Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both functions are used nowhere.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's used only locally.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call line6_pcm_disconnect() at disconnect to make sure that all URBs
are cleared.  Also reduce the superfluous snd_pcm_stop() calls from
the function (and remove the unused function) since the streams are
guaranteed to be stopped at this point via snd_card_disconnect().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Calling line6_pcm_disconnect() at suspend callback is superfluous and
rather confusing.  Let's get rid of it.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is rather useless for a driver that has been already merged into
the official tree.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a fairly big rewrite regarding the card resource management in
line6 drivers:

- The card creation is moved into line6_probe().  This adds the global
  destructor to private_free, so that each driver doesn't have to call
  it any longer.

- The USB disconnect callback handles the card release, thus each
  driver needs to concentrate on only its own resources.  No need to
  snd_card_*() call in the destructor.

- Fix the potential stall in disconnection by removing
  snd_card_free().   It's replaced with snd_card_free_when_closed()
  for asynchronous release.

- The only remaining operation for the card in each driver is the call
  of snd_card_register().  All the rest are dealt in the common module
  by itself.

- These ended up with removal of audio.[ch] as a result of a reduction
  of one layer.  Each driver just needs to call line6_probe().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Kernel already shows the error in the common path.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's non-standard and rather superfluous.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split to each individual driver for POD, PODHD, TonePort and Variax
with a core LINE6 helper module.  The new modules follow the standard
ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd,
snd-usb-toneport and snd-usb-variax, together with the corresponding
CONFIG_SND_USB_* Kconfig items.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.

This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_disconnect() to call on disconnect is known at initialization.
Add a function pointer to the `usb_line6' struct and use to call into
the appropriate logic instead of evaluating the conditional logic.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_process_message() function (if any) to call when data is
received is known at initialization.  Add a function pointer to the
`usb_line6' struct and use to call into the appropriate logic instead
of evaluating the conditional logic for each message.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
audio endpoints for the interface.  Drop the conditional logic and make
these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
control endpoints for the interface.  Drop the conditional logic and
make these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the altsetting for the
interface.  Drop the conditional logic and make this value a property.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 0 of the TonePort UX2 and POD Studio
UX2 devices.  Use the device table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 1 of the Pocket POD.  Use the device
table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver uses a different altsetting depending on the interface.  Add
device type entries for each of these.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PODxt Live device has both a POD and a Variax interface.  Add device
type entries for each of these.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The `LINE6_CAP_CTRL_PCM_HW' macro combines three capabilities to save
horizontal space when defining the properties entries.  Now that these
are no longer limited to single lines this is not such a concern.
Specify capabilities individually when defining each property for
better clarity.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Specify the index of the properties entry explicitly to define this
structure more robustly.  Also, drop the `L6PROP' macro in favor of
initializing each member explicitly on its own line since horizontal
space is limited and more attributes will be added later.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Including "BIT" in the macro name is pointless.  Replace with "CAP" to
provide some context for what its value represents.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are now only used to build the device table.  Each entry in this
table is already clearly documented as to what device it maps to so the
macros become unnecessary indirection.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver currently uses the device's idProduct as input to several
switch statements.  In some cases this is not sufficiently granular and
the interface number must be taken into account.

Store the device type in `usb_line6' and key off of it instead.  New
types can then be added that map to specific interfaces on the device so
that this conditional logic can be flattened out.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current logic uses the index of the matched entry from the device
table as an offset to the corresponding properties entry.  The values
of the new `line6_device_type' enum are ordered such that they can be
used as an index into either of these arrays.  Drop the device entry
lookup logic and use the device type (via the .driver_info member)
instead.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Define an enum containing the supported devices and associate each entry
in the device table to the respective value.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Wrap USB_DEVICE to avoid repeating the Line 6 vendor ID.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Support for these devices appears to have never been completed.  Remove
them from the device table along with a minimal amount of supporting
code.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The `device_bit' member was no longer used as of commit 28079044
(staging: line6: drop MIDI parameter sysfs attrs).
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There is a strange "return 0" in line6_probe() before any initialization of
the module is done. It can lead to NULL pointer dereference in other functions.
The patch proposes to return -ENODEV in this case.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the more common kernel coding style.
Signed-off-by: NFabian Mewes <architekt@coding4coffee.org>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed some line over 80 characters.
Signed-off-by: NDavide Berardi <berardi.dav@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl issues in driver.c:
WARNING: unnecessary space after function pointer in driver.c
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for the Line 6 POD HD400 to the line6usb driver.
Signed-off-by: NChris Bajumpaa <cbajumpa@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following sparse warning in driver.c-
warning: restricted __le16 degrades to integer
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>