trigger' files:

    echo 'enable_event:system:event' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event' > .../othersys/otherevent/trigger

The above commands will enable or disable the 'system:event' trace
events whenever the othersys:otherevent events are hit.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger

Where N is the number of times the command will be invoked.

The above commands will will enable or disable the 'system:event'
trace events whenever the othersys:otherevent events are hit, but only
N times.

This also makes the find_event_file() helper function extern, since
it's useful to use from other places, such as the event triggers code,
so make it accessible.

Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add 'stacktrace' event_command.  stacktrace event triggers are added
by the user via this command in a similar way and using practically
the same syntax as the analogous 'stacktrace' ftrace function command,
but instead of writing to the set_ftrace_filter file, the stacktrace
event trigger is written to the per-event 'trigger' files:

    echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger

The above command will turn on stacktraces for someevent i.e. whenever
someevent is hit, a stacktrace will be logged.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above command will log N stacktraces for someevent i.e. whenever
someevent is hit N times, a stacktrace will be logged.

Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add 'snapshot' event_command.  snapshot event triggers are added by
the user via this command in a similar way and using practically the
same syntax as the analogous 'snapshot' ftrace function command, but
instead of writing to the set_ftrace_filter file, the snapshot event
trigger is written to the per-event 'trigger' files:

    echo 'snapshot' > .../somesys/someevent/trigger

The above command will turn on snapshots for someevent i.e. whenever
someevent is hit, a snapshot will be done.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'snapshot:N' > .../somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above command will snapshot N times for someevent i.e. whenever
someevent is hit N times, a snapshot will be done.

Also adds a new tracing_alloc_snapshot() function - the existing
tracing_snapshot_alloc() function is a special version of
tracing_snapshot() that also does the snapshot allocation - the
snapshot triggers would like to be able to do just the allocation but
not take a snapshot; the existing tracing_snapshot_alloc() in turn now
also calls tracing_alloc_snapshot() underneath to do that allocation.

Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
[ fix up from kbuild test robot <fengguang.wu@intel.com report ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add 'traceon' and 'traceoff' event_command commands.  traceon and
traceoff event triggers are added by the user via these commands in a
similar way and using practically the same syntax as the analagous
'traceon' and 'traceoff' ftrace function commands, but instead of
writing to the set_ftrace_filter file, the traceon and traceoff
triggers are written to the per-event 'trigger' files:

    echo 'traceon' > .../tracing/events/somesys/someevent/trigger
    echo 'traceoff' > .../tracing/events/somesys/someevent/trigger

The above command will turn tracing on or off whenever someevent is
hit.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger
    echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above commands will will turn tracing on or off whenever someevent
is hit, but only N times.

Some common register/unregister_trigger() implementations of the
event_command reg()/unreg() callbacks are also provided, which add and
remove trigger instances to the per-event list of triggers, and
arm/disarm them as appropriate.  event_trigger_callback() is a
general-purpose event_command func() implementation that orchestrates
command parsing and registration for most normal commands.

Most event commands will use these, but some will override and
possibly reuse them.

The event_trigger_init(), event_trigger_free(), and
event_trigger_print() functions are meant to be common implementations
of the event_trigger_ops init(), free(), and print() ops,
respectively.

Most trigger_ops implementations will use these, but some will
override and possibly reuse them.

Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.

'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.

The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.

The event trigger functionality is built on top of SOFT_DISABLE
functionality.  It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires.  Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that.  Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function.  Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.

The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.

The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.

The standard open, read, and release file operations are implemented
here.

The open() implementation sets up for the various open modes of the
'trigger' file.  It creates and attaches the trigger iterator and sets
up the command parser.  If opened for reading set up the trigger
seq_ops.

The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.

The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.

A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.

also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.

A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations.  They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.

The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event.  It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.

Every event_command func() implementation essentially does the
same thing for any command:

   - choose ops - use the value of param to choose either a number or
     count version of event_trigger_ops specific to the command
   - do the register or unregister of those ops
   - associate a filter, if specified, with the triggering event

The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized.  When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite.  The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.

Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.

The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions.  This allows func()
implementations to use command-specific blobs and supports code
re-use.

The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked.  The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.

This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.

Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: NSteve Rostedt <rostedt@goodmis.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Vince's perf-trinity fuzzer found yet another 'interesting' problem.

