Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 12 6月, 2017 3 次提交
  3. 17 5月, 2017 1 次提交
  5. 11 5月, 2017 1 次提交
  7. 09 5月, 2017 3 次提交
    • H
      s390: move _text symbol to address higher than zero · d04a4c76
      由 Heiko Carstens 提交于 
      The perf tool assumes that kernel symbols are never present at address
zero. In fact it assumes if functions that map symbols to addresses
return zero, that the symbol was not found.

Given that s390's _text symbol historically is located at address zero
this yields at least a couple of false errors and warnings in one of
perf's test cases about not present symbols ("perf test 1").

To fix this simply move the _text symbol to address 0x200, just behind
the initial psw and channel program located at the beginning of the
kernel image. This is now hard coded within the linker script.

I tried a nicer solution which moves the initial psw and channel
program into an own section. However that would move the symbols
within the "real" head.text section to different addresses, since the
".org" statements within head.S are relative to the head.text
section. If there is a new section in front, everything else will be
moved. Alternatively I could have adjusted all ".org" statements. But
this current solution seems to be the easiest one, since nobody really
cares where the _text symbol is actually located.
Reported-by: NZvonko Kosic <zkosic@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      d04a4c76
    • L
      s390: use set_memory.h header · e6c7c630
      由 Laura Abbott 提交于 
      set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly

Link: http://lkml.kernel.org/r/1488920133-27229-5-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e6c7c630
    • A
      cpumask: make "nr_cpumask_bits" unsigned · c311c797
      由 Alexey Dobriyan 提交于 
      Bit searching functions accept "unsigned long" indices but
"nr_cpumask_bits" is "int" which is signed, so inevitable sign
extensions occur on x86_64.  Those MOVSX are #1 MOVSX bloat by number of
uses across whole kernel.

Change "nr_cpumask_bits" to unsigned, this number can't be negative
after all.  It allows to do implicit zero-extension on x86_64 without
MOVSX.

Change signed comparisons into unsigned comparisons where necessary.

Other uses looks fine because it is either argument passed to a function
or comparison is already unsigned.

Net win on allyesconfig type of kernel: ~2.8 KB (!)

	add/remove: 0/0 grow/shrink: 8/725 up/down: 93/-2926 (-2833)
	function                                     old     new   delta
	xen_exit_mmap                                691     735     +44
	qstat_read                                   426     440     +14
	__cpufreq_cooling_register                  1678    1687      +9
	trace_rb_cpu_prepare                         447     455      +8
	vermagic                                      54      60      +6
	nfp_driver_version                            54      60      +6
	rcu_torture_stats_print                     1147    1151      +4
	find_next_push_cpu                           267     269      +2
	xen_irq_resume                               961     960      -1
				...
	init_vp_index                                946     906     -40
	od_set_powersave_bias                        328     281     -47
	power_cpu_exit                               193     139     -54
	arch_show_interrupts                        3538    3484     -54
	select_idle_sibling                         1558    1471     -87
	Total: Before=158358910, After=158356077, chg -0.00%

Same arguments apply to "nr_cpu_ids" but I haven't yet found enough
courage to delve into this issue (and proper fix may require new type
"cpu_t" which is whole separate story).

Link: http://lkml.kernel.org/r/20170309205322.GA1728@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c311c797
  9. 03 5月, 2017 2 次提交
  11. 21 4月, 2017 1 次提交
  13. 15 4月, 2017 1 次提交
    • N
      s390/time: Set ->min_delta_ticks and ->max_delta_ticks · 06c54611
      由 Nicolai Stange 提交于 
      In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.

Currently, the s390's CPU timer clockevent device is initialized as
follows:

  cd->min_delta_ns    = 1;
  cd->max_delta_ns    = LONG_MAX;

Note that the device's time to cycle conversion factor, i.e.
cd->mult / (2^cd->shift), is approx. equal to 4.

