- 27 4月, 2013 6 次提交
-
-
由 Mihai Caraman 提交于
Refactor Book3E ONE_REG ioctl implementation to use kvmppc_get_one_reg/ kvmppc_set_one_reg delegation interface introduced by Book3S. This is necessary for MMU SPRs which are platform specifics. Get rid of useless case braces in the process. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
This allows the exit to user space if emulator request by returning EMULATE_EXIT_USER. This will be used in subsequent patches in list Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
Currently the instruction emulator code returns EMULATE_EXIT_USER and common code initializes the "run->exit_reason = .." and "vcpu->arch.hcall_needed = .." with one fixed reason. But there can be different reasons when emulator need to exit to user space. To support that the "run->exit_reason = .." and "vcpu->arch.hcall_needed = .." initialization is moved a level up to emulator. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
Instruction emulation return EMULATE_DO_PAPR when it requires exit to userspace on book3s. Similar return is required for booke. EMULATE_DO_PAPR reads out to be confusing so it is renamed to EMULATE_EXIT_USER. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
This patch defines the interface parameter for KVM_SET_GUEST_DEBUG ioctl support. Follow up patches will use this for setting up hardware breakpoints, watchpoints and software breakpoints. Also kvm_arch_vcpu_ioctl_set_guest_debug() is brought one level below. This is because I am not sure what is required for book3s. So this ioctl behaviour will not change for book3s. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
Kernel can only access pages which maps as memory. So flush only the valid kernel pages. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 25 4月, 2013 1 次提交
-
-
由 Gleb Natapov 提交于
Source operand for one byte mov[zs]x is decoded incorrectly if it is in high byte register. Fix that. Cc: stable@vger.kernel.org Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
- 22 4月, 2013 18 次提交
-
-
由 Jan Kiszka 提交于
If we load the complete EFER MSR on entry or exit, EFER.LMA (and LME) loading is skipped. Their consistency is already checked now before starting the transition. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Jan Kiszka 提交于
As we may emulate the loading of EFER on VM-entry and VM-exit, implement the checks that VMX performs on the guest and host values on vmlaunch/ vmresume. Factor out kvm_valid_efer for this purpose which checks for set reserved bits. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Jan Kiszka 提交于
The logic for checking if interrupts can be injected has to be applied also on NMIs. The difference is that if NMI interception is on these events are consumed and blocked by the VM exit. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Jan Kiszka 提交于
vmx_set_nmi_mask will soon be used by vmx_nmi_allowed. No functional changes. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Andrew Honig 提交于
If userspace creates and destroys multiple VMs within the same process we leak 20k of memory in the userspace process context per VM. This patch frees the memory in kvm_arch_destroy_vm. If the process exits without closing the VM file descriptor or the file descriptor has been shared with another process then we don't free the memory. It's still possible for a user space process to leak memory if the last process to close the fd for the VM is not the process that created it. However, this is an unexpected case that's only caused by a user space process that's misbehaving. Signed-off-by: NAndrew Honig <ahonig@google.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Once L1 loads VMCS12 we enable shadow-vmcs capability and copy all the VMCS12 shadowed fields to the shadow vmcs. When we release the VMCS12, we also disable shadow-vmcs capability. Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Synchronize between the VMCS12 software controlled structure and the processor-specific shadow vmcs Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Introduce a function used to copy fields from the software controlled VMCS12 to the processor-specific shadow vmcs Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Introduce a function used to copy fields from the processor-specific shadow vmcs to the software controlled VMCS12 Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Unmap vmcs12 and release the corresponding shadow vmcs Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Allocate a shadow vmcs used by the processor to shadow part of the fields stored in the software defined VMCS12 (let L1 access fields without causing exits). Note we keep a shadow vmcs only for the current vmcs12. Once a vmcs12 becomes non-current, its shadow vmcs is released. Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
handle_vmon doesn't check if L1 is already in root mode (VMXON was previously called). This patch adds this missing check and calls nested_vmx_failValid if VMX is already ON. We need this check because L0 will allocate the shadow vmcs when L1 executes VMXON and we want to avoid host leaks (due to shadow vmcs allocation) if L1 executes VMXON repeatedly. Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Refactor existent code so we re-use vmcs12_write_any to copy fields from the shadow vmcs specified by the link pointer (used by the processor, implementation-specific) to the VMCS12 software format used by L0 to hold the fields in L1 memory address space. Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Prepare vmread and vmwrite bitmaps according to a pre-specified list of fields. These lists are intended to specifiy most frequent accessed fields so we can minimize the number of fields that are copied from/to the software controlled VMCS12 format to/from to processor-specific shadow vmcs. The lists were built measuring the VMCS fields access rate after L2 Ubuntu 12.04 booted when it was running on top of L1 KVM, also Ubuntu 12.04. Note that during boot there were additional fields which were frequently modified but they were not added to these lists because after boot these fields were not longer accessed by L1. Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Add logic required to detect if shadow-vmcs is supported by the processor. Introduce a new kernel module parameter to specify if L0 should use shadow vmcs (or not) to run L1. Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Abel Gordon 提交于
Add definitions for all the vmcs control fields/bits required to enable vmcs-shadowing Signed-off-by: NAbel Gordon <abelg@il.ibm.com> Reviewed-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
-
- 18 4月, 2013 2 次提交
-
-
由 Yang Zhang 提交于
Fix the compile error with kvm_vm_ioctl_irq_line. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zhang, Yang Z 提交于
->send_IPI_mask is not defined on UP. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 17 4月, 2013 13 次提交
-
-
由 Scott Wood 提交于
complete_mmio_load writes back the mmio result into the destination register. Doing this on a store results in register corruption. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Stuart Yoder 提交于
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
This patch adds the one_reg interface to get the special instruction to be used for setting software breakpoint from userspace. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
-
由 Gleb Natapov 提交于
If guest vcpu is in VM86 mode the vcpu state should be checked as if in real mode. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Paolo Bonzini 提交于
KVM does not use the activity state VMCS field, and does not support it in nested VMX either (the corresponding bits in the misc VMX feature MSR are zero). Fail entry if the activity state is set to anything but "active". Since the value will always be the same for L1 and L2, we do not need to read and write the corresponding VMCS field on L1/L2 transitions, either. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Alexander Graf 提交于
Commit aa2fbe6d broke the ARM KVM target by introducing a new parameter to irq handling functions. Fix the function prototype to get things compiling again and ignore the parameter just like we did before Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NChristoffer Dall <cdall@cs.columbia.edu> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Yang Zhang 提交于
If posted interrupt is avaliable, then uses it to inject virtual interrupt to guest. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Yang Zhang 提交于
Only deliver the posted interrupt when target vcpu is running and there is no previous interrupt pending in pir. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Yang Zhang 提交于
We already know the trigger mode of a given interrupt when programming the ioapice entry. So it's not necessary to set it in each interrupt delivery. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Yang Zhang 提交于
Both TMR and EOI exit bitmap need to be updated when ioapic changed or vcpu's id/ldr/dfr changed. So use common function instead eoi exit bitmap specific function. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Yang Zhang 提交于
Detect the posted interrupt feature. If it exists, then set it in vmcs_config. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Yang Zhang 提交于
Posted Interrupt feature requires a special IPI to deliver posted interrupt to guest. And it should has a high priority so the interrupt will not be blocked by others. Normally, the posted interrupt will be consumed by vcpu if target vcpu is running and transparent to OS. But in some cases, the interrupt will arrive when target vcpu is scheduled out. And host will see it. So we need to register a dump handler to handle it. Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com> Acked-by: NIngo Molnar <mingo@kernel.org> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-