When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:

  ,-> <IPI>
  |     irq_work_exit() ->
  |       trace_irq_work_exit() ->
  |         ...
  |           __perf_event_overflow() -> (due to fasync)
  |             irq_work_queue() -> (irq_work_list must be empty)
  '---------      arch_irq_work_raise()

Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.

To avoid this, dis-allow sampling this particular tracepoint.

In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.

[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Tested-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:

Before:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 2048
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.

After:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters.  For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.

The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).

Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.comSigned-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

tracing_read_pipe zeros all fields bellow "seq". The declaration contains
a comment about that, but it doesn't help.

The first field is "snapshot", it's true when current open file is
snapshot. Looks obvious, that it should not be zeroed.

The second field is "started". It was converted from cpumask_t to
cpumask_var_t (v2.6.28-4983-g4462344e), in other words it was
converted from cpumask to pointer on cpumask.

Currently the reference on "started" memory is lost after the first read
from tracing_read_pipe and a proper object will never be freed.

The "started" is never dereferenced for trace_pipe, because trace_pipe
can't have the TRACE_FILE_ANNOTATE options.

Link: http://lkml.kernel.org/r/1375463803-3085183-1-git-send-email-avagin@openvz.org

Cc: stable@vger.kernel.org # 2.6.30
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Change trace_remove_event_call(call) to return the error if this
call is active. This is what the callers assume but can't verify
outside of the tracing locks. Both trace_kprobe.c/trace_uprobe.c
need the additional changes, unregister_trace_probe() should abort
if trace_remove_event_call() fails.

The caller is going to free this call/file so we must ensure that
nobody can use them after trace_remove_event_call() succeeds.
debugfs should be fine after the previous changes and event_remove()
does TRACE_REG_UNREGISTER, but still there are 2 reasons why we need
the additional checks:

- There could be a perf_event(s) attached to this tp_event, so the
  patch checks ->perf_refcount.

- TRACE_REG_UNREGISTER can be suppressed by FTRACE_EVENT_FL_SOFT_MODE,
  so we simply check FTRACE_EVENT_FL_ENABLED protected by event_mutex.

Link: http://lkml.kernel.org/r/20130729175033.GB26284@redhat.comReviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are several tracepoints (mostly in RCU), that reference a string
pointer and uses the print format of "%s" to display the string that
exists in the kernel, instead of copying the actual string to the
ring buffer (saves time and ring buffer space).

But this has an issue with userspace tools that read the binary buffers
that has the address of the string but has no access to what the string
itself is. The end result is just output that looks like:

 rcu_dyntick:          ffffffff818adeaa 1 0
 rcu_dyntick:          ffffffff818adeb5 0 140000000000000
 rcu_dyntick:          ffffffff818adeb5 0 140000000000000
 rcu_utilization:      ffffffff8184333b
 rcu_utilization:      ffffffff8184333b

The above is pretty useless when read by the userspace tools. Ideally
we would want something that looks like this:

 rcu_dyntick:          Start 1 0
 rcu_dyntick:          End 0 140000000000000
 rcu_dyntick:          Start 140000000000000 0
 rcu_callback:         rcu_preempt rhp=0xffff880037aff710 func=put_cred_rcu 0/4
 rcu_callback:         rcu_preempt rhp=0xffff880078961980 func=file_free_rcu 0/5
 rcu_dyntick:          End 0 1

The trace_printk() which also only stores the address of the string
format instead of recording the string into the buffer itself, exports
the mapping of kernel addresses to format strings via the printk_format
file in the debugfs tracing directory.

The tracepoint strings can use this same method and output the format
to the same file and the userspace tools will be able to decipher
the address without any modification.

The tracepoint strings need its own section to save the strings because
the trace_printk section will cause the trace_printk() buffers to be
allocated if anything exists within the section. trace_printk() is only
used for debugging and should never exist in the kernel, we can not use
the trace_printk sections.

Add a new tracepoint_str section that will also be examined by the output
of the printk_format file.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Modify soft-mode flag only if no other soft-mode referrer
(currently only the ftrace triggers) by using a reference
counter in each ftrace_event_file.

Without this fix, adding and removing several different
enable/disable_event triggers on the same event clear
soft-mode bit from the ftrace_event_file. This also
happens with a typo of glob on setting triggers.

e.g.