Hence, this would translate to

  cd->min_delta_ticks = 4;
  cd->max_delta_ticks = 4 * LONG_MAX;

However, a minimum value of 1ns is in the range of noise anyway and the
clockevent core will take care of this by increasing it to 1us or so.
Furthermore, 4*LONG_MAX would overflow the unsigned long argument the
clockevent devices gets programmed with.

Thus, initialize ->min_delta_ticks with 1 and ->max_delta_ticks with
ULONG_MAX.

This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from this
driver.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: NNicolai Stange <nicstange@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      06c54611
  15. 12 4月, 2017 1 次提交
  17. 05 4月, 2017 2 次提交
    • M
      s390/cpumf: simplify detection of guest samples · df26c2e8
      由 Martin Schwidefsky 提交于 
      There are three different code levels in regard to the identification
of guest samples. They differ in the way the LPP instruction is used.

1) Old kernels without the LPP instruction. The guest program parameter
   is always zero.
2) Newer kernels load the process pid into the program parameter with LPP.
   The guest program parameter is non-zero if the guest executes in a
   process != idle.
3) The latest kernels load ((1UL << 31) | pid) with LPP to make the value
   non-zero even for the idle task. The guest program parameter is non-zero
   if the guest is running.

All kernels load the process pid to CR4 on context switch. The CPU sampling
code uses the value in CR4 to decide between guest and host samples in case
the guest program parameter is zero. The three cases:

1) CR4==pid, gpp==0
2) CR4==pid, gpp==pid
3) CR4==pid, gpp==((1UL << 31) | pid)

The load-control instruction to load the pid into CR4 is expensive and the
goal is to remove it. To distinguish the host CR4 from the guest pid for
the idle process the maximum value 0xffff for the PASN is used.
This adds a fourth case for a guest OS with an updated kernel:

4) CR4==0xffff, gpp=((1UL << 31) | pid)

The host kernel will have CR4==0xffff and will use (gpp!=0 || CR4!==0xffff)
to identify guest samples. This works nicely with all 4 cases, the only
possible issue would be a guest with an old kernel (gpp==0) and a process
pid of 0xffff. Well, don't do that..
Suggested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      df26c2e8
    • M
      s390: use 64-bit lctlg to load task pid to cr4 on context switch · cab36c26
      由 Martin Schwidefsky 提交于 
      The 32-bit lctl instruction is quite a bit slower than the 64-bit
counter part lctlg. Use the faster instruction.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      cab36c26
  19. 01 4月, 2017 1 次提交
  21. 31 3月, 2017 6 次提交
  23. 28 3月, 2017 1 次提交
    • M
      s390/kdump: Add final note · dcc00b79
      由 Michael Holzheu 提交于 
      Since linux v3.14 with commit 38dfac84 ("vmcore: prevent PT_NOTE
p_memsz overflow during header update") on s390 we get the following
message in the kdump kernel:

  Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x6b6b6b6b,
  n_descsz=0x6b6b6b6b

The reason for this is that we don't create a final zero note in
the ELF header which the proc/vmcore code uses to find out the end
of the notes section (see also kernel/kexec_core.c:final_note()).

It still worked on s390 by chance because we (most of the time?) have the
byte pattern 0x6b6b6b6b after the notes section which also makes the notes
parsing code stop in update_note_header_size_elf64() because 0x6b6b6b6b is
interpreded as note size:

  if ((real_sz + sz) > max_sz) {
          pr_warn("Warning: Exceeded p_memsz, dropping P ...);
          break;
  }

So fix this and add the missing final note to the ELF header.
We don't have to adjust the memory size for ELF header ("alloc_size")
because the new ELF note still fits into the 0x1000 base memory.

Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      dcc00b79
  25. 22 3月, 2017 12 次提交
  27. 10 3月, 2017 1 次提交
  29. 08 3月, 2017 1 次提交
    • M
      livepatch/s390: add TIF_PATCH_PENDING thread flag · 2f09ca60
      由 Miroslav Benes 提交于 
      Update a task's patch state when returning from a system call or user
space interrupt, or after handling a signal.