 # echo vfs_symlink:enable_event:net:netif_rx > set_ftrace_filter
 # cat events/net/netif_rx/enable
 0*
 # echo typo_func:enable_event:net:netif_rx > set_ftrace_filter
 # cat events/net/netif_rx/enable
 0
 # cat set_ftrace_filter
 #### all functions enabled ####
 vfs_symlink:enable_event:net:netif_rx:unlimited

As above, we still have a trigger, but soft-mode is gone.

Link: http://lkml.kernel.org/r/20130509054429.30398.7464.stgit@mhiramat-M0-7522

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The formats of the trace events show if the type of a event field
is signed or not via a macro called is_signed_type(). This does
a trick with the type and compares a -1 to zero after typecasting
to the tested type. If it returns true, it's signed, otherwise
its not. But this unfortunately triggers a warning by gcc:

  warning: comparison of unsigned expression < 0 is always false

As we know it is always false (that's why we do it), this is a
false warning. Luckily for us, the comparison works with a 1 as
well, without giving the warning.

Convert the check to compare (type)-1 < (type)0 to (type)-1 < (type)1
to determine if the type is signed or not.

Link: http://lkml.kernel.org/r/CAErSpo4YXcY9fuOKWYGDkddJwk68kmZTohsmVB6QvrhjboOh1Q@mail.gmail.comReported-by: NBjorn Helgaas <bhelgaas@google.com>
Reported-by: NGary Hade <garyhade@us.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In order to let triggers enable or disable events, we need a 'soft'
method for doing so. For example, if a function probe is added that
lets a user enable or disable events when a function is called, that
change must be done without taking locks or a mutex, and definitely
it can't sleep. But the full enabling of a tracepoint is expensive.

By adding a 'SOFT_DISABLE' flag, and converting the flags to be updated
without the protection of a mutex (using set/clear_bit()), this soft
disable flag can be used to allow critical sections to enable or disable
events from being traced (after the event has been placed into "SOFT_MODE").

Some caveats though: The comm recorder (to map pids with a comm) can not
be soft disabled (yet). If you disable an event with with a "soft"
disable and wait a while before reading the trace, the comm cache may be
replaced and you'll get a bunch of <...> for comms in the trace.

Reading the "enable" file for an event that is disabled will now give
you "0*" where the '*' denotes that the tracepoint is still active but
the event itself is "disabled".

[ fixed _BIT used in & operation : thanks to Dan Carpenter and smatch ]

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Most of the flags for the struct ftrace_event_file were moved over
to the flags of the struct ftrace_event_call, but the comments were
never updated.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, when a module with events is unloaded, the trace buffer is
cleared. This is just a safety net in case the module might have some
strange callback when its event is outputted. But there's no reason
to reset the buffer if the module didn't have any of its events traced.

Add a flag to the event "call" structure called WAS_ENABLED and gets set
when the event is ever enabled, and this flag never gets cleared. When a
module gets unloaded, if any of its events have this flag set, then the
trace buffer will get cleared.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

All the trace event flags have comments but the IGNORE_ENABLE flag
which is set for ftrace internal events that should not be enabled
via the debugfs "enable" file. That is, if the top level enable file
is set, it will enable all events. It use to just check the ftrace
event call descriptor "reg" field and skip those whithout it, but now
some ftrace internal events have a reg field but still need to be
skipped. The flag was created to ignore those events.

Now document it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move duplicate code in event print functions to a helper function.

This shrinks the size of the kernel by ~13K.

   text    data     bss     dec     hex filename
6596137 1743966 10138672        18478775        119f6b7 vmlinux.o.old
6583002 1743849 10138672        18465523        119c2f3 vmlinux.o.new

Link: http://lkml.kernel.org/r/51258746.2060304@huawei.comSigned-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Pass the struct ftrace_event_file *ftrace_file to the
trace_event_buffer_lock_reserve() (new function that replaces the
trace_current_buffer_lock_reserver()).

The ftrace_file holds a pointer to the trace_array that is in use.
In the case of multiple buffers with different trace_arrays, this
allows different events to be recorded into different buffers.

Also fixed some of the stale comments in include/trace/ftrace.h
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).

By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.

Add "snapshot" debugfs file in "tracing" directory.

  snapshot:
    This is used to take a snapshot and to read the output of the
    snapshot.

     # echo 1 > snapshot

    This will allocate the spare buffer for snapshot (if it is
    not allocated), and take a snapshot.

     # cat snapshot

    This will show contents of the snapshot.

     # echo 0 > snapshot

    This will free the snapshot if it is allocated.

    Any other positive values will clear the snapshot contents if
    the snapshot is allocated, or return EINVAL if it is not allocated.

Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia

Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
   Fixed irqsoff selftest and also a conflict with a change
   that fixes the update_max_tr.
]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Due to a userspace issue with PowerTop v2beta, which hardcoded
the offset of event fields that it was using, it broke when
we removed the Big Kernel Lock counter from the event header.

 (commit e6e1e259 "tracing: Remove lock_depth from event entry")

Because this broke userspace, it was determined that we must
keep those 4 bytes around.

 (commit a3a4a5ac "Regression: partial revert "tracing: Remove lock_depth from event entry"")

This unfortunately wastes space in the ring buffer. 4 bytes per
event, where a lot of events are just 24 bytes. That's 16% of the
buffer wasted. A million events will add 4 megs of white space
into the buffer.

It was later noticed that PowerTop v2beta could not work on systems
where the kernel was 64 bit but the userspace was 32 bits.
The reason was because the offsets are different between the
two and the hard coded offset of one would not work with the other.

With PowerTop v2 final, it implemented the same interface that both
perf and trace-cmd use. That is, it reads the format file of
the event to find the offsets of the fields it needs. This fixes
the problem with running powertop on a 32 bit userspace running
on a 64 bit kernel. It also no longer requires the 4 byte padding.

As PowerTop v2 has been out for a while, and is included in all
major distributions, it is time that we can safely remove the
4 bytes of padding. Users of PowerTop v2beta should upgrade to
PowerTop v2 final.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Sparse complains when is_signed_type() is used on a pointer.
This macro is needed for the format output used for ftrace
and perf, to know if a binary field is a signed type or not.
The is_signed_type() macro is used against all fields that are
recorded by events to automate the operation.

The problem sparse has is with the current way is_signed_type()
works:

  ((type)-1 < 0)

If "type" is a poiner, than sparse does not like it being compared
to an integer (zero). The simple fix is to just give zero the
same type. The runtime result stays the same.
Reported-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With the addition of the "tsc" clock, formatting timestamps to look like
fractional seconds is misleading. Mark clocks as either in nanoseconds or
not, and format non-nanosecond timestamps as decimal integers.

Tested:
$ cd /sys/kernel/debug/tracing/
$ cat trace_clock
[local] global tsc
$ echo sched_switch > set_event
$ echo 1 > tracing_on ; sleep 0.0005 ; echo 0 > tracing_on
$ cat trace
          <idle>-0     [000]  6330.555552: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=29964 next_prio=120
           sleep-29964 [000]  6330.555628: sched_switch: prev_comm=bash prev_pid=29964 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...
$ echo 1 > options/latency-format
$ cat trace
  <idle>-0       0 4104553247us+: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=29964 next_prio=120
   sleep-29964   0 4104553322us+: sched_switch: prev_comm=bash prev_pid=29964 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...
$ echo tsc > trace_clock
$ cat trace
$ echo 1 > tracing_on ; sleep 0.0005 ; echo 0 > tracing_on
$ echo 0 > options/latency-format
$ cat trace
          <idle>-0     [000] 16490053398357: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=31128 next_prio=120
           sleep-31128 [000] 16490053588518: sched_switch: prev_comm=bash prev_pid=31128 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...
echo 1 > options/latency-format
$ cat trace
  <idle>-0       0 91557653238+: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=31128 next_prio=120
   sleep-31128   0 91557843399+: sched_switch: prev_comm=bash prev_pid=31128 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...

v2:
Move arch-specific bits out of generic code.
v4:
Fix x86_32 build due to 64-bit division.

Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1352837903-32191-2-git-send-email-dhsharp@google.com

Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Have the ring buffer commit function use the irq_work infrastructure to
wake up any waiters waiting on the ring buffer for new data. The irq_work
was created for such a purpose, where doing the actual wake up at the
time of adding data is too dangerous, as an event or function trace may
be in the midst of the work queue locks and cause deadlocks. The irq_work
will either delay the action to the next timer interrupt, or trigger an IPI
to itself forcing an interrupt to do the work (in a safe location).