This greatly increases the chances of a patch operation succeeding.  If
a task is I/O bound, it can be patched when returning from a system
call.  If a task is CPU bound, it can be patched when returning from an
interrupt.  If a task is sleeping on a to-be-patched function, the user
can send SIGSTOP and SIGCONT to force it to switch.

Since there are two ways the syscall can be restarted on return from a
signal handling process, it is important to clear the flag before
do_signal() is called. Otherwise we could miss the migration if we used
SIGSTOP/SIGCONT procedure or fake signal to migrate patching blocking
tasks. If we place our hook to sysc_work label in entry before
TIF_SIGPENDING is evaluated we kill two birds with one stone. The task
is correctly migrated in all return paths from a syscall.
Signed-off-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      2f09ca60
  31. 03 3月, 2017 2 次提交
    • I
      sched/headers: Move task->mm handling methods to <linux/sched/mm.h> · 68e21be2
      由 Ingo Molnar 提交于 
      Move the following task->mm helper APIs into a new header file,
<linux/sched/mm.h>, to further reduce the size and complexity
of <linux/sched.h>.

Here are how the APIs are used in various kernel files:

  # mm_alloc():
  arch/arm/mach-rpc/ecard.c
  fs/exec.c
  include/linux/sched/mm.h
  kernel/fork.c

  # __mmdrop():
  arch/arc/include/asm/mmu_context.h
  include/linux/sched/mm.h
  kernel/fork.c

  # mmdrop():
  arch/arm/mach-rpc/ecard.c
  arch/m68k/sun3/mmu_emu.c
  arch/x86/mm/tlb.c
  drivers/gpu/drm/amd/amdkfd/kfd_process.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/hw/hfi1/file_ops.c
  drivers/vfio/vfio_iommu_spapr_tce.c
  fs/exec.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/mmu_notifier.h
  include/linux/sched/mm.h
  kernel/fork.c
  kernel/futex.c
  kernel/sched/core.c
  mm/khugepaged.c
  mm/ksm.c
  mm/mmu_context.c
  mm/mmu_notifier.c
  mm/oom_kill.c
  virt/kvm/kvm_main.c

  # mmdrop_async_fn():
  include/linux/sched/mm.h

  # mmdrop_async():
  include/linux/sched/mm.h
  kernel/fork.c

  # mmget_not_zero():
  fs/userfaultfd.c
  include/linux/sched/mm.h
  mm/oom_kill.c

  # mmput():
  arch/arc/include/asm/mmu_context.h
  arch/arc/kernel/troubleshoot.c
  arch/frv/mm/mmu-context.c
  arch/powerpc/platforms/cell/spufs/context.c
  arch/sparc/include/asm/mmu_context_32.h
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/core/uverbs_main.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/exec.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/events/uprobes.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/oom_kill.c
  mm/process_vm_access.c
  mm/rmap.c
  mm/swapfile.c
  mm/util.c
  virt/kvm/async_pf.c

  # mmput_async():
  include/linux/sched/mm.h
  kernel/fork.c
  mm/oom_kill.c

  # get_task_mm():
  arch/arc/kernel/troubleshoot.c
  arch/powerpc/platforms/cell/spufs/context.c
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/util.c

  # mm_access():
  fs/proc/base.c
  include/linux/sched/mm.h
  kernel/fork.c
  mm/process_vm_access.c

  # mm_release():
  arch/arc/include/asm/mmu_context.h
  fs/exec.c
  include/linux/sched/mm.h
  include/uapi/linux/sched.h
  kernel/exit.c
  kernel/fork.c
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      68e21be2
    • H
      s390/ipl: always use load normal for CCW-type re-IPL · 7afbeb6d
      由 Heiko Carstens 提交于 
      commit 14890678687c ("s390/ipl: use load normal for LPAR re-ipl")
missed to convert one code path to use load normal semantics for
re-IPL. Convert the missing code path as well.

Fixes: 14890678687c ("s390/ipl: use load normal for LPAR re-ipl")
Reported-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      7afbeb6d
  33. 02 3月, 2017 1 次提交