With irq_work, all ring buffer commits can safely do wakeups, removing
the need for the ring buffer commit "nowake" variants, which were used
by events and function tracing. All commits can now safely use the
normal commit, and the "nowake" variants can be removed.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.

Now a target task can be set by using __perf_task().

The original idea and a draft patch belongs to Peter Zijlstra.

I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Inspired-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Replace the NR_CPUS array of buffer_iter from the trace_iterator
with an allocated array. This will just create an array of
possible CPUS instead of the max number specified.

The use of NR_CPUS in that array caused allocation failures for
machines that were tight on memory. This did not cause any failures
to the system itself (no crashes), but caused unnecessary failures
for reading the trace files.

Added a helper function called 'trace_buffer_iter()' that returns
the buffer_iter item or NULL if it is not defined or the array was
not allocated. Some routines do not require the array
(tracing_open_pipe() for one).
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

	TRACE_EVENT_FL_ENABLED_BIT,
	TRACE_EVENT_FL_FILTERED_BIT,
	TRACE_EVENT_FL_RECORDED_CMD_BIT,

Have comments about what they are, but:

	TRACE_EVENT_FL_CAP_ANY_BIT,
	TRACE_EVENT_FL_NO_SET_FILTER_BIT,
	TRACE_EVENT_FL_IGNORE_ENABLE_BIT,

do not, making them second class citizens. To prevent another
class warfare, these bits have protested for their right to be
commented. And By Golly! I'll give them what they want!
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With the adding of function tracing event to perf, it caused a
side effect that produces the following warning when enabling all
events in ftrace:

 # echo 1 > /sys/kernel/debug/tracing/events/enable

[console]
event trace: Could not enable event function

This is because when enabling all events via the debugfs system
it ignores events that do not have a ->reg() function assigned.
This was to skip over the ftrace internal events (as they are
not TRACE_EVENTs). But as the ftrace function event now has
a ->reg() function attached to it for use with perf, it is no
longer ignored.

Worse yet, this ->reg() function is being called when it should
not be. It returns an error and causes the above warning to
be printed.

By adding a new event_call flag (TRACE_EVENT_FL_IGNORE_ENABLE)
and have all ftrace internel event structures have it set,
setting the events/enable will no longe try to incorrectly enable
the function event and does not warn.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Fix for unused symbols in switch warnings.

Link: http://lkml.kernel.org/r/20120313230302.GA1514@m.redhat.com

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Adding FILTER_TRACE_FN event field type for function tracepoint
event, so it can be properly recognized within filtering code.

Currently all fields of ftrace subsystem events share the common
field type FILTER_OTHER. Since the function trace fields need
special care within the filtering code we need to recognize it
properly, hence adding the FILTER_TRACE_FN event type.

Adding filter parameter to the FTRACE_ENTRY macro, to specify the
filter field type for the event.

Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.

The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.

Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.comAcked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate
register/unregister from open/close actions.

The register/unregister actions are invoked for the first/last
tracepoint user when opening/closing the event.

The open/close actions are invoked for each tracepoint user when
opening/closing the event.

Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.comAcked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Though not all events have field 'prev_pid', it was allowed to do this:

  # echo 'prev_pid == 100' > events/sched/filter

but commit 75b8e982 (tracing/filter: Swap
entire filter of events) broke it without any reason.

Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.comSigned-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Though not all events have field 'prev_pid', it was allowed to do this:

  # echo 'prev_pid == 100' > events/sched/filter

but commit 75b8e982 (tracing/filter: Swap
entire filter of events) broke it without any reason.

Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.comSigned-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently the stack trace per event in ftace is only 8 frames.
This can be quite limiting and sometimes useless. Especially when
the "ignore frames" is wrong and we also use up stack frames for
the event processing itself.

Change this to be dynamic by adding a percpu buffer that we can
write a large stack frame into and then copy into the ring buffer.

For interrupts and NMIs that come in while another event is being
process, will only get to use the 8 frame stack. That should be enough
as the task that it interrupted will have the full stack frame anyway.
Requested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>